Modified logit life table system: Principles, empirical validation, and application

Despite its widespread use, the Coale-Demeny model life table system does not capture the extensive variation in age-specific mortality patterns observed in contemporary populations, particularly those of the countries of Eastern Europe and populations affected by HIV/AIDS. Although relational mortality models, such as the Brass logit system, can identify these variations, these models show systematic bias in their predictive ability as mortality levels depart from the standard. We propose a modification of the two-parameter Brass relational model. The modified model incorporates two additional age-specific correction factors (gamma(x), and theta(x)) based on mortality levels among children and adults, relative to the standard. Tests of predictive validity show deviations in age-specific mortality rates predicted by the proposed system to be 30-50 per cent lower than those predicted by the Coale-Demeny system and 15-40 per cent lower than those predicted using the original Brass system. The modified logit system is a two-parameter system, parameterized using values of l(5) and l(60).

Dynamic Modelling of Material Flows and Sustainable Resource Use: Case Studies in Regional Metabolism and Space Life Support Systems

Sustainable resource use is one of the most important environmental issues of our times. It is closely related to discussions on the 'peaking' of various natural resources serving as energy sources, agricultural nutrients, or metals indispensable in high-technology applications. Although the peaking theory remains controversial, it is commonly recognized that a more sustainable use of resources would alleviate negative environmental impacts related to resource use. In this thesis, sustainable resource use is analysed from a practical standpoint, through several different case studies. Four of these case studies relate to resource metabolism in the Canton of Geneva in Switzerland: the aim was to model the evolution of chosen resource stocks and flows in the coming decades. The studied resources were copper (a bulk metal), phosphorus (a vital agricultural nutrient), and wood (a renewable resource). In addition, the case of lithium (a critical metal) was analysed briefly in a qualitative manner and in an electric mobility perspective. In addition to the Geneva case studies, this thesis includes a case study on the sustainability of space life support systems. Space life support systems are systems whose aim is to provide the crew of a spacecraft with the necessary metabolic consumables over the course of a mission. Sustainability was again analysed from a resource use perspective. In this case study, the functioning of two different types of life support systems, ARES and BIORAT, were evaluated and compared; these systems represent, respectively, physico-chemical and biological life support systems. Space life support systems could in fact be used as a kind of 'laboratory of sustainability' given that they represent closed and relatively simple systems compared to complex and open terrestrial systems such as the Canton of Geneva. The chosen analysis method used in the Geneva case studies was dynamic material flow analysis: dynamic material flow models were constructed for the resources copper, phosphorus, and wood. Besides a baseline scenario, various alternative scenarios (notably involving increased recycling) were also examined. In the case of space life support systems, the methodology of material flow analysis was also employed, but as the data available on the dynamic behaviour of the systems was insufficient, only static simulations could be performed. The results of the case studies in the Canton of Geneva show the following: were resource use to follow population growth, resource consumption would be multiplied by nearly 1.2 by 2030 and by 1.5 by 2080. A complete transition to electric mobility would be expected to only slightly (+5%) increase the copper consumption per capita while the lithium demand in cars would increase 350 fold. For example, phosphorus imports could be decreased by recycling sewage sludge or human urine; however, the health and environmental impacts of these options have yet to be studied. Increasing the wood production in the Canton would not significantly decrease the dependence on wood imports as the Canton's production represents only 5% of total consumption. In the comparison of space life support systems ARES and BIORAT, BIORAT outperforms ARES in resource use but not in energy use. However, as the systems are dimensioned very differently, it remains questionable whether they can be compared outright. In conclusion, the use of dynamic material flow analysis can provide useful information for policy makers and strategic decision-making; however, uncertainty in reference data greatly influences the precision of the results. Space life support systems constitute an extreme case of resource-using systems; nevertheless, it is not clear how their example could be of immediate use to terrestrial systems.

