Ultrasonic measurement technique of burning metals in normal and reduced gravity

The in situ real time measurement of the regression rate of a melting interface (RRMI) is performed by the ultrasonic measurement system reported here. The RRMI is the rate at which a solid/liquid interface (SLI) moves along a metallic rod while burning in an oxygen-enriched atmosphere and is an important flatnmability indicator. The ultrasonic transducer and associated equipment used to drive the transducer and record the echo signal is described, along with the process that transforms the acquired signals into a RRMI value. Test rods of various metals and geometric shapes were burned at several test conditions in different test facilities. The RRMI results with quantified errors are presented and reviewed. The effect of reduced gravity on burning metals is important to space-applications and RRMI results obtained in a reduced gravity environment are also presented.

Instantaneous RRMI of iron rods in reduced gravity

Standard upward-burning promoted ignition tests (“Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres,” ASTM G4-124 [1] or “Flammability, Odor, Offgassing, and Compatibility Requirements and Test Procedures for Materials in Environments that Support Combustion,” NASA-STD-6001, NASA Test 17 [2]) were performed on cylindrical iron (99.95% pure) rods in various oxygen purities (95.0–99.98%) in reduced gravity onboard NASA JSC's KC-135 to investigate the effect of gravity on the regression rate of the melting interface. Visual analysis of experiments agrees with previous published observations showing distinct motions of the molten mass attached to the solid rod during testing. Using an ultrasonic technique to record the real-time rod length, comparison of the instantaneous regression rate of the melting interface and visual recording shows a non-steady-state regression rate of the melting interface for the duration of a test. Precessional motion is associated with a higher regression rate of the melting interface than for test periods in which the molten mass does not show lateral motion. The transition between the two types of molten mass motion during a test was accompanied by a reduced regression rate of the melting interface, approximately 15–50% of the average regression rate of the melting interface for the entire test.

The use of mathematical modelling in fire safety engineering

Fire is a form of uncontrolled combustion which generates heat, smoke, toxic and irritant gases. All of these products are harmful to man and account for the heavy annual cost of 800 lives and £1,000,000,000 worth of property damage in Britain alone. The new discipline of Fire Safety Engineering has developed as a means of reducing these unacceptable losses. One of the main tools of Fire Safety Engineering is the mathematical model and over the past 15 years a number of mathematical models have emerged to cater for the needs of this discipline. Part of the difficulty faced by the Fire Safety Engineer is the selection of the most appropriate modelling tool to use for the job. To make an informed choice it is essential to have a good understanding of the various modelling approaches, their capabilities and limitations. In this paper some of the fundamental modelling tools used to predict fire and evacuation are investigated as are the issues associated with their use and recent developments in modelling technology.

Instabilities and drop formation in cylindrical liquid jets in reduced gravity

The effects of convective and absolute instabilities on the formation of drops formed from cylindrical liquid jets of glycerol/water issuing into still air were investigated. Medium-duration reduced gravity tests were conducted aboard NASA's KC-135 and compared to similar tests performed under normal gravity conditions to aid in understanding the drop formation process. In reduced gravity, the Rayleigh-Chandrasekhar Equation was found to accurately predict the transition between a region of absolute and convective instability as defined by a critical Weber number. Observations of the physics of the jet, its breakup, and subsequent drop dynamics under both gravity conditions and the effects of the two instabilities on these processes are presented. All the normal gravity liquid jets investigated, in regions of convective or absolute instability, were subject to significant stretching effects, which affected the subsequent drop and associated geometry and dynamics. These effects were not displayed in reduced gravity and, therefore, the liquid jets would form drops which took longer to form (reduction in drop frequency), larger in size, and more spherical (surface tension effects). Most observed changes, in regions of either absolute or convective instabilities, were due to a reduction in the buoyancy force and an increased importance of the surface tension force acting on the liquid contained in the jet or formed drop. Reduced gravity environments allow better investigations to be performed into the physics of liquid jets, subsequently formed drops, and the effects of instabilities on these systems. In reduced gravity, drops form up to three times more slowly and as a consequence are up to three times larger in volume in the theoretical absolute instability region than in the theoretical convective instability region. This difference was not seen in the corresponding normal gravity tests due to the masking effects of gravity. A drop is shown to be able to form and detach in a region of absolute instability, and spanning the critical Weber number (from a region of convective to absolute instability) resulted in a marked change in dynamics and geometry of the liquid jet and detaching drops. (C) 2002 American Institute of Physics.

