997 resultados para Mechanical judicial cause
Resumo:
The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise
Resumo:
Die freien Endigungen von Spinalganglienneuronen sind für die Detektion schmerzhafter Reize verantwortlich. Dabei rufen thermische, chemische oder mechanische Reize Ionenströme über die Membran und dadurch Membranpotentialänderungen hervor. Diese noxisch induzierten Ströme sind in großem Ausmaß durch chemische Substanzen und andere Reize modulierbar. Der Ionenkanal TRPV1 ist für die Detektion zahlreicher chemischer Reize und zumindest eines Teils der noxischen Hitzereize verantwortlich. Im Rahmen dieser Arbeit wurden einige der Mechanismen geklärt, die zur schnellen Sensibilisierung hitzeevozierter Ionenströme führen. Hierfür wurden akut dissoziierte Spinalganglienneurone der Ratte als Modell ihrer peripheren Endigung verwendet und mittels Ganzzellableitung in der patch-clamp-Technik untersucht. Die Verwendung von Trypsin während der Präparation von Spinalganglienneuronen hat keinen funktionellen Einfluss auf hitze- oder capsaicininduzierte Ströme, verbessert aber die Untersuchungsbedingungen für das patch-clamp-Verfahren. Bei 144 akut dissoziierten Spinalganglienneuronen wurden die Stromantworten auf drei im Abstand von 40 s durch Überspülen mit 45,3 bis 46,3°C heißer Extrazellularlösung applizierte einsekündige Hitzereize gemessen. Dabei ließen sich repetitiv reproduzierbare hitzeinduzierte Einwärtsströme von etwa 160 pA erzielen; es konnte keine Tachyphylaxie und nahezu keine Inaktivierung beobachtet werden. Direkt vor dem zweiten Hitzereiz wurden die Neurone für zwei Sekunden mit Extrazellularlösung überspült, die Kontrolllösung, 0,5 μM Capsaicin, 10 μM Natriumnitroprussid oder 10 μM YC-1 enthielt. Es fand sich kein Hinweis, dass Stickstoffmonoxid oder die Guanylatzyklase einen signifikanten Beitrag zur Sensibilisierung von hitzeinduzierten Strömen in Spinalganglienneuronen leisten, wobei ein durch den Versuchsaufbau bedingtes Auswaschen zytosolischer Faktoren, die für den Signalweg notwendig sind, nicht ausgeschlossen werden kann. Bei einer Konzentration von 0,5 μM löst Capsaicin für zwei Sekunden einen sehr kleinen Einwärtsstrom von etwa 33 pA aus und führt innerhalb von zwei Sekunden zu einer schnell reversiblen Sensibilisierung von hitzeinduzierten Einwärtsströmen in Spinalganglienneuronen (p<0,01). Das Ausmaß der Sensibilisierung ist proportional zur Größe des capsaicininduzierten Stromes (r=−0,7, p<0,001). Konstant halten der intrazellulären Calciumkonzentration mittels des Calciumchelators BAPTA verhindert die capsaicininduzierte Sensibilisierung hitzeinduzierter Ströme an Spinalganglienneuronen. Demzufolge beruht die capsaicininduzierte Sensibilisierung trotz der schnellen Kinetik nicht auf einer synergistischen Wirkung der beiden Agonisten Capsaicin und Hitze auf ihren gemeinsamen Rezeptor; vielmehr ist sie von einer Erhöhung der intrazellulären freien Calciumkonzentration abhängig. Funktionelle Änderungen der zellulären Funktion werden häufig durch Proteinkinasen vermittelt. Die zur Gruppe der MAP-Kinasen gehörende ERK (extracellular signal related kinase) wird bei Membrandepolarisation und Calciumeinstrom in die Zelle durch MEK (MAPK/extracellular signal related kinase kinase) aktiviert. Blockade der MEK/ERK-Kaskade durch den spezifischen MEK-Hemmstoff U0126 führt ebenfalls zu einer Aufhebung der Sensibilisierung