Videography as production nexus : digital film cameras, media mangement and the distribution of creativity

This thesis is about new digital moving image recording technologies and how they augment the distribution of creativity and the flexibility in moving image production systems, but also impose constraints on how images flow through the production system. The central concept developed in this thesis is ‘creative space’ which links quality and efficiency in moving image production to time for creative work, capacity of digital tools, user skills and the constitution of digital moving image material. The empirical evidence of this thesis is primarily based on semi-structured interviews conducted with Swedish film and TV production representatives.This thesis highlights the importance of pre-production technical planning and proposes a design management support tool (MI-FLOW) as a way to leverage functional workflows that is a prerequisite for efficient and cost effective moving image production.

First-principle data-driven models for assessment of motor disorders in Parkinson’s disease

Parkinson’s disease (PD) is an increasing neurological disorder in an aging society. The motor and non-motor symptoms of PD advance with the disease progression and occur in varying frequency and duration. In order to affirm the full extent of a patient’s condition, repeated assessments are necessary to adjust medical prescription. In clinical studies, symptoms are assessed using the unified Parkinson’s disease rating scale (UPDRS). On one hand, the subjective rating using UPDRS relies on clinical expertise. On the other hand, it requires the physical presence of patients in clinics which implies high logistical costs. Another limitation of clinical assessment is that the observation in hospital may not accurately represent a patient’s situation at home. For such reasons, the practical frequency of tracking PD symptoms may under-represent the true time scale of PD fluctuations and may result in an overall inaccurate assessment. Current technologies for at-home PD treatment are based on data-driven approaches for which the interpretation and reproduction of results are problematic.  The overall objective of this thesis is to develop and evaluate unobtrusive computer methods for enabling remote monitoring of patients with PD. It investigates first-principle data-driven model based novel signal and image processing techniques for extraction of clinically useful information from audio recordings of speech (in texts read aloud) and video recordings of gait and finger-tapping motor examinations. The aim is to map between PD symptoms severities estimated using novel computer methods and the clinical ratings based on UPDRS part-III (motor examination). A web-based test battery system consisting of self-assessment of symptoms and motor function tests was previously constructed for a touch screen mobile device. A comprehensive speech framework has been developed for this device to analyze text-dependent running speech by: (1) extracting novel signal features that are able to represent PD deficits in each individual component of the speech system, (2) mapping between clinical ratings and feature estimates of speech symptom severity, and (3) classifying between UPDRS part-III severity levels using speech features and statistical machine learning tools. A novel speech processing method called cepstral separation difference showed stronger ability to classify between speech symptom severities as compared to existing features of PD speech. In the case of finger tapping, the recorded videos of rapid finger tapping examination were processed using a novel computer-vision (CV) algorithm that extracts symptom information from video-based tapping signals using motion analysis of the index-finger which incorporates a face detection module for signal calibration. This algorithm was able to discriminate between UPDRS part III severity levels of finger tapping with high classification rates. Further analysis was performed on novel CV based gait features constructed using a standard human model to discriminate between a healthy gait and a Parkinsonian gait. The findings of this study suggest that the symptom severity levels in PD can be discriminated with high accuracies by involving a combination of first-principle (features) and data-driven (classification) approaches. The processing of audio and video recordings on one hand allows remote monitoring of speech, gait and finger-tapping examinations by the clinical staff. On the other hand, the first-principles approach eases the understanding of symptom estimates for clinicians. We have demonstrated that the selected features of speech, gait and finger tapping were able to discriminate between symptom severity levels, as well as, between healthy controls and PD patients with high classification rates. The findings support suitability of these methods to be used as decision support tools in the context of PD assessment.

