Acceleration Sensing, Feedback Cooling, and Nonlinear Dynamics with Nanoscale Cavity-Optomechanical Devices

Light has long been used for the precise measurement of moving bodies, but the burgeoning field of optomechanics is concerned with the interaction of light and matter in a regime where the typically weak radiation pressure force of light is able to push back on the moving object. This field began with the realization in the late 1960's that the momentum imparted by a recoiling photon on a mirror would place fundamental limits on the smallest measurable displacement of that mirror. This coupling between the frequency of light and the motion of a mechanical object does much more than simply add noise, however. It has been used to cool objects to their quantum ground state, demonstrate electromagnetically-induced-transparency, and modify the damping and spring constant of the resonator. Amazingly, these radiation pressure effects have now been demonstrated in systems ranging 18 orders of magnitude in mass (kg to fg).

In this work we will focus on three diverse experiments in three different optomechanical devices which span the fields of inertial sensors, closed-loop feedback, and nonlinear dynamics. The mechanical elements presented cover 6 orders of magnitude in mass (ng to fg), but they all employ nano-scale photonic crystals to trap light and resonantly enhance the light-matter interaction. In the first experiment we take advantage of the sub-femtometer displacement resolution of our photonic crystals to demonstrate a sensitive chip-scale optical accelerometer with a kHz-frequency mechanical resonator. This sensor has a noise density of approximately 10 micro-g/rt-Hz over a useable bandwidth of approximately 20 kHz and we demonstrate at least 50 dB of linear dynamic sensor range. We also discuss methods to further improve performance of this device by a factor of 10.

In the second experiment, we used a closed-loop measurement and feedback system to damp and cool a room-temperature MHz-frequency mechanical oscillator from a phonon occupation of 6.5 million down to just 66. At the time of the experiment, this represented a world-record result for the laser cooling of a macroscopic mechanical element without the aid of cryogenic pre-cooling. Furthermore, this closed-loop damping yields a high-resolution force sensor with a practical bandwidth of 200 kHZ and the method has applications to other optomechanical sensors.

The final experiment contains results from a GHz-frequency mechanical resonator in a regime where the nonlinearity of the radiation-pressure interaction dominates the system dynamics. In this device we show self-oscillations of the mechanical element that are driven by multi-photon-phonon scattering. Control of the system allows us to initialize the mechanical oscillator into a stable high-amplitude attractor which would otherwise be inaccessible. To provide context, we begin this work by first presenting an intuitive overview of optomechanical systems and then providing an extended discussion of the principles underlying the design and fabrication of our optomechanical devices.

Cavity Optomechanics at Millikelvin Temperatures

The field of cavity optomechanics, which concerns the coupling of a mechanical object's motion to the electromagnetic field of a high finesse cavity, allows for exquisitely sensitive measurements of mechanical motion, from large-scale gravitational wave detection to microscale accelerometers. Moreover, it provides a potential means to control and engineer the state of a macroscopic mechanical object at the quantum level, provided one can realize sufficiently strong interaction strengths relative to the ambient thermal noise. Recent experiments utilizing the optomechanical interaction to cool mechanical resonators to their motional quantum ground state allow for a variety of quantum engineering applications, including preparation of non-classical mechanical states and coherent optical to microwave conversion. Optomechanical crystals (OMCs), in which bandgaps for both optical and mechanical waves can be introduced through patterning of a material, provide one particularly attractive means for realizing strong interactions between high-frequency mechanical resonators and near-infrared light. Beyond the usual paradigm of cavity optomechanics involving isolated single mechanical elements, OMCs can also be fashioned into planar circuits for photons and phonons, and arrays of optomechanical elements can be interconnected via optical and acoustic waveguides. Such coupled OMC arrays have been proposed as a way to realize quantum optomechanical memories, nanomechanical circuits for continuous variable quantum information processing and phononic quantum networks, and as a platform for engineering and studying quantum many-body physics of optomechanical meta-materials.

However, while ground state occupancies (that is, average phonon occupancies less than one) have been achieved in OMC cavities utilizing laser cooling techniques, parasitic absorption and the concomitant degradation of the mechanical quality factor fundamentally limit this approach. On the other hand, the high mechanical frequency of these systems allows for the possibility of using a dilution refrigerator to simultaneously achieve low thermal occupancy and long mechanical coherence time by passively cooling the device to the millikelvin regime. This thesis describes efforts to realize the measurement of OMC cavities inside a dilution refrigerator, including the development of fridge-compatible optical coupling schemes and the characterization of the heating dynamics of the mechanical resonator at sub-kelvin temperatures.

