Assaying and metallurgical analysis for the use of students, chemists, and assayers.

Mode of access: Internet.

Aspectos metalúrgicos de revestimentos em dutos depositados com a superliga de níquel ERNiCrMo-4 pelos processos MIG convencional e MIG com adição de arame frio

Este trabalho estuda o perfil metalúrgico de revestimentos em dutos depositados pelos processos MIG C e MIG AF. A indústria petroquímica, e outras que utilizam dutos como meio de transporte de seus insumos, depara-se com um grande desafio: como aumentar a vida útil desses dutos em um ambiente severo de trabalho. No caso específico da petroquímica, os dutos servem como meio de transporte para petróleo e gás, que são produtos extremamente agressivos às paredes internas desses tubos que sofrem degradação por corrosão causada, principalmente, pela composição química, pressão e temperatura desses produtos. Nesse contexto a soldagem de revestimentos realizada com ligas à base de Níquel, torna-se uma excelente opção para a construção, reparo e manutenção de equipamentos cuja aplicação seja voltada a ambientes severos de trabalho, tornando possível aperfeiçoar as características requeridas, como por exemplo, a resistência à corrosão. É nesse cenário que surge o mote para a realização desta pesquisa, baseada em trabalhos que indicam que o processo de soldagem MIG/MAG com o da adição de arame frio possui a finalidade de avaliar as características metalúrgicas do revestimento em dutos depositados pelo processo derivativo MIG convencional – MIG-C e MIG com adição de arame frio – MIG AF – utilizando a liga de Níquel ERNiCrMo-4 em dutos de aço carbono. As soldas foram depositadas em dutos de diâmetro de 228,6 mm, formando uma camada de revestimento interno de quatro passes, divididos em três segmentos da circunferência do duto, em três diferentes energias de soldagem: 1,1; 0,9 e 0,7 kJ/mm. Desses segmentos retiraram-se corpos de prova dos dutos para a produção das amostras. Após a metalografia, realizada nas amostras, seguiu-se com a análise e caracterização ao microscópio óptico, microscópio eletrônico de varredura e ensaio de microdureza. Os revestimentos apresentaram excelente qualidade superficial para todos os pacotes operacionais aplicados na obtenção das soldas. As análises das regiões estudadas: metal de base; zona parcialmente misturada e zona termicamente afetada, mostraram-se compatíveis com os da literatura estudada, tanto para o MIG com adição de arame frio, quanto para o convencional. Na ZTA, foram observados valores de Tungstênio em torno de 1,0%, o aumento dos níveis de dureza foi creditado a esse fato. Os resultados de microdureza indicaram que para ambos os casos, MIG C e MIG AF, nas 4 regiões analisadas ocorreram de maneira semelhante, sendo a região da ZTA a que apresentou maiores valores na faixa de 400 a 500 HV, enquanto que nas demais regiões a faixa ficou entre 250 a 350 HV. Os resultados indicam que o processo com arame frio, MIG AF, mostrou-se tão eficiente quanto o convencional, MIG C. A energia de soldagem aumentou a diluição de Fe no metal de solda. Precipitados ricos em Mo e Cr foram encontrados no metal de solda.

Grand Junction operations office analytical laboratory handbook of analytical methods /

"A.E.C. Contract AT(05-1)-636."

Geochemical analysis of sediments from a polluted waterway in the vicinity of a metallurgical plant, Minas Gerais, Brazil

Mining and metallurgical industries are the most responsible for heavy metal contamination. These contaminants are often associated to poor management strategies and the lack of suitable containment areas. This is the case of one of the largest metal alloy producers in the São Francisco river basin, in Minas Gerais state, Brazil. During operation, the tailings of this activity have been accumulated in the surrounding area, leading to heavy metal contamination (Mn, Cu, Zn, Ni, Pb, Cd, Cr and As), much above the critical levels, which accumulate in the sediments of the nearby waterways, in the soils of the drainage area, and in the water column. In this work we are going to discuss both the contamination level and its extent in the Consciência river, a small tributary of the São Francisco river, the longest river entirely Brazilian, by analyzing the geochemistry and mineralogy of the accumulated sediments. It will be also discuss the reclamation strategies of this site and the impact on the environment.

Chemical analysis of powdered metallurgical slags by X-ray fluorescence spectrometry

Slag composition determines the physical and chemical properties as well as the application performance of molten oxide mixtures. Therefore, it is necessary to establish a routine instrumental technique to produce accurate and precise analytical results for better process and production control. In the present paper, a multi-component analysis technique of powdered metallurgical slag samples by X-ray Fluorescence Spectrometer (XRFS) has been demonstrated. This technique provides rapid and accurate results, with minimum sample preparation. It eliminates the requirement for a fused disc, using briquetted samples protected by a layer of Borax(R). While the use of theoretical alpha coefficients has allowed accurate calibrations to be made using fewer standard samples, the application of pseudo-Voight function to curve fitting makes it possible to resolve overlapped peaks in X-ray spectra that cannot be physically separated. The analytical results of both certified reference materials and industrial slag samples measured using the present technique are comparable to those of the same samples obtained by conventional fused disc measurements.

