Non-Equilibrium Reaction Rates in the Macroscopic Chemistry Method for DSMC Calculations

The Direct Simulation Monte Carlo (DSMC) method is used to simulate the flow of rarefied gases. In the Macroscopic Chemistry Method (MCM) for DSMC, chemical reaction rates calculated from local macroscopic flow properties are enforced in each cell. Unlike the standard total collision energy (TCE) chemistry model for DSMC, the new method is not restricted to an Arrhenius form of the reaction rate coefficient, nor is it restricted to a collision cross-section which yields a simple power-law viscosity. For reaction rates of interest in aerospace applications, chemically reacting collisions are generally infrequent events and, as such, local equilibrium conditions are established before a significant number of chemical reactions occur. Hence, the reaction rates which have been used in MCM have been calculated from the reaction rate data which are expected to be correct only for conditions of thermal equilibrium. Here we consider artificially high reaction rates so that the fraction of reacting collisions is not small and propose a simple method of estimating the rates of chemical reactions which can be used in the Macroscopic Chemistry Method in both equilibrium and non-equilibrium conditions. Two tests are presented: (1) The dissociation rates under conditions of thermal non-equilibrium are determined from a zero-dimensional Monte-Carlo sampling procedure which simulates ‘intra-modal’ non-equilibrium; that is, equilibrium distributions in each of the translational, rotational and vibrational modes but with different temperatures for each mode; (2) The 2-D hypersonic flow of molecular oxygen over a vertical plate at Mach 30 is calculated. In both cases the new method produces results in close agreement with those given by the standard TCE model in the same highly nonequilibrium conditions. We conclude that the general method of estimating the non-equilibrium reaction rate is a simple means by which information contained within non-equilibrium distribution functions predicted by the DSMC method can be included in the Macroscopic Chemistry Method.

Echocardiographic Abnormalities and Antiphospholipid Antibodies in Patients with Systemic Lupus Erythematosus

OBJECTIVE: Lupus anticoagulant and anticardiolipin antibodies (aCL) have been associated with thrombosis, recurrent abortion, and thrombocytopenia in patients with systemic lupus erythematosus (SLE), but their relationship with cardiac disease is less clear. The purpose of this study was to evaluate the association between antiphospholipid antibodies (aPL) and echocardiographic abnormalities in patients with SLE. METHODS: A total of 70 consecutive patients and 42 control subjects underwent M-mode, 2-dimensional and Doppler echocardiography and tests for lupus anticoagulant, aCL IgG, IgM, and IgA. Lupus anticoagulant was assayed with the dilute Russell viper venom time, and aCL IgG, IgM, and IgA were measured by an enzyme-linked immunosorbent assay (ELISA). RESULTS: Lupus anticoagulant showed a prevalence of 10%. As a whole, aCL had a prevalence of 44.3% and aPL had a prevalence of 50%. Patients with echocardiographic abnormalities had a prevalence of 54.3% and showed a trend towards an association with aCL IgG (P=0.06). The presence of pulmonary hypertension (PH) was significantly associated with aCL IgG (p=0.02). CONCLUSION: aCL IgG was significantly associated with PH and showed a strong trend towards an association with echocardiographic abnormalities taken together. These findings suggest a role for aCL IgG in the development of lupus cardiovascular disease.

Triatoma sordida Stål 1859 (Hemiptera, Reduviidae: Triatominae) in palms of northeastern Argentina

Several palms species provide an important habitat for triatomines and associate vertebrates in tropical America. The objective of this work is to identify the triatomine species living in the palms of rural areas in the Province of Corrientes, and to estimate the potential epidemiological risk they represent for the residents of nearby houses. The survey was carried out in a palm community in Colonia Laurel, Department San Roque, Province of Corrientes, Argentina. Samplings were performed in October, November and December 1998; January, February and March 1999; May and June 1999. Thirty palms: 27 (90%) Butia yatay (Mart.) Becc. and 3 Acrocomia aculeata (Jacq.) Lodd ex Mart. were dissected. Triatoma sordida Stål 1859 was found in 96.2% of B. yatay and in all the A. aculeata palms. A total of 272 live T. sordida was collected; 36 of them (13.2%) were found in bird nests in the frond and the remainder in other locations of the tree. The mean number of triatomines per palm was 9.6 (range 1-60, mode 2). T. sordida was collected during all the sampling months and all stages were present at all seasons. The highest population density was reached in spring and the lowest in autumn. Trypanosoma cruzi was detected in 38.5% in feces of 174 examined insects and identified as such, both by microscopical examination and PCR. This is the first finding of T. sordida populations in B. yatay, an endemic palm of South America distributed in southern Brazil, Uruguay and northeastern Argentina. The high infection prevalence found in this work suggests that T. sordida plays an essential role in the maintenance of the wild T. cruzi transmission cycle in northeastern Argentina.

