962 resultados para Methylene Chloride


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Organic geochemical studies on samples from Holes 487, 488, and 490 in the southern Mexico Middle America Trench provided an opportunity to characterize the organic fraction of the sedimentary section in an active trench environment and to project the petroleum-producing potential of the extracted lipid fractions. The samples were geologically young and of shallow burial history. Samples from Hole 487, located on the oceanic plate, range in age from late Miocene to middlelate Pleistocene. Samples from Hole 488, representing undifferentiated Quaternary sediment, were collected on the landward side of the lower trench slope. Miocene(?) to Quaternary sediments from Hole 490 were obtained from the upper slope immediately seaward of the inferred location of the continental crust.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In this work a simple and sensitive procedure to extract organic mercury from water and sediment samples, using methylene chloride in acidic media followed by CVAFS quantification has been developed. The method was evaluated for possible interferents, using different inorganic mercury species and humic acid, no effects being observed. The detection limit for organic mercury was 160 pg and 396 pg for water and sediment samples respectively. The accuracy of the method was evaluated using a certified reference material of methylmercury (BCR-580, estuarine sediment). Recovery tests using methylmercury as surrogate spiked with 1.0 up to 30.0 ng L-1 ranged from 90 up to 109% for water samples, whereas for sediments, recoveries ranged from 57 up to 97%.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In this study we report the screening of the in vitro trypanocidal activity of 20 extracts obtained from 10 different plant species growing in the Brazilian Cerrado: Aspidosperma macrocarpum Mart. (Apocynaceae), Aegiphila sellowiano Cham. (Verbenaceae), Byrsonima intermedia Juss. (Malpighiaceae), Cyperus rotundus L. (Cyperaceae), Leandra lacunosa Cogn. (Melastomataceae), Miconia ligustroides (DC.) Naudin. (Melastomataceae), Miconia sellowiana Naudin.(Melastomataceae),Myrcia variabilis Mart.ex DC. (Myrtaceae), Solanum lycocarpum St. Hil. (Solanaceae), and Tibouchina stenocarpa Cogn. (Melastomataceae). The most active extracts were submitted to phytochemical analyses. High-resolution gas chromatography analysis of the n-hexane extract of T. stenocarpa (IC(50) = 23.6 mu g/mL), the most active extract amongst all the tested samples, allowed the identification of beta-amyrin, alpha-amyrin, lupeol, friedelin, beta-friedelanol, campesterol, stigmasterol, and beta-sitosterol. Oleanolic and ursolic acids were isolated from the methylene chloride extract of T stenocarpa (IC(50) = 51.5 mu g/mL), while ursolic acid was isolated from the methylene chloride extract of M. variabilis (IC(50)=38.4 mu g/mL). Solasonine and solamargine were identified as major compounds by mass spectrometry analysis in the hydroalcoholic extract of the fruits of S. lycocarpum (IC(50)=57.1 mu g/mL).The results showed that the trypanocidal activity may be related to the major compounds identified in the crude active extracts.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In this work a simple and sensitive procedure to extract organic mercury from water and sediment samples, using methylene chloride in acidic media followed by CVAFS quantification has been developed. The method was evaluated for possible interferents, using different inorganic mercury species and humic acid, no effects being observed. The detection limit for organic mercury was 160 pg and 396 pg for water and sediment samples respectively. The accuracy of the method was evaluated using a certified reference material of methylmercury (BCR-580, estuarine sediment). Recovery tests using methylmercury as surrogate spiked with 1.0 up to 30.0 ng L-1 ranged from 90 up to 109% for water samples, whereas for sediments, recoveries ranged from 57 up to 97%.