Stevens County GIS Data 2009

UW access only. Questions about spatial data can be directed to uwlib-gis [at] uw [dot] edu, include the URI address below and any information you have.

Elaboração de mapa de susceptibilidade de corridas de massa/detritos e ondas de cheia, aplicado a empreendimentos dutoviários, na bacia hidrográfica do Ribeirão da Prata (SP)

Given the intense expansion of the industries in Brazil and the discovery of hydrocarbons in the pre-salt layer of the Santos and Campos Basin, there is a need to expand the distribution of oil and gas network in the country. The present work aims to present the development of susceptibility map by two distinct methods of two events (debris flows and full wave), applied to the establishment of pipelines on Ribeirão da Prata Basin. The research area covers two municipalities: São João da Boa Vista and Águas da Prata, in total 145 km2. In the paper was used the methodology proposed by Zaine (2011) for the physiographic subdivision method, which uses geological maps, geomorphological maps, digital terrain models and aerial photographs, used to extract the main elements of the physical environment, as rivers, lines, ridges, tops forms and valley forms and historical processes. Thus, the basin was divided into 11 physiographic zones, considering the following elements: thickness of soil, rock type, geomorphology, amplitude, ridges orientation, erosion occurences and mass movements. Were subsequently performed location maps of dams, that had as main purpose to localize major dams in the study area along with their area and perimeter of the reservoir, and land use map that subdivided the area in woody vegetation, permanent culture, temporary culture and urban area. Along with the preparation of the auxiliar maps was conducted a field campaign with three days and approximately 2 points per km2, which aimed to better understand the physical environment and check the main peculiarities of the study area. Criteria have been established for susceptibility maps physiographic subdivision and land use, and a survey of criteria weights used in each map for both processes under study. For the preparation of susceptibility maps were adopted two different methods, which treat the weighted average and the multiplicand. The weighted average method it is...

Análise da dinâmica do uso da terra e sua interferência em enchentes na área urbana do município de Americana (SP)

Due to an intense process of population growth and urban density in Americana (SP), mainly due to the development of the local textile industry after 1970, there was, concomitant to the occupation of the margin of rivers and streams, soil sealing that increased the level of superficial runoff, triggering frequent floods. Based on the analysis of these processes we investigate the conditions of one densely urbanized area of the county, the Córrego do Parque, in three time series, 1977, 1996 and 2008. Taking as the starting the characterization and spatial distribution of landscape physiography, we prepared thematic letters and synthetic maps digital scale 1:10,000 from photointerpretation of aeroframes. The thematic maps were produced by scanning with subsequent edition using the software Auto-Cad Map. Checking the data and of geographic coordinates with GPS (Global Positioning System). Regarding land use classes, we used the description of the Soil Conservation Service (1975) which allowed us to get the Curve Number parameter, which will be used in hydrologic modeling for verification of flooding (Tucci, 1989). For the process of hydrologic modeling, we used models based on Methodology Object Oriented Modeling Applied to Water Resource Systems, Viegas Filho (1999), using the computer program called IPHS1, which uses models of the Soil Conservation Service (SCS , 2004), for conversion of rainfall-runoff and the spread of excessive rain. The results indicate that increased waterproofing generated by the change in use and occupation over the past decades promoted the increased surface runoff and drainage system overload, increasing the intensity of floods

Le fait littéraire au temps du numérique. Pour une ontologie de l’imaginaire

Souvent conçues comme le vecteur de changements majeurs, les pratiques numériques constituent une occasion de mieux comprendre le fait littéraire en faisant apparaître de manière plus explicite que jamais des aspects ontologiques qui, en tant que tels, ont une valeur atemporelle. En particulier, et c’est l’objet de cet article, le fait numérique donne l’occasion de réinvestir une problématique qui parcourt l’ensemble de la réflexion sur le statut de la littérature depuis Platon et Aristote : celle du rapport entre littérature et réalité, dont Sartre et Derrida avaient déjà œuvré à déconstruire l’opposition au XXe siècle. Selon nous, le numérique souligne l’absence de séparation entre symbolique et non-symbolique, nous empêchant de penser une rupture entre imaginaire et réel. Pour rendre compte de cette structure, nous nous appuierons sur le concept d’éditorialisation, qui vient désigner l’ensemble des dispositifs permettant la production de contenus dans l’espace numérique en tenant compte de la fusion entre espace numérique et espace non numérique. À travers des exemples littéraires – Traque Traces de Cécile Portier et Laisse venir d’Anne Savelli et Pierre Ménard – nous démontrerons comment la littérature participe aujourd’hui à l’éditorialisation du monde, enterrant ainsi définitivement le dualisme imaginaire-réel pour lui préférer une structure anamorphique.