Les rapports université/entreprise à l’Université Nationale Autonome du Mexique (UNAM) : la vision de professeurs ayant de l’expérience de collaboration avec des entreprises

Cette thèse porte sur le rapport université/entreprise au Mexique après 1990. Il s’agit d’une étude de cas sur l’Université Nationale Autonome du Mexique (UNAM), la plus grande université mexicaine et la plus importante institution productrice de connaissances scientifiques au pays. À partir de 1988, l’introduction au Mexique d’une économie du marché a été le point de départ des nombreux changements politiques et économiques qui ont modifié les conditions d’exploitation des organisations et des institutions au pays. Ainsi, depuis 1990, le nouveau contexte politique et économique du Mexique a modifié les politiques gouvernementales vers les institutions publiques y compris celles de la santé et de l’éducation. Pour ce qui est des universités publiques mexicaines, ces politiques ont réduit leur financement et leur ont demandé une participation plus active à l’économie nationale, par la production de connaissances pouvant se traduire en innovation dans le secteur de la production. Ces nouvelles conditions économiques et politiques constituent des contingences auxquelles les universitaires font face de diverses façons, y compris l’établissement des relations avec les entreprises, comme le prescrivent les politiques du gouvernement fédéral élaborées sur la base des recommandations de l’OCDE. En vue de contribuer à la connaissance des relations université/entreprise développées au Mexique, nous avons réalisé notre étude de cas fondée sur une approche méthodologique qualitative à caractère exploratoire qui a recueilli des données provenant de sources documentaires et perceptuelles. Nous avons encadré notre recherche du point de vue de l’organisation par la théorie de la contingence, et pour l’analyse de la production de la connaissance sur la base des modèles de la Triple hélice et du Mode 2. Différents documents de sources diverses, y compris l’Internet, ont été consultés pour l’encadrement des rapports université/entreprise au Mexique et à l’UNAM. Les sources perceptuelles ont été 51 entrevues semi-structurées auprès de professeurs et de chercheurs à temps plein ayant établi des rapports avec des entreprises (dans les domaines de la biomédecine, la biotechnologie, la chimie et l’ingénierie) et de personnes ayant un rôle de gestion dans les rapports des entreprises avec l’institution. Les données recueillies ont montré que la politique de l’UNAM sur les rapports université/entreprise a été aussi flottante que la structure organisationnelle soutenant sa création et formalisation. Toutes sortes d’entreprises, publiques ou privées collaborent avec les chercheurs de l’UNAM, mais ce sont les entreprises parastatales et gouvernementales qui prédominent. À cause du manque d’infrastructure scientifique et technologique de la plupart des entreprises au Mexique, les principales demandes adressées à l’UNAM sont pour des services techniques ou professionnels qui aident les entreprises à résoudre des problèmes ponctuels. Le type de production de connaissance à l’UNAM continue d’être celui du Mode 1 ou traditionnel. Néanmoins, particulièrement dans le domaine de la biotechnologie, nous avons identifié certains cas de collaboration plus étroite qui pointaient vers l’innovation non linéaire proposée par le Mode 2 et la Triple hélice. Parmi les principaux avantages découlant des rapports avec les entreprises les interviewés ont cité l’obtention de ressources additionnelles pour la recherche, y compris de l’équipement et des fonds pour les bourses d’étudiants, mais souvent ils ont observé que l’un des plus gros avantages était la connaissance qu’ils obtenaient des contacts avec les firmes et le sens du réel qu’ils pouvaient intégrer dans la formation des étudiants. Les programmes gouvernementaux du CONACYT pour la science, la technologie et l’innovation ne semblent pas réussir à renforcer les rapports entre les institutions génératrices de la connaissance et le secteur de la production du Mexique.