Temperature-dependent fecundity and life table of the fennel aphid hyadaphis foeniculi (passerini) (hemiptera: aphididae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

LIFE TABLE ANALYSIS OF DIAPHORINA CITRI (HEMIPTERA: PSYLLIDAE) INFESTING SWEET ORANGE (CITRUS SINENSIS) IN SAO PAULO

An ecological life table for eggs and nymphs of Diaphorina citri Kuwayama (Hemiptera: Psyllidae) was constructed with data obtained from orange orchards (Citrus sinensis Osbeck) in 2 regions of the State of Sao Paulo, over 4 generations in the period from XI-2006 to V-2007, comprising spring, summer, and fall seasons. Young growing shoots with D. citri eggs present were identified, and live individuals were counted until adult emergence. No predatory arthropods were observed in association with D. citri eggs and nymphs during the study. The mean parasitism of fourth- and fifth-instar nymphs by Tamarixia radiata Waterston (Hymenoptera: Eulophidae) was 2.3%. The durations of the egg-adult period were similar among the 4 generations, ranging from 18.0 to 24.7 d (at mean temperatures ranging from 21.6 to 26.0 degrees C) and followed the temperature requirement models obtained in the laboratory for D. citri. However, survival from the egg to the adult stage for the same period varied considerably from 1.7 to 21.4%; the highest mortalities were observed in the egg and small nymphal (first- to thirdinstar) stages, which were considered to be key phases for population growth of the pest.

Reproduction and fertility life table of three aphid species (Macrosiphini) at different temperatures

Temperature is a key abiotic factor influencing the development and reproduction of aphids. The effect of temperature on the reproduction of three aphid species Aulacorthum solani (Kaltenbach), Macrosiphum euphorbiae (Thomas) and Uroleucon ambrosiae (Thomas) (Aphididae, Macrosiphini) has been investigated and fertility life tables were determined. Nymphs were reared in climatic chambers at temperatures of 16, 19, 22, 25, and 28 ± 1ºC, RH 70 ± 10% and 12 h photophase. Female adult aphids developed at these temperatures were then used in experiments in which pre-reproductive and reproductive periods were evaluated every 24 h. In addition, the number of nymphs produced and longevity were determined at each temperature. The reproduction period of A. solani and M. euphorbiae decreased with increasing temperature, whereas that of U. ambrosiae was maintained between 19 and 25ºC. The total number of nymphs produced by the aphids decreased as the temperature increased. The longevities of A. solani and M. euphorbiae decreased with increasing temperature but remained stable for U. ambrosiae between 19 and 25ºC. The largest survival rate (l x) and specific fertility (m x) values were found at 16 and 22ºC for all three species. The most favourable temperature for reproduction of A. solani, M. euphorbiae and U. ambrosiae was 22ºC, as demonstrated by the l x and m x profiles, the high values of net reproductive rates and intrinsic rates of increase, and the short intervals between generation and doubling times.

Fertility life table of Trichogramma pretiosum and Trichogramma acacioi on eggs of Anagasta kuehniella at different temperatures

Species of the Trichogramma genus are among the most important ones for biological control. The objective of this research was to evaluate parasitism potential of two species of Trichogramma on eggs of Anagasta kuheniella through life fertility table, at temperatures between 15ºC and 35ºC. These species were collected in the State of Espírito Santo parasitising eggs of the avocado defoliator Nipteria panacea. Trichogramma pretiosum and T. acacioi showed adequate reproductive potential between 15ºC and 35ºC which indicates possibilities of using them in biological control programs in avocado plantations.

Fertility life table of Trichogramma pretiosum and Trichogramma acacioi (Hymenoptera : Trichogrammatidae) on Sitotroga cerealella (Lepidoptera : Gelechiidae) eggs at different constant temperatures

Fertility life tables were developed for both Trichogramma pretiosum and Trichogramma acacioi reared on Sitotroga cerealella eggs as an alternative host at five different temperatures. The egg parasitoids were first collected from Nipteria panacea eggs, a lepidopterous pest of avocado. Egg parasitoid females were individualized in small glass vials along with 40 eggs of the host during 24 h for parasitization. For evaluation of the parasitism capacity, a similar procedure was adopted, but cardboards with eggs were replaced every day. The net reproductive rate (Ro), intrinsic rate of increase (rm), finite rate of increase (lambda), and mean generation time (T) were estimated. Temperature affected all parameters for both Trichogramma species. The highest fecundity for both species was observed at 25degreesC. Extreme temperatures such as 15degreesC or 35degreesC negatively affect the development rate of both species.

