Reconfigurable antenna for mobile terminal

Trabalho Final de Mestrado para obtenção do grau de Mestrado em Engenharia Electrónica e Telecomunicações

Mobile terminal adaptation in portal for better usability

Elektroniset finanssipalvelut, erityisesti Internetin kautta käytettynä, on kasvava alue. Elektronisten finanssipalveluiden tarjoajan tulee pystyä tarjoamaan laaja käytettävyys kaikkien kanavien kautta. Laajan käytettävyyden avulla asiakas voi valita haluamansa kanavan haluamanaan aikana. Palveluntarjoajalla tulee olla joustava arkkitehtuuri pystyäkseen tukemaan asiakkaiden muuttuvia vaatimuksia. Joustavalla arkkitehtuurilla päätelaitteeseen mukautuminen on mahdollista ja näin palveluntarjoaja pystyy tarjoamaan tuen monille eri päätelaitteille ja teknologioille helposti ja nopeasti. Diplomityö keskittyy tutkimaan mahdollisuutta monen kanavan tukeen ja päätelaitteeseen mukautumista Nordean tulevassa finanssiportaaliratkaisussa. Tämä pitäisi olla mahdollista uuden arkkitehtuurin kanssa, jonka TietoEnator on toteuttanut yhteistyössä Nordean kanssa. Sivujen rakenteen uudelleenjärjestelyillä saatiin hyviä tuloksia. Nykyisestä arkkitehtuurissa löydettiin myös puutteita ja jäljelle jäi avoimia kysymyksiä, jotka kirjattiin ylös. On selvästi nähtävissä, että tehokas päätelaitteeseen mukautuminen ja tuki monelle kanavalle tuo hyötyjä sekä pankille että asiakkaalle.

Positioning Wireless Mobile Terminal Devices

Positioning techniques enable the positioning of mobile transportation vehicles. Location information can be used in transport planning as well as in vehicles. Information can also be transferred between vehicles and transport planning. For example, pickup and delivery information and route instructions can be exchanged wirelessly. In this thesis, techniques suitable for positioning vehicles are studied, as well as techniques enabling wireless connectivity of the vehicles to the transport planning system. A prototype based on one positioning and connectivity technique is implemented. As a result, a system capable of positioning vehicles is created. The vehicles can be located almost in real-time. The accuracy in positioning is sufficient to visualise the locations on a good quality 1:20000 city map.

Adaptive Protocol Stacks for Mobile Devices

Tulevaisuudessa siirrettävät laitteet, kuten matkapuhelimet ja kämmenmikrot, pystyvät muodostamaan verkkoyhteyden käyttäen erilaisia yhteysmenetelmiä eri tilanteissa. Yhteysmenetelmillä on toisistaan poikkeavat viestintäominaisuudet mm. latenssin, kaistanleveyden, virhemäärän yms. suhteen. Langattomille yhteysmenetelmille on myös ominaista tietoliikenneyhteyden ominaisuuksien voimakas muuttuminen ympäristön suhteen. Parhaan suorituskyvyn ja käytettävyyden saavuttamiseksi, on siirrettävän laitteen pystyttävä mukautumaan käytettyyn viestintämenetelmään ja viestintäympäristössä tapahtuviin muutoksiin. Olennainen osa tietoliikenteessä ovat protokollapinot, jotka mahdollistavat tietoliikenneyhteyden järjestelmien välillä tarjoten verkkopalveluita päätelaitteen käyttäjäsovelluksille. Jotta protokollapinot pystyisivät mukautumaan tietyn viestintäympäristön ominaisuuksiin, on protokollapinon käyttäytymistä pystyttävä muuttamaan ajonaikaisesti. Perinteisesti protokollapinot ovat kuitenkin rakennettu muuttumattomiksi niin, että mukautuminen tässä laajuudessa on erittäin vaikeaa toteuttaa, ellei jopa mahdotonta. Tämä diplomityö käsittelee mukautuvien protokollapinojen rakentamista käyttäen komponenttipohjaista ohjelmistokehystä joka mahdollistaa protokollapinojen ajonaikaisen muuttamisen. Toteuttamalla esimerkkijärjestelmän, ja mittaamalla sen suorituskykyä vaihtelevassa tietoliikenneympäristössä, osoitamme, että mukautuvat protokollapinot ovat mahdollisia rakentaa ja ne tarjoavat merkittäviä etuja erityisesti tulevaisuuden siirrettävissä laitteissa.