We will begin by summarizing the theoretical framework used to describe cavity optomechanical systems, as well as a handful of the quantum applications envisioned for such devices. Then, we will present background on the design of the nanobeam OMC cavities used for this work, along with details of the design and characterization of tapered fiber couplers for optical coupling inside the fridge. Finally, we will present measurements of the devices at fridge base temperatures of T_f = 10 mK, using both heterodyne spectroscopy and time-resolved sideband photon counting, as well as detailed analysis of the prospects for future quantum applications based on the observed optically-induced heating.

Variable mixed-mode delamination in composite laminates under fatigue conditions: testing & analysis

La majoria de les fallades en elements estructurals són degudes a càrrega per fatiga. En conseqüència, la fatiga mecànica és un factor clau per al disseny d'elements mecànics. En el cas de materials compòsits laminats, el procés de fallada per fatiga inclou diferents mecanismes de dany que resulten en la degradació del material. Un dels mecanismes de dany més importants és la delaminació entre capes del laminat. En el cas de components aeronàutics, les plaques de composit estan exposades a impactes i les delaminacions apareixen facilment en un laminat després d'un impacte. Molts components fets de compòsit tenen formes corbes, superposició de capes i capes amb diferents orientacions que fan que la delaminació es propagui en un mode mixt que depen de la grandària de la delaminació. És a dir, les delaminacions generalment es propaguen en mode mixt variable. És per això que és important desenvolupar nous mètodes per caracteritzar el creixement subcrític en mode mixt per fatiga de les delaminacions. El principal objectiu d'aquest treball és la caracterització del creixement en mode mixt variable de les delaminacions en compòsits laminats per efecte de càrregues a fatiga. Amb aquest fi, es proposa un nou model per al creixement per fatiga de la delaminació en mode mixt. Contràriament als models ja existents, el model que es proposa es formula d'acord a la variació no-monotònica dels paràmetres de propagació amb el mode mixt observada en diferents resultats experimentals. A més, es du a terme un anàlisi de l'assaig mixed-mode end load split (MMELS), la característica més important del qual és la variació del mode mixt a mesura que la delaminació creix. Per a aquest anàlisi, es tenen em compte dos mètodes teòrics presents en la literatura. No obstant, les expressions resultants per l'assaig MMELS no són equivalents i les diferències entre els dos mètodes poden ser importants, fins a 50 vegades. Per aquest motiu, en aquest treball es porta a terme un anàlisi alternatiu més acurat del MMELS per tal d'establir una comparació. Aquest anàlisi alternatiu es basa en el mètode dels elements finits i virtual crack closure technique (VCCT). D'aquest anàlisi en resulten importants aspectes a considerar per a la bona caracterització de materials utilitzant l'assaig MMELS. Durant l'estudi s'ha dissenyat i construït un utillatge per l'assaig MMELS. Per a la caracterització experimental de la propagació per fatiga de delaminacions en mode mixt variable s'utilitzen diferents provetes de laminats carboni/epoxy essencialment unidireccionals. També es du a terme un anàlisi fractogràfic d'algunes de les superfícies de fractura per delaminació. Els resultats experimentals són comparats amb les prediccions del model proposat per la propagació per fatiga d'esquerdes interlaminars.

Sistema eletro-eletrônico para medição direta de torque em dispositivos girantes utilizando extensômetros de resistência elétrica

Neste trabalho propõe-se um sistema para medição de torque em dispositivos girantes, que utiliza extensômetros de resistência elétrica colados nos próprios elementos constituintes do arranjo mecânico sob análise. Um conjunto de circuitos eletrônicos foi especialmente desenvolvido para o sensoreamento das pequenas deformações que ocorrem nos disposotivos girantes. O sistema opera sem contato eletro-mecânico entre a parte estacionária e a parte girante. Para tanto desenvolveu-se também uma metodologia de projeto e construção de transformadores rotativos que são utilizados para transferência da energia que alimenta os circuitos eletrônicos solidários ao elemento mecânico instrumentado. Também foi necessário utilizar um transmissor em freqüência modulada do sinal elétrico proporcional ao torque medido. Uma análise comparativa, dos resultados obtidos entre os sistemas existentes e aqueles alcançados com a técnica proposta neste trabalho, demonstra sua aplicabilidade em diversas situações práticas.

