“Método de Gauss”: inapropriado até no nome

Tal como ressaltado em de Faro e Guerra (2014), tem sido frequente em nossos tribunais, sentenças judiciais determinando que, relativamente ao caso de amortizações de dívidas com prestações constantes, a popular Tabela Price seja substituída por um sistema que, fundamentado em uma particular aplicação do regime de juros simples, vem sendo cognominado de “Método de Gauss” (cf. Antonick e Assunção, 2006 e Nogueira, 2013). E isso, frize-se, mantendo-se o valor numérico da taxa de juros especificada no contrato de financiamento (usualmente, habitacional). A par de ser totalmente inadequado, como discutido em de Faro (2014c), associar o nome do grande matemático alemão Johann Carl Friedrich Gauss (1777-1855) ao procedimento em questão, sucede que ao mesmo, como a qualquer outro que seja baseado no regime de juros simples, associam-se incontornáveis inconsistências. Como já anteriormente, amplamente evidenciado em de Faro (2013b e 2014a). Tomando a Tabela Price como base de comparação, o propósito do presente trabalho é o de aprofundar a análise das deficiências do que tem sido denominado como “Método de Gauss”. Em particular, dado que as sentenças judiciais costumam não alterar os valores numéricos das taxas contratuais de juros, substituindo tão somente o regime de juros compostos, que está implícito na Tabela Price, pela peculiar variante do regime de juros simples que está subjacente ao que se chama de “Método de Gauss”, buscar-se-á considerar a questão do ponto de vista do financiador.

Análise do método de Gauss como substituto dos principais sistemas de amortização no estudo da ocorrência de anatocismo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

El cálculo de la fecha del día de Pascua : un problema matemático de congruencias.

Analiza cada uno de los métodos de cálculo de la fecha del día de Pascua de Resurrección partiendo de los primeros siglos y pasando por el método de Gauss, el método de Hartmann y el método de Butcher.

Comparação de alguns modelos matemáticos para ajuste à curva de lactação média de um rebanho da raça Caracu

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo de modelos não-lineares na descrição do crescimento de fêmeas da raça Canchim

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ajustes de curvas de crescimento e estimativas da variabilidade genética de peso corporal de avestruzes (Struthio camelus)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Deposição de nutrientes na carcaça de girinos de rã-touro

The objective of this work was to determine nutrient deposition on the carcass of bullfrog (Lithobates catesbeianus) tadpoles using a nonlinear model. A total of 2,700 tadpoles with an average weight of 0.039 g were used. Commercial ground feed containing 55% crude protein was offered ad libitum. The animals were weighed and evaluated every ten days for analysis of crude protein, ether extract, water, and mineral salt contents. The parameters of the Gompertz model were estimated by the modified Gauss-Newton method, and the deposition rates (g per day) over time were calculated by the resulting equation. The values found for the parameters of the Gompertz equation, used to describe nutrient deposition on tadpole carcass, showed biological interpretation. Maximum deposition rate (t*) was observed on the 36.2331th day for protein, on the 37.1420th day for water, on the 35.2971th day for mineral salt, and on the 41.3547th day for fat. Nutrient intake from the diet is higher than the deposition rate on the tadpole carcass.

Distributed collaborative processing in wireless sensor networks with application to target localization and beamforming

