Immobilization and stabilization of microbial lipases by multipoint covalent attachment on aldehyde-resin affinity: Application of the biocatalysts in biodiesel synthesis

Microbial lipase preparations from Thermomyces lanuginosus (TLL) and Pseudomonas fluorescens (PFL) were immobilized by multipoint covalent attachment on Toyopearl AF-amino-650M resin and the most active and thermal stable derivatives used to catalyze the transesterificanon reaction of babassu and palm oils with ethanol in solvent-free media For this different activating agents mainly glutaraldehyde glycidol and epichlorohydrin were used and immobilization parameters were estimated based on the hydrolysis of olive oil emulsion and butyl butyrate synthesis ILL immobilized on glyoxyl-resin allowed obtaining derivatives with the highest hydrolytic activity (HA(der)) and thermal stability between 27 and 31 times more stable than the soluble lipase Although PFL derivatives were found to be less active and thermally stables similar formation of butyl butyrate concentrations were found for both ILL and PFL derivatives The highest conversion into biodiesel was found in the transesterification of palm oil catalyzed by both ILL and PFL glyoxyl-derivatives (c) 2010 Elsevier B V All rights reserved

Potencial de biocatálise enantiosseletiva de lipases microbianas

Microbial lipases have a great potential for commercial applications due to their stability, selectivity and broad substrate specificity because many non-natural acids, alcohols or amines can be used as the substrate. Three microbial lipases isolated from Brazilian soil samples (Aspergillus niger; Geotrichum candidum; Penicillium solitum) were compared in terms of their stability and as biocatalysts in the enantioselective esterification using racemic substrates in organic medium. The lipase from Aspergillus niger showed the highest activity (18.2 U/mL) and was highly thermostable, retaining 90% and 60% activity at 50 ºC and 60 ºC after 1 hour, respectively. In organic medium, this lipase provided the best results in terms of enantiomeric excess of the (S)-active acid (ee = 6.1%) and conversion value (c = 20%) in the esterification of (R,S)-ibuprofen with 1-propanol in isooctane. The esterification reaction of the racemic mixture of (R,S)-2-octanol with decanoic acid proceeded with high enantioselectivity when lipase from Aspergillus niger (E = 13.2) and commercial lipase from Candida antarctica (E = 20) were employed.

Lipases microbianas: produção, propriedades e aplicações biotecnológicas

Conselho Nacional de Desenvolvimento Científico e Tecnológico(CNPq)

Evaluation of immobilized lipases on poly-hydroxybutyrate beads to catalyze biodiesel synthesis

Five microbial lipase preparations from several sources were immobilized by hydrophobic adsorption on small or large poly-hydroxybutyrate (PHB) beads and the effect of the support particle size on the biocatalyst activity was assessed in the hydrolysis of olive oil, esterification of butyric acid with butanol and transesterification of babassu oil (Orbignya sp.) with ethanol. The catalytic activity of the immobilized lipases in both olive oil hydrolysis and biodiesel synthesis was influenced by the particle size of PHB and lipase source. In the esterification reaction such influence was not observed. Geobacillus thermocatenulatus lipase (BTL2) was considered to be inadequate to catalyze biodiesel synthesis, but displayed high esterification activity. Butyl butyrate synthesis catalyzed by BTL2 immobilized on small PHB beads gave the highest yield (approximate to 90 mmol L-1). In biodiesel synthesis, the catalytic activity of the immobilized lipases was significantly increased in comparison to the free lipases. Full conversion of babassu oil into ethyl esters was achieved at 72 h in the presence of Pseudozyma antarctica type B (CALB), Thermomyces lanuginosus lipase (Lipex (R) 100L) immobilized on either small or large PHB beads and Pseudomonas fluorescens (PFL) immobilized on large PHB beads. The latter preparation presented the highest productivity (40.9 mg of ethyl esters mg(-1) immobilized protein h(-1)). (C) 2012 Elsevier B.V. All rights reserved.

