固氮酶钼铁蛋白金属原子簇的拆卸与组装的研究

将棕色固氮菌(Azotobacter vinelandii)固氮酶钼铁蛋白与邻菲罗啉和O2或邻非罗啉和尿素保温并经Sephadex G-25柱层析，可分别得到部分或高度缺失P—cluster和FcMoco的“不全蛋白”。其中，部分缺失金属原子簇的蛋白与含V、Mn、Cr的重组液重组后，所得相应的重组蛋白的底物还原活性及吸收光谱和圆二色(CD))谱虽均得到明显恢复，但与还原钼铁蛋白[MoFe (R)]相比又不尽相同：与含V重组液重组的蛋白的底物还原特性与VFe蛋白相似，波谱特性与MoFe (R)有所不同;分别与含Mn和Cr重组液重组的蛋白的底物还原特性与MoFe(R)相似，而波谱特性却与MoFe(R)有较大差异。高度缺失金属原子簇的蛋白分别与含Mo、Mn、Cr重组液重组后，所得相应的重组蛋白的乙炔还原活性虽都有明显的恢复，但与MoFe(R)相比仍相差较大;当与含钼重组液重组后，它的吸收光谱、可见CD谱及天然电泳图谱均可得到明显恢复，而紫外CD谱却与其乙炔还原活性一样，只能得到部分恢复。 根据上述实验结果，我们提出：(1)钼铁蛋白的金属原子簇与其构象密切相关;(2)部分或高度缺失金属原子簇的蛋白与重组液重组的机理——“零件组装”的基本内容;(3)钼原子在FeMoco中的可被取代性及不处于中心位置;(4)还原M oFe蛋白中Fe原子的价态不尽相同。

固氮酶金属原子簇对其结构和功能的影响

一、 △nifZ MoFe蛋白的纯化、特性及晶体生长 从缺失nifZ的棕色因氮菌突变种DJ194中，经离子交换层析和凝胶过滤提纯得到△nifZ MoFe蛋白，其纯度可达SDS凝胶电泳纯。它的Fe、Mo含量分别为野生型OP MoFe蛋白的56.6%和75.0%左右;C_2H_2、H~+还原活性和△H_2均只有OP MoFe蛋白的14.6%、21.7%和21.7%;其可见吸收光谱、CD及AR谱都与OP MoFe蛋白有较大差异，其中，可以反应P-cluster氧还状态和含量的ε_(450nm)、ε_(700nm)及△ε_(450nm)均要比OP MoFe蛋白低;由紫外CD谱反映的△nifZ MoFe蛋白的构象也与OP MoFe蛋白有所不同。由此我们推测，nifZ可能与固氮酶MoFe蛋白中P-cluster的合成或组装有关。为进一步阐明△nifZ MoFe蛋白的结构和功能特性，我们对△nifZ MoFe蛋白的晶体生长进行了研究，通过对沉淀剂浓度、缓冲体系和pH、蛋白浓度以及温度等条件的不断优化组合，目前我们已获得棕色短斜四棱柱形△nifZ MoFe蛋白的最大晶体为0.15 * 0.09mm。 二、 MoFe(C,O)与含Mo、Mn和Cr重组液重组的比较研究 MoFe(R)经O_2和o-phen共同处理后，成为部分缺失FeMoco和P-cluster的不全蛋白(MoFe(C,O))，其C_2H_2还原活性降至MoFe(R)的40%左右，将其分别与含Mo、Cr和Mn的重组液进行保温重组，其C_2H_2还原活性及光谱学特征都得到明显恢复。通过对不同重组液及与MoFe(C,O)形成的重组蛋白的比较，我们认为：1)MoFe(R)中的Fe和Mo原子可能是逐步被鳌合除去的，且不同蛋白中的Fe和Mo原子的缺失程度不同，因而MoFe(C,O)会以多种状态存在;2)在重组液配制过程中，发生的一系列颜色变化及沉淀反应与其是否具有重组激活能力具有相关性，重组液中可能已合成一些简单的含M(M=Mo或Cr或Mn或V)的铁硫化物，但不可能形成完整的金属原子簇;3)含M(M=Mo或Cr或Mn)的重组液均能使MoFe(C,O)中遭到破坏的FeMoco和P-cluster及其连接部分得以重新组装和修复，进而恢复其底物还原活性和光谱学特征。 三、 含锰固氮酶的初步探索 棕色固氮菌突变种UW_3(nifH~-)不能在含钼的培养中固氮生长，但能在含MnSO_4的无氮培养基中固氮生长。用含MnSO_4的无钼无氮培养基培养该突变种从中纯化得到的固氮酶组分1蛋白，其C_2H_2及H~+还原活性约相当于MoFe(R)的20%左右，Mn元素含量测定表明，其中已经含有Mn元素，Fe/Mn比值比OP MoFe蛋白中的Fe/Mo低。这些结果表明：UW_3突变种在该种条件下可能已表达了不同于已发现的三种固氮酶的新的固氮酶组分1蛋白，并且其中含有Mn元素。

