996 resultados para Metamafic rocks
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
A formação ferrífera do Serrote do Breu e de Alto das Pedras localiza-se no município de Campo Grande, Estado de Alagoas e está sendo pesquisada quanto ao seu potencial como minério de ferro. Ela está inserida em um domo de embasamento arqueano no interior da Faixa Sergipana, o Domo de Jirau de Ponciano. A área de estudo é caracterizada por dois altos topográficos denominados Serrote do Breu e Alto das Pedras, sustentados pela formação ferrífera, e que representam flancos opostos de um sinformal inclinado, com direção N60W e forte mergulho para sul, e extensão total de aproximadamente 2 km. A formação ferrífera ocorre em diversas camadas intercaladas em gnaisses quartzo-feldspáticos e em rochas metamáficas. Os primeiros foram agrupados na unidade de gnaisses quartzo-feldspáticos e as últimas na suíte intrusiva máfica-ultramáfica. Na porção interior do sinformal estão quartzitos e paragnaisses agrupados na unidade metassedimentar e cortando essas unidades há uma unidade de pegmatitos. A formação ferrífera é constituída por quartzo, hematita, anfibólio e magnetita. O anfibólio é em geral cummingtonita, mas riebeckita também ocorre subordinadamente. Os teores médios de SiO2, e Fe2O3t são 43,1% e 50,7%, respectivamente, e, assim como os demais elementos maiores, são compatíveis com outras formações ferríferas do mundo. Com base na petrografia e geoquímica de elementos terras raras os gnaisses quartzo-feldspáticos foram divididos em gnaisses bandados e gnaisses com titanita. Ambos apresentam composição riolítica e trend calcio-alcalino. Já as rochas metamáficas e metaultramáficas apresentam composição basáltica a andesítica e trend toleítico completamente dissociado daquele dos gnaisses. Acredita-se que os gnaisses quartzo-feldspáticos e as rochas metamáficas e metaultramáficas tenham se formado em ambientes tectônicos totalmente distintos, com as últimas tendo se formado provavelmente intrusivas nos primeiros.
Resumo:
Since the discovery of coesite-bearing eclogites in Dabie and Sulu region over ten years ago, the Dabie collisional orogen has been the "hot-spot" across the world. While many great progresses have been made for the last decade in the researches on the Dabie and Sulu UHP metamorphic rocks in the following fields, such as, petrology, mineralogy, isotope chronology, and geochemistry, the study of the structural geology on the Dabie orogen is still in great need. Thrust and nappe tectonics commonly developed in any collisional orogenic belt during the syncollisional process of the orogen. It is the same as the Dabic collisional orogen is concerned. The paper put much stress on the thrust and nappe tectonics in the Dabic orogenic belt, which have been seldom systematically studied before. The geometric features including the division and the spatial distribution of various thrust and nappe tectonics in the Dabie orogen have been first studied, which is followed by the detailed studies on their kinematic characteristics in different scales varying from regional tectonics to microtectonics. In the thesis, new deformation ages have been obtained by the isotopic methods of ~(40)Ar-~(39)Ar, Sm-Nd and Rb-Sr minerals-whole rock isochrons on the mylonites formed in three ductile shear zones which bounded three different major nappes in the Dabie collisional orogenic belt. And the petrological, geochemical characteristics of some metamorphic rocks as well as the geotectonics of their protoliths, which have also deformed in the ductile shear zone, are analyzed and discussed. In the paper, twelve nappes in the Dabie orogen are first divided, which are bounded by various important NWW or NW-strike faults and three NNE-strike faults. They are Shangcheng Nappe, Huoshan Nappe, Yuexi Nappe, Yingshanjian-Hengzhong Nappe, Huangzhen Nappe, Xishui-Huangmei Nappe, Zhoudang Nappe, Suhe-Huwan Nappe, Xinxian Nappe, Hong'an Nappe, Mulan Nappe and Hhuangpi-Susong Nappe. In the Dabie orogen, three types of thrust and nappe tectonics belonging to two stages have been confirmed. They are: (1) early stage ductile thrust -nappe tectonics which movement direction was top-to-the-south; (2) late stage brittle to ductile-brittle thrust-nappe tectonics which are characterized by double-vergence movement, including top-to-the-north and top-to-the-south; (3) the third type also belongs to the late stage which also characterized by double-vergence movement, including top-to-the-east and top-to-the-west, and related to the strike-slip movement. The deformation ages of both Wuhe-Shuihou ductile shear zone and Taihu-Mamiao ductile shear zone have been dated by ~(40)Ar-~(39)Ar method. ~(40)Ar/~(39)Ar plateau ages of biotite and mica from the mylonites in these two shear zones are 219.57Ma and 229.12Ma. The plateau ages record the time of ductile deformation of the ductile shear zones, which made the concerned minerals of the mylonites exhume from amphibolite facies to the middle-upper crustal conditions by