The interaction between master production scheduling and detailed capacity requirements planning : closing the loop in manufacturing resource planning (MRPII) systems

The widespread implementation of Manufacturing Resource Planning (MRPII) systems in this country and abroad and the reported dissatisfaction with their use formed the initial basis of this piece of research which concentrates on the fundamental theory and design of the Closed Loop MRPII system itself. The dissertation concentrates on two key aspects namely; how Master Production Scheduling is carried out in differing business environments and how well the `closing of the loop' operates by checking the capcity requirements of the different levels of plans within an organisation. The main hypothesis which is tested is that in U.K. manufacturing industry, resource checks are either not being carried out satisfactorily or they are not being fed back to the appropriate plan in a timely fashion. The research methodology employed involved initial detailed investigations into Master Scheduling and capacity planning in eight diverse manufacturing companies. This was followed by a nationwide survey of users in 349 companies, a survey of all the major suppliers of Production Management software in the U.K. and an analysis of the facilities offered by current software packages. The main conclusion which is drawn is that the hypothesis is proved in the majority of companies in that only just over 50% of companies are attempting Resource and Capacity Planning and only 20% are successfully feeding back CRP information to `close the loop'. Various causative factors are put forward and remedies are suggested.

Estilos de aprendizagem Felder-Silverman e o aprendizado com jogos de empresa

O problema tratado nesta pesquisa foi a diferença de aprendizagem observada entre os estudantes de um curso de Planejamento e Controle da Produção (PCP). O objetivo foi descrever e analisar as diferenças de aprendizado segundo os Estilos de Aprendizagem (EdA). Examinaram-se a assimilação e compreensão (notas em provas) e os EdA de 356 aprendizes em 16 turmas de pós-graduação - MBA e Especialização - durante cinco anos. Um jogo de empresas dinamizou as vivências nas quais observou-se maior aprendizado dos estudantes com estilo reflexivo (ativo-reflexivo) ou visual (visualverbal). Ao não explorar a reflexão, o jogo pode ter restringido o ciclo de aprendizagem vivencial, sobretudo dos ativos. Sugerem-se aos educadores duas diretrizes para o desenho educacional: quando padronizado, que se busque balancear as atividades para atender aos diferentes EdA. Quando o desenho for personalizado, que se insiram atividades complementares às preferências do aprendiz, viabilizando uma vivência com equilíbrio entre ação e reflexão.

Análise dos requisitos e planos de produção gerados por um sistema de planejamento fino de produção

O tema central deste trabalho é o Planejamento, Programação e Controle da Produção na indústria, com o auxílio de uma ferramenta computacional, do tipo Finite Capacity Schedule (FCS). No Brasil, essa categoria de software é denominada, genericamente, por Sistemas de Planejamento Fino de Produção ou de Capacidade Finita. Alinhado com as tendências mundiais e a vantagem de menores investimentos em hardware, o sistema escolhido é compatível com a operação em microcomputadores. Na primeira parte do trabalho, o assunto é tratado de forma geral, quando se pretende caraterizar amplamente o problema da programação da produção, as dificuldades na sua execução, as soluções existentes e suas limitações. A segunda parte do trabalho discute, detalhadamente, os métodos tradicionais de planejamento de materiais e capacidade. A revisão bibliográfica se encerra com uma apresentação dos sistemas FCS e sua classificação. A terceira parte trata da descrição, ensaios e avaliação da programação gerada por um software de Planejamento Fino de Produção determinístico, baseado na lógica de simulação computacional com regras de decisão. Embora a avaliação esteja limitada ao software utilizado, a análise ainda vai procurar identificar as diferenças fundamentais entre os resultados da programação de Capacidade Finita e a convencional, representada pelos sistemas da categoria MRPII ou Planejamento dos Recursos de Manufatura (Manufacturing Resources Planning). As lógicas dos sistemas MRPII e de Capacidade Finita são discutidas na revisão bibliográfica, enquanto que, para o software empregado no trabalho, ainda há um capítulo específico tratando da sua descrição, fundamentos, software house, hardware necessário e outras informações relevantes. Os ensaios serão implementados com o objetivo de analisar o sistema FCS como ferramenta de planejamento e de programação de produção. No caso, uma fração de um processo produtivo será modelada no sistema, através do qual serão gerados planos de produção que serão confrontados com a programação usual e com o comportamento real dos recursos envolvidos. Os ensaios serão realizados numa das unidades pertencentes a uma empresa transnacional de grande porte, que atua no ramo de pneumáticos. Por último, são apresentadas as conclusões gerais, recomendações na aplicação do sistema estudado e sugestões para futuras pesquisas relacionadas com o assunto.

