Advanced process of microbiological control of wastewater in combined system of disinfection with UV radiation

The purpose of this study was to present a methodology with superior efficiency for inactivating pathogenic indicators commonly found in domestic sewage. The adopted method was based on synergistic effect resulting from the introduction of a UV radiation pre-disinfection stage of sewage followed by secondary treatment. A pilot unit was installed in the sewage treatment plant of the University of Sao Paulo to simulate the combined system in full-scale operational conditions. Its performance was evaluated through microbiological examinations for determining Escherichia coli, total coliforms and coliphages. The application of UV radiation at 5.1mW/cm(2) for 10 s of exposure in the first disinfection stage was enough to reduce the surviving number of E. coli around 100 times, in comparison to the conventional method. Therefore, based on experimental data, it is possible to conclude that combining treatment and pre-disinfection stage is an effective potential technique to produce effluents with lower degree of contamination by pathogenic organisms.

Microbiological control of moisturizing mask formulation added of hibiscus flowers, assai palm, black mulberry and papaw glycolic extracts

The microbiological control of moisturizing mask formulation added of hibiscus flowers, assai palm, black mulberry and papaw glycolic extracts, determining the number of viable microorganisms and possible presence of pathogenic. The moisturizing mask formulation was composed of zinc oxide (5. 0%) and moisturizing cream constituted of triceteareth-4 phosphate (and) cetyl alcohol (and) stearyl alcohol (and) sodium cetearyl sulfate (and) oleth-10 (qs 50g). To this formulation was added hibiscus flowers glycolic extract (2. 5%), assai palm glycolic extract (1. 5%), black mulberry glycolic extract (1. 5%) and papaw glycolic extract (2. 0%). The formulation was stored in aseptically clean recipients, away from humidity and light, in fresh and airy places. The results of the microbiological analysis on the counting of aerobic mesophilic microorganisms (bacteria and fungi), of the above mentioned formulation, revealed a bioburden < 10 CFU/mL in all samples. Such data indicate adequate microbiological quality of the tested products, according to official recommendations. Furthermore, it was not detected the presence of pathogenic microorganisms, assuring the harmlessness of the formulation. The results lead us to conclude that the formulation and raw materials analyzed did not present microbial contamination, evidenced for estimating the number of viable microorganisms (<10 UFC/g) and for researching pathogens.

Development of guidelines for microbiological control in microbrewery

Over the past 15 years the Italian brewing scene showed interesting changes, especially with regard to the creation of many breweries with an annual production of less than 10,000 hectoliters. The beers produced by microbreweries are very susceptible to attack by spoilage micro-organisms that cause the deterioration of beer quality characteristics. In addition, most of the microbreweries do not practice heat treatments of stabilization and do not carry out quality checks on the product. The high presence of beer spoilage bacteria is an economic problem for the brewing industry because it can damage the brand and it causes high costs of product retrieval. This thesis project was aimed to study the management of the production process in the Italian microbreweries within a production less than 10,000 hl. In particular, the annual production, type of plant, yeast management, process management, cleaning and sanitizing of a representative sample of microbreweries were investigated. Furthermore was made a collection of samples in order to identify, with simple methods, what are spoilage bacteria more present in the Italian craft beers. 21% of the beers analysed were positive at the presence of lactic acid bacteria. These analytical data show the importance of understanding what are the weak points of the production process that cause the development of spoilage bacteria. Finally, the thesis examined the actual production of two microbreweries in order to understand the process management that can promote the growth of spoilage bacteria in beer and production plant. The analysis of the data for the two case studies was helpful to understand what are the critical points where the microorganisms are most frequently in contact with the product. The hygiene practices are crucial to ensure the quality of the finished product, especially in the case of non-pasteurized beer.

