Experiences of Organising the Master of Science Programme in Packaging Technology

Organising the PT- programme for full-time working adult students is a challenging task as it is an international programme with both domestic and foreign students with different educational background. The purpose of this project work is to provide both student and lecturer feedback for improving Master Of Science Degree Programme in Packaging Technology to meet better the requirements of part-time studying. The objective of this work is in accordance with the Lappeenranta University of Technology’s strategy to improve continuously degree programmes and courses and to use student feedback in this development work of education. Matters, such as lecture schemes, distance material distribution, distance assignment handling, course assessments, and guidance of thesis work will be under scrutiny.

A Comparative Study of the Information-Seeking Behavior of Bachelor of Science and Master of Science Agricultural Extension and Education Students

This study compares information-seeking behavior of Bachelor of Science and Master of Science students in the fields of agricultural extension and education. The authors surveyed Iranian students in departments of agricultural extension and education at four universities in Tehran, Shiraz, Mollasani, and Kermanshah. This study focused on three aspects: (1) comparison of amounts of information-seeking behavior between Bachelor of Science and Master of Science agricultural extension and education students; (2) comparison of information-seeking behavior varieties in Bachelor of Science and Master of Science agricultural extension and education students; (3) Comparison of amounts of available information resources at four universities and its effectiveness on students' information-seeking behavior; and (4) comparison of research and educational outputs in Bachelor of Science and Master of Science students. Scale free technique, division by mean method, principal components analysis technique, Delphi method, t-test, correlation and regression tools were used for data analysis. This study revealed that Bachelor of Science students' information-seeking behavior is for improving educational output, but Master of Science students' information-seeking behavior is for promoting research output. Among varieties of Internet searching skills, library searching skills, and awareness of library information-seeking methods with students' information-seeking behavior, there are not significant differences between two groups of students.

Stock assessment for fishery management - A framework guide to the stock assessment tools of the Fisheries Management Science Programme (FMSP)

This document provides guidelines for fish stock assessment and fishery management using the software tools and other outputs developed by the United Kingdom's Department for International Development's Fisheries Management Science Programme (FMSP) from 1992 to 2004. It explains some key elements of the precautionary approach to fisheries management and outlines a range of alternative stock assessment approaches that can provide the information needed for such precautionary management. Four FMSP software tools, LFDA (Length Frequency Data Analysis), CEDA (Catch Effort Data Analysis), YIELD and ParFish (Participatory Fisheries Stock Assessment), are described with which intermediary parameters, performance indicators and reference points may be estimated. The document also contains examples of the assessment and management of multispecies fisheries, the use of Bayesian methodologies, the use of empirical modelling approaches for estimating yields and in analysing fishery systems, and the assessment and management of inland fisheries. It also provides a comparison of length- and age-based stock assessment methods. A CD-ROM with the FMSP software packages CEDA, LFDA, YIELD and ParFish is included.

Causes and consequences of low rates of specialisation in science and technology in CDCC member countries