Resultados del tratamiento de nevos melanocíticos con láser

Introducción A pesar de que los nevos melanocíticos son un motivo de consulta frecuente en nuestra población no existen estudios a nivel de Colombia acerca de su tratamiento, a nivel mundial existe muy poca literatura al respecto por lo que hay un vacío conceptual en este campo. Objetivos Evaluar los cambios en cuanto a la presencia de pigmento y cicatrización, en los nevos melanocíticos adquiridos tratados con láser, basados en la experiencia de un solo centro en Bogotá. Materiales y métodos Es un estudio observacional de antes y después, en una cohorte histórica, de 90 casos de nevos melanocíticos adquiridos, tratados con láser en Uniláser Medica, en los que se evaluó la presencia de pigmento, cicatrización, y otras variables, con un control realizado a no menos de 3 meses de la intervención. Resultados Se encontró un rango de edad entre los 18 -51 años, promedio 27,59 años; fototipo de III-V; en el 32% de los casos, solo fue requerida una sesión de láser de Co2 y Erbio, para el aclaramiento completo de la misma. La duración del eritema en el 54,4% los casos fue de 1 a 3 meses. En un 64,4% quedó pigmento residual al control, pero de éstos casos el 48,2% fue entre un 5 a un 10% del inicial. El 58,9% hizo cicatriz, de éstos el 63% fue estética. La satisfacción por parte de los pacientes es alta a pesar de la persistencia pigmentaria y/o la presencia de cicatriz. Discusión El tratamiento de nevos melanocíticos adquiridos con láser es una opción terapéutica que genera cambios estadísticamente significativos en cuanto a pigmento, cicatriz estética y alta satisfacción por parte de los pacientes. Se requieren estudios, analíticos, para determinar eficacia del tratamiento.

Research by Design is up and running

This paper explores the context of and developments in Research by Design (RbD) as currently developing in Schools of Architecture. It starts from noticing that the design studio is the core of the bachelor and master curriculum. Extending this position to PhD research implies the search for research where the design process is the main method of researching and creating knowledge and understanding. These developments connect to similar developments in the arts. Mode 1 and mode 2 knowledge, reflection and other knowledge processes are the base for developing knowledge for the field of architecture when practice and designing are the main method of research. The paper concludes with observing many PhD and research projects building on design activities and practice are currently under way and are supported by academia. They produce a specific type of knowledge and understanding, usually opening up problems and exploring boundaries.

Forum theorizing in the context of professional practice: The case for middle-range theories

This commentary seeks to complement the contribution of the Building Research & Information special issue on 'Developing Theories for the Built Environment' (2008) by highlighting the important role of middle-range theories within the context of professional practice. Middle-range theories provide a form of theorizing that lies between abstract grand theorizing and atheoretical local descriptions. They are also characterized by the way in which they directly engage with the concerns of practitioners. In the context of professional practice, any commitment to theorizing should habitually be combined with an equivalent commitment to empirical research; rarely is it appropriate to neglect one in favour of the other. Any understanding of the role that theory plays in professional practice must further be informed by Schon's seminal ideas on reflective practice. Practitioners are seen to utilize theories as inputs to a process of continuous reflection, thereby guarding against complacency and routinization. The authors would challenge any assumption that academics alone are responsible for generating theories, thereby limiting the role of practitioners to their application. Such a dichotomized view is contrary to established ideas on Mode 2 knowledge production and current trends towards co-production research in the context of the built environment.

The challenges of creating actionable knowledge: an action research perspective

Academia has a critical role in developing new knowledge which construction industry practitioners need to envision, undertake and sustain successful innovation. The new knowledge produced by academia, however, often does not satisfy the needs of practitioners. This unsatisfactory state of affairs is frequently taken to be the consequence of the cultural, motivational and operational differences between the two communities. Actionable knowledge is presented as a useful concept which can fuse the expectations, contributions and outputs of academia and practitioners. Within this context, action research is argued to be an appropriate methodology to develop successful actionable knowledge. Results from an action research project are given which provide researchers and practitioners greater understanding of the key factors that shape the degree to which action research produces actionable knowledge: change focus, collaboration capabilities and systematic process. The criteria intrinsic to Mode 2 research (Gibbons et al., 1994) are demonstrated to have utility in evidencing actionable knowledge. The implication for policy is that there is a need to develop and use appropriate actionable knowledge frameworks and measures to design funding calls, and to evaluate research proposals and outputs.