Depth filtering for auto-stereoscopic mobile devices

In this work we address a scenario where 3D content is transmitted to a mobile terminal with 3D display capabilities. We consider the use of 2D plus depth format to represent the 3D content and focus on the generation of synthetic views in the terminal. We evaluate different types of smoothing filters that are applied to depth maps with the aim of reducing the disoccluded regions. The evaluation takes into account the reduction of holes in the synthetic view as well as the presence of geometrical distortion caused by the smoothing operation. The selected filter has been included within an implemented module for the VideoLan Client (VLC) software in order to render 3D content from the 2D plus depth data format.

Indoor location using fingerprinting and fuzzy logic

Indoor location systems cannot rely on technologies such as GPS (Global Positioning System) to determine the position of a mobile terminal, because its signals are blocked by obstacles such as walls, ceilings, roofs, etc. In such environments. The use of alternative techniques, such as the use of wireless networks, should be considered. The location estimation is made by measuring and analysing one of the parameters of the wireless signal, usually the received power. One of the techniques used to estimate the locations using wireless networks is fingerprinting. This technique comprises two phases: in the first phase data is collected from the scenario and stored in a database; the second phase consists in determining the location of the mobile node by comparing the data collected from the wireless transceiver with the data previously stored in the database. In this paper an approach for localisation using fingerprinting based on Fuzzy Logic and pattern searching is presented. The performance of the proposed approach is compared with the performance of classic methods, and it presents an improvement between 10.24% and 49.43%, depending on the mobile node and the Fuzzy Logic parameters.ł

3G SGSN Toiminnallisuustestauksen Automatisointi

3G SGSN (3rd Generation Serving GPRS Support Node) onUMTS (Universal Mobile Telecommunications System) pakettiverkon verkkoelementti, joka toimii linkkinä ulkoisen verkon(kuten Internet) ja radioverkon välillä. 3G SGSN ylläpitää tilaajan tietoja ja paikannustietoja päätelaitteen liikkuessa verkon sisällä ja välittää myös dataa ulkoisen verkon ja mobiilipäätelaitteen välillä. Tämän diplomityön aiheena on 3G SGSN toiminnallisuus-testauksen automatisointi. Työssä kehitetään 3G SGSN toiminnallisuustestaukseen soveltuva testauksen automatisointijärjestelmä Linux-ympäristössä AuTS (Automated Test Sequences)-automatisointityökalulla. Kehitystyöhön kuuluu järjestelmän suunnittelu ja toteutus. Toteutettu automatisointijärjestelmä suorittaa 3G SGSN toiminnallisuustestauksen istunnon- ja liikkuvuudenhallinnan testitapauksia.Suoritettujen testitapausten tuloksista luodaan HTML (Hypertext Markup Language)-raportti, joka sisältää tiedot ja analyysit suoritetuista testitapauksista sekä linkit testitapausten lokitietoihin. Hyvä automatisointi vaatii suunnittelua, jossa huomioidaan käytettävyys ja ylläpidettävyys. Näihin ominaisuuksiin on toteutuksessa kiinnitetty erityistä huomiota. Lopputuloksena saatiin toimiva automatisointijärjestelmä, joka osoittaa automatisoinnin tuovan huomattavia etuja toiminnallisuustestauksen tehokkuuteen. Työssä käsitelläänmyös ohjelmistotestausta sekä testauksen automatisointia ja niiden periaatteita.

Development and Analysis of a Compact Dual-Band Coplanar Antenna

The coplanar wave guide is an attractive device in microwave integrated circuits due to its uniplanar nature, ease of fabrication and low production cost. Several attempts are already done to explore the radiating modes in coplanar wave guide transmission lines. Usually coplanar wave guides are excited by an SMA connector with its centre conductor connected to the exact middle of the centre strip and the outer ground conductor to the two ground strips. The mode excited on it is purely a bound mode. The E-field distribution in the two slots are out of phase and there for cancels at the far field. This thesis addresses an attempt to excite an in phase E-field distribution in the two slots of the co planar wave guide by employing a feed asymmetry, in order to get radiation from the two large slot discontinuities of the coplanar waveguide. The omni directional distribution of the radiating energy can be achieved by widening the centre strip.The first part of the thesis deals with the investigations on the resonance phenomena of conventional coplanar waveguides at higher frequency bands. Then an offset fed open circuited coplanar waveguide supporting resonance/radiation phenomena is analyzed. Finally, a novel compact co planar antenna geometry with dual band characteristics, suitable for mobile terminal applications is designed and characterized using the inferences from the above study.