Biology and fertility life table of the South American fruit fly Anastrepha fraterculus on grape

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Length of life: a study of the life table (traduccion de capitulos escogidos)

Incluye Bibliografía

Towards a Model of Information Systems User Competency

The ability to utilize information systems (IS) effectively is becoming a necessity for business professionals. However, individuals differ in their abilities to use IS effectively, with some achieving exceptional performance in IS use and others being unable to do so. Therefore, developing a set of skills and attributes to achieve IS user competency, or the ability to realize the fullest potential and the greatest performance from IS use, is important. Various constructs have been identified in the literature to describe IS users with regard to their intentions to use IS and their frequency of IS usage, but studies to describe the relevant characteristics associated with highly competent IS users, or those who have achieved IS user competency, are lacking. This research develops a model of IS user competency by using the Repertory Grid Technique to identify a broad set of characteristics of highly competent IS users. A qualitative analysis was carried out to identify categories and sub-categories of these characteristics. Then, based on the findings, a subset of the model of IS user competency focusing on the IS-specific factors – domain knowledge of and skills in IS, willingness to try and to explore IS, and perception of IS value – was developed and validated using the survey approach. The survey findings suggest that all three factors are relevant and important to IS user competency, with willingness to try and to explore IS being the most significant factor. This research generates a rich set of factors explaining IS user competency, such as perception of IS value. The results not only highlight characteristics that can be fostered in IS users to improve their performance with IS use, but also present research opportunities for IS training and potential hiring criteria for IS users in organizations.

Laboratory Model Shaking Table; An Investigation of Defects and Suggested Improvements

The laboratory model is considered in this thesis. Information gained from this investigation has not been trans­ferred to the larger industrial machines. Some of the factors noted concerning the efficiency of the laboratory shaking table are inherent in this small scale model only.

Selection and hydroponic growth of bread wheat cultivars for bioregenerative life support systems

As part of the ESA-funded MELiSSA program, the suitability, the growth and the development of four bread wheat cultivars were investigated in hydroponic culture with the aim to incorporate such a cultivation system in an Environmental Control and Life Support System (ECLSS). Wheat plants can fulfill three major functions in space: (a) fixation of CO2 and production of O2, (b) production of grains for human nutrition and (c) production of cleaned water after condensation of the water vapor released from the plants by transpiration. Four spring wheat cultivars (Aletsch, Fiorina, Greina and CH Rubli) were grown hydroponically and compared with respect to growth and grain maturation properties. The height of the plants, the culture duration from germination to harvest, the quantity of water used, the number of fertile and non-fertile tillers as well as the quantity and quality of the grains harvested were considered. Mature grains could be harvested after around 160 days depending on the varieties. It became evident that the nutrient supply is crucial in this context and strongly affects leaf senescence and grain maturation. After a first experiment, the culture conditions were improved for the second experiment (stepwise decrease of EC after flowering, pH adjusted twice a week, less plants per m2) leading to a more favorable harvest (higher grain yield and harvest index). Considerably less green tillers without mature grains were present at harvest time in experiment 2 than in experiment 1. The harvest index for dry matter (including roots) ranged from 0.13 to 0.35 in experiment 1 and from 0.23 to 0.41 in experiment 2 with modified culture conditions. The thousand-grain weight for the four varieties ranged from 30.4 to 36.7 g in experiment 1 and from 33.2 to 39.1 g in experiment 2, while market samples were in the range of 39.4–46.9 g. Calcium levels in grains of the hydroponically grown wheat were similar to those from field-grown wheat, while potassium, magnesium, phosphorus, iron, zinc, copper, manganese and nickel levels tended to be higher in the grains of experimental plants. It remains a challenge for future experiments to further adapt the nutrient supply in order to improve senescence of vegetative plant parts, harvest index and the composition of bread wheat grains.