Le fait littéraire au temps du numérique. Pour une ontologie de l’imaginaire

Souvent conçues comme le vecteur de changements majeurs, les pratiques numériques constituent une occasion de mieux comprendre le fait littéraire en faisant apparaître de manière plus explicite que jamais des aspects ontologiques qui, en tant que tels, ont une valeur atemporelle. En particulier, et c’est l’objet de cet article, le fait numérique donne l’occasion de réinvestir une problématique qui parcourt l’ensemble de la réflexion sur le statut de la littérature depuis Platon et Aristote : celle du rapport entre littérature et réalité, dont Sartre et Derrida avaient déjà œuvré à déconstruire l’opposition au XXe siècle. Selon nous, le numérique souligne l’absence de séparation entre symbolique et non-symbolique, nous empêchant de penser une rupture entre imaginaire et réel. Pour rendre compte de cette structure, nous nous appuierons sur le concept d’éditorialisation, qui vient désigner l’ensemble des dispositifs permettant la production de contenus dans l’espace numérique en tenant compte de la fusion entre espace numérique et espace non numérique. À travers des exemples littéraires – Traque Traces de Cécile Portier et Laisse venir d’Anne Savelli et Pierre Ménard – nous démontrerons comment la littérature participe aujourd’hui à l’éditorialisation du monde, enterrant ainsi définitivement le dualisme imaginaire-réel pour lui préférer une structure anamorphique.

The Tyne Digital Library - Part 2 Maps and Images

In this section, you will find maps showing various important aspects of the River Tyne catchment area. All the maps are drawn based on Ordnance Survey data made available via the Digimap service. For the land cover maps of the catchment area, four variants are provided. Please note that the full details of the intext citations quoted in some of the following maps can be found in the full bibliographic listing.

Incorporating Legacy Soil pH Databases into Digital Soil Maps

Soil data and reliable soil maps are imperative for environmental management. conservation and policy. Data from historical point surveys, e.g. experiment site data and farmers fields can serve this purpose. However, legacy soil information is not necessarily collected for spatial analysis and mapping such that the data may not have immediately useful geo-references. Methods are required to utilise these historical soil databases so that we can produce quantitative maps of soil propel-ties to assess spatial and temporal trends but also to assess where future sampling is required. This paper discusses two such databases: the Representative Soil Sampling Scheme which has monitored the agricultural soil in England and Wales from 1969 to 2003 (between 400 and 900 bulked soil samples were taken annually from different agricultural fields); and the former State Chemistry Laboratory, Victoria, Australia where between 1973 and 1994 approximately 80,000 soil samples were submitted for analysis by farmers. Previous statistical analyses have been performed using administrative regions (with sharp boundaries) for both databases, which are largely unrelated to natural features. For a more detailed spatial analysis that call be linked to climate and terrain attributes, gradual variation of these soil properties should be described. Geostatistical techniques such as ordinary kriging are suited to this. This paper describes the format of the databases and initial approaches as to how they can be used for digital soil mapping. For this paper we have selected soil pH to illustrate the analyses for both databases.

Continuous sky view factor maps from high resolution urban digital elevation models

This paper presents a new method to calculate sky view factors (SVFs) from high resolution urban digital elevation models using a shadow casting algorithm. By utilizing weighted annuli to derive SVF from hemispherical images, the distance light source positions can be predefined and uniformly spread over the whole hemisphere, whereas another method applies a random set of light source positions with a cosine-weighted distribution of sun altitude angles. The 2 methods have similar results based on a large number of SVF images. However, when comparing variations at pixel level between an image generated using the new method presented in this paper with the image from the random method, anisotropic patterns occur. The absolute mean difference between the 2 methods is 0.002 ranging up to 0.040. The maximum difference can be as much as 0.122. Since SVF is a geometrically derived parameter, the anisotropic errors created by the random method must be considered as significant.