Fire safety barrier availability analysis

This paper shows several ways to analyse the performance of a safety barrier, depending on the objective to be achieved and present a method to analyse binary components usually present on sensor systems of safety barriers. An application example of a water-based fire system is presented and the Probability of Failure on Demand (PFD) of the sensor system is determined based on the analysis of pressure switches installed in this safety barrier. The knowledge of such information will allow the determination of safety barrier’s availability.

Fire safety engineering: Confronto tra approccio prescrittivo e prestazionale applicato ad una attivita alberghiera

La complessa materia della prevenzione incendi può essere approcciata secondo due strategie sostanzialmente differenti. Da una parte, l’approccio di tipo deterministico, imperante in Italia, si concretizza nell’emanazione di norme estremamente prescrittive e nel ricorso da parte del progettista a strumenti di calcolo molto semplici. Il pregio maggiore di tale approccio risiede senza dubbio alcuno nella sua estrema semplicità, nella garanzia di una certa omogeneità di applicazione e nella possibilità di erogare in tempi ragionevoli una formazione uniforme ed accettabile ai controllori. Mentre il limite più evidente consiste nella rigidità, talora eccessiva, delle prescrizioni normative e nelle procedure di calcolo da adottare. Dall’altra, un approccio di tipo ingegneristico (Fire Safety Engineering), seguito per lo più nei paesi anglosassoni, si basa sulla predizione della dinamica evolutiva dell’incendio tramite l’applicazione di idonei modelli di calcolo fisicamente basati (physically sound). Punto di forza di questa seconda strategia è la sua estrema flessibilità, che consente la simulazione d’incendi di complessità anche molto elevata. Per contro i limiti più evidenti di tale approccio risiedono nella problematica validazione sperimentale dei modelli in argomento, data la natura distruttiva delle prove che andrebbero condotte, nella spinta preparazione richiesta ai professionisti ed ancor più ai controllori, dato il proliferare negli anni di modelli anche molto diversi tra loro, ed, infine, nel caso di raffinati modelli di campo, in un onere computazionale non sempre sostenibile con i PC di comune diffusione. Allo stato attuale in Italia il ricorso alla Fire Safety Engineering è di fatto circoscritto alle applicazioni per le quali non esiste una specifica norma prescrittiva, su tutte la valutazione del rischio in attività a rischio di incidente rilevante e la Fire Investigation; talora essa è impiegata anche per la valutazione della sicurezza equivalente in occasione di richiesta di deroga a norme prescrittive.

Modellazione avanzata di un incendio in uno stabilimento industriale secondo i principi della fire safety engineering

Lo sviluppo di un incendio all’interno di depositi di liquidi infiammabili costituisce uno scenario particolarmente critico a causa della rilevanza delle conseguenze che ne possono scaturire. L’incendio causato dalla formazione di grandi pozze sviluppatesi a seguito di forature dei contenitori e il rapido coinvolgimento di tutto lo stoccaggio rappresentano uno scenario di incendio tipico di queste realtà. Si ha quindi la necessità di adottare provvedimenti atti a garantire specifici obiettivi di sicurezza tramite l’introduzione di misure antincendio. La prevenzione incendi, sino al 2007, era basata esclusivamente su norme di tipo prescrittivo, in base alle quali si definivano le misure di sicurezza secondo un criterio qualitativo. Successivamente l’ingegneria antincendio si è sempre più caratterizzata da approcci basati su analisi di tipo prestazionale, in grado di dimostrare il raggiungimento dell’obiettivo di sicurezza sulla base del comportamento reale d’incendio ottenuto mediante un’accurata simulazione del fuoco che ragionevolmente può prodursi nell'attività. La modellazione degli incendi è divenuta possibile grazie allo sviluppo di codici di fluidodinamica computazionale (CFD), in grado di descrivere accuratamente l’evoluzione delle fiamme. Il presente studio si inserisce proprio nell’ambito della modellazione CFD degli incendi, eseguita mediante il software Fire Dynamics Simulator (FDS). L’obiettivo dell’elaborato è studiare l’azione dell’impianto di spegnimento a schiuma sullo sviluppo di un incendio di pozza in un deposito di liquidi infiammabili, in termini di riduzione della potenza termica rilasciata dal fuoco, al fine di determinare le temperature massime raggiunte, in corrispondenza delle quali valutare il comportamento di resistenza strutturale degli edifici. Il presente lavoro è articolato in 6 capitoli. Dopo il Capitolo 1, avente carattere introduttivo, vengono richiamati nel Capitolo 2 i principali concetti della chimica e fisica degli incendi. Nel Capitolo 3 vengono esaminate le normative intese ad unificare l’approccio ingegneristico alla sicurezza antincendio. Il Capitolo 4 fornisce una dettagliata descrizione del software di calcolo, FDS - Fire Dynamics Simulator, adoperato per la modellazione dell’incendio. Nel Capitolo 5 si procede alla progettazione prestazionale che conduce alla determinazione della curva naturale d'incendio in presenza degli impianti di spegnimento automatici. Infine nel Capitolo 6 si riportano le considerazioni conclusive.