Setting parameters in MRP for the effective management of bought-out inventory in a JIT assembly environment

In recent years, UK industry has seen an explosive growth in the number of `Computer Aided Production Management' (CAPM) system installations. Of the many CAPM systems, materials requirement planning/manufacturing resource planning (MRP/MRPII) is the most widely implemented. Despite the huge investments in MRP systems, over 80 percent are said to have failed within 3 to 5 years of installation. Many people now assume that Just-In-Time (JIT) is the best manufacturing technique. However, those who have implemented JIT have found that it also has many problems. The author argues that the success of a manufacturing company will not be due to a system which complies with a single technique; but due to the integration of many techniques and the ability to make them complement each other in a specific manufacturing environment. This dissertation examines the potential for integrating MRP with JIT and Two-Bin systems to reduce operational costs involved in managing bought-out inventory. Within this framework it shows that controlling MRP is essential to facilitate the integrating process. The behaviour of MRP systems is dependent on the complex interactions between the numerous control parameters used. Methodologies/models are developed to set these parameters. The models are based on the Pareto principle. The idea is to use business targets to set a coherent set of parameters, which not only enables those business targets to be realised, but also facilitates JIT implementation. It illustrates this approach in the context of an actual manufacturing plant - IBM Havant. (IBM Havant is a high volume electronics assembly plant with the majority of the materials bought-out). The parameter setting models are applicable to control bought-out items in a wide range of industries and are not dependent on specific MRP software. The models have produced successful results in several companies and are now being developed as commercial products.

Computer integrated manufacturing (CIM) and the principle of business control

In response to the increasing international competitiveness, many manufacturing businesses are rethinking their management strategies and philosophies towards achieving a computer integrated environment. The explosive growth in Advanced Manufacturing Technology (AMI) has resulted in the formation of functional "Islands of Automation" such as Computer Aided Design (CAD), Computer Aided Manufacturing (CAM), Computer Aided Process Planning (CAPP) and Manufacturing Resources Planning (MRPII). This has resulted in an environment which has focussed areas of excellence and poor overall efficiency, co-ordination and control. The main role of Computer Integrated Manufacturing (CIM) is to integrate these islands of automation and develop a totally integrated and controlled environment. However, the various perceptions of CIM, although developing, remain focussed on a very narrow integration scope and have consequently resulted in mere linked islands of automation with little improvement in overall co-ordination and control. This thesis, that is the research described within, develops and examines a more holistic view of CIM, which is based on the integration of various business elements. One particular business element, namely control, has been shown to have a multi-facetted and underpinning relationship with the CIM philosophy. This relationship impacts various CIM system design aspects including the CIM business analysis and modelling technique, the specification of systems integration requirements, the CIM system architectural form and the degree of business redesign. The research findings show that fundamental changes to CIM system design are required; these are incorporated in a generic CIM design methodology. The affect and influence of this holistic view of CIM on a manufacturing business has been evaluated through various industrial case study applications. Based on the evidence obtained, it has been concluded that this holistic, control based approach to CIM can provide a greatly improved means of achieving a totally integrated and controlled business environment. This generic CIM methodology will therefore make a significant contribution to the planning, modelling, design and development of future CIM systems.