Confirmatory factor analysis of the Way of Coping Checklist-Revised (WCCL-R) in the Asian context

Industrial employment growth has been one of the most dynamic areas of expansion in Asia; however, current trends in industrialised working environments have resulted in greater employee stress. Despite research showing that cultural values affect the way people cope with stress, there is a dearth of psychometrically established tools for use in non-Western countries to measure these constructs. Studies of the "Way of Coping Checklist-Revised" (WCCL-R) in the West suggest that the WCCL-R has good psychometric properties, but its applicability in the East is still understudied. A confirmatory factor analysis (CFA) is used to validate the WCCL-R constructs in an Asian population. This study used 1,314 participants from Indonesia, Sri Lanka, Singapore, and Thailand. An initial exploratory factor analysis revealed that original structures were not confirmed; however, a subsequent EFA and CFA showed that a 38-item, five-factor structure model was confirmed. The revised WCCL-R in the Asian sample was also found to have good reliability and sound construct and concurrent validity. The 38-item structure of the WCCL-R has considerable potential in future occupational stress-related research in Asian countries.

Curvilinear relationships between the job demands-resources (JD-R) model, and work engagement : a police service case study

The current study aims to investigate the non-linear relationship between the JD-R model and work engagement. Previous research has identified linear relationships between these constructs; however there are strong theoretical arguments for testing curvilinear relationships (e.g., Warr, 1987). Data were collected via a self-report online survey from officers of one Australian police service (N = 2,626). Results demonstrated a curvilinear relationship between job demands and job resources and engagement. Gender (as a control variable) was also found to be a significant predictor of work engagement. The results indicated that male police officers experienced significantly higher job demands and colleague support than female officers. However, female police officers reported significantly higher levels of work engagement than male officers. This study emphasises the need to test curvilinear relationships, as well as simple linear associations, when measuring psychological health.

Innovation adoption and fit, linking R&D and industry

Significant sums of money are invested in developing technological innovations that have low levels and rates of adoption. Several approaches have been put forward in an effort to improve rates of adoption. This paper presents the results of study that examined the innovation fit of key technological innovations in the beef industry. Findings indicate that be assessing the innovation fit throughout the R&D process researchers and end users can collaborate to improve the innovation fit and the rate of adoption. The paper also put forward a model that demonstrates the linkages between R&D, adoption and innovation fit.

Railways, Urban Development and Town Planning in Britain: 1948–2008, Haywood R. Ashgate (2009). £65.00, ISBN: 9780754673927

This book is a thorough investigation of the relationship between land use planning and the railways in Britain, through review of the factors affecting the two sectors and their integration during the period of public ownership. The rationale behind the book is explained as a timely analysis of the dynamic correlation involving town planning and management of the railway in a period when growing congestion on the road network is forcing people to look for alternative modes and capacity is badly needed to accommodate this increased demand for travel. The book calls for a modal shift from road to rail for passenger and freight traffic.

Crystallographic characterization of the first reported crystalline form of the potent hallucinogen (R)-2-amino-1-(8-bromobenzo[1,2-b;5,4-b']difuran-4-yl)propane or `bromodragonfly': the 1:1 anhydrous proton-transfer compound with 3,5-dinitrosalicylic acid

The 1:1 proton-transfer compound of the potent substituted amphetamine hallucinogen (R)-1-(8-bromobenzo[1,2-b; 4,5-b']difuran-4-yl)-2-aminopropane (common trivial name 'bromodragonfly') with 3,5-dinitrosalicylic acid, 1-(8-bromobenzo[1,2-b;4,5-b']difuran-4-yl)-2-mmoniopropane 2-carboxy-4,6-dinitrophenolate, C13H13BrNO2+ C7H3N2O7- forms hydrogen-bonded cation-anion chain substructures comprising undulating head-to-tail anion chains formed through C(8) carboxyl O-H...O(nitro) associations and incorporating the aminium groups of the cations. The intra-chain cation-anion hydrogen-bonding associations feature proximal cyclic R33(8) interactions involving both a N+-H...O(phenolate) and the carboxyl O--H...O(nitro)associations. Also present are aromatic pi-pi ring interactions [minimum ring centroid separation, 3.566(2)A; inter-plane dihedral angle, 5.13(1)deg]. A lateral hydrogen-bonding interaction between the third aminium proton and a carboxyl O acceptor link the chain substructures giving a two-dimensional sheet structure. This determination represents the first of any form of this compound and confirms that it has the (R) absolute configuration. The atypical crystal stability is attributed both to the hydrogen-bonded chain substructures provided by the anions, which accommodate the aminium proton-donor groups of the cations and give cross-linking, and to the presence of cation--anion aromatic ring pi-pi interactions.

