The dynamics of Mexican manufacturing exports

Includes bibliography

Determinants of world manufacturing exports to China, 1990-2006

Includes bibliography

Causality Relationships between Total Exports with Agricultural and Manufacturing GDP in Tanzania

This paper, investigates causal relationships among agriculture, manufacturing and export in Tanzania by using time series data for the period between 1970 and 2005. The empirical results show in both sectors there is Granger causality where agriculture causes both exports and manufacturing. Exports also cause both agricultural GDP and manufacturing GDP and any two variables out of three jointly cause the third one. There is also some evidence that manufacturing does not cause export and agriculture. Regarding cointegration, pairwise agricultural GDP and export are cointegrated, export and manufacture are cointegrated. Agriculture and manufacture are cointegrated but they are lag sensitive. However, three variables, manufacturing, export and agriculture both together are cointegrated showing that they share long run relation and this has important economic implications.

International Competitiveness of Manufacturing Firms in sub-Saharan Africa

As the success of East Asian countries has shown, labor-intensive industry is recognized to lead economic growth in the early stages of development, utilizing relatively low labor costs. This same growth process has already started in South and South East Asian LDCs since the mid-1990s. However, the manufacturing sector in sub-Saharan Africa has been underdeveloped and manufacturing exports, in particular labour-intensive goods, have stagnated. This paper investigates the international competitiveness of the African manufacturing sector and its determinants through an analytical survey of empirical studies and a comparison with Asian low income countries. Empirical evidences indicate that primary factors of competitiveness, namely productivity, labour cost and exchange rate are unfavorable in sub-Saharan Africa. Representative arguments attribute the weak competitiveness to problems in the business environment, factor endowment, and the exchange rate. However, careful review shows that labour cost is beyond the range explained by endowment and misalignment of exchange rates have been reduced in Africa. Moreover, comparison with Asian low income countries which have competitiveness in labour-intensive goods shows no difference in the quality of business environment, while the labour cost is significantly lower than sub-Saharan African countries. Although results should be considered tentative, high labour cost beyond endowment and conservative investment behavior emerge as important factors for the weak competitiveness in sub-Saharan Africa when controlling income level.

Desempenho e competitividade das exportações brasileiras de produtos manufaturados na primeira década do século XXI

Há um debate a respeito da competitividade dos produtos da indústria brasileira, tanto no que se refere a concorrência que estes enfrentam no mercado doméstico com as importações quanto no mercado externo. Alguns afirmam que a dificuldade do Brasil em expandir mais a sua participação no mercado internacional de produtos manufaturados está mais fortemente ligada a problemas do lado da oferta ineficiências produtivas e custos elevados do que à falta de demanda. Deste modo, ainda que não se pretendesse avaliar as causas do desempenho das exportações de manufaturas brasileiras, esta dissertação teve como objetivo fazer um mapeamento que permitisse identificar as fontes de crescimento das exportações brasileiras de produtos manufaturados na primeira década do século XXI através do modelo de Constant Market Share (CMS). Visto que o modelo decompõe em quatro parcelas as fontes de crescimento das exportações, este trabalho conferiu especial atenção a parcela denominada efeito competitividade. Foram ainda utilizados três indicadores como forma de verificar se os mesmos revelariam haver indícios de perda de competitividade nas exportações brasileiras de manufaturas. Dos resultados encontrados é possível concluir que o efeito competitividade contribuiu positivamente para o aumento das exportações brasileiras para o mundo em 1999-2002 e 2002-2005. Entretanto, a competitividade não se mostrou como fonte de crescimento das exportações brasileiras de manufaturados nos subperíodos 2005-2008, 2008-2011 e 2011-2012. Tal resultado condiz com a piora, na média, demonstrada pelos três indicadores de competitividade ao longo do tempo.