Demonstration of Solar Heating and Cooling System using Sorption Integrated Solar Thermal Collectors

Producing cost-competitive small and medium-sized solar cooling systems is currently a significant challenge. Due to system complexity, extensive engineering, design and equipment costs; the installation costs of solar thermal cooling systems are prohibitively high. In efforts to overcome these limitations, a novel sorption heat pump module has been developed and directly integrated into a solar thermal collector. The module comprises a fully encapsulated sorption tube containing hygroscopic salt sorbent and water as a refrigerant, sealed under vacuum with no moving parts. A 5.6m2 aperture area outdoor laboratory-scale system of sorption module integrated solar collectors was installed in Stockholm, Sweden and evaluated under constant re-cooling and chilled fluid return temperatures in order to assess collector performance. Measured average solar cooling COP was 0.19 with average cooling powers between 120 and 200 Wm-2 collector aperture area. It was observed that average collector cooling power is constant at daily insolation levels above 3.6 kWhm-2 with the cooling energy produced being proportional to solar insolation. For full evaluation of an integrated sorption collector solar heating and cooling system, under the umbrella of a European Union project for technological innovation, a 180 m2 large-scale demonstration system has been installed in Karlstad, Sweden. Results from the installation commissioned in summer 2014 with non-optimised control strategies showed average electrical COP of 10.6 and average cooling powers between 140 and 250 Wm-2 collector aperture area. Optimisation of control strategies, heat transfer fluid flows through the collectors and electrical COP will be carried out in autumn 2014.

Evaluation of a thermally driven heat pump for solar heating and cooling applications

Exploiting solar energy technology for both heating and cooling purposes has the potential of meeting an appreciable portion of the energy demand in buildings throughout the year. By developing an integrated, multi-purpose solar energy system, that can operate all twelve months of the year, a high utilisation factor can be achieved which translates to more economical systems. However, there are still some techno-economic barriers to the general commercialisation and market penetration of such technologies. These are associated with high system and installation costs, significant system complexity, and lack of knowledge of system implementation and expected performance. A sorption heat pump module that can be integrated directly into a solar thermal collector has thus been developed in order to tackle the aforementioned market barriers. This has been designed for the development of cost-effective pre-engineered solar energy system kits that can provide both heating and cooling. This thesis summarises the characterisation studies of the operation of individual sorption modules, sorption module integrated solar collectors and a full solar heating and cooling system employing sorption module integrated collectors. Key performance indicators for the individual sorption modules showed cooling delivery for 6 hours at an average power of 40 W and a temperature lift of 21°C. Upon integration of the sorption modules into a solar collector, measured solar radiation energy to cooling energy conversion efficiencies (solar cooling COP) were between 0.10 and 0.25 with average cooling powers between 90 and 200 W/m2 collector aperture area. Further investigations of the sorption module integrated collectors implementation in a full solar heating and cooling system yielded electrical cooling COP ranging from 1.7 to 12.6 with an average of 10.6 for the test period. Additionally, simulations were performed to determine system energy and cost saving potential for various system sizes over a full year of operation for a 140 m2 single-family dwelling located in Madrid, Spain. Simulations yielded an annual solar fraction of 42% and potential cost savings of €386 per annum for a solar heating and cooling installation employing 20m2 of sorption integrated collectors.

Emissions from realistic operation of residential wood pellets heating systems

Emissions from residential combustion appliances vary significantly depending on the firing behaviours and combustion conditions, in addition to combustion technologies and fuel quality. Although wood pellet combustion in residential heating boilers is efficient, the combustion conditions during start-up and stop phases are not optimal and produce significantly high emissions such as carbon monoxide and hydrocarbon from incomplete combustion. The emissions from the start-up and stop phases of the pellet boilers are not fully taken into account in test methods for ecolabels which primarily focus on emissions during operation on full load and part load. The objective of the thesis is to investigate the emission characteristics during realistic operation of residential wood pellet boilers in order to identify when the major part of the annual emissions occur. Emissions from four residential wood pellet boilers were measured and characterized for three operating phases (start-up, steady and stop). Emissions from realistic operation of combined solar and wood pellet heating systems was continuously measured to investigate the influence of start-up and stop phases on total annual emissions. Measured emission data from the pellet devices were used to build an emission model to predict the annual emission factors from the dynamic operation of the heating system using the simulation software TRNSYS. Start-up emissions are found to vary with ignition type, supply of air and fuel, and time to complete the phase. Stop emissions are influenced by fan operation characteristics and the cleaning routine. Start-up and stop phases under realistic operation conditions contribute 80 – 95% of annual carbon monoxide (CO) emission, 60 – 90% total hydrocarbon (TOC), 10 – 20% of nitrogen oxides (NO), and 30 – 40% particles emissions. Annual emission factors from realistic operation of tested residential heating system with a top fed wood pelt boiler can be between 190 and 400 mg/MJ for the CO emissions, between 60 and 95 mg/MJ for the NO, between 6 and 25 mg/MJ for the TOC, between 30 and 116 mg/MJ for the particulate matter and between 2x10-13 /MJ and 4x10-13 /MJ for the number of particles. If the boiler has the cleaning sequence with compressed air such as in boiler B2, annual CO emission factor can be up to 550 mg/MJ. Average CO, TOC and particles emissions under realistic annual condition were greater than the limits values of two eco labels. These results highlight the importance of start-up and stop phases in annual emission factors (especially CO and TOC). Since a large or dominating part of the annual emissions in real operation arise from the start-up and stop sequences, test methods required by the ecolabels should take these emissions into account. In this way it will encourage the boiler manufacturers to minimize annual emissions. The annual emissions of residential pellet heating system can be reduced by optimizing the number of start-ups of the pellet boiler. It is possible to reduce up to 85% of the number of start-ups by optimizing the system design and its controller such as switching of the boiler pump after it stops, using two temperature sensors for boiler ON/OFF control, optimizing of the positions of the connections to the storage tank, increasing the mixing valve temperature in the boiler circuit and decreasing the pump flow rate. For 85 % reduction of start-ups, 75 % of CO and TOC emission factors were reduced while 13% increase in NO and 15 % increase in particle emissions was observed.