Development of a prototype for measuring plantar forces

Studies on the distribution of plantar pressure between the sole of the foot and the ground were developed before the 19th century. Currently, the most often employed plantar pressure measurement systems are Pedar® and FScan®, which have restrictions such as operational difficulty and high cost. In the present study, a device was constructed from two pressure plates capable of measuring plantar forces in discreet areas of the feet at a low cost, using strain-gages attached to sixteen strategic points of the mechanical elements. Sixteen prismatic beams were soldered to each frame, for which the free extremity of each beam represented a specific point of the foot. Two strain gauges were attached to each beam - one near the upper fixed extremity and the other near the lower fixed extremity. Using a Wheatstone bridge electric circuit, the gauges were used to measure the force acting on the extremity of the beam. Precision and accuracy of the prototype was about 10%. In some measurements, accuracy was 2%. The low precision and accuracy were mainly due to the restrictions of the available equipment, which only permitted four measurements at a time. Thus, it was necessary for participants to stand on the plates four separate times, which signified possible changes in the position of the feet on the pressure plates. Despite some limitations, the aim was achieved. The prototype has been used in some studies and represents a contribution to biomechanics, demonstrating the viability of using strain gauges.

Uso de absorvedores de vibrações eletromecânicos lineares e não-lineares em sistemas não-lineares e não-ideais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos de descontinuidades na propagação de ondas em estruturas unidimensionais

Pós-graduação em Engenharia Mecânica - FEIS

Projeto e desenvolvimento de robô cartesiano de baixo custo para manipulação de produtos em linhas de média cadência

Pós-graduação em Engenharia Elétrica - FEB

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.

Methodologies for Designing and Developing New Concepts in Vertical Transportation

Escalator and moving walkway are multibody systems with a design of more than a century. Developed methodology allows studying and improving any subsystem of both systems. In addition, new concepts can be developed and tested without the necessity and cost of a real construction. CITEF (Railway Technologies Research Centre) has been modelling escalators for more than four years. Several complex and innovative models has been developed to characterize static, kinematic and dynamic escalator behaviour. The high number of mechanical elements that are part of escalators complicate modelling task. In this way, methodologies and tools have been developed in order to automate these task and saving computational and time costs. Developed methodologies have been validated with the results of comparing real measurements and simulated outputs from a dynamic model.

Antiguo Poblado de Algarrobito ubicado en el Valle del Elqui Chile, y su Patrón Urbano Bioclimático