der Hitzeantworten durch Capsaicin. Applikation von Capsaicin führt innerhalb von zwei Sekunden zu einer schnell reversiblen Sensibilisierung hitzeevozierter Ionenströme an nozizeptiven Spinalganglienneuronen. Diese Sensibilisierung wird durch einen Calciumeinstrom in die Zelle und die dadurch eintretende Aktivierung von Proteinkinasen hervorgerufen. Die MEK/ERK-Kaskade ist ein sehr schnell (deutlich unter 2 s) aktivierbares intrazelluläres Signalsystem, welches bei der Regulation der Empfindlichkeit nozizeptiver Spinalganglienneurone eine entscheidende Rolle spielt; die schnelle Kinetik ist dabei nur durch eine membranständige oder zumindest membrannahe Lokalisation dieser Proteinkinasen erklärbar. Durch Applikation zehnsekündiger Hitzereize lässt sich ebenfalls eine Sensibilisierung hitzeevozierter Ionenströme auslösen, die ebenso ausgeprägt ist, wie die Sensibilisierung durch 0,5 μM Capsaicin (p<0,005). Durch das immer größere Verständnis der Funktionsweise des nozizeptiven Systems ergeben sich ständig neue Ansätze für die Entwicklung neuer Analgetika. So könnte durch Modulation spezifischer intrazellulärer Proteinkinasen der Phosphorylierungszustand und damit die Aktivierbarkeit von Ionenkanälen, die der Transduktion noxischer Reize dienen, positiv beeinflusst werden. Neuere, noch spezifischere Inhibitoren der MEK können der Forschung und später auch der Therapie neue Möglichkeiten eröffnen.
Resumo:
Exacerbated sensitivity to mechanical stimuli that are normally innocuous or mildly painful (mechanical allodynia and hyperalgesia) occurs during inflammation and underlies painful diseases. Proteases that are generated during inflammation and disease cleave protease-activated receptor 2 (PAR2) on afferent nerves to cause mechanical hyperalgesia in the skin and intestine by unknown mechanisms. We hypothesized that PAR2-mediated mechanical hyperalgesia requires sensitization of the ion channel transient receptor potential vanilloid 4 (TRPV4). Immunoreactive TRPV4 was coexpressed by rat dorsal root ganglia (DRG) neurons with PAR2, substance P (SP) and calcitonin gene-related peptide (CGRP), mediators of pain transmission. In PAR2-expressing cell lines that either naturally expressed TRPV4 (bronchial epithelial cells) or that were transfected to express TRPV4 (HEK cells), pretreatment with a PAR2 agonist enhanced Ca2+ and current responses to the TRPV4 agonists phorbol ester 4alpha-phorbol 12,13-didecanoate (4alphaPDD) and hypotonic solutions. PAR2-agonist similarly sensitized TRPV4 Ca2+ signals and currents in DRG neurons. Antagonists of phospholipase Cbeta and protein kinases A, C and D inhibited PAR2-induced sensitization of TRPV4 Ca2+ signals and currents. 4alphaPDD and hypotonic solutions stimulated SP and CGRP release from dorsal horn of rat spinal cord, and pretreatment with PAR2 agonist sensitized TRPV4-dependent peptide release. Intraplantar injection of PAR2 agonist caused mechanical hyperalgesia in mice and sensitized pain responses to the TRPV4 agonists 4alphaPDD and hypotonic solutions. Deletion of TRPV4 prevented PAR2 agonist-induced mechanical hyperalgesia and sensitization. This novel mechanism, by which PAR2 activates a second messenger to sensitize TRPV4-dependent release of nociceptive peptides and induce mechanical hyperalgesia, may underlie inflammatory hyperalgesia in diseases where proteases are activated and released.