Immunological and microbiological activity of Davilla elliptica St. Hill. (Dilleniaceae) against Mycobacterium tuberculosis

Mycobacterium tuberculosis is responsible for over 8 million cases of tuberculosis (TB) annually. Natural products may play important roles in the chemotherapy of TB. The immunological activity of Davilla elliptica chloroform extract (DECE) was evaluated in vitro by the determination of hydrogen peroxide (H2O2), nitric oxide (NO), and tumor necrosis factor-alpha (TNF-alpha) release in peritoneal macrophages cultures. DECE was also tested for its antimycobacterial activity against M. tuberculosis using the microplate alamar blue assay. DECE (50, 150, 250 µg/ml) stimulated the production of H2O2 (from 1,79 ± 0,23 to 7,27 ± 2,54; 15,02 ± 2,86; 20,5 ± 2,1 nmols) (means ± SD), NO (from 2,64 ± 1,02 to 25,59 ± 2,29; 26,68 ± 2,41; 29,45 ± 5,87 µmols) (means ± SD) and TNF-alpha (from 2,44 ± 1,46 to 30,37 ± 8,13; 38,68 ± 1,59; 41,6 ± 0,90 units/ml) (means ± SD) in a dose-dependent manner and also showed a promising antimycobacterial activity with a minimum inhibitory concentration of 62,5 µg/ml. This plant may have therapeutic potential in the immunological and microbiological control of TB.

Immunological and microbiological activity of Davilla elliptica St. Hill. (Dilleniaceae) against Mycobacterium tuberculosis

Mycobacterium tuberculosis is responsible for over 8 million cases of tuberculosis (TB) annually. Natural products may play important roles in the chemotherapy of TB. The immunological activity of Davilla elliptica chloroform extract (DECE) was evaluated in vitro by the determination of hydrogen peroxide (H2O2), nitric oxide (NO), and tumor necrosis factor-alpha (TNF-alpha) release in peritoneal macrophages cultures. DECE was also tested for its antimycobacterial activity against M. tuberculosis using the microplate alamar blue assay. DECE (50, 150, 250 µg/ml) stimulated the production of H2O2 (from 1,79 ± 0,23 to 7,27 ± 2,54; 15,02 ± 2,86; 20,5 ± 2,1 nmols) (means ± SD), NO (from 2,64 ± 1,02 to 25,59 ± 2,29; 26,68 ± 2,41; 29,45 ± 5,87 µmols) (means ± SD) and TNF-alpha (from 2,44 ± 1,46 to 30,37 ± 8,13; 38,68 ± 1,59; 41,6 ± 0,90 units/ml) (means ± SD) in a dose-dependent manner and also showed a promising antimycobacterial activity with a minimum inhibitory concentration of 62,5 µg/ml. This plant may have therapeutic potential in the immunological and microbiological control of TB.

Quality control of cosmetics containing Calendula officinalis, Melampodium divaricatum, Matricaria chamomila linné and Acchilea millefolium extracts

The use of medicinal plants occurs since the Antiquity, but has become more popular in the present time. In the United States, 50% of the population uses the phytotherapy. Calendula officinalis and Melampodium divaricatum have components called flavonoids. Matricaria chamomila Linn and Acchilea millefolium, popularly known as camomila and mil folhas, respectively, have sesquiterpenic components called azulens. These substances present many effects; some of them offer benefits to the human health. Thus, these plants had their extract incorporated in cosmetic-dermatological formulations. This study aimed to prove the presence of the active substances, sesquiterpenes and flavonoids, in cosmetic creams with Matricaria chamomila Linn, Acchilea millefolium, Calendula officinalis and Melampodium divaricatum extracts. Also, aimed to evaluate the microbiological quality of the products. Flavonoids and sesquiterpernes were detected in the emulsions and the microbiological quality was verified. Thus, the products are safe to the users in relation to the microbiological aspects and should present beneficial effects due to the presence of flavonoids and sesquiterpenes.