Manager's task to support integrated autonomy at the workplace : Results from an intervention

A new managerial task arises in today’s working life: to provide conditions for and influence interaction between actors and thus to enable the emergence of organizing structure in tune with a changing environment. We call this the enabling managerial task. The goal of this paper is to study whether training first line managers in the enabling managerial task could lead to changes in the work for the subordinates. This paper presents results from questionnaires answered by the subordinates of the managers before and after the training. The training was organized as a learning network and consisted of eight workshops carried out over a period of one year (September 2009–June 2010), where the managers met with each other and the researchers once a month. Each workshop consisted of three parts, during three and a half hours. The first hour was devoted to joint reflection on a task that had been undertaken since the last workshop; some results were presented from the employee pre-assessments, followed by relevant theory and illuminating practices, finally the managers created new tasks for themselves to undertake during the following month. The subordinates’ answers show positive change in all of the seventeen scales used to assess it. The improvements are significant in scales measuring the relationship between the manager and the employees, as well as in those measuring interaction between employees. It is concluded that the result was a success for all managers that had the possibility of using the training in their management work.

Personalisation of intelligent homecare services adapted to children with motor impairments

Ambient Intelligence could support innovative application domains like motor impairments' detection at the home environment. This research aims to prevent neurodevelopmental disorders through the natural interaction of the children with embedded intelligence daily life objects, like home furniture and toys. Designed system uses an interoperable platform to provide two intelligent interrelated home healthcare services: monitoring of children¿s abilities and completion of early stimulation activities. A set of sensors, which are embedded within the rooms, toys and furniture, allows private data gathering about the child's interaction with the environment. This information feeds a reasoning subsystem, which encloses an ontology of neurodevelopment items, and adapts the service to the age and acquisition of expected abilities. Next, the platform proposes customized stimulation services by taking advantage of the existing facilities at the child's environment. The result integrates Embedded Sensor Systems for Health at Mälardalen University with UPM Smart Home, for adapted services delivery.

Ring Out Your Dead : Distribution, form, and function of iron amulets in the late Iron Age grave fields of Lovö

The purpose of this study is to analyze the distribution, forms, and function(s) of iron amulets deposited in the late Iron Age gravefields of Lovö, with the goal of ascertaining how (and so far as possible why) these objects were utilized in rituals carried out during and after burials. Particular emphasis is given to re-interpreting the largest group of iron amulets, the iron amulet rings, in a more relational and practice-focused way than has heretofore been attempted. By framing burial analyses, questions of typology, and evidence of ritualized actions in comparison with what is known of other cult sites in Mälardalen specifically– and theorized about the cognitive landscape(s) of late Iron Age Scandinavia generally– a picture of iron amulets as inscribed objects made to act as catalytic, protective, and mediating agents is brought to light.