Investigations on the Radiation Characteristics of Broadband Strip Loaded Slotted Microstrip Antennas

With the recent progress and rapid increase in mobile terminals, the design of antennas for small mobile terminals is acquiring great importance. In view of this situation, several design concepts are already been addressed by the scientists and engineers. Compactness and efficiency are the major criteria for mobile terminal antennas. The challenging task of the microwave scientists and engineers is to device compact printed radiating systems having broadband behavior, together with good efficiency. Printed antenna technology has received popularity among antenna scientists after the introduction of microstrip antenna in 1970s. The successors in this kind such as printed monopoles and planar inverted F are also equally important. Scientists and Engineers are trying to explore this technology as a viable coast effective solution for forthcoming microwave revolution. The transmission line perspectives of antennas are very interesting. The concept behind any electromagnetic radiator is simple. Any electromagnetic system with a discontinuity is radiating electromagnetic energy. The size, shape and the orientation of the discontinuities controls the radiation characteristics of the system such as radiation pattern, gain, polarization etc. It can be either resonant or non resonant structure. Microstrip antennas are suitable for wireless applications due to their low cost, high gain and ease of fabrication. But the major disadvantage of micro strip antennas is their inherent narrow bandwidth. A lot of techniques are introduced by the researchers all over the world to enhance the bandwidth of micro strip patch antennas. The thesis addresses an attempt to enhance the bandwidth of micro strip patch antennas by incorporating impedance matching strip as a part of the micro strip patch antenna. The first part of the thesis deals with the broadband operation of the tilted square slot and polygonal slot loaded square micro strip patch antennas. The resonant mechanisms are clearly mentioned using the simulation and experimental studies. The bandwidth of the polygonal slotted broadband patch antenna is again enhanced by implementing an Lstrip feed mechanism. In the second major part of the thesis, a novel gain enhancement technique for single band and broadband square micro strip patch antennas is achieved by implementing offset stacked configurations.

Análisis interdisciplinar de las redes móviles e Internet en Europa

Internet fue sólo el principio de los grandes cambios. Desde la invención de la imprenta no ha habido un cambio tecnológico con tantas repercusiones como el de la era de la digitalización. Más aún, con la aparición de los primeros terminales móviles que confirmaron la nueva revolución en esta etapa. Este proyecto se centra en el caso europeo. Para ello, se realiza un análisis que, en primer lugar, abordará el tema económico, en el que se explicarán los factores que han influido positiva y negativamente, tales como: el capitalismo, la globalización, la crisis financiera... Después, se expondrá la cuestión política, haciendo referencia al marco legal europeo, los proyectos y las relaciones internacionales. Otros de los aspectos a tratar (y no menos importantes) serán los relacionados con el desarrollo cultural, el movimiento social y los impactos medioambientales. Finalmente se expondrán los distintos tipos de tecnología a los que han dado lugar estos cambios, y cómo han ido evolucionando a lo largo del tiempo, hasta la aparición de nuevas formas de comunicación. Una vez estudiadas las distintas disciplinas, se podrá “diseñar” una posible perspectiva hacia la que se dirigen las redes móviles e Internet en Europa. En definitiva, conocer de dónde venimos, qué es lo que hacemos y hacia dónde nos dirigimos. Internet was only the beginning of great changes. Since the invention of the printing press there has been such an important technological change as the age of digitization. Moreover, with the appearance of the first mobile terminal which confirmed the new revolution at this stage. This project concentrates on the European case. To do this, an analysis is performed that, in the first place board the economic issue, which will explain the factors that have influenced positively and negatively, such as capitalism, globalization, financial crisis... Then the political question will be discussed, referring to the European legal framework, projects and international relations. Other aspects to be treated (and no less important) are those related to the cultural, social movement and environmental impacts. Finally we will present the different types of technology to which these changes have led, and how they have evolved through time, until the emergence of new forms of communication. After studying the different disciplines, you can "design" a possible perspective towards that target mobile networks and Internet in Europe. In short, knowing where we came from, what we do and where we are going.

