967 resultados para MEASURING INSTRUMENTS
Harmonization of rules on measuring instruments. Commission Press Release IP (66) 40, 27 April, 1966
Resumo:
Mode of access: Internet.
Resumo:
Includes bibliographical references and index.
Resumo:
Includes bibliography.
Resumo:
Since 2010 the Industrial Engineering School at Universidad Politécnica de Madrid (ETSII UPM) has its Plan Study accredited by ABET. Since then a big motivation has been promoted from the management team encouraging teachers to work on the measurement and strengthening of student¿s competences. Generic skills or behavior acquired significant importance in the workplace, particularly in relation to project management. Because of this, and framed within the requirements of the European Higher Education Area (EHEA), the curriculum of the new degrees are being developed under the competence-based learning. This situation leads to the need to have a clear measurement tool skills as a basis for developing them within the curriculum. A group of multidisciplinary teachers have been working together during two years to design measuring instruments valid for engineering students.
Resumo:
"Supersedes NBS handbook 45."
Resumo:
Mode of access: Internet.
Resumo:
"This manual supersedes TM 9-243, 14 September 1960, and TO 32-1-101, 19 April 1945"--P. i.
Resumo:
"July 1968."
Resumo:
Principal Topic: It is well known that most new ventures suffer from a significant lack of resources, which increases the risk of failure (Shepherd, Douglas and Shanley, 2000) and makes it difficult to attract stakeholders and financing for the venture (Bhide & Stevenson, 1999). The Resource-Based View (RBV) (Barney, 1991; Wernerfelt, 1984) is a dominant theoretical base increasingly drawn on within Strategic Management. While theoretical contributions applying RBV in the domain of entrepreneurship can arguably be traced back to Penrose (1959), there has been renewed attention recently (e.g. Alvarez & Busenitz, 2001; Alvarez & Barney, 2004). This said, empirical work is in its infancy. In part, this may be due to a lack of well developed measuring instruments for testing ideas derived from RBV. The purpose of this study is to develop a measurement scales that can serve to assist such empirical investigations. In so doing we will try to overcome three deficiencies in current empirical measures used for the application of RBV to the entrepreneurship arena. First, measures for resource characteristics and configurations associated with typical competitive advantages found in entrepreneurial firms need to be developed. These include such things as alertness and industry knowledge (Kirzner, 1973), flexibility (Ebben & Johnson, 2005), strong networks (Lee et al., 2001) and within knowledge intensive contexts, unique technical expertise (Wiklund and Shepard, 2003). Second, the RBV has the important limitations of being relatively static and modelled on large, established firms. In that context, traditional RBV focuses on competitive advantages. However, newly established firms often face disadvantages, especially those associated with the liabilities of newness (Aldrich & Auster, 1986). It is therefore important in entrepreneurial contexts to expand to an investigation of responses to competitive disadvantage through an RBV lens. Conversely, recent research has suggested that resource constraints actually have a positive effect on firm growth and performance under some circumstances (e.g., George, 2005; Katila & Shane, 2005; Mishina et al., 2004; Mosakowski, 2002; cf. also Baker & Nelson, 2005). Third, current empirical applications of RBV measured levels or amounts of particular resources available to a firm. They infer that these resources deliver firms competitive advantage by establishing a relationship between these resource levels and performance (e.g. via regression on profitability). However, there is the opportunity to directly measure the characteristics of resource configurations that deliver competitive advantage, such as Barney´s well known VRIO (Valuable, Rare, Inimitable and Organized) framework (Barney, 1997). Key Propositions and Methods: The aim of our study is to develop and test scales for measuring resource advantages (and disadvantages) and inimitability for entrepreneurial firms. The study proceeds in three stages. The first stage developed our initial scales based on earlier literature. Where possible, we adapt scales based on previous work. The first block of the scales related to the level of resource advantages and disadvantages. Respondents were asked the degree to which each resource category represented an advantage or disadvantage relative to other businesses in their industry on a 5 point response scale: Major Disadvantage, Slight Disadvantage, No Advantage or Disadvantage, Slight Advantage and Major Advantage. Items were developed as follows. Network capabilities (3 items) were adapted from (Madsen, Alsos, Borch, Ljunggren & Brastad, 2006). Knowledge resources marketing expertise / customer service (3 items) and technical expertise (3 items) were adapted from Wiklund and Shepard (2003). flexibility (2 items), costs (4 items) were adapted from JIBS B97. New scales were developed for industry knowledge / alertness (3 items) and product / service advantages. The second block asked the respondent to nominate the most important resource advantage (and disadvantage) of the firm. For the advantage, they were then asked four questions to determine how easy it would be for other firms to imitate and/or substitute this resource on a 5 point likert scale. For the disadvantage, they were asked corresponding questions related to overcoming this disadvantage. The second stage involved two pre-tests of the instrument to refine the scales. The first was an on-line convenience sample of 38 respondents. The second pre-test was a telephone interview with a random sample of 31 Nascent firms and 47 Young firms (< 3 years in operation) generated using a PSED method of randomly calling households (Gartner et al. 2004). Several items were dropped or reworded based on the pre-tests. The third stage (currently in progress) is part of Wave 1 of CAUSEE (Nascent Firms) and FEDP (Young Firms), a PSED type study being conducted in Australia. The scales will be tested and analysed with a random sample of approximately 700 Nascent and Young firms respectively. In addition, a judgement sample of approximately 100 high potential businesses in each category will be included. Findings and Implications: The paper will report the results of the main study (stage 3 – currently data collection is in progress) will allow comparison of the level of resource advantage / disadvantage across various sub-groups of the population. Of particular interest will be a comparison of the high potential firms with the random sample. Based on the smaller pre-tests (N=38 and N=78) the factor structure of the items confirmed the distinctiveness of the constructs. The reliabilities are within an acceptable range: Cronbach alpha ranged from 0.701 to 0.927. The study will provide an opportunity for researchers to better operationalize RBV theory in studies within the domain of entrepreneurship. This is a fundamental requirement for the ability to test hypotheses derived from RBV in systematic, large scale research studies.