Abstract The proliferation of wireless sensor networks and the variety of envisioned applications associated with them has motivated the development of distributed algorithms for collaborative processing over networked systems. One of the applications that has attracted the attention of the researchers is that of target localization where the nodes of the network try to estimate the position of an unknown target that lies within its coverage area. Particularly challenging is the problem of estimating the target’s position when we use received signal strength indicator (RSSI) due to the nonlinear relationship between the measured signal and the true position of the target. Many of the existing approaches suffer either from high computational complexity (e.g., particle filters) or lack of accuracy. Further, many of the proposed solutions are centralized which make their application to a sensor network questionable. Depending on the application at hand and, from a practical perspective it could be convenient to find a balance between localization accuracy and complexity. Into this direction we approach the maximum likelihood location estimation problem by solving a suboptimal (and more tractable) problem. One of the main advantages of the proposed scheme is that it allows for a decentralized implementation using distributed processing tools (e.g., consensus and convex optimization) and therefore, it is very suitable to be implemented in real sensor networks. If further accuracy is needed an additional refinement step could be performed around the found solution. Under the assumption of independent noise among the nodes such local search can be done in a fully distributed way using a distributed version of the Gauss-Newton method based on consensus. Regardless of the underlying application or function of the sensor network it is al¬ways necessary to have a mechanism for data reporting. While some approaches use a special kind of nodes (called sink nodes) for data harvesting and forwarding to the outside world, there are however some scenarios where such an approach is impractical or even impossible to deploy. Further, such sink nodes become a bottleneck in terms of traffic flow and power consumption. To overcome these issues instead of using sink nodes for data reporting one could use collaborative beamforming techniques to forward directly the generated data to a base station or gateway to the outside world. In a dis-tributed environment like a sensor network nodes cooperate in order to form a virtual antenna array that can exploit the benefits of multi-antenna communications. In col-laborative beamforming nodes synchronize their phases in order to add constructively at the receiver. Some of the inconveniences associated with collaborative beamforming techniques is that there is no control over the radiation pattern since it is treated as a random quantity. This may cause interference to other coexisting systems and fast bat-tery depletion at the nodes. Since energy-efficiency is a major design issue we consider the development of a distributed collaborative beamforming scheme that maximizes the network lifetime while meeting some quality of service (QoS) requirement at the re¬ceiver side. Using local information about battery status and channel conditions we find distributed algorithms that converge to the optimal centralized beamformer. While in the first part we consider only battery depletion due to communications beamforming, we extend the model to account for more realistic scenarios by the introduction of an additional random energy consumption. It is shown how the new problem generalizes the original one and under which conditions it is easily solvable. By formulating the problem under the energy-efficiency perspective the network’s lifetime is significantly improved. Resumen La proliferación de las redes inalámbricas de sensores junto con la gran variedad de posi¬bles aplicaciones relacionadas, han motivado el desarrollo de herramientas y algoritmos necesarios para el procesado cooperativo en sistemas distribuidos. Una de las aplicaciones que suscitado mayor interés entre la comunidad científica es la de localization, donde el conjunto de nodos de la red intenta estimar la posición de un blanco localizado dentro de su área de cobertura. El problema de la localization es especialmente desafiante cuando se usan niveles de energía de la seal recibida (RSSI por sus siglas en inglés) como medida para la localization. El principal inconveniente reside en el hecho que el nivel de señal recibida no sigue una relación lineal con la posición del blanco. Muchas de las soluciones actuales al problema de localization usando RSSI se basan en complejos esquemas centralizados como filtros de partículas, mientas que en otras se basan en esquemas mucho más simples pero con menor precisión. Además, en muchos casos las estrategias son centralizadas lo que resulta poco prácticos para su implementación en redes de sensores. Desde un punto de vista práctico y de implementation, es conveniente, para ciertos escenarios y aplicaciones, el desarrollo de alternativas que ofrezcan un compromiso entre complejidad y precisión. En esta línea, en lugar de abordar directamente el problema de la estimación de la posición del blanco bajo el criterio de máxima verosimilitud, proponemos usar una formulación subóptima del problema más manejable analíticamente y que ofrece la ventaja de permitir en¬contrar la solución al problema de localization de una forma totalmente distribuida, convirtiéndola así en una solución atractiva dentro del contexto de redes inalámbricas de sensores. Para ello, se usan herramientas de procesado distribuido como los algorit¬mos de consenso y de optimización convexa en sistemas distribuidos. Para aplicaciones donde se requiera de un mayor grado de precisión se propone una estrategia que con¬siste en la optimización local de la función de verosimilitud entorno a la estimación inicialmente obtenida. Esta optimización se puede realizar de forma descentralizada usando una versión basada en consenso del método de Gauss-Newton siempre y cuando asumamos independencia de los ruidos de medida en los diferentes nodos. Independientemente de la aplicación subyacente de la red de sensores, es necesario tener un mecanismo que permita recopilar los datos provenientes de la red de sensores. Una forma de hacerlo es mediante el uso de uno o varios nodos especiales, llamados nodos “sumidero”, (sink en inglés) que actúen como centros recolectores de información y que estarán equipados con hardware adicional que les permita la interacción con el exterior de la red. La principal desventaja de esta estrategia es que dichos nodos se convierten en cuellos de botella en cuanto a tráfico y capacidad de cálculo. Como alter¬nativa se pueden usar técnicas cooperativas de conformación de haz (beamforming en inglés) de manera que el conjunto de la red puede verse como un único sistema virtual de múltiples antenas y, por tanto, que exploten los beneficios que ofrecen las comu¬nicaciones con múltiples antenas. Para ello, los distintos nodos de la red sincronizan sus transmisiones de manera que se produce una interferencia constructiva en el recep¬tor. No obstante, las actuales técnicas se basan en resultados promedios y asintóticos, cuando el número de nodos es muy grande. Para una configuración específica se pierde el control sobre el diagrama de radiación causando posibles interferencias sobre sis¬temas coexistentes o gastando más potencia de la requerida. La eficiencia energética es una cuestión capital en las redes inalámbricas de sensores ya que los nodos están equipados con baterías. Es por tanto muy importante preservar la batería evitando cambios innecesarios y el consecuente aumento de costes. Bajo estas consideraciones, se propone un esquema de conformación de haz que maximice el tiempo de vida útil de la red, entendiendo como tal el máximo tiempo que la red puede estar operativa garantizando unos requisitos de calidad de servicio (QoS por sus siglas en inglés) que permitan una decodificación fiable de la señal recibida en la estación base. Se proponen además algoritmos distribuidos que convergen a la solución centralizada. Inicialmente se considera que la única causa de consumo energético se debe a las comunicaciones con la estación base. Este modelo de consumo energético es modificado para tener en cuenta otras formas de consumo de energía derivadas de procesos inherentes al funcionamiento de la red como la adquisición y procesado de datos, las comunicaciones locales entre nodos, etc. Dicho consumo adicional de energía se modela como una variable aleatoria en cada nodo. Se cambia por tanto, a un escenario probabilístico que generaliza el caso determinista y se proporcionan condiciones bajo las cuales el problema se puede resolver de forma eficiente. Se demuestra que el tiempo de vida de la red mejora de forma significativa usando el criterio propuesto de eficiencia energética.