the early stage ductile thrust-nappe tectonics. The mineral isochons of Sm-Nd and Rb-Sr dating on the same mylonite sample of the metamafic rocks are 156.5Ma and 124.56Ma respectively. The two isochron ages suggest that the mylonitic rock strongly deformed in the amphilbolite facies at 156Ma and then exhumed to the upper crustal green schist condition at 124Ma with the activities of the Quiliping-Changlinggang ductile shear zone which bounded to the southen edge of Xinxian Nappe. Studies of the petrological and geochemical characteristics of some meta-mafic rocks and discussion on the geotectonics of their protoliths indicate that their protoliths were developped in an island arc or back-arc basin or active continental margin in which calc-alkline basalts formed. This means that arc-accretion orogeny had evolved in the margins of North china plate and/or Yangtze plate before these two plates directly collided with each other during the evolution process of Dabie orogen. Three-stage evolution of the thrust-nappe tectonics in Dabie collisional orogen has been induced based on the above-mentioned studies and previous work of others. And a possible 3-stage exhumation model (Thrust-Positive Flower Structure Model) has also been proposed.
Resumo:
Metamafic orthoderivate rocks, characterized by MORB signatures and paleoproterozoic ages occur in Cajamar region central east part of São Paulo State, Brazil. They are associated to philites, metasandstones and metalimestones of São Roque Group volcanosedimentary sequence, Southeastern portion of the Ribeira Belt. For the metamafic rocks the assemblage of metamorphic peak is represented by actinolitealbite- epidote-chlorite typical of regional metamorphism, greenschist facies. For a good characterization of P and T parameters of metamorphism microprobe analyses of main minerals were performed. Metamorphism did not destroy completely the primary mineralogy of original basalt and microgabbro, and augite crystals are registered in many samples, preserved together with metamorphic assemblage, and possibly indicate that the igneous temperatures of crystallization are between 900 and 1.100°C. Textures of mineral equilibrium for the peak paragenesis are not always present in the studied samples. It may be partially caused by the superposition of retrometamorphic events that is a consequence of regional shearing process. Where the equilibrium is reached, chiefly in the occurrences in the south of the area temperature and pressure determinations indicate values close to 487 ± 42°C and 8,2 ± 2.0 kbar, respectively. Other values for P and T lower than that of the peak were also obtained in central and north portion of the area and they are: 450 ± 68°C for T e 4.7 kbar for P and 315 ± 26°C for T and 3.0 kbar for P and may indicate that the mineral equilibrium was not reached in these samples or that they represent the retrometamorphic event. As a concluding remark considering the metamorphic P-T path now obtained one can say that the exhumation process in this area occurred by isothermal decompression.
Resumo:
The study area of the Guarda-Mor target (Israelândia-GO) contextualizes the terrains of the estaern portion of the Arenópolis Magmatic Arc, more accurately, the Neoproterozoic associations inserted in the field of the Jaupaci volcano-sedimentary sequence. The mapped area is located in the central-western of Goiás state. The presente paper has as main objective to characterize the structural, petrographic and litogeochemistry of the target rocks beyond to compare these factors with the Mina Bacilândia rocks (Fazenda Nova-GO) in order to assess the genetic similarity of volcano-sedimentary units and deposits associated. The Guarda-Mor target is represented by the Jaupaci metavolcanic rocks sequence presenting bimodal volcanism. This sequence consists in metafelsic rocks like sericite/muscovite quartz schist, phyllite and metarriolites and/or metariodacites with calc-alkaline geochemical signature and metamafic rocks with tholeiitic character formed by actinolite - chlorite schist and chlorite - quartz schist. Besides the package of supracrustal rocks also can be observed the occurrence of a local intrusion syn- to late - tectonic named Granito Subvulcânico. In the study area beyond the marked volcanism also seen an event of crustal melting granitogênese evidenced by the presence of 2 granites at the east and the west of the map, Granito Israelândia and Granito Iporá respectively. Structural analysis both at the macro and micro have identified 3 deformation phases. The types of rock on the region record features in the metamorphic facies top and down. These features were subdivided into 3 metamorphic areas: the east and West areas show thermal metamorphism due to intrusion of adjacente granites while the central domain displays features of regional metamorphism. Gold mineralization of the Guarda –Mor deposit target suggests a possible structural control beyond pronounced the hydrothermal alteration. The mineralization may also be...