Resumo:
Sedation scales have the potential to facilitate effective procedural sedation and analgesia in the cardiac catheterization laboratory (CCL). For this potential to become realised, a scale that is suitable for use in the CCL either needs to be identified or developed. To identify sedation scales, a review of Medline and CINHAL was conducted. One sedation scale for the CCL, the NASPE SED, and 15 Intensive Care Unit (ICU) scales met the inclusion and exclusion criteria. Analysis of the scale’s item structures and psychometric properties was then performed. None of these scales were deemed suitable for use in the CCL. As such, further research is required to develop a new scale. The new scale should consist of more than one item because it will be the most effective for tracking the patient’s response to medications. Specific tests required to conduct a rigorous evaluation of the new scale’s psychometric properties are outlined in this paper.
Resumo:
Background Post-stroke recovery is demanding. Increasing studies have examined the effectiveness of self-management programs for stroke survivors. However no systematic review has been conducted to summarize the effectiveness of theory-based stroke self-management programs. Objectives The aim is to present the best available research evidence about effectiveness of theory-based self-management programs on community-dwelling stroke survivors’ recovery. Inclusion criteria Types of participants All community-residing adults aged 18 years or above, and had a clinical diagnosis of stroke. Types of interventions Studies which examined effectiveness of a self-management program underpinned by a theoretical or conceptual framework for community-dwelling stroke survivors. Types of studies Randomized controlled trials. Types of outcomes Primary outcomes included health-related quality of life and self-management behaviors. Secondary outcomes included physical (activities of daily living), psychological (self-efficacy, depressive symptoms), and social outcomes (community reintegration, perceived social support). Search Strategy A three-step approach was adopted to identify all relevant published and unpublished studies in English or Chinese. Methodological quality The methodological quality of the included studies was assessed using the Joanna Briggs Institute critical appraisal checklist for experimental studies. Data Collection A standardized JBI data extraction form was used. There was no disagreement between the two reviewers on the data extraction results. Data Synthesis There were incomplete details about the number of participants and the results in two studies, which makes it impossible to perform meta-analysis. A narrative summary of the effectiveness of stroke self-management programs is presented. Results Three studies were included. The key issues of concern in methodological quality included insufficient information about random assignment, allocation concealment, reliability and validity of the measuring instruments, absence of intention-to-treat analysis, and small sample sizes. The three programs were designed based on the Stanford Chronic Disease Self-management program and were underpinned by the principles of self-efficacy. One study showed improvement in the intervention group in family and social roles three months after program completion, and work productivity at six months as measured by the Stroke Specific Quality of Life Scale (SSQOL). The intervention group also had an increased mean self-efficacy score in communicating with physicians six months after program completion. The mean changes from baseline in these variables were significantly different from the control group. No significant difference was found in time spent in aerobic exercise between the intervention and control groups at three and six months after program completion. Another study, using SSQOL, showed a significant interaction effect by treatment and time on family roles, fine motor tasks, self-care, and work productivity. However there was no significant interaction by treatment and time on self-efficacy. The third study showed improvement in quality of life, community participation, and depressive symptoms among the participants receiving the stroke self-management program, Stanford Chronic Disease Self-management program, or usual care six months after program completion. However, there was no significant difference between the groups. Conclusions There is inconclusive evidence about the effectiveness of theory-based stroke self-management programs on community-dwelling stroke survivors’ recovery. However the preliminary evidence suggests potential benefits in improving stroke survivors’ quality of life and self-efficacy.
Resumo:
Rolling Element Bearings (REBs) are vital components in rotating machineries for providing rotating motion. In slow speed rotating machines, bearings are normally subjected to heavy static loads and a catastrophic failure can cause enormous disruption to production and human safety. Due to its low operating speed the impact energy generated by the rotating elements on the defective components is not sufficient to produce a detectable vibration response. This is further aggravated by the inability of general measuring instruments to detect and process the weak signals at the initiation of the defect accurately. Furthermore, the weak signals are often corrupted by background noise. This is a serious problem faced by maintenance engineers today and the inability to detect an incipient failure of the machine can significantly increases the risk of functional failure and costly downtime. This paper presents the application of noise removal techniques for enhancing the detection capability for slow speed REB condition monitoring. Blind deconvolution (BD) and adaptive line enhancer (ALE) are compared to evaluate their performance in enhancing the source signal with consequential removal of background noise. In the experimental study, incipient defects were seeded on a number of roller bearings and the signals were acquired using acoustic emission (AE) sensor. Kurtosis and modified peak ratio (mPR) were used to determine the detectability of signal corrupted by noise.