On the development of advanced techniques for mixed-elastohydrodynamic lubrification modelling of journal and sliding bearing systems.

The present thesis is focused on the development of a thorough mathematical modelling and computational solution framework aimed at the numerical simulation of journal and sliding bearing systems operating under a wide range of lubrication regimes (mixed, elastohydrodynamic and full film lubrication regimes) and working conditions (static, quasi-static and transient conditions). The fluid flow effects have been considered in terms of the Isothermal Generalized Equation of the Mechanics of the Viscous Thin Films (Reynolds equation), along with the massconserving p-Ø Elrod-Adams cavitation model that accordingly ensures the so-called JFO complementary boundary conditions for fluid film rupture. The variation of the lubricant rheological properties due to the viscous-pressure (Barus and Roelands equations), viscous-shear-thinning (Eyring and Carreau-Yasuda equations) and density-pressure (Dowson-Higginson equation) relationships have also been taken into account in the overall modelling. Generic models have been derived for the aforementioned bearing components in order to enable their applications in general multibody dynamic systems (MDS), and by including the effects of angular misalignments, superficial geometric defects (form/waviness deviations, EHL deformations, etc.) and axial motion. The bearing exibility (conformal EHL) has been incorporated by means of FEM model reduction (or condensation) techniques. The macroscopic in fluence of the mixedlubrication phenomena have been included into the modelling by the stochastic Patir and Cheng average ow model and the Greenwood-Williamson/Greenwood-Tripp formulations for rough contacts. Furthermore, a deterministic mixed-lubrication model with inter-asperity cavitation has also been proposed for full-scale simulations in the microscopic (roughness) level. According to the extensive mathematical modelling background established, three significant contributions have been accomplished. Firstly, a general numerical solution for the Reynolds lubrication equation with the mass-conserving p - Ø cavitation model has been developed based on the hybridtype Element-Based Finite Volume Method (EbFVM). This new solution scheme allows solving lubrication problems with complex geometries to be discretized by unstructured grids. The numerical method was validated in agreement with several example cases from the literature, and further used in numerical experiments to explore its exibility in coping with irregular meshes for reducing the number of nodes required in the solution of textured sliding bearings. Secondly, novel robust partitioned techniques, namely: Fixed Point Gauss-Seidel Method (PGMF), Point Gauss-Seidel Method with Aitken Acceleration (PGMA) and Interface Quasi-Newton Method with Inverse Jacobian from Least-Squares approximation (IQN-ILS), commonly adopted for solving uid-structure interaction problems have been introduced in the context of tribological simulations, particularly for the coupled calculation of dynamic conformal EHL contacts. The performance of such partitioned methods was evaluated according to simulations of dynamically loaded connecting-rod big-end bearings of both heavy-duty and high-speed engines. Finally, the proposed deterministic mixed-lubrication modelling was applied to investigate the in fluence of the cylinder liner wear after a 100h dynamometer engine test on the hydrodynamic pressure generation and friction of Twin-Land Oil Control Rings.

Influencia de las medidas queratométricas en el cálculo de la potencia de lentes intraoculares

Índice, resumen, conclusiones y bibliografía de la memoria del Máster en Optometría Clínica y Visión, Programa formativo en Biomedicina y Tecnologías para la vida.

Gauss : recursos interactivos de Matemáticas : Primaria y ESO.