The importance of science and technology (S&T) in Small Island Developing States (SIDS) is clearly articulated in Chapter XI, paragraphs 57, 58, 61 and 62 of the Mauritius Strategy for the Further Implementation of the Programme of Action for Sustainable Development of Small Island Developing States (MSI). At the regional level, the Heads of Government of the Caribbean Community (CARICOM) noted the challenge that CARICOM member States face in competing in this new international economic environment in which the impact of scientific and technological change has created a knowledge-based global economy. Given the importance of S&T to development of Caribbean SIDS, the Economic Commission for Latin America and the Caribbean (ECLAC) Subregional Headquarters for the Caribbean embarked on a study to determine the causes and consequences of low rates of specialisation in S&T with a view to making recommendations for development of strategies for addressing these challenges. Data on postgraduate (Master of Science, Master of Philosophy and Doctor of Philosophy) enrolment and graduation in agriculture, engineering and the sciences from the three campuses of the University of the West Indies (UWI) as well as from the University of Technology in Jamaica and the University of Trinidad and Tobago (UTT) were examined and analysed. Face-to-face interviews were also held with key personnel from these institutions and a questionnaire was also served to individuals in key institutions. Results of the study revealed that although the number of students enrolled in higher degree programmes has increased in absolute terms, they are decreasing in relative terms. However, enrolment in agriculture has indeed declined while enrolment rates in engineering, although increasing, were not significantly high. Market forces have proved to be a main reason for this trend while facilities for the conduct and supervision of cutting-edge research, the disconnect between science and industry and societal labelling of scientists as “misfits” are also contributing to the situation. This has resulted in a reduced desire by students at all levels of the school system and faculty to be involved in S&T; lack of innovation; a better staffed private, as compared with public, sector; and poor remuneration in science-based employment. There also appears to be a gender bias in enrolment with more males than females being enrolled in engineering while the opposite is apparent in agriculture and the sciences. Recommendations for remedying this situation range from increasing investment in S&T, creating linkages between science and industry as well as with the international community, raising awareness of the value of S&T at all levels of the education system to informing policy to stimulate the science – innovation interface so as to promote intellectual property rights.

The Stock of science and engineering master's degree-holders in the United States.

Includes bibliographical references.

The stock of science and engineering master's degree-holders in the United States /

Includes bibliographical references.

A teaching-learning sequence of colour informed by history and philosophy of science

In this work, we present a teaching-learning sequence on colour intended to a pre-service elementary teacher programme informed by History and Philosophy of Science. Working in a socio-constructivist framework, we made an excursion on the history of colour. Our excursion through history of colour, as well as the reported misconception on colour helps us to inform the constructions of the teaching-learning sequence. We apply a questionnaire both before and after each of the two cycles of action-research in order to assess students’ knowledge evolution on colour and to evaluate our teaching-learning sequence. Finally, we present a discussion on the persistence of deep-rooted alternative conceptions.

Optimising the design and manufacture of a customised, prescription fit, Maxillo-facial prosthesis

This thesis is a continuation of the Enterprise-Ireland Research Innovation Fund (RIF) Project entitled’ "Design and Manufacturing of Customised Maxillo-Facial Prostheses" The primary objective of this Internal Research Development Program (IRDP) project was to investigate two fundamental design changes 1 To incorporate the over-denture abutments directly into the implant. 2 To remove the restraining wings by the addition of screws, which affix the. implant to the dense material of the jawbone. The prosthetic was redesigned using the ANSYS Finite Element Analysis software program and analysed to* • Reduce the internal von Mises stress distribution The new prosthetic had a -63.63 % lower von Mises stress distribution when compared with the original prosthetic. • Examine the screw preload effects. A maximum relative displacement of 22 6 * lO^mm between the bone and screw was determined, which is well below the critical threshold of micromotion which prevents osseointegration • Investigate the prosthetic-bone contact interface. Three models of the screw, prosthesis, and bone, were studied. (Axisymmetnc, quarter volume, and full volume), a recommended preload torque of 0 32 Nm was applied to the prosthetic and a maximum von Mises stress of 1.988 MPa was predicted • Study the overdenture removal forces. This analysis could not be completed because the correct plastic multilinear properties of the denture material could not be established The redesigned prosthetic was successfully manufactured on a 3-axis milling machine with an indexing system The prosthetic was examined for dimensional quality and strength The research established the feasibility of the new design and associated manufacturing method.

Science education and popularization of science in the biomedical area: its role for the future of science and of society

This paper presents the main subjects discussed in the round-table: "Educational Base for Biomedical Research", during the International Symposium on Biomedical Research in the 21st century; two main aspects will be focused: (1) the importance of popularizing science in order to stimulate comprehension of the scientific process and progress, their critical thinking, citizenship and social commitment, mainly in the biomedical area, considering the new advances of knowledge and the resulting technology; (2) the importance to stimulate genuine scientific vocation among young people, by giving them opportunity to early experience scientific environment, throught the hands of well prepared master in a humanistic atmosphere.