Learning across business sectors: context, embeddedness and conceptual chasms

While the construction industry is frequently encouraged to learn from other business sectors, the difficulties of transferring knowledge from one context to another are rarely acknowledged. The problematic nature of knowledge is addressed with particular emphasis on the concept of contextual embeddedness. From this point of view, the process of 'knowledge transfer' depends upon a prolonged process of socialization between actors from both the 'receiving' and 'sending' contexts networking. It is contended that a significant conceptual chasm exists between the exhortations of industry leaders to learn from other sectors and the theoretical complexities associated with knowledge transfer. An ongoing research project is described that seeks to facilitate knowledge sharing between construction and aerospace. A novel approach to knowledge sharing based upon soft systems methodology (SSM) (Mode 2) is described and justified. Initial findings from the first cycle of the research are discussed and used to highlight the importance of context in the implementation of supply chain management.

Aerosol and precipitation chemistry measurements in a remote site in Central Amazonia: the role of biogenic contribution

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aerosol and precipitation chemistry measurements in a remote site in Central Amazonia: the role of biogenic contribution

In this analysis a 3.5 years data set of aerosol and precipitation chemistry, obtained in a remote site in Central Amazonia (Balbina, (1A degrees 55' S, 59A degrees 29' W, 174 m a.s.l.), about 200 km north of Manaus) is discussed. Aerosols were sampled using stacked filter units (SFU), which separate fine (d < 2.5 mu m) and coarse mode (2.5 mu m < d < 10.0 mu m) aerosol particles. Filters were analyzed for particulate mass (PM), Equivalent Black Carbon (BCE) and elemental composition by Particle Induced X-Ray Emission (PIXE). Rainwater samples were collected using a wet-only sampler and samples were analyzed for pH and ionic composition, which was determined using ionic chromatography (IC). Natural sources dominated the aerosol mass during the wet season, when it was predominantly of natural biogenic origin mostly in the coarse mode, which comprised up to 81% of PM10. Biogenic aerosol from both primary emissions and secondary organic aerosol dominates the fine mode in the wet season, with very low concentrations (average 2.2 mu g m(-3)). Soil dust was responsible for a minor fraction of the aerosol mass (less than 17%). Sudden increases in the concentration of elements as Al, Ti and Fe were also observed, both in fine and coarse mode (mostly during the April-may months), which we attribute to episodes of Saharan dust transport. During the dry periods, a significant contribution to the fine aerosols loading was observed, due to the large-scale transport of smoke from biomass burning in other portions of the Amazon basin. This contribution is associated with the enhancement of the concentration of S, K, Zn and BCE. Chlorine, which is commonly associated to sea salt and also to biomass burning emissions, presented higher concentration not only during the dry season but also for the April-June months, due to the establishment of more favorable meteorological conditions to the transport of Atlantic air masses to Central Amazonia. The chemical composition of rainwater was similar to those ones observed in other remote sites in tropical forests. The volume-weighted mean (VWM) pH was 4.90. The most important contribution to acidity was from weak organic acids. The organic acidity was predominantly associated with the presence of acetic acid instead of formic acid, which is more often observed in pristine tropical areas. Wet deposition rates for major species did not differ significantly between dry and wet season, except for NH4+, citrate and acetate, which had smaller deposition rates during dry season. While biomass burning emissions were clearly identified in the aerosol component, it did not present a clear signature in rainwater. The biogenic component and the long-range transport of sea salt were observed both in aerosols and rainwater composition. The results shown here indicate that in Central Amazonia it is still possible to observe quite pristine atmospheric conditions, relatively free of anthropogenic influences.