Hapettavan BIMODES-mikrobientorjuntamenetelmän vaikutukset paperikoneella

The aim of this study was to examine the effects of oxidising BIMODES microbiological control program on three paper machine process. The chemicals used in BIMODES program are sodium hypochlorite (NaOCl) and bromo-chloro-di-methyl-hydantoin (BCDMH). The literary part of this study discusses the microbiological problems in paper making industry, describes functional mechanisms of oxidants and also introduces the BIMODES- program. In the experimental part the aim was to examine the effects of BIMODES in three different paper machines. The purpose was to find out the effects and changes in wet end chemistry, bacterial counts, in the other additives and also in the sheet defects and holes. The study also examines what are the most important measurements to control BIMODES dosing. In addition the optimal dosing level for each machine was tried to find out. It was found that there is a clear correlation between the total chlorine level and bacterial counts. Changes in the BIMODES dosing level can be measured by redox potential, but the correlation is very poor. BIMODES program doesn’t have straight influence to pH values, but if dosage level is too low the bacterial activity can affect degreasing in the pH value. In this study couldn’t find any consequential effects for the other additives by using BIMODES. In addition the optimal dosing levels were found and by following correct halogen levels it is possible to decrease bacterial levels for very low level.

Development of molecular-based techniques for the detection, identification and quantification of food-borne pathogens

La presencia de microorganismos patógenos en alimentos es uno de los problemas esenciales en salud pública, y las enfermedades producidas por los mismos es una de las causas más importantes de enfermedad. Por tanto, la aplicación de controles microbiológicos dentro de los programas de aseguramiento de la calidad es una premisa para minimizar el riesgo de infección de los consumidores. Los métodos microbiológicos clásicos requieren, en general, el uso de pre-enriquecimientos no-selectivos, enriquecimientos selectivos, aislamiento en medios selectivos y la confirmación posterior usando pruebas basadas en la morfología, bioquímica y serología propias de cada uno de los microorganismos objeto de estudio. Por lo tanto, estos métodos son laboriosos, requieren un largo proceso para obtener resultados definitivos y, además, no siempre pueden realizarse. Para solucionar estos inconvenientes se han desarrollado diversas metodologías alternativas para la detección identificación y cuantificación de microorganismos patógenos de origen alimentario, entre las que destacan los métodos inmunológicos y moleculares. En esta última categoría, la técnica basada en la reacción en cadena de la polimerasa (PCR) se ha convertido en la técnica diagnóstica más popular en microbiología, y recientemente, la introducción de una mejora de ésta, la PCR a tiempo real, ha producido una segunda revolución en la metodología diagnóstica molecular, como pude observarse por el número creciente de publicaciones científicas y la aparición continua de nuevos kits comerciales. La PCR a tiempo real es una técnica altamente sensible -detección de hasta una molécula- que permite la cuantificación exacta de secuencias de ADN específicas de microorganismos patógenos de origen alimentario. Además, otras ventajas que favorecen su implantación potencial en laboratorios de análisis de alimentos son su rapidez, sencillez y el formato en tubo cerrado que puede evitar contaminaciones post-PCR y favorece la automatización y un alto rendimiento. En este trabajo se han desarrollado técnicas moleculares (PCR y NASBA) sensibles y fiables para la detección, identificación y cuantificación de bacterias patogénicas de origen alimentario (Listeria spp., Mycobacterium avium subsp. paratuberculosis y Salmonella spp.). En concreto, se han diseñado y optimizado métodos basados en la técnica de PCR a tiempo real para cada uno de estos agentes: L. monocytogenes, L. innocua, Listeria spp. M. avium subsp. paratuberculosis, y también se ha optimizado y evaluado en diferentes centros un método previamente desarrollado para Salmonella spp. Además, se ha diseñado y optimizado un método basado en la técnica NASBA para la detección específica de M. avium subsp. paratuberculosis. También se evaluó la aplicación potencial de la técnica NASBA para la detección específica de formas viables de este microorganismo. Todos los métodos presentaron una especificidad del 100 % con una sensibilidad adecuada para su aplicación potencial a muestras reales de alimentos. Además, se han desarrollado y evaluado procedimientos de preparación de las muestras en productos cárnicos, productos pesqueros, leche y agua. De esta manera se han desarrollado métodos basados en la PCR a tiempo real totalmente específicos y altamente sensibles para la determinación cuantitativa de L. monocytogenes en productos cárnicos y en salmón y productos derivados como el salmón ahumado y de M. avium subsp. paratuberculosis en muestras de agua y leche. Además este último método ha sido también aplicado para evaluar la presencia de este microorganismo en el intestino de pacientes con la enfermedad de Crohn's, a partir de biopsias obtenidas de colonoscopia de voluntarios afectados. En conclusión, este estudio presenta ensayos moleculares selectivos y sensibles para la detección de patógenos en alimentos (Listeria spp., Mycobacterium avium subsp. paratuberculosis) y para una rápida e inambigua identificación de Salmonella spp. La exactitud relativa de los ensayos ha sido excelente, si se comparan con los métodos microbiológicos de referencia y pueden serusados para la cuantificación de tanto ADN genómico como de suspensiones celulares. Por otro lado, la combinación con tratamientos de preamplificación ha resultado ser de gran eficiencia para el análisis de las bacterias objeto de estudio. Por tanto, pueden constituir una estrategia útil para la detección rápida y sensible de patógenos en alimentos y deberían ser una herramienta adicional al rango de herramientas diagnósticas disponibles para el estudio de patógenos de origen alimentario.

