A Study of the Concentration of a Low-Grade Manganese Ore from the Ennis District

The purpose of the investigation was to determine the most effective means of concentrating the manganese in the ore. The study was that of identification of the minerals present. This showed the presence of oxides of manganese and iron, and carbonates of calcium and manganese. Methods of investigation were planned to determined whether the ore could be concentrated effectively by gravity concentration methods. ­

Disintegration on heating of a Brazilian manganese lump ore

This pioneering study characterized the chemical, physical and mineralogical aspects of the Urucum Standard manganese ore typology, and evaluated some of its metallurgical characteristics, such as the main mineral heat decompositions, and the particle disintegration at room temperature and under continuous heating. A one-ton sample of ore was received, homogenized and quartered. Representative samples were collected and characterized with the aid of techniques, such as ICP-AES, XRD, SEM-EDS, BET and OM. Representative samples with particle sizes between 9.5 mm and 15.9 mm were separated to perform tumbling tests at room temperature, and thermogravimetry tests for both air and nitrogen constant flow at different temperatures. After each heating cycle, the mechanical strength of the orewas evaluated by means of screening and tumbling procedures. The Urucum Standard typology was classified as an oxidized anhydrous ore, with a high manganese content (~47%). This typology ismainly composed of cryptomelane and pyrolusite; however there is a significantamount of hematite. The Urucum Standard particles presented low susceptibility to disintegration at room temperature, but as temperature increased, susceptibility increased. No significant differences were observed between the tests done with the air or nitrogen injections.

Geological and geophysical data integration for delimitation of mineralized areas in a supergene manganese deposits

Geophysical methods are widely used in mineral exploration. This paper discusses the results of geological and geophysical studies in supergene manganese deposits of southern Brazil. Mineralized zones as described in geological surveys were characterized as of low resistivity (20 Omega.m) and high chargeability (30ms), pattern found also in oxides and sulfite mineral deposits. Pseudo-3D modeling of geophysical data allowed mapping at several depths. A relationship between high chargeability and low resistivity may define a pattern for high grade gonditic manganese ore. Large areas of high chargeability and high resistivity may result in accumulation of manganese and iron hydroxides, due to weathering of the gonditic ore, dissolution, percolation and precipitation.

A Preliminary Investigation of the Hydrometallurgy of Philipsburg Manganese

In the past the steel industry of the United States has depended almost wholly on imports for its supplies of manganese. Although it is well known that there are enormous deposits of low grade manganese ore in the United States the production of substantial amounts of ferro-grade mater­ial from domestic sources presents a field for con­structive and practical research.

Concentration of Manganese Dioxide from Philipsburg, Montana

Imports of manganese ore probably supply a major proportion of the needs of the United States. Domestic production is reported to be higher than pre-war levels, but does not equal that of the peak production year of 1943. In 1946, the Anaconda Copper Mining Company ac­counted for 90 percent of the total shipments of mangan­ese nodules, and this company is the largest producer of domestic metallurgical ore in the United States.

Contents of rare earth and other chemical elements in Fe-Mn micronodules, nodules, and bottom sediments from the Clarion-Clipperton ore province in the Pacific Ocean

Processes governing the formation of rare earth element (REE) composition are under consideration for ferromanganese deposits (nodules, separate parts of nodules, and micronodules of different size fractions) within the Clarion-Clipperton ore province in the Pacific Ocean. It is shown that ferromanganese oxyhydroxide deposits with different chemical compositions can be produced in sediments under similar sedimentation conditions. In areas with high bioproductivity size of micronodules has positive correlation with Mn content and Mn/Fe and P/Fe ratios and negative correlation with Fe, P, REE, and Ce anomaly. Behavior of REE in micronodules from sediments within bioproductive zones is related to increase of influence of diagenetic processes in sediments as a response to the growth of size of micronodules. Distinctions in chemical composition of micronodules and nodules are related to their interaction with associated sediments. Micronodules grow in sediments using hydrogenous ferromanganese oxyhydroxides. As they grow, micronodules are enriched in labile fraction of sediments reworked during diagenesis. Sources of material of ferromanganese nodules are governed by their formation at the water bottom interface. Their upper part is formed by direct settling of iron oxyhydroxides from bottom water, whereas the lower part is accumulated due to diagenetic processes in sediments. Differences of REE compositions in ferromanganese deposits are caused by the reduction of manganese during diagenesis and its separation from iron. Iron oxyhydroxides form a sorption complex due to sorption of phosphate-ion from bottom and pore waters. Sorption of phosphate-ion results in additional sorption of REE.

Description of manganese nodules collected in a metamorphic limestone Cambrian formation near Philipsburg, Montana

In the Philipsburg district, in western Montana a low arch of a Paleozoic limestones has been cut and deformed on the east and a south sides by a small batholith of Tertiary granodiorite. The manganese deposits are confined to an area of about 2 square miles underlain by sedimentary rocks and adjacent to the granodiorite body. The ore, chiefly pyrolusite, was apparently derived from rhodochrosite that was abundant in the veins and had replaced the adjacent limestones. The oxide ore is found chiefly within 600 feet of the surface, though one small body was mined at a depth of 700 feet. Commonly these bodies are aggregates of nodules or spheroids that range in size from that of an egg to that of a coconut or larger. In some places they show an irregular texture somewhat like that of a sponge, and in others the material composing them is loose and friable and apparently structureless. Psilomelane is the principal constituent of many of the nodules, in which it forms layers that alternate with softer oxides.

