994 resultados para Mobile mapping
Resumo:
Relatório de Estágio apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Gestão do Território, especialização em Detecção Remota e Sistemas de Informação Geográfica
Resumo:
This paper presents the prototype of a low-cost terrestrial mobile mapping system (MMS) composed of a van, two digital video cameras, two GPS receivers, a notebook computer, and a sound frame synchronisation system. The imaging sensors are mounted as a stereo video camera on top of the vehicle together with the GPS antennae. The GPS receivers and the notebook computer are configured to record data referred to the vehicle position at a planned time interval. This position is subsequently transferred to the road images. This set of equipment and methods provide the opportunity to merge distinct techniques to make topographic maps and also to build georeferenced road image databases. Both vector maps and raster image databases, when integrated appropriately, can give spatial researchers and engineers a new technique whose application may realise better planning and analysis related to the road environment. The experimental results proved that the MMS developed at the São Paulo State University is an effective approach to inspecting road pavements, to map road marks and traffic signs, electric power poles, telephone booths, drain pipes, and many other applications important to people's safety and welfare. A small number of wad images have already been captured by the prototype as a consequence of its application in distinct projects. An efficient organisation of those images and the prompt access to them justify the need for building a georeferenced image database. By expanding it, both at the hardware and software levels, it is possible for engineers to analyse the entire road environment on their office computers.
Resumo:
In this article, the authors examine the current status of different elements that integrate the landscape of the municipality of Olias del Rey in Toledo (Spain). A methodology for the study of rural roads, activity farming and local hunting management. We used Geographic Information Technologies (GIT) in order to optimize spatial information including the design of a Geographic Information System (GIS). In the acquisition of field data we have used vehicle "mobile mapping" instrumentation equipped with GNSS, LiDAR, digital cameras and odometer. The main objective is the integration of geoinformation and geovisualization of the information to provide a fundamental tool for rural planning and management.
Resumo:
El proyecto trata de realizar una comparativa de dos metodologías mediante la realización de un inventario, una metodología clásica como es la metodología GNSS y la metodología Mobile Mapping. El inventario se realiza en tres escenarios distintos, un escenario es una zona verde, una zona urbana y una zona interurbana. La zona verde es el Parque Central de Tres Cantos, la zona urbano es una zona de viviendas unifamiliares deTres Cantos y la zona interurbana es tramo de la carretera M-618 que une los municipios de Colmenar Viejo y Hoyo de manzanares. Para la metodología GNSS se ha utilizado un receptor GRS-1 y para la metodología Mobile Mapping se ha utilizado el sistema IP-S2 Compact+. Con la realización de este inventario se pretende poder comparar los posibles casos que hay en tres escenarios distintos, estudiando los tiempos que se tarda en realizar un inventario con cada metodología, así como los costes que suponen. Los datos obtenidos por cada equipo se exportan en fichero Shapfile para poder abrirlos en ArcGIS y así poder realizar la comparativa. Para finalizar el proyecto y con los conocimientos adquiridos en esta materia se obtienen una conclusiones referidas al trabajo realizado con cada equipo.
Resumo:
Nella tesi si espone il Mobile Mapping System, cioè il rilevamento di dati geospaziali utilizzando sensori montati a bordo di appositi veicolo senza l'ausilio di punti di contatto a terra. Si illustrano i diversi dispositivi del sistema installati a bordo, le loro diverse applicazioni e metodologie di rilevamento. Si trattano le varie problematiche sorte e le loro risoluzioni.
Resumo:
Accurate three-dimensional representations of cultural heritage sites are highly valuable for scientific study, conservation, and educational purposes. In addition to their use for archival purposes, 3D models enable efficient and precise measurement of relevant natural and architectural features. Many cultural heritage sites are large and complex, consisting of multiple structures spatially distributed over tens of thousands of square metres. The process of effectively digitising such geometrically complex locations requires measurements to be acquired from a variety of viewpoints. While several technologies exist for capturing the 3D structure of objects and environments, none are ideally suited to complex, large-scale sites, mainly due to their limited coverage or acquisition efficiency. We explore the use of a recently developed handheld mobile mapping system called Zebedee in cultural heritage applications. The Zebedee system is capable of efficiently mapping an environment in three dimensions by continually acquiring data as an operator holding the device traverses through the site. The system was deployed at the former Peel Island Lazaret, a culturally significant site in Queensland, Australia, consisting of dozens of buildings of various sizes spread across an area of approximately 400 × 250 m. With the Zebedee system, the site was scanned in half a day, and a detailed 3D point cloud model (with over 520 million points) was generated from the 3.6 hours of acquired data in 2.6 hours. We present results demonstrating that Zebedee was able to accurately capture both site context and building detail comparable in accuracy to manual measurement techniques, and at a greatly increased level of efficiency and scope. The scan allowed us to record derelict buildings that previously could not be measured because of the scale and complexity of the site. The resulting 3D model captures both interior and exterior features of buildings, including structure, materials, and the contents of rooms.
Resumo:
Information technologies (ITs), and sports resources and services aid the potential to transform governmental organizations, and play an important role in contributing to sustainable communities development, respectively. Spatial data is a crucial source to support sports planning and management. Low-cost mobile geospatial tools bring productive and accurate data collection, and their use combining a handy and customized graphical user interface (GUI) (forms, mapping, media support) is still in an early stage. Recognizing the benefits — efficiency, effectiveness, proximity to citizens — that Mozambican Minister of Youth and Sports (MJD) can achieve with information resulted from the employment of a low-cost data collection platform, this project presents the development of a mobile mapping application (app) — m-SportGIS — under Open Source (OS) technologies and a customized evolutionary software methodology. The app development embraced the combination of mobile web technologies and Application Programming Interfaces (APIs) (e.g. Sencha Touch (ST), Apache Cordova, OpenLayers) to deploy a native-to-the-device (Android operating system) product, taking advantage of device’s capabilities (e.g. File system, Geolocation, Camera). In addition to an integrated Web Map Service (WMS), was created a local and customized Tile Map Service (TMS) to serve up cached data, regarding the IT infrastructures limitations in several Mozambican regions. m-SportGIS is currently being exploited by Mozambican Government staff to inventory all kind of sports facilities, which resulted and stored data feeds a WebGIS platform to manage Mozambican sports resources.
Resumo:
In general, a land-based mobile mapping system is featured by a vehicle with a pair of video cameras mounted on the top and positioning and navigation sensors loaded in the vehicle. Considering the pair of video cameras mounted on the roof of the vehicle as a stereo camera pointing forward with both optical axes parallel to each other and orthogonal to the stereo base, whose length is 0.94 m, this paper aims at analyzing the interior and exterior camera orientation and the object point coordinates estimated by phototriangulation when the length constraint related to the stereo base is considered or not. The results show that the stereo base constraint has effect ouver the convergence estimation, but does it neither improves the object point coordinate estimation at significance level of 5% and nor it influences the interior orientation parameters. Finally, it has been noticed that the optical axes are not truly parallel to each other and orthogonal to the stereo base. Additionally, it has been observed that there is a convergence of approximately 0.5 degrees in the optical axes and they are not in the same plane (approximately 0.8 degrees deviation).
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Ciências Cartográficas - FCT
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Ciências Cartográficas - FCT