Trade and economic growth: a Latin American perspective on rhetoric and reality

Incluye Bibliografía

The strategies of multinational companies in 1990s Argentina

Includes bibliography

Argentine industry in the early twenty-first century (2003-2008)

Includes bibliography

Maquila, currency misalignment and export-led growth in Mexico

Includes bibliography

Clothing Export from sub-Saharan Africa : Impact on Poverty and Potential for Growth

Increases in clothing exports after 2000 signaled the first incidence of large-scale manufacturing exports from sub-Saharan Africa. Using firm-level information, this paper explores the potential of clothing exports for poverty reduction and further growth as seen in other low income countries. It shows that the garment exporting industries in Kenya and Madagascar have contributed poverty reduction in the short term by providing mass employment for female and less educated workers with wages beyond the poverty line. However, the long-term impact is not certain. High production costs and limited development of local firms weaken potential for further growth in the competitive world market. Upgrading of the market and improvement of efficiency are required to remain competitive for African industries, and governmental support for local participation are needed to facilitate technology transfer.

FDI and Export Participation of Local Firms in Africa: The Case of the Kenyan Garment Industry

FDI in the garment sector has been the single case of large-scale manufacturing investment in African low-income countries since the 1990s. While FDI has triggered the development of local industries in many developing countries, it has not yet been realized in Africa. This paper describes the spillover process in the Kenyan garment industry and investigates the background of local firms' behavior through firm interviews and simulation of expected profits in export market. It shows that credit constraint, rather than absorptive capacity, is a primary source of inactive participation in export opportunity. Only firms which afford additional production facilities without sacrificing stable domestic supply may be motivated to start exporting. However, in comparison with successful Asian exporters, those firms were not as motivated as Asian firms due to the large gap in expected profits.

Political crisis and suspension of duty-free access in Madagascar : assessment of impacts on the garment industry

The export-oriented garment industry in Madagascar has displayed robust growth, thus both contributing to the economy and creating formal employment opportunities. However, it experienced a critical situation after the political turmoil that occurred in 2009. Our investigation using the trade data demonstrates that suspension of duty-free access to the US market (AGOA) resulting from the turmoil had a greater impact on exports, 64%–78% reduction, than the turmoil itself. Our original factory-level data demonstrates that AGOA suspension increased the probability of closure by 57.8% for the factories supplying exclusively to US market, and reduced 6405 jobs for low-skilled positions during the post turmoil period. The factory-level adverse impacts are much less than those on export value at the industry level because of the maintained duty-free access to EU, which has provided an alternative market. It suggests that if EU also had cancelled duty-free access, adverse impacts would have been enormous. Given the general pattern of comparative advantage in low-income countries, unplanned cancellation of duty-free access for them hurts labor-intensive industries and low-skilled workers.

Diseño de instrumentos para configurar una política industrial en España basada en los postulados de la economía evolutiva