Advanced handover procedure for cellular communication systems

Third Generation cellular communication systems are expected to support mixed cell architecture in which picocells, microcells and macrocells are used to achieve full coverage and increase the spectral capacity. Supporting higher numbers of mobile terminals and the use of smaller cells will result in an increase in the number of handovers, and consequently an increase in the time delays required to perform these handovers. Higher time delays will generate call interruptions and forced terminations, particularly for time sensitive applications like real-time multimedia and data services. Currently in the Global System for Mobile communications (GSM), the handover procedure is initiated and performed by the fixed part of the Public Land Mobile Network (PLMN). The mobile terminal is only capable of detecting candidate base stations suitable for the handover; it is the role of the network to interrogate a candidate base station for a free channel. Handover signalling is exchanged via the fixed network and the time delay required to perform the handover is greatly affected by the levels of teletraffic handled by the network. In this thesis, a new handover strategy is developed to reduce the total time delay for handovers in a microcellular system. The handover signalling is diverted from the fixed network to the air interface to prevent extra delays due to teletraffic congestion, and to allow the mobile terminal to exchange signalling directly with the candidate base station. The new strategy utilises Packet Reservation Multiple Access (PRMA) technique as a mechanism to transfer the control of the handover procedure from the fixed network to the mobile terminal. Simulation results are presented to show a dramatic reduction in the handover delay as compared to those obtained using fixed channel allocation and dynamic channel allocation schemes.

Practical network coding for two way relay channels in LTE networks

In this paper, the implementation aspects and constraints of the simplest network coding (NC) schemes for a two-way relay channel (TWRC) composed of a user equipment (mobile terminal), an LTE relay station (RS) and an LTE base station (eNB) are considered in order to assess the usefulness of the NC in more realistic scenarios. The information exchange rate gain (IERG), the energy reduction gain (ERG) and the resource utilization gain (RUG) of the NC schemes with and without subcarrier division duplexing (SDD) are obtained by computer simulations. The usefulness of the NC schemes are evaluated for varying traffic load levels, the geographical distances between the nodes, the RS transmit powers, and the maximum numbers of retransmissions. Simulation results show that the NC schemes with and without SDD, have the throughput gains 0.5% and 25%, the ERGs 7 - 12% and 16 - 25%, and the RUGs 0.5 - 3.2%, respectively. It is found that the NC can provide performance gains also for the users at the cell edge. Furthermore, the ERGs of the NC increase with the transmit power of the relay while the ERGs of the NC remain the same even when the maximum number of retransmissions is reduced.

User Effects on Wearable Conformal SCMR System

The performance of a compact, wearable Conformal Strongly Coupled Magnetic Resonance (CSCMR) system is studied when the antenna is in the air and is worn on a user’s arm. The wireless powering system consists of the receiver and load elements designed on a printed circuit board that is attached to a polyester fabric band. The wearable antenna achieves high efficiency, has a small volume, and can be easily printed on substrates. Although the user effect on mobile terminal antennas has been studied in detail, absorption losses in wearable antennas have not been widely investigated. Our results show that efficiency of the antenna in free space is 70% and on a user’s arm is 50%. Human tissue in the close proximity of our wearable Conformal SCMR caused a decrease in radiated efficiency and total efficiency. This undesired degradation in antenna efficiency might be attributed to body loss and absorption losses. Our findings can be used as a reference for future studies on wearable devices and their applications, such as health and sports monitoring.

Investigations on the Radiation Characteristics of Broadband Strip Loaded Slotted Microstrip Antennas

With the recent progress and rapid increase in mobile terminals, the design of antennas for small mobile terminals is acquiring great importance. In view of this situation, several design concepts are already been addressed by the scientists and engineers. Compactness and efficiency are the major criteria for mobile terminal antennas. The challenging task of the microwave scientists and engineers is to device compact printed radiating systems having broadband behavior, together with good efficiency. Printed antenna technology has received popularity among antenna scientists after the introduction of microstrip antenna in 1970s. The successors in this kind such as printed monopoles and planar inverted F are also equally important. Scientists and Engineers are trying to explore this technology as a viable coast effective solution for forthcoming microwave revolution. The transmission line perspectives of antennas are very interesting. The concept behind any electromagnetic radiator is simple. Any electromagnetic system with a discontinuity is radiating electromagnetic energy. The size, shape and the orientation of the discontinuities controls the radiation characteristics of the system such as radiation pattern, gain, polarization etc. It can be either resonant or non resonant structure.

Arquitetura de rede com suporte à mobilidade de fluxo IP e ao gerenciamento de Mobilidade Distribuído (DMM)

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2016.