Controlo microbiológico de formulações farmacêuticas parentéricas

O controlo microbiológico de formulações injectáveis visa garantir a isenção de um produto farmacêutico em termos microrganismos, possivelmente patogénicos, que possam induzir sintomas patológicos após a sua administração. Assim, o estudo das técnicas que permitam a eliminação de agentes patogénicos e a sua prevenção é de extrema importância. Nesta área são utilizadas diversas técnicas clássicas para avaliar determinados medicamentos e estão a ser desenvolvidas outras novas técnicas. Estas últimas revelam-se mais vantajosas comparativamente às clássicas uma vez que apresentam maior eficácia e rigor. Este artigo de revisão apresenta uma descrição simples das principais técnicas disponíveis (clássicas e as mais recentes) para o controlo microbiológico de medicamentos injectáveis podendo ser visto como uma ferramenta prática útil para os profissionais que trabalham ou poderão vir a trabalhar nesta área.

Avaliação de diferentes tipos de atmosferas modificadas na vida útil de carambolas minimamente processadas

Este trabalho teve por objetivo a avaliação da vida útil potencial de carambolas cv. Golden Star, minimamente processadas, armazenadas em diferentes tipos de embalagens plásticas, para a concepção da atmosfera modificada. Os frutos colhidos fisiologicamente maturos apresentaram coloração verde-amarelada, sólidos solúveis (SS) médios de 6,8 ºBrix e massa média de 185 g. Antes da aplicação dos tratamentos, os frutos foram selecionados, higienizados em solução de hipoclorito de sódio (NaOCl) a 100 mg. L-1, resfriados por 12 horas a 15 ± 0,5 °C, seccionados transversalmente, sendo então novamente higienizados em solução de NaOCl a 10 mg.L-1, por 3 minutos. em seguida, os pedaços em forma de estrelas foram acondicionados em bandejas rígidas de poliestireno, com capacidade para 250 g, e revestidas com os seguintes materiais: T1: filme plástico perfurado de polietileno de baixa densidade (PEBD), de 0,006 mm; T2: filme plástico poliolefínico com antiembassamento da Dupont® (AGF), de 0,015 mm; T3: filme plástico poliolefínico da Dupont® (HF), de 0,015 mm; T4: filme plástico de PEBD, de 60 µm; T5: filme plástico de PEBD, de 80 µm; T6: filme plástico de polipropileno (PP), de 22 µm, e T7: bandeja rígida de polietileno tereftalato (PET), com capacidade para 500 mL, com tampa do mesmo material. As embalagens foram então armazenadas em câmara frigorífica a 12 ± 0,5 °C e 90 ± 3% de U.R, por 18 dias. Observou-se que não houve diferença significativa quanto aos sólidos solúveis (SS) e acidez titulável (AT). O maior número de microrganismos e valor de pH foram observados nos frutos embalados nos filmes plásticos de PEBD de 0,006 mm, AGF e HF de 0,015 mm da Dupont®. Entretanto, os frutos acondicionados nas embalagens PET apresentaram o maior teor de ácido ascórbico. da mesma forma, somente nas embalagens PET é que se conseguiu modificação atmosférica eficiente do ponto de vista da manutenção dos atributos de qualidade durante o AR. Assim, esse tratamento proporcionou adequado controle microbiológico e manutenção das características de qualidade por 18 dias para as carambolas minimamente processadas.