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Des ligands diketimines porteurs de substituants N-benzyl, N-9-anthrylmethyl et N-mesitylmethyl (nacnacBnH, nacnacAnH, and nacnacMesH) ont été synthétisés par condensation d’une amine et d’acétyl acétone ou son monoacétal d’éthylène glycol. La chlorination de la position 3 a été effectuée à l’aide de N-chlorosuccinimide conduisant à la formation des ligands ClnacnacBnH et ClnacnacAnH. Cette même position 3 a également été substituée par un groupement succinimide par lithiation du nacnacBnH, suivi de la réaction avec le N-chlorosuccinimide (3-succinimido-nacnacBnH). Les ligands N-aryl nacnacippH et nacnacNaphH (ipp = 2-isopropylphenyl, Naph = 1-naphthyl) ont été préparés selon les procédures reportées dans la littérature. La réaction de ces ligands avec Zn(TMSA)2 (TMSA = N(SiMe3)2) conduit à la formation des complexes nacnacAnZn(TMSA) et ClnacnacBnZn(TMSA). La protonation avec l’isopropanol permet l’obtention des complexes nacnacAnZnOiPr et ClnacnacBnZnOiPr. La réaction avec Mg(TMSA)2 permet quant à elle la formation des complexes nacnacAnMg(TMSA), nacnacMesMg(TMSA), ClnacnacBnMg(TMSA) et ClnacnacAnMg(TMSA). La protonation subséquente à l’aide du tert-butanol permet l’obtention du nacnacMesMgOtBu et du ClnacnacBnMgOtBu, alors que l’on observe uniquement une décomposition avec les ligands possédant des substituants N-anthrylmethyl. La réaction de ces diketimines avec Cu(OiPr)2 conduit aux dimères hétéroleptiques [nacnacBnCu(μ-OiPr)]2 et [3-Cl-nacnacBnCu(μ-OiPr)]2 lors de l’usage des ligands stériquement peu encombrés. Lors de l’utilisation de ligands plus encombrés, la stabilisation du complexe hétéroleptique par dimérisation n’est plus possible, conduisant, par un échange de ligand, à la formation des complexes homoleptiques Cu(nacnacipp)2 et Cu(nacnacNaph)2. Les complexes homoleptiques Cu(nacnacBn)2 et Cu(3-succinimido-nacnacBn)2 ont été obtenus à partir des ligands N-benzyl. Les ligands encore plus encombrés tels que nacnacAnH, nacnacMesH ou ceux comportant des substituants N-methylbenzyl ne présentent alors plus de réactivité avec le Cu(OiPr)2. La plupart des complexes ont été caractérisés par Diffraction des Rayons X. Les complexes homoleptiques ainsi que ceux de TMSA sont monomériques, alors que ceux formés à partir d’alkoxides se présentent sous forme de dimères à l’état solide. Tous les complexes d’alkoxides ainsi que les nacnacAnMg(TMSA)/BnOH et ClnacnacAnMg(TMSA)/BnOH présentent une réactivité modérée à haute en matière de polymérisation du rac-lactide (90% de conversion en 30 secondes à 3 heures). Le nacnacAnZnOiPr permet la synthèse d’un polymère hautement hétérotactique (Pr = 0.90) quand le ClnacnacBnMgOtBu/BnOH génère un polymère isotactique à -30°C (Pr = 0.43). Tous les autres catalyseurs produisent des polymères atactiques avec une légère tendance hétérotactique (Pr = 0.48 – 0.55). Les complexes hétéroleptiques [nacnacBnCu(μ-OiPr)]2 et [3-Cl-nacnacBnCu(μ-OiPr)]2 se révèlent être de très bons catalyseurs pour la polymérisation du rac-lactide présentant une conversion complète du monomère à température ambiante, en solution, en 0,5 à 5 minutes. Le [nacnacBnCu(μ-OiPr)]2 est actif en présence ou absence d’isopropanol, agissant comme agent de transfert de chaine à haute activité (k2 = 32 M–1•s–1) dans le dichlorométhane. Dans l’acétonitrile, le THF, le dichloromethane et le toluène, [nacnacBnCu(μ-OiPr)]2 conduit à une étroite polydispersité, possédant respectivement des kobs = 2.4(1), 5.3(5), 3.6-4.4 and 10(1) min–1. Aucune réaction parasite, telle qu’une trans-esterification, une épimerisation ou une décomposition du catalyseur, n’a été observée. Les complexes homoleptiques en présence d’alcool libre semblent présenter un équilibre avec une petite quantité de leurs équivalents hétéroleptiques, permettant une polymérisation complète, en moins de 60 min, à température ambiante. Tous les catalyseurs de cuivre présentent un haut contrôle de la polymérisation avec une polydispersité égale ou inférieure à 1.1. Les polymères obtenus sont essentiellement atactiques, avec une légère tendance à l’hétérotacticité à température ambiante et -17°C. Le [nacnacBnCu(μ-OiPr)]2 polymérise également la -butyrolactone (BL), l’-caprolactone (CL) et la -valerolactone (VL) avec des constantes respectivement égales à kobs = 3.0(1)•10–2, 1.2–2.7•10–2, et 0.11(1) min–1. Les homopolymères présentent une étroite polydispersité d’approximativement 1.1. Les polymérisations par addition séquentielle ont mis en évidence une trans-estérification (non observée dans les homopolymérisations) si BL ou CL sont introduits après un bloc lactide.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Nanoparticles containing praziquantel made of Poly (D,L-lactide-co-glycolide) were designed by an emulsion-solvent evaporation method. Two organic solvents were separately utilized as disperse phase: methylene chloride and ethyl acetate. The size of the particles prepared with the former solvent was bigger than the particles prepared with the latter. The entrapment efficiency was bigger when methylene chloride was used, 79.82% in comparison with 29.27% by using ethyl acetate. DSC and infrared studies showed that no strong chemical interaction between drug and polymer occurred. Release kinetics of praziquantel, used as a model drug, was governed not only by actual drug loading but also by particles size. The higher the drug content and the smaller the particle size resulted in faster drug release.