EPA's Council for Regulatory Environmental Modeling : a case study of science policy implementation

As environmental problems became more complex, policy and regulatory decisions become far more difficult to make. The use of science has become an important practice in the decision making process of many federal agencies. Many different types of scientific information are used to make decisions within the EPA, with computer models becoming especially important. Environmental models are used throughout the EPA in a variety of contexts and their predictive capacity has become highly valued in decision making. The main focus of this research is to examine the EPA’s Council for Regulatory Modeling (CREM) as a case study in addressing science issues, particularly models, in government agencies. Specifically, the goal was to answer the following questions: What is the history of the CREM and how can this information shed light on the process of science policy implementation? What were the goals of implementing the CREM? Were these goals reached and how have they changed? What have been the impediments that the CREM has faced and why did these impediments occur? The three main sources of information for this research came from observations during summer employment with the CREM, document review and supplemental interviews with CREM participants and other members of the modeling community. Examining a history of modeling at the EPA, as well as a history of the CREM, provides insight into the many challenges that are faced when implementing science policy and science policy programs. After examining the many impediments that the CREM has faced in implementing modeling policies, it was clear that the impediments fall into two separate categories, classic and paradoxical. The classic impediments include the more standard impediments to science policy implementation that might be found in any regulatory environment, such as lack of resources and changes in administration. Paradoxical impediments are cyclical in nature, with no clear solution, such as balancing top-down versus bottom-up initiatives and coping with differing perceptions. These impediments, when not properly addressed, severely hinder the ability for organizations to successfully implement science policy.

Looking at the effectiveness of an earth science unit designed using the Understanding by Design process

This report shares my efforts in developing a solid unit of instruction that has a clear focus on student outcomes. I have been a teacher for 20 years and have been writing and revising curricula for much of that time. However, most has been developed without the benefit of current research on how students learn and did not focus on what and how students are learning. My journey as a teacher has involved a lot of trial and error. My traditional method of teaching is to look at the benchmarks (now content expectations) to see what needs to be covered. My unit consists of having students read the appropriate sections in the textbook, complete work sheets, watch a video, and take some notes. I try to include at least one hands-on activity, one or more quizzes, and the traditional end-of-unit test consisting mostly of multiple choice questions I find in the textbook. I try to be engaging, make the lessons fun, and hope that at the end of the unit my students get whatever concepts I‘ve presented so that we can move on to the next topic. I want to increase students‘ understanding of science concepts and their ability to connect understanding to the real-world. However, sometimes I feel that my lessons are missing something. For a long time I have wanted to develop a unit of instruction that I know is an effective tool for the teaching and learning of science. In this report, I describe my efforts to reform my curricula using the “Understanding by Design” process. I want to see if this style of curriculum design will help me be a more effective teacher and if it will lead to an increase in student learning. My hypothesis is that this new (for me) approach to teaching will lead to increased understanding of science concepts among students because it is based on purposefully thinking about learning targets based on “big ideas” in science. For my reformed curricula I incorporate lessons from several outstanding programs I‘ve been involved with including EpiCenter (Purdue University), Incorporated Research Institutions for Seismology (IRIS), the Master of Science Program in Applied Science Education at Michigan Technological University, and the Michigan Association for Computer Users in Learning (MACUL). In this report, I present the methodology on how I developed a new unit of instruction based on the Understanding by Design process. I present several lessons and learning plans I‘ve developed for the unit that follow the 5E Learning Cycle as appendices at the end of this report. I also include the results of pilot testing of one of lessons. Although the lesson I pilot-tested was not as successful in increasing student learning outcomes as I had anticipated, the development process I followed was helpful in that it required me to focus on important concepts. Conducting the pilot test was also helpful to me because it led me to identify ways in which I could improve upon the lesson in the future.