Resumo:
This study evaluated the effect of the systemic use of sodium alendronate in rats in vivo. Forty-five Wistar rats aged 36 to 42 days and weighing 200 to 230 g were randomly assigned to a control group (n = 20), which received distilled water, and an experimental group (n = 25), which received 2 weekly doses of 1 mg/kg of chemically pure sodium alendronate. The animals were killed after 60 days of treatment. The tibias were removed for analysis of bone mineral density by dual-energy X-ray absorptiometry (DXA). Then, the maxillary incisors were extracted for analysis of the mineralized dental tissues using fluorescence spectroscopy (FS), scanning electron microscopy (SEM), bright field microscopy (BFM), and cross-sectional microhardness (CSMH) testing. DXA and CSMH data were subjected to statistical analysis by Kruskal-Wallis test (5% significance level). The experimental group presented higher bone mineral density than the control group by DXA. FS analysis revealed presence of alendronate in the mineralized dental tissues of the specimens of the experimental group. Significant morphological differences were not found by SEM and BFM. Enamel and dentin (100 and 300 mu m from the dentinoenamel junction) CSMH data did not show significant difference between the control and experimental groups. Based on the obtained results, we conclude that while alendronate increased the bone mineral density and was incorporated into the mineralized dental tissues it did not cause significant alterations in the morphology and microhardness of rat incisor enamel and dentin. Microsc. Res. Tech. 75:12651271, 2012. (C) 2012 Wiley Periodicals, Inc.
Resumo:
Outline of a plan proposed for the improvement of the existing law in all cases of insolvency.
Resumo:
Included in the original collection of the Starling Medical College.
Resumo:
Mode of access: Internet.
Resumo:
Mode of access: Internet.
Resumo:
Obesity is currently considered a major public health problem in the world, already reaching epidemic characteristics, according to the World Health Organization. Excess weight is the major risk factor associated with various diseases, such as type 2 diabetes mellitus, hypertension, dyslipidemia and osteometabolic diseases, including osteoporosis and osteoarthritis. Osteoarthritis is the most prevalent rheumatic disease and the leading cause of physical disability and reduced quality of life of the population over 65 years. It mainly involves the joints that bear weight - knees and hips. However, along with the cases of obesity, its prevalence is increasing, and even in other joints, such as hands. Thus, it is assumed that the influence of obesity on the development of OA is beyond mechanical overload. The purpose of this review was to correlate the possible mechanisms underlying the genesis and development of these two diseases. Increased fat mass is directly proportional to excessive consumption of saturated fatty acids, responsible for systemic low-grade inflammation condition and insulin and leptin resistance. At high levels, leptin assumes inflammatory characteristics and acts in the articular cartilage, triggering the inflammatory process and changing homeostasis this tissue with consequent degeneration. We conclude that obesity is a risk factor for osteoarthritis and that physical activity and changes in diet composition can reverse the inflammatory and leptin resistance, reducing progression or preventing the onset of osteoarthritis.
Resumo:
The inflation pressure of the endotracheal tube cuff can cause ischemia of the tracheal mucosa at high pressures; thus, it can cause important tracheal morbidity and tracheal microaspiration of the oropharyngeal secretion, or it can even cause pneumonia associated with mechanical ventilation if the pressure of the cuff is insufficient. In order to investigate the effectiveness of the RUSCH® 7.5 mm endotracheal tube cuff, this study was designed to investigate the physical and mechanical aspects of the cuff in contact with the trachea. For this end, we developed an in vitro experimental model to assess the flow of dye (methylene blue) by the inflated cuff on the wall of the artificial material. We also designed an in vivo study with 12 Large White pigs under endotracheal intubation. We instilled the same dye in the oral cavity of the animals, and we analyzed the presence or not of leakage in the trachea after the region of the cuff after their deaths (animal sacrifice). All cuffs were inflated at the pressure of 30 cmH2O. We observed the passage of fluids through the cuff in all in vitro and in vivo experimental models. We conclude that, as well as several other cuff models in the literature, the RUSCH® 7.5 mm tube cuffs are also not able to completely seal the trachea and thus prevent aspiration of oropharyngeal secretions. Other prevention measures should be taken.