Physical properties of structured lipids from lard and soybean oil produced by enzymatic interesterification

The main goal of the present research was to evaluate the physical properties of blends of lard and soybean oil modified by enzymatic interesterification catalyzed by two different commercial (microbial) lipases, viz. from Candida cylindracea (AY30TM) and from Mucor circinelloides (M10TM). Pure lard exhibited a softening point of ca. 31.8 °C before interesterification, and this value shifted towards 29.1 °C after interesterification by AY30 lipase and towards 28.8 °C after interesterification by M10 lipase The interesterified lard exhibited lower consistency after reaction with both lipases, and this decrease was more pronounced for the reaction catalyzed by M10 lipase. This result was most likely due to the sn-1,3-specificity of M10 lipase. Pure lard displayed a lower SFC after interesterification, and M10 lipase proved to be more effective than AY30 lipase. The non-interesterified lard had a SFC of 31.3% at 10 °C, which was reduced to 23.8 and 19.9% after interesterification with AY30 lipase and M10 lipase, respectively. The lard and soybean oil blends were affected by the enzymatic interesterification and dilution with soybean oil.

Seleção de fungos termofílicos para produção de lipase e aplicação na produção de biodiesel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Expressão heteróloga e modelagem de uma enzima lipolítica utilizando a abordagem metagenômica

Pós-graduação em Microbiologia Agropecuária - FCAV

PHYSICO-CHEMICAL, SPECTROSCOPICAL AND THERMAL CHARACTERIZATION OF BIODIESEL OBTAINED BY ENZYMATIC ROUTE AS A TOOL TO SELECT THE MOST EFFICIENT IMMOBILIZED LIPASE

Two microbial lipases from Burkholderia cepacia and Pseudomonas fluorescens were evaluated as catalysts for the enzymatic transesterification of beef tallow with ethanol and the most efficient lipase source was selected by taking into account the properties of the product to be used as fuel. Both lipases were immobilized on an epoxy silica-polyvinyl alcohol composite by covalent immobilization and used to perform the reactions under the following operational conditions: beef tallow-to-ethanol molar ratio of 1:9, 45 degrees C and 400 units of enzymatic activity per gram of fat. Products, characterized using Fourier Transform Infrared spectroscopy (FTIR), viscosimetry, thermogravimetry and H-1 NMR spectroscopy, suggested that the biodiesel sample obtained in the reaction catalyzed by Burkholderia cepacia lipase has the best set of properties for fuel usage.

Preliminary Characterization of Novel Extra-cellular Lipase from Penicillium crustosum Under Solid-State Fermentation and its Potential Application for Triglycerides Hydrolysis

Current studies about lipase production involve the use of agro-industrial residues and newly isolated microorganisms aimed at increasing economic attractiveness of the process. Based on these aspects, the main objective of this work is to perform the partial characterization of enzymatic extracts produced by a newly isolated Penicillium crustosum in solid-state fermentation. Lipase extract presented optimal temperature and pH of 37 A degrees C and 9-10, respectively. The concentrated enzymatic extract showed more stability at 25 A degrees C and pH 7. The enzymes kept 100% of their enzymatic activity until 60 days of storage at 4 and -10 A degrees C. The stability under calcium salts indicated that the hydrolytic activity presented decay with the increase of calcium concentration. The specificity under several substrates indicated good enzyme activities in triglycerides from C4 to C18.

Physico-chemical, spectroscopical and thermal characterization of biodiesel obtained by enzymatic route as a tool to select the most efficient immobilized lipase

Two microbial lipases from Burkholderia cepacia and Pseudomonas fluorescens were evaluated as catalysts for the enzymatic transesterification of beef tallow with ethanol and the most efficient lipase source was selected by taking into account the properties of the product to be used as fuel. Both lipases were immobilized on an epoxy silica-polyvinyl alcohol composite by covalent immobilization and used to perform the reactions under the following operational conditions: beef tallow-to-ethanol molar ratio of 1:9, 45ºC and 400 units of enzymatic activity per gram of fat. Products, characterized using Fourier Transform Infrared spectroscopy (FTIR), viscosimetry, thermogravimetry and ¹H NMR spectroscopy, suggested that the biodiesel sample obtained in the reaction catalyzed by Burkholderia cepacia lipase has the best set of properties for fuel usage.

