Deproteinized bovine bone mineral in marginal defects at implants installed immediately into extraction sockets: an experimental study in dogs

Aim: To evaluate the influence of deproteinized bovine bone mineral (DBBM) particles concomitant with the placement of a collagen membrane on alveolar ridge preservation and on osseointegration of implants placed into alveolar sockets immediately after tooth extraction. Material and methods: The pulp tissue of the mesial roots of 3P3 was removed in six Labrador dogs and the root canals were filled. Flaps were elevated in the right side of the mandible, and the buccal and lingual alveolar bony plates were exposed. The third premolar was hemi-sectioned and the distal root was removed. A recipient site was prepared and an implant was placed lingually. After implant installation, defects of about 0.6mm wide and 3.1mm depth resulted at the buccal aspects of the implant, both at the test and at the control sites. The same surgical procedures and measurements were performed on the left side of the mandible. However, DBBM particles with a size of 0.25-1mm were placed into the remaining defect concomitant with the placement of a collagen membrane. Results: All implants were integrated into mature bone. No residual DBBM particles were detected at the test sites after 4 months of healing. Both the test and the control sites showed buccal alveolar bone resorption, 1.8 +/- 1.1 and 2.1 +/- 1mm, respectively. The most coronal bone-to-implant contact at the buccal aspect was 2 +/- 1.1 an 2.8 +/- 1.3mm, at the test and the control sites, respectively. This difference in the distance was statistically significant. Conclusion: The application of DBBM concomitant with a collagen membrane to fill the marginal defects around implants placed into the alveolus immediately after tooth extraction contributed to improved bone regeneration in the defects. However, with regard to buccal bony crest preservation, a limited contribution of DBBM particles was achieved.

Programa de apoio à legalização mineral de olarias da região de Rio Claro (SP)

Esse artigo apresenta os resultados de um projeto denominado de Projeto Parceria, desenvolvido no período de 2007 a 2010, com objetivo de orientar, tecnicamente, os oleiros associados da ASCER, para a correta condução das atividades de extração de matéria-prima das jazidas utilizadas pela indústria oleira. As atividades desenvolvidas, nesse projeto, contemplam a legalização da situação minerária das atuais áreas de extração, orientação em relação à recuperação das áreas degradadas pela mineração e caracterização cerâmica dos materiais argilosos utilizados na produção de tijolos. Fizeram parte desse estudo quatorze Olarias situadas na região de Rio Claro (SP). A legalização das atividades de extração mineral, na área da jazida de cada olaria, conduziu, automaticamente, à legalização ambiental, que está sendo atualmente executada. Duas olarias não puderam regularizar as suas extrações, pois as áreas de suas propriedades estavam oneradas no DNPM. Outras duas olarias não possuíam documentações referentes à parte jurídica das empresas, necessárias para legalização de suas áreas. Os materiais argilosos utilizados pelos oleiros foram caracterizados quanto às suas aplicações cerâmicas como material nobre para a fabricação de telhas e tijolos, gerando produtos de alta qualidade.

Bone regeneration at implants placed into extraction sockets of maxillary incisors in dogs

AimTo compare the influence of autologous or deproteinized bovine bone mineral as grafting material on healing of buccal dehiscence defects at implants installed immediately into the maxillary second incisor extraction socket in dogs.Material and methodsIn the maxillary second incisor sockets of 12 Labrador dogs, implants were installed immediately following tooth extraction. A standardized buccal defect was created and autologous bone particles or deproteinized bovine bone mineral were used to fill the defects. A collagen membrane was placed to cover the graft material, and the flaps were sutured to fully submerge the experimental areas. Six animals were sacrificed after 2 months, and six after 4 months of healing. Ground sections were obtained for histological evaluation.ResultsAfter 2 months of healing, all implants were osseointegrated. All buccal dehiscence defects were completely filled after 2 months irrespective of the augmentation material (autologous bone or Bio-Oss (R)) applied. Bone-to-implant contact (BIC) on the denuded implant surfaces was within a normal range of 30-40%. However, the newly formed tissue at 2 months was partially resorbed (> 50% of the area measurements) after 4 months.ConclusionsApplying either autologous bone or deproteinized bovine bone mineral to dehiscences at implants installed immediately into extraction sockets resulted in high degree of regeneration of the defects with satisfactory BIC on the denuded implant surface.To cite this article:De Santis E, Botticelli D, Pantani F, Pereira FP, Beolchini M, Lang NP. Bone regeneration at implants placed into extraction sockets of maxillary incisors in dogs.Clin. Oral Impl. Res. 22, 2011; 430-437.