Encyclopedia contributions: entries N-R in Oxford Companion to Australian

New Farm Park; p.436 Oakman, H.O. (with Jan Seto); p.449 Paranella, Jose; p.463 Perrott family; p.469 Pink, James; p.475 Queensland; pp.495-497 The Queenslander; pp.497-498 The Queensland Horticulturist; p.498 Rawson, Mina; p.502 Rockhampton Botanic Gardens; p.572

A regional construction R&D evaluation system for China

Expenditure on R&D in the China construction industry has been relatively low in comparison with many developed countries for a number of years – a situation considered to be a major barrier to the industry’s competitiveness in general and unsatisfactory industry development of the 31 regions involved. A major problem with this is the lack of a sufficiently sophisticated method of objectively evaluating R&D activity in what are quite complex circumstances considering the size and regional differences that exist in this part of the world. A regional construction R&D evaluation system (RCRES) is presented aimed at rectifying the situation. This is based on 12 indicators drawn from the Chinese Government’s R&D Inventory of Resources in consultation with a small group of experts in the field, and further factor analysed into three groups. From this, the required evaluation is obtained by a simple formula. Examination of the results provides a ranking list of the R&D performance of each of the 31 regions, indicating a general disproportion between coastal and inland regions and highlighting regions receiving special emphasis or currently lacking in development. The understanding on this is vital for the future of China’s construction industry.

The social media (r)evolution : Obama's political campaign

This paper addresses how social media was used to leverage votes in new media environments. Barack Obama’s social media campaign is analysed and illustrates how the Obama brand benefited from integrating social media into the campaign. Voting behaviour has changed; politicians are continually seeking new ways to communicate with their constituents. Voting on political ‘brands’ is based on an identity or image, rather than central issues. While political parties rely upon an integrated marketing communication (IMC) approach, with a focus on building the (political) brand of the party and brand relationships, communication is no longer fully controlled by the marketers.

Leveraging R&D investment for the Australian built environment

This paper discusses a current research project building new understandings and knowledge relevant to R&D funding strategies in Australia. Building on a retrospective analysis of R&D trends and industry outcomes, an industry roadmap will be developed to inform R&D policies more attuned to future industry needs to improve research investment effectiveness. The project will also include analysis of research team formation and management (involving end users from public and private sectors together with research and knowledge institutions), and dissemination of outcomes and uptake in the Australian building and construction industry. The project will build on previous research extending open innovation system theory and network analysis and procurement, focused on R&D. Through the application of dynamic capabilities and strategic foresighting theory, an industry roadmap for future research investment will be developed, providing a stronger foundation for more targeted policy recommendations. This research will contribute to more effective construction processes in the future through more targeted research funding and more effective research partnerships between industry and researchers.

Leveraging R&D to advance digital modelling practice in Australian construction

This paper describes a lead project currently underway through Australia’s Sustainable Built Environment National Research Centre, evaluating impacts, diffusion mechanisms and uptake of R&D in the Australian building and construction industry. Building on a retrospective analysis of R&D trends and industry outcomes, a future-focused industry roadmap will be developed to inform R&D policies more attuned to future industry needs to improve investment effectiveness. In particular, this research will evaluate national R&D efforts to develop, test and implement advanced digital modelling technologies into the design/construction/asset management cycle. This research will build new understandings and knowledge relevant to R&D funding strategies, research team formation and management (with involvement from public and private sectors, and research and knowledge institutions), dissemination of outcomes and uptake. This is critical due to the disaggregated nature of the industry, intense competition, limited R&D investment; and new challenges (e.g. digital modelling, integrated project delivery, and the demand for packaged services). The evaluation of leading Australian and international efforts to integrate advanced digital modelling technologies into the design/construction/asset management cycle will be undertaken as one of three case studies. Employing the recently released Australian Guidelines for Digital Modelling developed with buildingSMART (International Alliance for Interoperability) and the Australian Institute of Architects, technical and business benefits across the supply chain will be highlighted as drivers for more integrated R&D efforts.