Produção de lipidios funcionais por ação de lipase fúngica

A modificação estrutural de óleos e gorduras é uma das principais áreas de interesse de pesquisa em diferentes setores industriais. No caso da indústria de alimentos, a interesterificação é empregada para melhorar propriedades nutricionais e funcionais, em que se obtêm compostos diferentes dos que lhes deram origem. As lipases microbianas são os biocatalisadores mais utilizados industrialmente, por serem mais estáveis, específicas e com propriedades bem mais diversificadas que as lipases de outras fontes. Este trabalho objetivou, primeiramente, a caracterização da gordura da pele de frango (GPF) e sua comparação com óleo de soja, como referência, visando a utilização de GPF em reações de interesterificação. Para isto foram caracterizados quanto aos índices de rancidez hidrolítica e oxidativa, bem como de matéria insaponificável, índices de saponificação, refração e iodo. Foi realizado ainda o fracionamento e perfil de ácidos graxos destes lipídios e suas frações, com o cálculo de seus índices nutricionais. Foi verificado que a GPF apresentou qualidade satisfatória devido aos baixos índices de acidez (0,65 g ácido oleico.100 g -1 ), peróxido (2,14 meq.kg-1 ), p-anisidina (0,70 unidades de absorvância.g-1 ), além de fonte de ácidos graxos mono-insaturados (40%), sendo fonte promissora para estudos de interesterificação. Em um segundo momento o objetivo foi produzir lipídios modificados ricos em ácidos graxos essenciais a partir da gordura da pele de frango e ácidos graxos ramificados, utilizando lipase sn-1,3 específica e interesterificação do tipo acidólise. Foram estudados os fatores concentração de enzima, adição de água, proporção de substratos e tempo, segundo um planejamento experimental fatorial completo 2 4 . As separações analíticas foram executadas em placas de cromatografia de camada delgada, sendo as frações posteriormente extraídas, ressuspensas e injetadas no cromatógrafo a gás. Foi verificado que a adição de água ao meio reacional apresentou efeito significativo (p<0,05) para todos ácidos graxos avaliados dos triacilgliceróis, sendo que para o ácido essencial linoleico (C18:2) o efeito do tempo de reação também foi significativo, sendo verificado que quanto maior o tempo de reação, menor a quantidade de água a ser adicionada. Em um terceiro momento, o objetivo foi produzir éster fenólico a partir do DHCA, além de realizar reações de transesterificação deste éster com tricaprilina. Para a reação de transesterificação, foi utilizado um delineamento composto central rotacional (DCCR) variando a quantidade de enzima, tempo de reação e temperatura sobre a resposta (%) dos reagentes consumidos. A lipase Novozym® 435 de Candida antarctica foi utilizada como catalisador de todas reações. Foi verificado que a maior produção de éster (50%) ocorreu em oito dias. Nas reações de transesterificação, as relações molares em que houve maior consumo do éster produzido foram 1:5 e 1:10, sendo obtidos 21,1% e 29,6% de residual de dihidrocafeato de octila, respectivamente em 24 h. Foi observado que em altas temperaturas e tempo superior a 26 h, houve o menor residual de dihidrocafeato de octila (18,2%). Foram identificados três diferentes compostos fenólicos, contendo em sua estrutura dihidrocafeato de octila e ácido caprílico.

Lipases de látex vegetais: propriedades e aplicações industriais

Biocatalysts have innumerous advantages with respect to classical chemical processes, such as high specificity. Lipases (EC 3.1.1.3) are biocatalysts with large application in synthesis and hydrolysis reactions of triacylglycerols. The search for new sources of lipases has been intensified in the last years due to the high cost of microbial and animal lipases, wich restricts their use on an industrial scale. Lipases obtained from the latex of Carica papaya, Carica pentagona, Euphorbia characias, E. wulfenii, known for their proteolytic properties, are a good alternative source. In this review, we describe the well-known sources of vegetal lipases extracted from the latex and present some of their industrial applications.