Alveolar bony crest preservation at implants installed immediately after tooth extraction: An experimental study in the dog

Aim: To evaluate the influence of deproteinized bovine bone mineral in conjunction with a collagen membrane, at implants installed into sockets in a lingual position immediately after tooth extraction, and presenting initial horizontal residual buccal defects <2 mm. Material and methods: The pulp tissue of the mesial roots of 4P4 was removed in six Labrador dogs, and the root canals were filled with gutta-percha and cement. Flaps were elevated, and the buccal and lingual alveolar bony plates were exposed. The premolars were hemi-sectioned, and the distal roots were removed. Implants were installed in a lingual position and with the margin flush with the buccal bony crest. After installation, defects resulted at about 1.7 mm in width at the buccal aspects, both at the test and control sites. Only in the left site (test), deproteinized bovine bone mineral (DBBM) particles were placed into the defect concomitantly with the placement of a collagen membrane. A non-submerged healing was allowed. Results: After 3 months of healing, one implant was found not integrated and was excluded from the analysis together with the contralateral control implant. All remaining implants were integrated into mature bone. The bony crest was located at the same level of the implant shoulder, both at the test and control sites. At the buccal aspect, the most coronal bone-to-implant contact was located at a similar distance from the implant margin at the test (1.7 ± 1.0 mm) and control (1.6 ± 0.8 mm) sites, respectively. Only small residual DBBM particles were found at the test sites. Conclusion: The placement of an implant in a lingual position into a socket immediately after tooth extraction may favor a low exposure of the buccal implant surface. The use of DBBM particles, concomitantly with a collagen membrane, did not additionally improve the outcome obtained at the control sites. © 2011 John Wiley & Sons A/S.

Ridge preservation at implants installed immediately after molar extraction. An experimental study in the dog

Aim: To evaluate the influence of deproteinized bovine bone mineral (DBBM), in conjunction with a collagen membrane, on bone resorption at implants installed in a lingual position immediately into extraction sockets with horizontal residual buccal defects >2.0 mm. Material & methods: The pulp tissue of the mesial roots of 1M1 was removed in six Labrador dogs, and the root canals were filled with gutta-percha and cement. Flaps were elevated. The molars were hemi-sectioned and the distal roots removed. Implants were installed in a lingual position and with the shoulder flush with the buccal bony crest. After installation, defects of about 2.5 and 2.7 mm in width resulted at the buccal aspects of the test and control sites, respectively. Only in the left site (test), deproteinized bovine bone mineral (DBBM) particles were placed into the defect concomitantly with the placement of a collagen membrane. On the control sites, no biomaterials were applied. A non-submerged healing was allowed. Results: After 3 months of healing, one control implant was not integrated and was excluded from the analysis, together with the contralateral test implant. All remaining implants were integrated into mature bone. The buccal alveolar bony crest was resorbed more at the test compared with the control sites, 2.2 ± 0.9 mm and 1.5 ± 1.3 mm, respectively. The vertical resorption of the lingual plate was 1.6 ± 1.5 mm and 1.5 ± 1.1 mm at the test and control sites, respectively. Only small residual DBBM particles were found at the test sites (1.4%). Conclusion: The use of DBBM particles to fill buccal defects of ≥2.5 mm at implants installed immediately into alveolar extraction sockets did not preserve the buccal bony wall. © 2012 John Wiley & Sons A/S.

Regiões do entorno dos projetos de extração e transformação mineral na Amazônia oriental

Tentativas estratégicas de modernização para a Amazônia Oriental brasileira recorreram com freqüência à indução da concentração espacial de grandes volumes de capitais, e delas resultou o surgimento de grandes plantas mínero-metalúrgicas na região. Face ao que, o artigo analisa as principais mudanças ocorridas nos municípios situados no entorno dos projetos de extração e transformação mineral e indicando que, contrariamente às predições governamentais, há limitada capacidade destas atividades dinamizarem este entorno.