Susceptibility of the ant-cultivated fungus Leucoagaricus gongylophorus (Agaricales : Basidiomycota) towards microfungi

The aim of this study was to select virulent strains of microfungi against Leucoagaricus gongylophorus, a symbiotic fungus cultivated by leaf-cutting ants. The results from in vitro assays showed that microfungal strains had a variable and significant impact on the colony development of L. gongylophorus. Specifically, Trichoderma harzianum, Escovopsis weberi CBS 810.71 and E. weberi A088 were more effective, inhibiting the L. gongylophorus colonies by 75, 68 and 67%, respectively (P < 0.05) after 15 days. Strain E. weberi A086 and Acremonium kiliense were less effective: 43 and 26%, respectively (P < 0.05). In spite of the current negative perspective of a microbiological control approach for these ants, the present work discusses the possibility of using mycopathogenic fungi for the control of these insects, and points out the importance of encouraging more studies in this area.

Análise Microbiológica de Embalagens para o Acondicionamento de Medicamentos e Cosméticos

Microbiological Control of Packaging Materials for Medicines and Cosmetics. Several consumers and official agencies, associated with the necessity of more efficient, safety and good microbiological quality packaging materials, conducted to the challenge of having packages which assure both the integrity of products and consumer's health. However, the packaging material can be an important source of microorganisms when does not fulfill the microbiological quality requirements. The objective of this work was to study the microbiological quality of different types of packaging materials for medicines and cosmetics. The microbial quality studies were conducted by analyzing representative samples by bioassay. The packing materials were analyzed for microbiological quality to verify presence of viable microorganisms. They showed the analyzed packaging materials for medicines are in agreement with RDC # 481 on 23/9/1999 of ANVISA. However, the packages to store cosmetic material are not fulfilling this RDC. The microbiological quality control of packing materials has fundamental importance for public health.

Pharmacognostical evaluation of fruits of Solanum lycocarpum A. St.-Hill. (Solanaceae)

This study describes the chemical and physical-chemical profile of plant drug and ethanolic extract obtained from fruits of Solanum lycocarpum A. St.-Hill. (Solanaceae). The physical and chemical analysis involved the granulometry determination, non-compacted apparent density, loss on drying in oven and in infrared scale, pH, ash values and extractive values. The results determined the physical-chemical characteristics of the drug plant. It was also carried out the microbiological control of the plant drug. The preliminary phytochemical screening featured the presence of tannins, flavonoids and saponins in the plant drug and alkaloids and steroids in the ethanolic exctract. The solamargine and solasonine glycoalkaloids were identified through TLC and GC/ MS. The levels of total phenols and tannins were quantified in the extract (8.90% and 6,85% respectively). Such studies contribute to the chemical identification and quality control of S. lycocarpum fruits. © 2010 Phcog.net.

Avaliação da segurança e estudo da permeação e retenção cutânea de géis de ácido hialurônico

Pós-graduação em Ciências Farmacêuticas - FCFAR

Desenvolvimento e caracterização físico-química de sistemas nanoestruturados contendo palmitato de retinol: controle microbiológico, avaliação da segurança e eficácia no tratamento do envelhecimento cutâneo

Pós-graduação em Ciências Farmacêuticas - FCFAR