Resumen basado en el de la publicación

Aerodinâmica de automóveis baseado no método dos contornos virtuais

Este trabalho desenvolve um método numérico para a solução de escoamentos bidimensionais em torno de geometrias automobilísticas utilizando o método de diferenças finitas. O código computacional resolve as equações de Navier-Stokes e de Euler para uma distribuição adequada dos pontos discretos na malha. O método de integração empregado baseia-se no esquema explícito de Runge-Kutta de 3 estágios para as equações da quantidade de movimento e no de sub-relaxações sucessivas para a pressão na base Gauss-Seidel. Utilizou-se a técnica dos contornos virtuais em coordenadas cartesianas para resolver o escoamento sobre uma geometria simplificada, com a superfície coincidente com a malha computacional, e uma geometria automobilística mais complexa (BMW). Para a certificação da técnica empregada, optou-se pela utilização da teoria do escoamento potencial e pela comparação com dados experimentais encontrados na literatura e outros coletados em túnel de vento em escala reduzida. Houve dificuldade nesta comparação devido à falta de artigos relativos às simulações numéricas de escoamentos sobre automóveis e na aplicação da técnica dos contornos virtuais em geometrias complexas. Os resultados foram satisfatórios, com boas perspectivas para trabalhos futuros, contribuindo assim para o desenvolvimento da área.

Solução da equação de difusão-advecção para uma CLP não-homogênea e não-estacionária pelo método GILTT

Neste trabalho é apresentada a solução da equação de difusão-advecção transiente para simular a dispersão de poluentes na Camada Limite Planetária. A solução é obtida através do método analítico GILTT (Generalized Integral Laplace Transform Technique) e da técnica de inversão numérica da quadratura de Gauss. A validação da solução é comprovada utilizando as concentraçãos obtidas a partir do modelo com as obtidas experimentalmente pelo Experimento de Copenhagen. Nesta comparação foram utilizados os perfis de vento potencial e logaritmo e os parâmetros de turbulência propostos por Degrazia et al (1997) [19] e (2002) [17]. Os melhores resultados foram obtidos utilizando o perfil de vento potencial e o coeficiente de difusão propostos por Degrazia et al (1997). A influência da velocidade vertical é mostrada através do comportamento das concentrações de poluentes na pluma. Além disso, as velocidades verticais e longitudinais geradas pelo Large Eddy Simulation (LES) foram colocadas no modelo para poder simular uma camada limite turbulenta mais realística, a qual apresentou resultados satisfatórios quando comparados com os disponíveis na literatura.

Um algoritmo para estimação de estado em alimentadores de distribuição de energia elétrica com base no método da soma de potências

Most algorithms for state estimation based on the classical model are just adequate for use in transmission networks. Few algorithms were developed specifically for distribution systems, probably because of the little amount of data available in real time. Most overhead feeders possess just current and voltage measurements at the middle voltage bus-bar at the substation. In this way, classical algorithms are of difficult implementation, even considering off-line acquired data as pseudo-measurements. However, the necessity of automating the operation of distribution networks, mainly in regard to the selectivity of protection systems, as well to implement possibilities of load transfer maneuvers, is changing the network planning policy. In this way, some equipments incorporating telemetry and command modules have been installed in order to improve operational features, and so increasing the amount of measurement data available in real-time in the System Operation Center (SOC). This encourages the development of a state estimator model, involving real-time information and pseudo-measurements of loads, that are built from typical power factors and utilization factors (demand factors) of distribution transformers. This work reports about the development of a new state estimation method, specific for radial distribution systems. The main algorithm of the method is based on the power summation load flow. The estimation is carried out piecewise, section by section of the feeder, going from the substation to the terminal nodes. For each section, a measurement model is built, resulting in a nonlinear overdetermined equations set, whose solution is achieved by the Gaussian normal equation. The estimated variables of a section are used as pseudo-measurements for the next section. In general, a measurement set for a generic section consists of pseudo-measurements of power flows and nodal voltages obtained from the previous section or measurements in real-time, if they exist -, besides pseudomeasurements of injected powers for the power summations, whose functions are the load flow equations, assuming that the network can be represented by its single-phase equivalent. The great advantage of the algorithm is its simplicity and low computational effort. Moreover, the algorithm is very efficient, in regard to the accuracy of the estimated values. Besides the power summation state estimator, this work shows how other algorithms could be adapted to provide state estimation of middle voltage substations and networks, namely Schweppes method and an algorithm based on current proportionality, that is usually adopted for network planning tasks. Both estimators were implemented not only as alternatives for the proposed method, but also looking for getting results that give support for its validation. Once in most cases no power measurement is performed at beginning of the feeder and this is required for implementing the power summation estimations method, a new algorithm for estimating the network variables at the middle voltage bus-bar was also developed

A relação cartográfica e geometria diferencial de Mercator a Gauss

Pós-graduação em Educação Matemática - IGCE