A digital evaluation of alveolar ridge preservation at implants placed immediately into extraction sockets: an experimental study in the dog

Objective: To compare with pristine sites bone resorption and soft tissue adaptation at implants placed immediately into extraction sockets (IPIES) in conjunction with deproteinized bovine bone mineral (DBBM) particles and a collagen membrane.Material and methods: The mesial root of the third premolar in the left side of the mandible was endodontically treated (Test). Flaps were elevated, the tooth hemi-sectioned, and the distal root removed to allow the immediate installation of an implant into the extraction socket in a lingual position. DBBM particles were placed into the defect and on the outer contour of the buccal bony ridge, concomitantly with the placement of a collagen membrane. A non-submerged healing was allowed. The premolar on the right side of the mandible was left in situ (control). Ground sections from the center of the implant as well as from the center of the distal root of the third premolar of the opposite side of the mandible were obtained. The histological image from the implant site was superimposed to that of the contralateral pristine distal alveolus, and dimensional variation evaluated for the hard tissue and the alveolar ridge.Results: After 3 months of healing, both histological and photographic evaluation revealed a reduction of hard and soft tissue dimensions.Conclusion: The contour augmentation performed with DBBM particles and a collagen membrane at the buccal aspects of implants placed IPIES was not able to maintain the tissue volume.

A social licence to operate: Corporate social responsibility, local communities and the constitution of global production networks

This article contributes to the theorization of the role of informal regulation (undertaken by leading firms) in the ongoing organization of global production networks. It does so through a qualitative case study of BHP Billiton's Ravensthorpe Nickel Operation (RNO) in the rural Shire of Ravensthorpe in Western Australia. This less tangible, and to date under-researched, dimension of global production networks is foregrounded through a focus on the corporate social responsibility strategy implemented by RNO in the service of achieving and/or demonstrating a broader ‘social licence to operate’. This ‘licence’ functions – beyond the corporation – as a legitimated and legitimating multi-scalar mechanism through which to gain and maintain access to mineral resources and thus to establish viable and ongoing global production networks. Further, this informal regulation is shown to shape social relations and qualities of place conducive to competitive global mineral extraction and to facilitate the positioning of local communities and places in mineral global production networks.

Hydrobiological service for observations and control of surface waters in the USSR

Technological progress, having reached in our time an unprecedented speed, is still increasing the rate of mineral extraction, industrial construction, and the mastering of new kinds of energy is growing. Correspondingly the anthropogenic load on the biosphere is increased and that requires the comprehensive development of monitoring the anthropogenic changes in the natural environment. Among problems resulting from the scientific-technological development, a noticeable place is given to the problem of pure water. Surface land waters proved to be a sensitive link in the natural environment. The hydrobiological service for observations and control of the surface waters is one of the subsystems of the State/Federal Service for Observations and Control of pollution levels in environmental objects, conducted by the USSR State Committee for Hydrometeor- ology and Control of the Natural Environment. This paper summarises the the main principles of the organisation and goals of the national system of monitoring of the state of the natural environment in the USSR.

‘Once a miner, always a miner’: Poverty and livelihood diversification in Akwatia, Ghana

This paper offers an alternative viewpoint on why people choose to engage in artisanal mining – the low tech mineral extraction and processing of mainly precious metals and stones – for extended periods in sub-Saharan Africa. Drawing upon experiences from Akwatia, Ghana’s epicentre of diamond production since the mid-1920s, the analysis challenges the commonly-held view that the region’s people are drawn to artisanal mining solely because of a desire ‘to get rich quick’. A combination of events, including the recent closure of Ghana Consolidated Diamonds Ltd’s industrial-scale operation and decreased foreign investment in the country’s diamond industry over concerns of it potentially harbouring ‘conflict’ stones from neighbouring Coˆte D’Ivoire, has had a debilitating economic impact on Akwatia. In an attempt to alleviate their hardships, many of the town’s so-called ‘lifetime’ diamond miners have managed to secure employment in neighbouring artisanal gold mining camps. But their decision has been condemned by many of the country’s policymakers and traditional leaders, who see it solely as a move to secure ‘fast money’. It is argued here, however, that these people pursue work in surrounding artisanal gold mining communities mainly because of poverty, and that their decision has more to do with a desire to immerse in activities with which they are familiar, that offer stable employment and consistent salaries, and provide immediate debt relief. Misdiagnosis of cases such as Akwatia underscores how unfamiliar policymakers and donors are with the dynamics of ASM in sub-Saharan Africa.

'Agricultural poverty' and the expansion of artisanal mining in sub-Saharan Africa: Experiences from southwest Mali and southeast Ghana

Why do people engage in artisanal and small-scale mining (ASM) – labour-intensive mineral extraction and processing activity – across sub-Saharan Africa? This paper argues that ‘agricultural poverty’, or hardship induced by an over-dependency on farming for survival, has fuelled the recent rapid expansion of ASM operations throughout the region. The diminished viability of smallholder farming in an era of globalization and overreliance on rain-fed crop production restricted by seasonality has led hundreds of thousands of rural African families to ‘branch out’ into ASM, a move made to secure supplementary incomes. Experiences from Komana West in Southwest Mali and East Akim District in Southeast Ghana are drawn upon to illustrate how a movement into the ASM economy has impacted farm families, economically, in many rural stretches of sub-Saharan Africa.