Resumo:
The Mangabal Sul and Mangabal Norte mafic-ultramafic complexes are interpreted as intrusive stratiform bodies in the Goiás Magmatic Arc during the Brazilian cycle, being economically important for harboring significant amounts of nickel and copper sulfides. The main lithotypes of the complexes are gabbronorites, olivine gabbronorites, pyroxenites and peridotites, with variated degrees of deformation, recrystallization and metamorphism superimposed, with metamorphic peak of amphibolite to granulite facies evidenced mainly by the occurrence of coronitic olivine in metamafic rocks and the occurrence of syn-kinematic retrometamorphism associated with the development of the main foliation Sn. The Sn foliation planes show NE-SW preferential direction, consistent with the foliation direction of VIII the enclosing gneisses and schists, also concordant with the general elongation of mafic and ultramafic bodies displayed on map. The sulfide phase presents textures that indicate remobilization, associated with the occurrence of significant amounts of rutile within the ore which reinforces this idea. Along with the sulfides, the occurrence of expressive quantities of titanium oxides such as ilmenite and rutile, make the area more economically attractive. It can be suggested that the Mangabal Norte and Mangabal Sul complexes are contemporary, have the same genetic affinity and suffered the same deformational and metamorphic processes, evidenced by their structural and petrological similarities
Resumo:
The region Indiara (GO) is located in southwestern of São Francisco Craton in the Internal Zone of the Brasília Belt, western part of the Tocantins Province. In this locality outcrop rocks of the Goiás Magmatic Arc. These rocks are muscovite gneiss with biotite, muscovite-biotite gneiss, biotite gneiss with muscovite and garnet, biotite-muscovite gneiss, muscovite porfiroclastic gneiss, biotite porfiroclastic gneiss, muscovite-quartz schists, garnetquartz schists, and metamafic rock (hornblende schists) as metric or kilometric lenses. The gneisses have granodioritic composition, granoblastic texture, with some portions with lepidoblastic texture, constituting a discontinuous centimeter to millimeter banding; the structure is anisotropic, marked by the preferred orientation of all the minerals. These gneisses are leucocratic, generally are inequigranular and fine to medium grained. The hornblende schists have nematoblastic texture, are inequigranular and fine to medium grained and have anisotropic structure that is given by a foliation, marked by a strong preferential orientation of the crystals of amphibole and other minerals present in the rock. The gneisses of the area are composed of plagioclase (oligoclase/andesine), quartz, microcline, muscovite, biotite, epidote, apatite, zircon, garnet, kyanite, oxides and hydroxides of iron and opaque minerals. And the metamafic rocks of Indiara region are composed mainly of amphibole, plagioclase (oligoclase/andesine), quartz, titanite, biotite, allanite, garnet, oxides and hydroxides of iron, apatite, epidote, rutile, muscovite and opaque minerals. At least three phases of deformation were observed in the rocks of area of study (Dn-1, Dn and Dn +1). The Dn phase and represented by a well-marked foliation Sn having low dip angle (average dip of 20 °) and dip direction to SW (210/21) and to NE (18/20); the Dn-1 phase is represented by a compositional banding (Sn- 1), this banding is generally...