La importancia de conocer bien el entorno para un proyecto arquitectónico es que podemos adaptarlo a nuestras necesidades fisiológicas de Confort Térmico. Podemos decir entonces que el edificio juega un papel fundamental como técnica de control de nuestro entorno. El edificio nos debería entregar un entorno controlado para que nos sintamos bien térmicamente, considerando además, que la arquitectura por sí misma puede lograr dicho confort la mayor parte de las veces. De no ser así, los usuarios tienden a colocar elementos mecánicos, para generar frío o calor artificialmente. Es fundamental entonces que nuestros edificios, tengan una correcta interacción con los recursos naturales del lugar para lograr dicho confort térmico. Pero lograr el Confort Térmico en todos los edificios de una ciudad como unidad, no logrará que la ciudad entera sea confortable térmicamente, ya que las complejas interacciones hacen que la problemática se deba enfrentar como algo sistémico. Esto quiere decir, que para que una ciudad o un conjunto logren la Confortabilidad Térmica deseada por sus habitantes debiera haber sido planificada conforme a variables urbanas que interactúen con el medio natural en forma eficiente. Con la observación de ciertos conjuntos habitacionales antiguos en el interior del Valle del Elqui, Chile y de sus relaciones entre variables urbanas y naturales, queda de manifiesto ciertas características que conllevan a pensar que existió una planificación ambiental en éstos que llevaron a lograr un conjunto con características bioclimáticas. Las evidencias de la existencia en primer lugar de un patrón urbanístico en dichos conjuntos habitacionales antiguos, hacen pensar que dicho patrón se trataría de un patrón bioclimático rural planificado, lo que hace que exista un gran interés por el estudio de estos conjuntos. Hasta ahora, en Chile, los pocos estudios de Confort Térmico que existen, están orientados a edificaciones aisladas, al Confort térmico interior de la edificación en el ámbito urbano, y en nada a Patrones Bioclimáticos de Conjuntos Habitacionales en una situación de ruralidad como a la referida en esta investigación. Además, los estudios referidos al clima urbano, difieren a los del clima rural, por lo que se necesitan mayores estudios aún para comprender mejor la problemática. Es por esto, que la mayoría de los casos mencionados en este estudio son contextualizados al ámbito urbano por carecer de otros estudios rurales. Es en este sentido que esta investigación cobra real importancia y pretende establecer la relación existente entre las variables morfológicas rurales y los recursos naturales del lugar y que generan un confort térmico ideal para sus habitantes, al mismo tiempo, se analiza la existencia de un Patrón Bioclimático en un poblado denominado Algarrobito ubicado en la cuenca del Valle del Elqui, Chile. Es en este sentido que el propósito principal de este trabajo es determinar la real existencia de un Patrón Bioclimático que relacione la morfología rural y edificada de los antiguos poblados pertenecientes a la cuenca del Valle de Elqui Chile con el microclima del lugar. La metodología empleada se basa en realizar primeramente el estudio del microclima del lugar a través de las Cartas Bioclimáticas. Para ello se obtuvo información de datos climatológicos de las estaciones meteorológicas ubicadas en la cuenca del Valle de Elqui, principalmente las más cercanas al lugar de estudio. Mediante una revisión exhaustiva de la información arquitectónica, así como de una labor de reconocimiento en terreno realizada en el poblado seleccionado y de la aplicación del Climograma local, se identificaron las diferentes zonas bioclimáticas del poblado antiguo y potenciales áreas de estudio en el conjunto. Esta actividad incluyó un estudio preliminar de la energía solar local, vientos, humedad, temperaturas y su interacción con el conjunto, permitiendo una primera aproximación a la problemática del espacio exterior y las viviendas. Esto permitió en base a las condicionantes del lugar, la arquitectura vernácula y los materiales descubrir un Patrón en el antiguo conjunto que permitía entregar confortabilidad térmica a sus habitantes y darse cuenta también, que el nuevo conjunto emplazado en el sector no seguía ese patrón con las disfuncionalidades que ello llevaba. Con esto quedó demostrado en primer lugar la existencia de un Patrón Bioclimático rural, los beneficios del patrón, la importancia de éste como causante de Confortabilidad Térmica del conjunto, y por ende de mejor eficiencia energética, así como también, que el nuevo conjunto no sigue para nada este Patrón, pero que existe también la posibilidad de rectificación y por supuesto, que los nuevos desarrollos residenciales del Valle del Elqui, puedan planificarse en base al patrón bioclimático descubierto. ABSTRACT Knowing the environment of an architectonic proyect is really important for adjusting it to our physiological needs of Thermal Comfort. So we can say that the building plays a key role as a technique of control of our environment. The building should give us a controlled environment to make us feel good thermally, and it usually can reach pleasurable temperatures by itself. If it isn't like that, people cooled or heated the ambience with mechanical elements. So a correct interaction between the buildings and natural resources is important to reach a thermal comfort. But achieving Thermal Comfort in all the buildings of a city as a unit will not achieve the whole city is thermally comfortable, because the complex interactions cause the problem needs to be solved as something systemic. This means that for a city or a set reach the Thermal Comfortability desired by its inhabitants, it should have been planned according to the urban variables that interact with the natural environment efficiently. Observing some old housing complexes in Elqui Valley, Chile, and the relationships between their natural and urban variables, some features lead to think that the environmental planning in these led to achieve a set with bioclimatic features. First, the evidences about the existence of an urban pattern in those old housing complexes, make thinking that the pattern would be a planned urban pattern, which generates interest in its study. In Chile, there have been few studies about Thermal Comfort, oriented to isolated buildings and indoor thermal comfort, but Bioclimatic Urban Patterns haven't been studied at all. In this sense, this investigation acquires a real importance and pretends to establish the relationship between urban variables and natural resources of the place that generates a good thermal comfort for its habitants. At the same time, the existence of a Bioclimatic Urban Pattern in Algarrobito, located in Elqui Valley basin, Chile, is analized. It is in this sense that the main purpose of this work is to determine the real existence of a Bioclimatic Urban Pattern, that links the urban and constructive form of the old villages of it with its microclimate. The methodology used is based on performing first the study of the microclimate of the place through the Bioclimatic Cards. To do this, weather stations, located in Elqui valley, near the place that was studied, were used to obtain information of climatological data. The different bioclimatic zones to the old town and potential areas of study in the set were identified, through an exhaustive review of the architectural information, a field reconnaissance work performed on the selected town and the application of the Local Climograph. This activity included a preliminary study of the local solar energy, the winds, the moisture, the temperatures, and their interaction with the set, allowing a first aproximation to troubles of outer space and housing. This allowed, based on the conditions of the place, vernacular architecture and materials, discovering an urban pattern in the old set, which allowed to give thermal comfort to its inhabitants and realize that the new set of the place did not follow this pattern, with the dysfunctions that it carried. These points demonstrated, in first place, the existence of a Bioclimatic Urban Pattern, the benefits of it, the importance of it as a cause of Thermal Comfortability, and therefore a better efficiency of energy, also that the new set doesn’t follow this Pattern at all, but that the posibility of rectification exists and, of course, that the new residencial development in Elqui Valley can be planned based on bioclimatic pattern discovered.