Poverty traps in small-scale mining communities: the case of sub-Saharan Africa

This paper critically reflects on why, in many rural stretches of sub-Saharan Africa, scores of people engage in artisanal and small-scale mining (ASM) activity – low-tech, labour intensive mineral extraction – for lengthy periods of time. It argues that a large share of the region’s ASM operators have mounting debts which prevent them from pursuing alternative, less arduous, employment. The paper concludes with an analysis of findings from research carried out by the author in Talensi-Nabdam District, Northern Ghana, which captures the essence of the poverty trap now plaguing so many ASM communities in sub-Saharan Africa.

Royalties minerais e capacidade de gestão em governos locais: um estudo em municípios mineradores de Minas Gerais

O presente estudo tem por objetivo realizar um diagnóstico da capacidade de gestão pública local dos municípios dependentes da atividade de extração mineral em Minas Gerais, a fim de avaliar seu nível de qualificação, identificar limitações ao fortalecimento institucional da gestão e investigar como a gestão municipal tem evoluído a partir do recebimento dos recursos da Compensação Financeira pela Exploração de Recursos Minerais (CFEM). A variável “capacidade de gestão” foi operacionalizada a partir da metodologia “Government Performance Project” (GPP), que propõe cinco dimensões de análise, a saber: gestão financeira, gestão de capital, gestão de pessoas, gestão de tecnologia da informação e gestão por resultados. Busca-se responder às seguintes questões: nas cidades mineiras dependentes economicamente da atividade de extração mineral, o poder público municipal demonstra capacidade de gestão adequada no desempenho de sua função? O recebimento dos recursos extras tem propiciado a melhoria da qualidade de gestão municipal? Para o desenvolvimento do estudo, realizou-se um estudo de casos múltiplos, tendo sido selecionados três municípios mineiros dependentes há vários anos da atividade de extração mineral: Mariana, Catas Altas e São Gonçalo do Rio Abaixo. Foram realizadas entrevistas semiestruturadas com técnicos, secretários municipais, prefeitos e cidadãos, buscando investigar a capacidade de gestão do poder público local nessas cidades. Embora os três municípios apresentem características comuns, como dependência da atividade mineral, proximidade territorial, contexto econômico e níveis de arrecadação elevados, nota-se que tais municípios representam três realidades diferentes, com níveis de desenvolvimento distintos. Foi possível identificar que os municípios estudados, sobretudo Catas Altas e São Gonçalo do Rio Abaixo, adotam boas práticas na gestão municipal. O município de Mariana apresentou recentemente boas iniciativas de mudança na gestão, entretanto, as mudanças políticas têm impedido que estas sejam concretizadas. Além das dimensões de análise do GPP, foi possível identificar outros fatores relevantes para o fortalecimento institucional da gestão, tais como, planejamento, perfil do gestor e contexto político. Verificou-se ainda que os impactos da mineração não se restringem à cidade mineradora, mas também às cidades localizadas no entorno da mina.

Redes interorganizacionais e inovação: o caso do pólo joalheiro de Belém

This work is a case study based on Belém Jewelry Pole, whose main issue is to understand how the social network (which the Pole is inserted) influences on innovation process on this area. The main objective is to analyze how interorganizational networks impacted/impact on the potential for innovation, creating both limits and opportunities for the companies development. The adopted method analyzed the historical jewelry industry trajectory since the beginning of mineral extraction in the city of Itaituba (in the Pará State) until nowadays. Primary and secondary data were used allowing the view of the dynamics of the network during transformation periods of the main involved actors in the process. The prospect of embeddedness structural as analysis technique allowed verifying the quality of interactors ties, as well as the visualization of their structures. During the jewelry industry trajectory was verified a change in the quality of social relations, modifying the information flow, trust and associations of various links in the production chain. Both direct and indirect ties facilitated the access to remote networks entering new information related to new products, processes and market aspects. This interaction has led to raising the innovation potential causing a qualitative and quantitative improvement in competitiveness of organizations. Some embedded ties allowed the formation of partnerships bringing various economic earnings for those involved in the relationship. Thus, it is understood how aspects related to the position, architecture and quality of ties in a wide social network influenced on the innovation process and eventual jewelry industry trajectory