Iodine speciation in atmospheric aerosols in the marine boundary layer

Iodine chemistry plays an important role in the tropospheric ozone depletion and the new particle formation in the Marine Boundary Layer (MBL). The sources, reaction pathways, and the sinks of iodine are investigated using lab experiments and field observations. The aims of this work are, firstly, to develop analytical methods for iodine measurements of marine aerosol samples especially for iodine speciation in the soluble iodine; secondly, to apply the analytical methods in field collected aerosol samples, and to estimate the characteristics of aerosol iodine in the MBL. Inductively Coupled Plasma – Mass Spectrometry (ICP-MS) was the technique used for iodine measurements. Offline methods using water extraction and Tetra-methyl-ammonium-hydroxide (TMAH) extraction were applied to measure total soluble iodine (TSI) and total insoluble iodine (TII) in the marine aerosol samples. External standard calibration and isotope dilution analysis (IDA) were both conducted for iodine quantification and the limits of detection (LODs) were both 0.1 μg L-1 for TSI and TII measurements. Online couplings of Ion Chromatography (IC)-ICP-MS and Gel electrophoresis (GE)-ICP-MS were both developed for soluble iodine speciation. Anion exchange columns were adopted for IC-ICP-MS systems. Iodide, iodate, and unknown signal(s) were observed in these methods. Iodide and iodate were separated successfully and the LODs were 0.1 and 0.5 μg L-1, respectively. Unknown signals were soluble organic iodine species (SOI) and quantified by the calibration curve of iodide, but not clearly identified and quantified yet. These analytical methods were all applied to the iodine measurements of marine aerosol samples from the worldwide filed campaigns. The TSI and TII concentrations (medians) in PM2.5 were found to be 240.87 pmol m-3 and 105.37 pmol m-3 at Mace Head, west coast of Ireland, as well as 119.10 pmol m-3 and 97.88 pmol m-3 in the cruise campaign over the North Atlantic Ocean, during June – July 2006. Inorganic iodine, namely iodide and iodate, was the minor iodine fraction in both campaigns, accounting for 7.3% (median) and 5.8% (median) in PM2.5 iodine at Mace Head and over the North Atlantic Ocean, respectively. Iodide concentrations were higher than iodate in most of the samples. In the contrast, more than 90% of TSI was SOI and the SOI concentration was correlated significantly with the iodide concentration. The correlation coefficients (R2) were both higher than 0.5 at Mace Head and in the first leg of the cruise. Size fractionated aerosol samples collected by 5 stage Berner impactor cascade sampler showed similar proportions of inorganic and organic iodine. Significant correlations were obtained in the particle size ranges of 0.25 – 0.71 μm and 0.71 – 2.0 μm between SOI and iodide, and better correlations were found in sunny days. TSI and iodide existed mainly in fine particle size range (< 2.0 μm) and iodate resided in coarse range (2.0 – 10 μm). Aerosol iodine was suggested to be related to the primary iodine release in the tidal zone. Natural meteorological conditions such as solar radiation, raining etc were observed to have influence on the aerosol iodine. During the ship campaign over the North Atlantic Ocean (January – February 2007), the TSI concentrations (medians) ranged 35.14 – 60.63 pmol m-3 among the 5 stages. Likewise, SOI was found to be the most abundant iodine fraction in TSI with a median of 98.6%. Significant correlation also presented between SOI and iodide in the size range of 2.0 – 5.9 μm. Higher iodate concentration was again found in the higher particle size range, similar to that at Mace Head. Airmass transport from the biogenic bloom region and the Antarctic ice front sector was observed to play an important role in aerosol iodine enhancement. The TSI concentrations observed along the 30,000 km long cruise round trip from East Asia to Antarctica during November 2005 – March 2006 were much lower than in the other campaigns, with a median of 6.51 pmol m-3. Approximately 70% of the TSI was SOI on average. The abundances of inorganic iodine including iodine and iodide were less than 30% of TSI. The median value of iodide was 1.49 pmol m-3, which was more than four fold higher than that of iodate (median, 0.28 pmol m-3). Spatial variation indicated highest aerosol iodine appearing in the tropical area. Iodine level was considerably lower in coastal Antarctica with the TSI median of 3.22 pmol m-3. However, airmass transport from the ice front sector was correlated with the enhance TSI level, suggesting the unrevealed source of iodine in the polar region. In addition, significant correlation between SOI and iodide was also shown in this campaign. A global distribution in aerosol was shown in the field campaigns in this work. SOI was verified globally ubiquitous due to the presence in the different sampling locations and its high proportion in TSI in the marine aerosols. The correlations between SOI and iodide were obtained not only in different locations but also in different seasons, implying the possible mechanism of iodide production through SOI decomposition. Nevertheless, future studies are needed for improving the current understanding of iodine chemistry in the MBL (e.g. SOI identification and quantification as well as the update modeling involving organic matters).