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The first isocoumarin isolated from the methylene chloride extract of Paepalanthus bromelioides, named paepalantine (isocoumarin 1), was found to have antimicrobial activity; but, it is mutagenic clastogenic and cytotoxic. Two other isocoumarins, paepalantine-9-O-beta-D-glucopyranoside (isocoumarin 2) and paepalantine-9-O-beta-D-allopyranosyl(1-->6) glucopyranoside (isocoumarin 3) were isolated from the ethanolic extract. A fourth new isocoumarin, also isolated from the methylene chloride extract of the capitula of P. bromelioides, was characterized as an 8-8' dimer of paepalantine and denominated isocoumarin 4. The abilities of isocoumarins 2, 3 and 4 to induce mutations in Salmonella typhimurium strains TA97a, TA98, TA100 and TA102 were investigated. Mutagenic activity was observed in strain TA97a treated with isocoumarin 2 in the presence of S9 mixture. The substitution of H at position 9 by glucose or glucose-allose caused reductions in the mutagenic activities of paepalantine, indicating this to be an important site for these properties. (C) 2003 Elsevier Ltd. All rights reserved.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A naphthopyranone dimer, named planifolin, was isolated from a methylene chloride extract of the capitula of Paepalanthus planifolius Koern. The molecule (C31H26O10) appeared to be made up of two monomeric portions, semi-vioxanthin and paepalantine (an isocoumarin), linked by an ether bond, and it may possess several kinds of biological activity that can be related to its polyphenolic structure. Short-term tests that detect genetic damage can afford the information needed to evaluate carcinogenic risks of chemicals to humans. The Ames test, recommended for testing the mutagenicity of chemical compounds with potential pharmacological application, was used in the present study. The mutagenic activity was evaluated in Salmonella typhimurium strains TA100, TA98, TA102 and TA97a and the cytotoxic effect in McCoy cells. The in vitro cytotoxicity of planifolin to McCoy cells, tested in microculture with neutral red, showed a significant cytotoxic index (CI50) of 12.83 mu g/mL. Planifolin showed mutagenic activity for TA100, TA98 and TA97a. The results indicate that this new naphthopyranone dimer causes mutations by substitution and by addition and deletion of bases in the sequence of DNA. Moreover, its mutagenic potential was increased by metabolic activation. (c) 2005 Elsevier Ltd. All rights reserved.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Methylene chloride, ethyl acetate and methanolic extracts front the stem bark of Bauhinia guianensis (Leguminosae, Caesalpinoideae) were obtained. These extracts were evaluated for antiinflammatory activity which was conducted using carrageenin, dextran and histamine-induced paw edema in rats. The extracts of B. guianensis were also assessed for analgesic activity which was conducted using the writhing test in mouse. The different animal groups were treated with these extracts (100 mg/kg i.p. and p.o, IC50) 30 min prior to the application of stimuli. The methanolic extract demonstrated significant inhibition in the carrageenin-induced edema model. In the dextran-induced edema model, all three extracts inhibited the inflammatory process significantly with the methanolic extract being the most active. The ethyl acetate extract was the only one shown to be effective in the histamine-induced edema model. Finally all extracts inhibited effectively the algogenic process in the writhing test induced by acetic acid.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Fly soot samples collected in the sugar cane fields after the process of burning were extracted in a Soxhlet apparatus (methylene chloride:methanol 4:1). The extracts were fractionated on silica gel Sep-Pak cartridges into three fractions. A gas chromatographic-mass spectrometric study of the fly soot extracts allowed the identification of the PAH with mutagenic and carcinogenic properties. Large amounts of aliphatic hydrocarbons, fatty acid esters and some PAHs were identified by GCMS in full scan mode. GC-MS in the selective ion monitoring mode (SIM) was suitable for the determination of many PAHs, which are often present in the burnt biomass. 