Worries and possibilities in active citizenship : Three Swedish educational contexts

This article examines how the concept of active citizenship has been given a neo-liberal character by examining practice in three different educational contexts in Sweden. The concept of active citizenship has become influential in educational policy and practice throughout the European Union. The aim of this article is to highlight concerns at how this concept has come to be re-shaped by neo-liberal principles in Swedish education. The analysis highlights three themes, based on voice, ethical awareness and complexity and mutuality of lived experience, and argues that they provide the basis for a shift away from the present neo-liberal colouring of the concept.

"Vi kan skriva förargument och sedan motargument" ­­ : Om deliberativa samtal i undervisning i svenska som andraspråk på högskolenivå

In the light of the twofold mission of Swedish schools, that is to say enabling pupils to develop both subject knowledge and a democratic attitude, the purpose of this thesis is to investigate to what extent adult higher education students from different language and social backgrounds, studying Swedish as a second language, are able to carry out joint writing assignments with the aid of deliberative discourse, and to what extent they thereby also develop a deliberative attitude. The twofold mission of education applies to them too. While there already exists a certain amount of research into deliberative discourse relating to education in schools, the perspective of higher education didactics in this research is still lacking. The present study is to be viewed as a first contribution to this research. The theoretical starting point of this study includes previous research into deliberative discourse by further developing an existing model regarding criteria for deliberative discourse, for example that there is a striving towards agreement, although the consensus may be temporary, that diverging opinions can be set against each other, that tolerance and respect for views other than one’s own are shown, and that traditional outlooks can be questioned. This model is supplemented by designations for a number of disruptive behaviours, such as ridiculing, ignoring, interrupting people and engaging in private conversations. The thus further developed model will thereafter act as a lens in the analysis of students’ discussions when writing joint texts. Another theoretical starting point is the view of education as communication, and of the possibility of communication creating a third place, thereby developing democracy in the here and now-situation. For this study, comprising 18 hours of observation of nine students, that is to say the discussions of three groups in connection with writing texts on different occasions, various ethnographic data collection methods have been employed, for example video recordings, participant observations, field notes and interviews in conjunction with the discussions. The analysis clarifies that the three groups developed their deliberation as the discussions about the joint assignment proceeded, and that most of the nine students furthermore expressed at least an openness towards a deliberative attitude for further discussions in the future. The disruptive behaviours mentioned in connection with the analytical model that could be identified in the discussions, for example interruptions and private conversations, proved not to constitute real disturbances; on the contrary they actually contributed towards the discussions developing, enabling them to continue. On the other hand, other and not previously identified disturbances occurred, for example a focus on grades, the lack of time and lacking language ability, which all in different ways affected the students’ attitudes towards their work. For any future didactical work on deliberative discourse in Swedish as a second language within higher education, these disturbances would need to be highlighted and made aware of for both teachers and students. Keywords: higher education didactics, communication, deliberative discourse, deliberative attitude, John Dewey, Tomas Englund, heterogeneity, ethnographic data collection methods.

Perceptions of the role of the man in family planning, during pregnancy and childbirth : A qualitative study with fifteen Nepali men

Introduction: In Nepal, by tradition, family life and marriage are generally controlled by patriarchal norms, sanctions, values and gender differences. Women in Nepal have limited possibilities to make decisions regarding their sexual and reproductive health, as the husbands and other elders in the family make most of the decisions regarding family planning, pregnancy and childbirth. Aim: To describe the perceptions of Nepali men regarding the role of the man with respect to family planning, pregnancy and childbirth. Methods: A qualitative study was conducted with 15 Nepali men in both urban and rural areas. The material was analyzed through inductive content analysis. Findings: One main category and two generic categories were identified. One generic category contained six subcategories and the other five subcategories. The main category was labeled: “He leads – She follows” and the generic categories were labeled: “Supporting women in family planning, during pregnancy and childbirth” and “Withdrawal from supporting women in family planning, during pregnancy and childbirth”. Conclusion: The role of the Nepali men with respect to family planning, pregnancy and childbirth, was identified as a conflicted approach. This study highlights the importance of understanding the influence of culture and tradition when developing strategies for promoting sexual and reproductive health during family planning, pregnancy and childbirth among families in Nepal.