Teaching safety at a summer camp: Evaluation of a children's fire safety curriculum in an urban community setting

Objectives: The purpose of this study was to evaluate the effectiveness of the Danger Rangers Fire Safety Curriculum in increasing the fire safety knowledge of low-income, minority children in pre-kindergarten to third grade in Austin, TX during a summer day camp in 2007.^ Methods: Data was collected from child participants via teacher and researcher administered tests at pretest, posttest (immediately after the completion of the fire safety module), and at a 3 week follow-up to asses retention. In addition, a self-administered questionnaire was collected from parents pre- and post-intervention to assess home-related fire/burn risk factors. Paired t-tests were conducted using STATA 12.0 to evaluate pretest, posttest, and retention test mean scores as well as mean fire safety rules listed by grade group. McNemar's test was used to determine if there was a difference in fire-related risk factors as reported by the parents of the participants before and after the intervention. Only those who had paired data for the tests/surveys being compared were included in the analysis.^ Results: The first/second grade group and the third grade group scored significantly higher on fire safety knowledge on the posttest compared to the pretest (p<0.0001 for both groups). However, there was no significant change in knowledge scores for the pre-kindergarten to kindergarten group (p=0.14). Among the first/second grade group, knowledge levels did not significantly decline between the posttest and retention test (p=0.25). However, the third grade group had significantly lower fire safety knowledge scores on the retention test compared to the posttest (p<0.001). A similar increase was seen in the amount of fire safety rules listed after the intervention (p<0.0001 between pre and posttest for both the first/second grade and third grade groups), with no decline from the posttest to the retention test (p=0.50) for the first/second grade group, but a significant decline in the third grade group (p=0.001). McNemar's chi-square test showed a significant increase in the percentage of participants' parents reporting smoke detector testing on a regular basis and having a fire escape plan for their family after the intervention (p=0.01 and p<0.0001, respectively). However, there was no significant change in the frequency of reports of the child playing in the kitchen while the parent cooks or the house/apartment having a working smoke detector.^ Conclusion: We found that general fire safety knowledge improved and the number of specific fire safety rules increased among the first to third grade children who participated in the Danger Rangers fire safety program. However, it did not significantly increase general fire safety knowledge among the pre-k/k group. This study also showed that a program targeted towards children has the potential to influence familial risk factors by proxy. The Danger Rangers Fire Safety Curriculum should be further evaluated by conducting a randomized controlled trial, using valid measures that assess fire safety attitudes, beliefs, behaviors, as well as fire/burn related outcomes.^

Fluid physics under reduced gravity : an overview

Problems related to several fluid physics experiments the case of two experiemnts to be performed under reduced gravity, onboard Space- temperatures,lab (1st Mission), are discussed. Special attention is placed on parallel and preparatory work on erth, wich could throw some light on the opportunity, present interest and limitations of these experiments. The need for strong supporting fundamental research and, in particular, a more precise determination of the paremeters involved, is stressed.

Improvements in transportation fire safety data bases. Final report.

Transportation Department, Office of the Assistant Secretary for Policy and International Affairs, Washington, D.C.

Commonalities in transportation fire safety: regulations, research and development, and data bases. Final report.

Transportation Department, Office of Environment and Safety, Washington, D.C.

Assessment of current U.S. Department of Transportation fire safety efforts.

Urban Mass Transportation Administration, Washington, D.C.