USGS Topographic Maps over a Hillshaded Digital Elevation Model

http://digitalcommons.colby.edu/atlasofmaine2005/1013/thumbnail.jpg

Minimum spanning trees for valley and ridge characterization in digital elevation maps

Texture synthesis employs neighbourhood matching to generate appropriate new content. Terrain synthesis has the added constraint that new content must be geographically plausible. The profile recognition and polygon breaking algorithm (PPA) [Chang et al. 1998] provides a robust mechanism for characterizing terrain as systems of valley and ridge lines in digital elevation maps. We exploit this to create a terrain characterization metric that is robust, efficient to compute and is sensitive to terrain properties.

Terrain regions are characterized as a minimum spanning tree derived from a graph created from the sample points of the elevation map which are encoded as weights in the edges of the graph. This formulation allows us to provide a single consistent feature definition that is sensitive to the pattern of ridges and valleys in the terrain Alternative formulations of these weights provide richer characteristicmeasures and we provide examples of alternate definitions based on curvature and contour measures.

We show that the measure is robust, with a significant portion derived directly from information local to the terrain sample. Global terrain characteristics introduce the issue of over- and underconnected valley/ridge lines when working with sub-regions. This is addressed by providing two graph construction strategies, which respectively provide an upper bound on connectivity as a single spanning tree, and a lower bound as a forest of trees.

Efficient minimum spanning tree algorithms are adapted to the context of terrain data and are shown to provide substantially better performance than previous PPA implementations. In particular, these are able to characterize valley and ridge behaviour at every point even in large elevation maps, providing a measure sensitive to terrain features at all scales.

The resulting graph based formulation provides an efficient and elegant algorithm for characterizing terrain features. The measure can be calculated efficiently, is robust under changes of neighbourhood position, size and resolution and the hybrid measure is sensitive to terrain features both locally and globally.

Digital soil mapping: evaluation of sampling systems for soil surveys and refinement of soil maps at lower cost using legacy data

In soil surveys, several sampling systems can be used to define the most representative sites for sample collection and description of soil profiles. In recent years, the conditioned Latin hypercube sampling system has gained prominence for soil surveys. In Brazil, most of the soil maps are at small scales and in paper format, which hinders their refinement. The objectives of this work include: (i) to compare two sampling systems by conditioned Latin hypercube to map soil classes and soil properties; (II) to retrieve information from a detailed scale soil map of a pilot watershed for its refinement, comparing two data mining tools, and validation of the new soil map; and (III) to create and validate a soil map of a much larger and similar area from the extrapolation of information extracted from the existing soil map. Two sampling systems were created by conditioned Latin hypercube and by the cost-constrained conditioned Latin hypercube. At each prospection place, soil classification and measurement of the A horizon thickness were performed. Maps were generated and validated for each sampling system, comparing the efficiency of these methods. The conditioned Latin hypercube captured greater variability of soils and properties than the cost-constrained conditioned Latin hypercube, despite the former provided greater difficulty in field work. The conditioned Latin hypercube can capture greater soil variability and the cost-constrained conditioned Latin hypercube presents great potential for use in soil surveys, especially in areas of difficult access. From an existing detailed scale soil map of a pilot watershed, topographical information for each soil class was extracted from a Digital Elevation Model and its derivatives, by two data mining tools. Maps were generated using each tool. The more accurate of these tools was used for extrapolation of soil information for a much larger and similar area and the generated map was validated. It was possible to retrieve the existing soil map information and apply it on a larger area containing similar soil forming factors, at much low financial cost. The KnowledgeMiner tool for data mining, and ArcSIE, used to create the soil map, presented better results and enabled the use of existing soil map to extract soil information and its application in similar larger areas at reduced costs, which is especially important in development countries with limited financial resources for such activities, such as Brazil.