Screening Botryosphaeria species for lipases: Production of lipase by Botryosphaeria ribis EC-01 grown on soybean oil and other carbon sources

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Immobilization of lipases and assay in continuous fixed bed reactor

Lipases are versatile enzymes regarding the range of reactions they catalyse and substrates on which they act. They are as well important as catalyst in organic synthesis. Their immobilization on appropriate supports confer them greater stability besides the possibility of operating in continuous reactors. In order to explore these abilities, the reactions involving hydrolysis of p-nitrophenyl acetate (PNPA) and transesterification of PNPA with n-butanol were chosen. Lipases from two different sources were assayed, namely: microbial (Candida rugosa, CRL, Sigma Type VII) and pancreatic (PPL, Sigma, Type 11). Two immobilization methods were also used, namely: 1) adsorption, using as support the following silica derivatives (150-300μm e 450μ): phenyl, epoxy, amino and without derivation, and 2) covalent binding, using glutaraldehyde as binding agent and silica amino as support. This later method led to better results. Hydrolytic activity was 6.1 U/gsupport for CRL and 0.97U/gsupport for PPL, and of transesterification, 2,8U/gsupport for CRL and 1,9U/gsupport for PPL. Stability of the immobilized enzyme as a function of temperature was evaluated for CRL at 40°C and 50°C and for PPL at 32°C and 40°C. The assays were initially carried out batchwise, both for soluble and immobilized enzymes, aiming to the obtention of parameters for the continues reactor. Lipases immobilized by covalent binding were used in the assays of operacional stability in continuos reactors. For PPL in aqueous medium, at 32°C, and CRL in organic medium at 40°C, both operating continuously, no significant loss of activity was detected along the analysis period of 17 days. In the case of CRL in aqueous medium at 40°C there was a loss of activity around 40% after 18 days. For PPL in organic medium at 40°C the loss was 33% after 20 days. Compairing both sources with each other, very different results were obtained. Higher activitiy was found for CRL, both for hydrolysis and for transesterification reactions, with higher stability in organic medium. PPL showed lower activity as well as higher stability in aqueous medium. The immobilization method by covalent binding showed to be the most appropriate. Immobilized lipases are therefore relatively stable both in aqueous and organic medium.

Microbial Evaluation Of Traumatized Teeth Treated With Triple Antibiotic Paste Or Calcium Hydroxide With 2% Chlorhexidine Gel In Pulp Revascularization.

Revascularization outcome depends on microbial elimination because apical repair will not happen in the presence of infected tissues. This study evaluated the microbial composition of traumatized immature teeth and assessed their reduction during different stages of the revascularization procedures performed with 2 intracanal medicaments. Fifteen patients (7-17 years old) with immature teeth were submitted to the revascularization procedures; they were divided into 2 groups according to the intracanal medicament used: TAP group (n = 7), medicated with a triple antibiotic paste, and CHP group (n = 8), dressed with calcium hydroxide + 2% chlorhexidine gel. Samples were taken before any treatment (S1), after irrigation with 6% NaOCl (S2), after irrigation with 2% chlorhexidine (S3), after intracanal dressing (S4), and after 17% EDTA irrigation (S5). Cultivable bacteria recovered from the 5 stages were counted and identified by means of polymerase chain reaction assay (16S rRNA). Both groups had colony-forming unit counts significantly reduced after S2 (P < .05); however, no significant difference was found between the irrigants (S2 and S3, P = .99). No difference in bacteria counts was found between the intracanal medicaments used (P = .95). The most prevalent bacteria detected were Actinomyces naeslundii (66.67%), followed by Porphyromonas endodontalis, Parvimonas micra, and Fusobacterium nucleatum, which were detected in 33.34% of the root canals. An average of 2.13 species per canal was found, and no statistical correlation was observed between bacterial species and clinical/radiographic features. The microbial profile of infected immature teeth is similar to that of primarily infected permanent teeth. The greatest bacterial reduction was promoted by the irrigation solutions. The revascularization protocols that used the tested intracanal medicaments were efficient in reducing viable bacteria in necrotic immature teeth.