La evidencia empírica aplicada a países de cierto tamaño y desarrollo económico, muestra que existe una relación directa y positiva entre la intensidad de la industria manufacturera, medida como porcentaje de su PIB, y ciertas variables económicas como, el crecimiento, el desempleo y la balanza exterior de bienes y servicios. En el caso de esta última, se verifica empíricamente, que los países con una proporción de actividad manufacturera inferior al 20%, tienen una marcada tendencia a presentar déficits crónicos de balanza de bienes y servicios, lo que conduce a persistentes déficits por cuenta corriente, al ser el primer déficit el principal componente del segundo. Esto trae consigo un continuado incremento del endeudamiento externo que no cesa, y que terminará en algún momento por desequilibrar el conjunto de la economía de los países con esos déficits crónicos. Las anteriores conclusiones, abren una vía de orientación de la política económica, que tiene como objetivo la promoción de la industria manufacturera de cada país. Y esto es un hecho ya en 2014. Países relevantes, como Alemania o Francia en la UE, incluso los EEUU y últimamente el Reino Unido, y por supuesto países del área asiática como Japón, Corea del Sur y China, llevan años promoviendo su industria manufacturera. Resulta significativo, que el debate ideológico sobre la bondad de la aplicación política industrial por parte de los gobiernos, frente a las teorías liberales de mantener a los poderes públicos lejos de ese tipo de actividades, haya dado paso a un modelo generalizado de corte más bien horizontal, donde los países casi sin excepciones apoyan el desarrollo de sus empresas con numerosos instrumentos, que van bastante más lejos de los habituales de I+D. Se valora por tanto, la industria manufacturera como algo vital para el equilibrio económico. Incluso la UE, defensora durante décadas de la no intervención de los diferentes Estados miembros en actividades de promoción industrial más allá del apoyo a las actividades de I+D, realiza un giro copernicano, que termina en 2012 proclamando que la industria manufacturera es vital para el equilibrio económico de la UE, que hay que promoverla, e incluso marca un objetivo, precisamente del 20%, como contribución manufacturera a su PIB. Es decir, se da por asumido que los servicios no son un sustituto indefinido de la industria y que por tanto tienen un límite, lo que se contrapone frontalmente contra la anterior creencia de que el aumento de la participación de los servicios en la economía, no solo era bueno, sino un síntoma de desarrollo. Esta premisa ya ha dejado de ser cierta para esos y otros países. En cambio, en España nada de esto sucede en las dos últimas décadas, sino que la industria manufacturera no recibe especial atención de los poderes públicos y se desliza en una pendiente de disminución de su contribución al PIB, que incluso se acelera con la crisis económica que comienza en 2007, hasta alcanzar cifras del orden del 12% del PIB en 2013. La política económica que se aplica es la de la deflación de costes, con los efectos consecuentes sobre los salarios y sobre la capacidad de la economía de generar riqueza. Se apuesta por un modelo de mano de obra barata, que recuerda al de los años 60. Como indicador relevante de esta situación, lo que exporta la industria manufacturera española, no ha ganado en contenido tecnológico en los últimos quince años. Esta situación se ve empeorada por un hecho significativo adicional, y es que casi el 40% de las ventas de la industria manufacturera española provienen de empresas de propiedad extranjera, con lo que eso supone por una parte de dependencia tecnológica del exterior como en el caso del automóvil, y de incertidumbre sobre su futuro, al estar basadas en el mantenimiento en el futuro de una mano de obra barata, que frenará que los españoles que trabajan en esas empresas, progresen económicamente. La propuesta de esta Tesis, es en cambio apostar por un modelo de crecimiento para España que tenga como uno de sus pilares el desarrollo de una industria manufacturera sólida y con cada vez mayor contenido tecnológico. Para ello, se propone un Plan de política industrial, donde se incluye la creación de actores impulsores de este plan, que deben ser del máximo nivel político. Si los diferentes gobiernos no entienden y asumen esta necesidad de apoyo a la industria a largo plazo e independiente de los cambios políticos, no será posible llevar a cabo este Plan. Para su puesta en marcha, se propone la creación o refuerzo de numerosos instrumentos de apoyo a la industria manufacturera de carácter fundamentalmente horizontal que van mucho más allá de los habituales del I+D, y que en varios casos, tienen una clara semejanza con otros existentes ya en otros países desarrollados desde hace años. La promoción de la industria manufacturera necesita nuevos instrumentos, como una financiación a largo plazo para las empresas, una promoción ordenada y eficaz de la actividad internacional de las empresas exportadoras, la mayoría de las cuales exportan productos manufacturados, una educación y formación profesional que esté alineada con estos objetivos, unos instrumentos que apoyen en especial el desarrollo la industria manufacturera, o la participación minoritaria pero significativa, del Estado en empresas españolas pertenecientes a sectores estratégicos entre otros. En resumen, esta Tesis propone una alternativa de política económica radicalmente diferente a la de dejar la industria manufacturera española a su suerte, y basar el futuro económico de España en una mano de obra barata. ABSTRACT The empirical evidence, applied to countries of certain size and economic development, shows that there exists a direct and positive relationship between industrial manufacturing activity, measured as a percentage of GDP, and certain economic variables, such as growth, unemployment and the foreign balance of trade. In the case of the latter, it is verified empirically that