Flugzeuggetragene in-situ Messungen zur Eis- und Flüssigphase troposphärischer Wolken

Die Mikrophysik in Wolken bestimmt deren Strahlungseigenschaften und beeinflusst somit auch den Strahlungshaushalt des Planeten Erde. Aus diesem Grund werden im Rahmen der vorliegenden Arbeit die mikrophysikalischen Charakteristika von Cirrus-Wolken sowie von arktischen Grenzschicht-Wolken behandelt. Die Untersuchung dieser Wolken wurde mithilfe verschiedener Instrumente verwirklicht, welche Partikel in einem Durchmesserbereich von 250nm bis zu 6.4mm vermessen und an Forschungsflugzeugen montiert werden. Ein Instrumentenvergleich bestätigt, dass innerhalb der Bereiche in denen sich die Messungen dieser Instrumente überlappen, die auftretenden Diskrepanzen als sehr gering einzustufen sind. Das vorrangig verwendete Instrument trägt die Bezeichnung CCP (Cloud Combination Probe) und ist eine Kombination aus einem Instrument, das Wolkenpartikel anhand von vorwärts-gerichtetem Streulicht detektiert und einem weiteren, das zweidimensionale Schattenbilder einzelner Wolkenpartikel aufzeichnet. Die Untersuchung von Cirrus-Wolken erfolgt mittels Daten der AIRTOSS-ICE (AIRcraft TOwed Sensor Shuttle - Inhomogeneous Cirrus Experiment) Kampagne, welche im Jahr 2013 über der deutschen Nord- und Ostsee stattfand. Parameter wie Partikeldurchmesser, Partikelanzahlkonzentration, Partikelform, Eiswassergehalt, Wolkenhöhe und Wolkendicke der detektierten Cirrus-Wolken werden bestimmt und im Kontext des aktuellen Wissenstandes diskutiert. Des Weiteren wird eine beprobte Cirrus-Wolke im Detail analysiert, welche den typischen Entwicklungsprozess und die vertikale Struktur dieser Wolkengattung widerspiegelt. Arktische Grenzschicht-Wolken werden anhand von Daten untersucht, die während der VERDI (VERtical Distribution of Ice in Arctic Clouds) Kampagne im Jahr 2012 über der kanadischen Beaufortsee aufgezeichnet wurden. Diese Messkampagne fand im Frühling statt, um die Entwicklung von Eis-Wolken über Mischphasen-Wolken bis hin zu Flüssigwasser-Wolken zu beobachten. Unter bestimmten atmosphärischen Bedingungen tritt innerhalb von Mischphasen-Wolken der sogenannte Wegener-Bergeron-Findeisen Prozess auf, bei dem Flüssigwassertropfen zugunsten von Eispartikeln verdampfen. Es wird bestätigt, dass dieser Prozess anhand von mikrophysikalischen Messungen, insbesondere den daraus resultierenden Größenverteilungen, nachweisbar ist. Darüber hinaus wird eine arktische Flüssigwasser-Wolke im Detail untersucht, welche im Inneren das Auftreten von monomodalen Tröpfchen-Größenverteilungen zeigt. Mit zunehmender Höhe wachsen die Tropfen an und die Maxima der Größenverteilungen verschieben sich hin zu größeren Durchmessern. Dahingegen findet im oberen Übergangsbereich dieser Flüssigwasser-Wolke, zwischen Wolke und freier Atmosphäre, ein Wechsel von monomodalen zu bimodalen Tröpfchen-Größenverteilungen statt. Diese weisen eine Mode 1 mit einem Tropfendurchmesser von 20μm und eine Mode 2 mit einem Tropfendurchmesser von 10μm auf. Das dieses Phänomen eventuell typisch für arktische Flüssigwasser-Wolken ist, zeigen an dem Datensatz durchgeführte Analysen. Mögliche Entstehungsprozesse der zweiten Mode können durch Kondensation von Wasserdampf auf eingetragenen Aerosolpartikeln, die aus einer Luftschicht oberhalb der Wolke stammen oder durch Wirbel, welche trockene Luftmassen in die Wolke induzieren und Verdampfungsprozesse von Wolkentröpfchen hervorrufen, erklärt werden. Unter Verwendung einer direkten numerischen Simulation wird gezeigt, dass die Einmischung von trockenen Luftmassen in den Übergangsbereich der Wolke am wahrscheinlichsten die Ausbildung von Mode 2 verursacht.