31 PAHs and 7 thiophens derivatives were identified. The presence of these compounds should be regarded as a caution to workers and the general population to avoid exposure to the fly soot.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A new naphthopyranone dimer (I) named planifolin was isolated from a methylene chloride extract of the capitula of Paepalanthus planifolius. The structure of 1 has been determined by chemical and spectroscopic means. In addition, a known dihydronaphthopyranone glycoside and seven known flavonoids were isolated from an ethanolic extract of the leaves of P. planifolius.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The crude ethanolic extract from aerial parts of Pothomorphe umbellata L. (Piperaceae) and fractions obtained by partitions sequentially among water-methanol, methylene chloride, and ethyl acetate, as well as the major constituent, 4-nerolidylcatechol, were, respectively, evaluated and evidenced for antioxidant and cytotoxic effects through fluorometric microplate and microculture tetrazolium assays in HL-60 cells. The crude ethanolic extract demonstrated the preeminent antioxidant activity (IC50 = 1.2 μg/mL) against exogenous cytoplasmic reactive oxygen species, followed by the water-methanolic (IC50 = 4.5 μg/mL), methylene chloride (IC 50 = 5.9 g/mL), ethyl acetate (IC50 = 8.0 g/mL), 4-nerolidylcatechol (IC50 = 8.6 g/mL), and the sterol fractions (IC50 > 12.5 μg/mL). Vitamin C, the positive control used in this assay, presented IC50 value equivalent to 1.7 μg/mL. 4-Nerolidylcatechol (IC50 = 0.4 μg/mL) and methylene chloride fraction (IC50 = 2.3 μg/mL) presented considerable cytotoxicity probably because of the presence of an o-quinone, an auto-oxidation by product of the catechol. Polar compounds, present in the ethanol extract, appear to increase the solubility and stability of the major active constituent, acting synergistically with 4-nerolidylcatechol, improving its pharmacokinetic parameters and increasing significantly its antioxidant activity which, in turn, suggests that the aqueous-ethanolic extract, used in folklore medicine, is safe and effective. © 2013 Andrey P. Lopes et al.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

An exposure system was constructed to evaluate the performance of a personal organic vapor dosimeter (3520 OVM) at ppb concentrations of nine selected target volatile organic compounds (VOCs). These concentration levels are generally encountered in community air environments, both indoor and outdoor. It was demonstrated that the chamber system could provide closely-controlled conditions of VOC concentrations, temperature and relative humidity (RH) required for the experiments. The target experimental conditions included combinations of three VOC concentrations (10, 20 and 200 $\rm\mu g/m\sp3),$ three temperatures (10, 25 and 40$\sp\circ$C) and three RHs (12, 50 and 90% RH), leading to a total of 27 exposure conditions. No backgrounds of target VOCs were found in the exposure chamber system. In the exposure chamber, the variation of the temperature was controlled within $\pm$1$\sp\circ$C, and the variation of RH was controlled within $\pm$1.5% at 12% RH, $\pm$2% at 50% RH and $\pm$3% at 90% RH. High-emission permeation tubes were utilized to generate the target VOCs. Various patterns of the permeation rates were observed over time. The lifetimes and permeation rates of the tubes differed by compound, length of the tube and manufacturer. By carefully selecting the source and length of the tubes, and closely monitoring tube weight loss over time, the permeation tubes can be used for delivering low and stable concentrations of VOCs during multiple days.^ The results of this study indicate that the performance of the 3520 OVM is compound-specific and depends on concentration, temperature and humidity. With the exception of 1,3-butadiene under most conditions, and styrene and methylene chloride at very high relative humidities, recoveries were generally within $\pm$25% of theory, indicating that the 3520 OVM can be effectively used over the range of concentrations and environmental conditions tested with a 24-hour sampling period. Increasing humidities resulted in increasing negative bias from full recovery. Reverse diffusion conducted at 200 $\rm\mu g/m\sp3$ and five temperature/humidity combinations indicated severe diffusion losses only for 1,3-butadiene, methylene chloride and styrene under increased humidity. Overall, the results of this study do not support the need to employ diffusion samplers with backup sections for the exposure conditions tested. ^