the countries with a percentage of manufacturing activity below 20% have a marked tendency for chronic deficits of the balance of trade, leading to persistent deficits in the current account, being that the former deficit is the main component of the latter. This brings about a continued increase in foreign debt that does not cease, and that will end at some point by disrupting the economy of the countries with these chronic deficits. The previous conclusions open the way to a new direction for economic policy, which promotes industrial manufacturing in each country. This is already a fact in 2014. Relevant countries, such as Germany or France in the EU, even the US and ultimately the UK, and of course countries of East Asia such as Japan, South Korea and China, have been promoting their industrial manufacturing for years. It becomes significant that the ideological debate about the goodwill of the application of industrial policy by governments, against liberal theories that maintain public powers far from these kinds of activities, has taken a step towards a horizontal-cut generalized model, where countries, with almost no exception, rely on various instruments to develop their companies that go much further than the usual R&D. Industrial manufacture is therefore valued as vital for economic stability. Even the EU, proponent for decades of non-intervention policy that goes beyond R&D, has gone full circle, ending in 2012 by proclaiming that industrial manufacture is vital for the economic stability of the EU, that it must be promoted. They even mark precisely 20% as an objective for manufacturing as a percentage of GDP. In other words, it is a given that services are not an indefinite substitute for industry, and that therefore it has a limit as such. This rejects the notion that the increase in services at the cost of manufacture is not only healthy, but is also a symptom of development. This premise is no longer true for these and other countries. On the other hand, none of this happens in Spain, where industrial manufacture receives no special attention from the public authorities, and it slides on a downward slope of percentage contribution to GDP, which accelerates the economic crisis that begins in 2007, until manufacture reaches values of around 12% of GDP in 2013. The economic policy applied is that of cost deflation, with consequential effects on wages and the capacity of the economy to generate wealth. A model is proposed for cheaper labor, akin to that of the 1960s. As a relevant indicator of this situation, manufacturing exports from Spain have not grown technologically in the last 15 years. The situation is made worse by another significant fact: almost 40% of sales of the manufacturing industry originate from companies of foreign origin, which supposes on one hand a technological dependence on foreign countries, such as in the case of the automotive industry, and on the other hand uncertainty in its future, being that they are based on maintaining cheap labor in the future, which will slow economic progress of Spaniards working in these companies. The proposition of this Thesis is to bet on a growth model for Spain that has as one of its pillars the development of a solid manufacturing industry, with increasing technological content. For this, an industrial policy plan is proposed, which includes the creation of driving agents for this plan, which must be of maximum political level. If the various governments don’t understand and assume this necessity for support of industry in the long term, independent of political change, this plan will not be accomplished. To start it, the creation or reinforcement of numerous instruments to promote the manufacturing activities are proposed, with a fundamentally horizontal nature that goes far beyond the usual R&D, and that, in several cases, have a clear similarity with others existing in other countries, having been developed for years. The promotion of the manufacturing industry needs new instruments, such as the long-term financing of companies, an orderly and efficient promotion of international activity of exporting companies, the most of which export manufactured goods, education and professional training which is in tune with these objectives, some instruments which support in particular the development of the manufacturing industry, or the minor yet significant participation of the State in Spanish companies belonging to strategic sectors, among others. In summary, this Thesis proposes an different alternative to the economic policy of leaving the manufacturing industry of Spain to its chances, and to base the economic future of Spain on a cheaper labor force.

The Philippines in the Aerospace Global Value Chain

This report uses the Duke CGGC Global Value Chain (GVC) framework to examine the role of the Philippines in the global aerospace industry and identify opportunities for the country to upgrade. The Philippines is a newcomer to the growing global aerospace manufacturing industry. Although the country has been host to a major flight controls manufacturer since 1985, the industry really only began to expand within the past five to ten years. During this recent period (2007-2014), the country has rapidly ramped up its aerospace manufacturing exports, reaching US$604 million in 2014 and more than tripling employment. The industry now employs 3,000 full time and 3,000 part time workers. Although still a very small player, accounting for less than 0.15% of the global industry, this incipient growth is promising. Both foreign firms and local suppliers that have established operations in the industry have already achieved some degree of upgrading within a short timeframe. These include expanding the product lines served, obtaining essential process certifications and upgrading beyond basic assembly operations to undertake additional manufacturing processes such as machining as well as initiating procurement and engineering functions in country.