Use of CaC12 as a chlorinating agent for oxides - A thermodynamic analysis

Presented is a thermodynamic feasibility analysis of extracting base metal chlorides fiom low-grade,multimetallic oxide ores using CaClz as a chlorinating agent in the presence of SOz undoz. The oxides react to form corresponding chlorides, while CaClz is converted to CaS04. The Ellingham diagram is usedfor comparing the standard Gibbs' fiee energy chanlpef or the su(fation-chlorinationr eaction of a large number of oxides. Except for alumina, silica and chromia, most of the other metal oxides will be converted to their respective chlorides. The volatile chlorides can be condensed, and the chlorides present in the condensed state can be leached. A process is proposed that uses a nontoxic chlorinating agent and gives an eficient sepurutiort cftlte metallic vuluesfr.om the garlgue.

Boundary Element Method (BEM) Analysis for Galvanic Corrosion of Hot Dip Galvanized Steel Immersed in Seawater

A numerical analysis of galvanic corrosion of hot-dip galvanized steel immersed in seawater was presented. The analysis was based on the boundary element methods (BEMs) coupled with Newton-Raphson iterative technique to treat the nonlinear boundary conditions, which were determined by the experimental polarization curves. Results showed that galvanic current density concentrates on the boundary of steel substrate and zinc coating, and the sacrificial protection of zinc coating to steel substrate results in overprotection of steel cathode. Not only oxygen reduction but also hydrogen reduction could occur as cathode reactions, which probably led up to the adsorption and absorption of hydrogen atoms. Flat galvanized steel tensile sample shows a brittle behavior similar to hydrogen embrittlement according to the SSRT (show strain rate test) in seawater.

Prediction of marine sediment corrosion by fuzzy clustering analysis

Along with the development of marine industries, especially marine petroleum exploitation, more and more pipelines are buried in the marine sediment. It is necessary and useful to know the corrosion environment and corrosiveness of marine sediment. In this paper, field corrosion environmental factors were investigated in Liaodong Bay marine sediment containing sulfate-reducing bacteria (SRB) and corrosion rate of steel in the partly sediment specimens were determined by the transplanting burying method. Based on the data, the fuzzy clustering analysis (FCA) was applied to evaluate and predict the corrosiveness of marine sediment. On that basis, the influence factors of corrosion damage were discussed.

Grey interrelation analysis to assess the influence of elements on the galvanic efficiency of Al sacrificial anode

Grey interrelation analysis method was used to study the correlation of Al-anode elements and its galvanic efficiency at 20 degreesC, 40 degreesC and 60 degreesC. Twenty-eight kinds of Al-anodes were made for experiments by the method given by Chinese National Standard GB4948-85 [1] and the correlation degree of elements added in the anodes were calculated. The results showed that the order of elements affecting galvanic efficiency at different temperature is basically the same, and the correlation degree can reflect the variation of Al-anode galvanic efficiency when changing temperature. It is suggested that the elements being added in Al-anode are Zn, In, Ga, Mg.

Acqusition and data analysis of the eco-efficiency for the establishment of indicators parameters for industrial environmental sustainability

The industrial activity is inevitably associated with a certain degradation of the environmental quality, because is not possible to guarantee that a manufacturing process can be totally innocuous. The eco-efficiency concept is globally accepted as a philosophy of entreprise management, that encourages the companies to become more competitive, innovative and environmentally responsible by promoting the link between its companies objectives for excellence and its objectives of environmental excellence issues. This link imposes the creation of an organizational methodology where the performance of the company is concordant with the sustainable development. The main propose of this project is to apply the concept of eco-efficiency to the particular case of the metallurgical and metal workshop industries through the development of the particular indicators needed and to produce a manual of procedures for implementation of the accurate solution.

First order reversal curve analysis of nanocrystalline Pd(80)Co(20) alloy films

Films of isotropic nanocrystalline Pd(80)Co(20) alloys were obtained by electrodeposition onto brass substrate in plating baths maintained at different pH values. Increasing the pH of the plating bath led to an increase in mean grain size without inducing significant changes in the composition of the alloy. The magnetocrystalline anisotropy constant was estimated and the value was of the same order of magnitude as that reported for samples with perpendicular magnetic anisotropy. First order reversal curve (FORC) analysis revealed the presence of an important component of reversible magnetization. Also, FORC diagrams obtained at different sweep rate of the applied magnetic field, revealed that this reversible component is strongly affected by kinetic effect. The slight bias observed in the irreversible part of the FORC distribution suggested the dominance of magnetizing intergrain exchange coupling over demagnetizing dipolar interactions and microstructural disorder. (c) 2009 Elsevier B.V. All rights reserved.

A metallurgical study of aluminium alloys used as aircraft components

The effects of heat treatment on morphologies and microstructures of Al 2024 and Al 7050 alloys, used as aircraft components, were studied by metallographic techniques. Light microscopy (LM) and quantitative image analysis were used to characterize the precipitate dispersion and morphology for these alloys. The application of the scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) combined techniques for studying these multiphase systems makes it possible to distinguish and quantify the different phases in the surface structure. Xray diffraction also permitted a qualitative comparison of the structures before and after heat treatments.

Copper ore type definition from Sossego Mine using X-ray diffraction and cluster analysis technique

This paper presents the classification of 110 copper ore samples from Sossego Mine, based on X-ray diffraction and cluster analysis. The comparison based on the position and the intensity of the diffracted peaks allowed the distinction of seven ore types, whose differences refer to the proportion of major minerals: quartz, feldspar, actinolite, iron oxides, mica and chlorite. There was a strong correlation between the grouping and the location of the samples in Sequeirinho and Sossego orebodies. This relationship is due to different types and intensities of hydrothermal alteration prevailing in each body, which reflect the mineralogical composition and thus the X-ray diffractograms of samples.