Resumo:
This article reports the characteristics of blast furnace slag (BFS) pastes activated with hydrated lime (5%) and hydrated lime (2%) plus gypsum (6%) in relation to compressive strength, shrinkage (autogenous and drying) and microstructure (porosity, hydrated products). The paste mixtures were characterized using powder X-ray diffraction (XRD), mercury intrusion porosimetry (MIP) and thermogravimetric analysis (TG/DTG). BSF activated with lime and gypsum (LG) results in larger amounts of ettringite when compared with BFS activated with lime (L). Although the porosities of the L and LG mixtures were about the same, there was a greater pore refinement for the BFS activated with lime, with an increase in mesopores volume with age. The presence of ettringite and the higher volumes of macropores cause the compressive strength of BSF activated with hydrated lime plus gypsum to be smaller than that of BFS activated with lime. For both chemical activators, compressive strength developed slowly at early ages. Autogenous and drying shrinkage were greater for the BFS activated with lime, believed to result from the more refined porous structure in comparison with the mixture activated with gypsum plus lime. (c) 2010 Elsevier Ltd. All rights reserved.
Resumo:
Field collected flies were screened for the presence of rabbit haemorrhagic disease virus (RHDV) by applying reverse transcriptase PCR (RT-PCR) in which primers specific to the capsid protein of the virus were used. The virus was detected in flies from locations where rabbit haemorrhagic disease (RHD) was reported and also soon after the release of RHDV in a 'clean' area. Oral and/or anal excretions of flies (flyspots) were found to contain viable virus and oral inoculation of rabbits revealed that a single flyspot was able to cause RHD. We conclude that flyspots are a major potential source of the virus for oral or conjunctival transmission of the virus to rabbits. (C) 1998 Elsevier Science B.V. All rights reserved.
Resumo:
Addition of a load to a moving upper limb produces a perturbation of the trunk due to transmission of mechanical forces. This experiment investigated the postural response of the trunk muscles in relation to unexpected limb loading. Subjects performed rapid, bilateral shoulder flexion in response to a stimulus. In one third of trials, an unexpected load was added bilaterally to the upper limbs in the first third of the movement. Trunk muscle electromyography, intra-abdominal pressure and upper limb and trunk motion were measured. A short-latency response of the erector spinae and transversus abdominis muscles occurred similar to 50 ms after the onset of the limb perturbation that resulted from addition of the load early in the movement and was coincident with the onset of the observed perturbation at the trunk. The results provide evidence of initiation of a complex postural response of the trunk muscles that is consistent with mediation by afferent input from a site distant to the lumbar spine, which may include afferents of the upper limb.
Resumo:
Glucocorticoids are an important cause of secondary osteoporosis in humans, which decreases bone quality and leads to fractures. Mechanical stimulation in the form of low-intensity and high-frequency vibration seems to be able to prevent bone loss and to stimulate bone formation. The objective of this study was to evaluate the effects of mechanical vibration on bone structure in rats treated with glucocorticoids. Thirty 3-month-old adult male Wistar rats were randomized to three groups: control (C), glucocorticoid (G), and glucocorticoid with vibration (CV). The G and GV groups received 3.5 mg/kg/day of methylprednisolone 5 days/week for a duration of 9 weeks, and the C group received vehicle (saline solution) during the same period. The CV group was vibrated on a special platform for 30 min per day, 5 days per week during the experiment. The platform was set to provide a vertical acceleration of 1 G and a frequency of 60 Hz. Skeletal bone mass was evaluated by total body densitometry (DXA). Fracture load threshold, undecalcified bone histomorphometry, and bone volume were measured in tibias. Glucocorticoids induced a significantly lower weight gain (-9.7%) and reduced the bone mineral content (-9.2%) and trabecular number (-41.8%) and increased the trabecular spacing (+98.0%) in the G group, when compared to the control (C). Vibration (CV) was able to significantly preserve (29.2%) of the trabecular number and decrease the trabecular spacing (+ 26.6%) compared to the G group, although these parameters did not reach C group values. The fracture load threshold was not different between groups, but vibration significantly augmented the bone volume of the tibia by 21.4% in the CV group compared to the C group. Our study demonstrated that low-intensity and high-frequency mechanical vibration was able to partially inhibit the deleterious consequences of glucocorticoids on bone structure in rats. (C) 2010 Elsevier Inc. All rights reserved.