(Page 290) Composition of a manganese deposit sample from the Todoroki Mine, Japan

The Todoroki Mine is situated about 25 kilometers to the south-east of Ginzan railway station in Siribesi Province, Hokkaido. The author analysed an interesting specimen of black manganese-ore which had a fractured surface which looked like that of a broken piece of wood. This new manganese mineral was studied in its form, physical properties and chemical composition. The author later named this mineral form as "todorokite".

Description of manganese deposits from the Oriente province in Cuba

Deposits of manganese ore have been found in five of the six provinces of Cuba and have been reported from the sixth. Only Oriente and Pinar del Rio provinces have more than a few known deposits and only the deposits of Oriente have yielded any appreciable amount of ore. In this area the Cobre formation, of late Cretaceous(?) to middle Eocene age, overlies the Vinent formation but their stratigraphie relations are unknown. The Cobre overlies unconformably the Habana(?) formation. The Cobre formation consists of andesitic, basaltic, and dacitic tuff, agglomerate, and lavas with minor amounts of marine clastic and limestone deposits, and a prominent limestone bed, the Charco Redondo limestone member, at the top of the formation. All productive manganese deposits of Oriente are in the Cobre formation, usually within a few tens of meters above or below the base of the Charco Redondo limestone member.

Description of manganese deposits from the Todoroki mine, Hokkaido area, Japan

Manganese deposits are abundant in various places in the Oshima Peninsula southwest of Hokkaido. This is particular the case of Todoroki Mine situated about 25 kilometers to the south-east of the Ginzan railway station in Siribesi Province. It consists of manganese beds intermixed with a tertiary volcanic tuff complex overlaying granite.

Geochemical characterization of heavy metal contaminated area using multivariate factorial kriging

This paper describes a geostatistical method, known as factorial kriging analysis, which is well suited for analyzing multivariate spatial information. The method involves multivariate variogram modeling, principal component analysis, and cokriging. It uses several separate correlation structures, each corresponding to a specific spatial scale, and yields a set of regionalized factors summarizing the main features of the data for each spatial scale. This method is applied to an area of high manganese-ore mining activity in Amapa State, North Brazil. Two scales of spatial variation (0.33 and 2.0 km) are identified and interpreted. The results indicate that, for the short-range structure, manganese, arsenic, iron, and cadmium are associated with human activities due to the mining work, while for the long-range structure, the high aluminum, selenium, copper, and lead concentrations, seem to be related to the natural environment. At each scale, the correlation structure is analyzed, and regionalized factors are estimated by cokriging and then mapped.

Evaluating and classifying contaminated areas based on loss functions using annealing simulations

This paper presents a methodology based on geostatistical theory for quantifying the risks associated with heavy-metal contamination in the harbor area of Santana, Amapa State, Northern Brazil. In this area there were activities related to the commercialization of manganese ore from Serra do Navio. Manganese and arsenic concentrations at unsampled sites were estimated by postprocessing results from stochastic annealing simulations; the simulations were used to test different criteria for optimization, including average, median, and quantiles. For classifying areas as contaminated or uncontaminated, estimated quantiles based on functions of asymmetric loss showed better results than did estimates based on symmetric loss, such as the average or the median. The use of specific loss functions in the decision-making process can reduce the costs of remediation and health maintenance. The highest global health costs were observed for manganese. (c) 2008 Elsevier B.V. All rights reserved

Geologia e Caracterização Tecnológica do Minério de Manganês da Mina Córrego do Cocho, Itapira (SP)

The objects of this study are three manganese ore deposits and one mine derived from lateritic weathering of gondites (spessartine quartzites). These deposits are associated with Mn-rich garnet metasediments of the Itapira Group (Paleoproterozoic) and the reserves were estimated at approximately 2.0 × 10 6 tons with an average grade of 23% MnO 2. The ore minerals are cryptomelane, pyrolusite, lithiophorite, spessartine and psilomelane. Several crystal shapes and textural characteristics were identifi ed in this study, which are related to the degree of liberation, as confi rmed by heavy media separation method. In this study, we determined the main characteristics of the liberation of manganese, which is concentrated in the fi ne grain-size fraction and is lost during ore dressing. Therefore, the low average content of MnO 2 (28%) is due to this loss, whereas at grain size of minus 0.074 mm, contents near 40% MnO 2 were observed. This suggests that the ore can be used for manufacturing manganese sulphate fertilizers. A comparative study with the ore deposits located at Ouro Fino (MG), mainly with the Caneleiras mine, showed that higher degree of liberation occurs in the coarse grain-size fractions (0.84 to 0.074 mm with MnO 2 content of 38%). As a consequence, the ore can be used for manufacturing Fe-Si-Mn alloys.

Argilas da formação Corumbataí como base para obtenção de grés porcelanato por via seca

Pós-graduação em Geologia Regional - IGCE