Studying the influence of substitutional elements on mechanical behavior of Alloy 718

In nickel-based superalloys, substitutional solute species have a strong impact on in service mechanical properties as well as on oxidation and corrosion resistances. In alloy 718, recent studies carried out by tensile tests highlighted the fact that refractory solute species are able to interact strongly with mobile dislocations during plastic deformation, generating dynamic strain ageing, and, in wide ranges of tests temperatures and strain rates, Portevin-Le Chatelier effect. The precise nature of the substitutional element responsible for such a dynamic interaction is still subject to debate. We addressed this question by means of mechanical spectroscopy studies of alloy 718 and various related alloys corresponding to monitored changes in the chemical composition. Only a single internal friction relaxation peak has been observed for all the studied alloys. By analyzing the damping behavior of these alloys at different imposed solicitation frequencies by sweeping a large temperatures range, the activation energies of the relaxation process and the type of mechanism involved have been determined. The process is a "Zener relaxation" in the alloys, i.e. a substitutional atoms dipole reorientation under applied stress. The results tend to prove that Niobium is not involved in the relaxation process whereas Molybdenum content seems to play an important role in the relaxation intensity.

Analysis of mechanical behavior in bending of polymer composites using the finite elements method

The use of composite materials has increased in the recent decades, mainly in the aeronautics and automotives industries. In the present study is elaborated a computational simulation program of the bending test using the finite elements method, in the commercial software ANSYS. This simulation has the objective of analyze the mechanical behavior in bending of two composites with polymeric matrix reinforced with carbon fibers. Also are realized bending tests of the 3 points to obtain the resistances of the materials. Data from simulation and tests are used to make a comparison between two failures criteria, Tsai-Wu and Hashin criterion. Copyright © 2009 SAE International.

Crack mechanical failure in lithium niobate crystal under ion irradiation; novel simulation by extended finite elements

Swift heavy ion irradiation (ions with mass heavier than 15 and energy exceeding MeV/amu) transfer their energy mainly to the electronic system with small momentum transfer per collision. Therefore, they produce linear regions (columnar nano-tracks) around the straight ion trajectory, with marked modifications with respect to the virgin material, e.g., phase transition, amorphization, compaction, changes in physical or chemical properties. In the case of crystalline materials the most distinctive feature of swift heavy ion irradiation is the production of amorphous tracks embedded in the crystal. Lithium niobate is a relevant optical material that presents birefringence due to its anysotropic trigonal structure. The amorphous phase is certainly isotropic. In addition, its refractive index exhibits high contrast with those of the crystalline phase. This allows one to fabricate waveguides by swift ion irradiation with important technological relevance. From the mechanical point of view, the inclusion of an amorphous nano-track (with a density 15% lower than that of the crystal) leads to the generation of important stress/strain fields around the track. Eventually these fields are the origin of crack formation with fatal consequences for the integrity of the samples and the viability of the method for nano-track formation. For certain crystal cuts (X and Y), these fields are clearly anisotropic due to the crystal anisotropy. We have used finite element methods to calculate the stress/strain fields that appear around the ion-generated amorphous nano-tracks for a variety of ion energies and doses. A very remarkable feature for X cut-samples is that the maximum shear stress appears on preferential planes that form +/-45º with respect to the crystallographic planes. This leads to the generation of oriented surface cracks when the dose increases. The growth of the cracks along the anisotropic crystal has been studied by means of novel extended finite element methods, which include cracks as discontinuities. In this way we can study how the length and depth of a crack evolves as function of the ion dose. In this work we will show how the simulations compare with experiments and their application in materials modification by ion irradiation.

Mechanical alloying of MoSi2 with ternary alloying elements. Part 1: Experimental

Phase evolution during the mechanical alloying of Mo and Si elemental powders with a ternary addition of Al, Mg, Ti or Zr was monitored using X-ray diffraction. Rietveld analysis was used to quantify the phase proportions. When Mo and Si are mechanically alloyed in the absence of a ternary element, the tetragonal C11b polymorph of MoSi2 (t-MoSi2) forms by a self-propagating combustion reaction. With additional milling, the tetragonal phase transforms to the hexagonal C40 structure (h-MoSi2). The mechanical alloying of Al, Mg and Ti additions with Mo and Si tend to promote a more rapid transformation of t-MoSi2 to h-MoSi2. In high concentrations, the addition of these ternary elements inhibits the initial combustion reaction, instead promoting the direct formation of h-MoSi2. The addition of Zr tends to stabilise the tetragonal phase.