Resumo:
New geochemical data on serpentinite muds and metamorphic clasts recovered during Ocean Drilling Program Legs 195 (Holes 1200A-1200E) and 125 (Holes 778A and 779A) provide insights into the proportions of rock types of various sources that compose the serpentinite mudflows and the fluid-rock interactions that predominate in these muds. We interpret the metamorphic rock fragments as derivatives of mostly metamorphosed mafic rocks from the descending Pacific oceanic crust. Based on their mid-ocean-ridge basalt (MORB)-like Al2O3, TiO2, CaO, Si/Mg, and rare earth element (REE) systematics, these metamorphic rocks are classified as metabasalts/metagabbros and, therefore, ~30-km depths represent an active subduction zone setting. The serpentinite muds from Holes 1200A and 1200E have slightly lower REE when compared to Hole 1200D, but overall the REE abundance levels range between 0.1-1 x chondrite (CI) levels. The chondrite-normalized patterns have [La/Sm]N ~ 2.3 and [Sm/Yb]N ~ 2. With the exception of one sample, the analyzed metamorphic clasts show flat to slightly depleted light REE patterns with 1.0-15 x CI levels, resembling MORBs. Visually, ~6 vol% of the serpentinized muds are composed of 'exotic' materials (metamorphic clasts [schists]). Our mixing calculations confirm this result and show that the serpentinite muds are produced by additions of ~5% metamafic materials (with flat and up to 10 x CI REE levels) to serpentinized peridotite clast material (with very low REE abundances and U-shaped chondrite-normalized patterns). The preferential incorporation of B, Cs, Rb, Li, As, Sb, and Ba into the structure of H2O-bearing sheet silicates (different than serpentine) in the Leg 125 and Leg 195 metamorphic clasts (chlorite, amphibole, and micas) have little effect on the overall fluid-mobile element (FME) enrichments in the serpentinite muds (average B = ~13 ppm; average Cs = ~0.05 ppm; average As = ~1.25 ppm). The extent of FME enrichment in the serpentinized muds is similar to that described for the serpentinized peridotites, both recording interaction with fluids very rich in B, Cs, and As originating from the subducting Pacific slab.
Resumo:
The environmental scanning electron microscope (ESEM) has been used to image liquid hydrocarbons in sandstones and oil shales. Additionally, the fluid sensitivity of selected clay minerals in hydrocarbon reservoirs was assessed via three case studies: HCl acid sensitivity of authigenic chlorite in sandstone reservoirs, freshwater sensitivity of authigenic illite/smectite in sandstone reservoirs, and bleach sensitivity of a volcanic reservoir containing abundant secondary chlorite/corrensite. The results showed the suitability of using ESEM for imaging liquid hydrocarbon films in hydrocarbon reservoirs and the importance of simulating in situ fluid-rock interactions for hydrocarbon production programmes. In each case, results of the ESEM studies greatly enhanced prediction of reservoir/borehole reactions and, in some cases, contradicted conventional wisdom regarding the outcome of potential engineering solutions. (C) 1993 Wiley-Liss, Inc.
Resumo:
Experiments were carried out on the sodium hypochlorite bleach sensitivity of a deep subsurface andesitic reservoir in order to predict possible deleterious mineral transformations during a downhole clean-up job. Experiments involved examination of core samples from the reservoir using an Environmental Scanning Electron Microscope (ESEM) with an attached Energy Dispersive Spectrometer (EDS) before and after the samples were immersed in bleach. Bleach immersion of whole-rock samples resulted in rapid (less than 1 min) precipitation of abundant 3.0-10.0-μm-wide calcite rhombs within clay-associated micropores and on clay and feldspar grain surfaces. Abundant microporefilling calcite rhombs also formed in pure separates of constituent chlorite/corrensite, whereas no calcite formed in a pure separate of constituent zeolite. These experiments indicate that corrensite is the likely calcium source in this experimental fluid-rock system. Formation of calcite occurs via a cation exchange reaction in which calcium in the smectitic interlayers of corrensite exchanges for sodium in the bleach. Serious formation damage due to calcite precipitation would have occurred in the andesite reservoir had it been exposed to bleach. This finding gives credence to earlier suggestions that cation exchange reactions have the potential to cause calcite precipitation in some sandstone reservoirs when exposed to drilling, completion or stimulation fluids. © 1993.
Resumo:
The Geothermal industry in Australia and Queensland is in its infancy and for hot dry rock (HDR) geothermal energy, it is very much in the target identification and resource definition stages. As a key effort to assist the geothermal industry and exploration for HDR in Queensland, we are developing a comprehensive and new integrated geochemical and geochronological database on igneous rocks. To date, around 18,000 igneous rocks have been analysed across Queensland for chemical and/or age information. However, these data currently reside in a number of disparate datasets (e.g., Ozchron, Champion et al., 2007, Geological Survey of Queensland, journal publications, and unpublished university theses). The goal of this project is to collate and integrate these data on Queensland igneous rocks to improve our understanding of high heat producing granites in Queensland, in terms of their distribution (particularly in the subsurface), dimensions, ages, and controlling factors in their genesis.