Cost-effective suppression and eradication of invasive predators

Introduced predators can have pronounced effects on naïve prey species; thus, predator control is often essential for conservation of threatened native species. Complete eradication of the predator, although desirable, may be elusive in budget-limited situations, whereas predator suppression is more feasible and may still achieve conservation goals. We used a stochastic predator-prey model based on a Lotka-Volterra system to investigate the cost-effectiveness of predator control to achieve prey conservation. We compared five control strategies: immediate eradication, removal of a constant number of predators (fixed-number control), removal of a constant proportion of predators (fixed-rate control), removal of predators that exceed a predetermined threshold (upper-trigger harvest), and removal of predators whenever their population falls below a lower predetermined threshold (lower-trigger harvest). We looked at the performance of these strategies when managers could always remove the full number of predators targeted by each strategy, subject to budget availability. Under this assumption immediate eradication reduced the threat to the prey population the most. We then examined the effect of reduced management success in meeting removal targets, assuming removal is more difficult at low predator densities. In this case there was a pronounced reduction in performance of the immediate eradication, fixed-number, and lower-trigger strategies. Although immediate eradication still yielded the highest expected minimum prey population size, upper-trigger harvest yielded the lowest probability of prey extinction and the greatest return on investment (as measured by improvement in expected minimum population size per amount spent). Upper-trigger harvest was relatively successful because it operated when predator density was highest, which is when predator removal targets can be more easily met and the effect of predators on the prey is most damaging. This suggests that controlling predators only when they are most abundant is the "best" strategy when financial resources are limited and eradication is unlikely. © 2008 Society for Conservation Biology.

Effects of microstructure on long and short crack growth in nickel base superalloys

The use of engineering materials in critical applications necessitates the accurate prediction of component lifetime for inspection and renewal purposes. In fatigue limited situations, it is necessary to be able to predict the growth rates of cracks from initiation at a defect through to final fracture. To this end, fatigue crack growth data are presented for different microstructures of typical nickel base superalloys used in gas turbine engines. Crack growth behaviour throughout the life history of the crack, i.e. from the short crack through to the long crack propagation regime, is described for each microstructural condition and discussed in terms of current theories of fatigue crack propagation.

Sorghum Crop Modeling and Its Utility in Agronomy and Breeding

Crop models are simplified mathematical representations of the interacting biological and environmental components of the dynamic soil–plant–environment system. Sorghum crop modeling has evolved in parallel with crop modeling capability in general, since its origins in the 1960s and 1970s. Here we briefly review the trajectory in sorghum crop modeling leading to the development of advanced models. We then (i) overview the structure and function of the sorghum model in the Agricultural Production System sIMulator (APSIM) to exemplify advanced modeling concepts that suit both agronomic and breeding applications, (ii) review an example of use of sorghum modeling in supporting agronomic management decisions, (iii) review an example of the use of sorghum modeling in plant breeding, and (iv) consider implications for future roles of sorghum crop modeling. Modeling and simulation provide an avenue to explore consequences of crop management decision options in situations confronted with risks associated with seasonal climate uncertainties. Here we consider the possibility of manipulating planting configuration and density in sorghum as a means to manipulate the productivity–risk trade-off. A simulation analysis of decision options is presented and avenues for its use with decision-makers discussed. Modeling and simulation also provide opportunities to improve breeding efficiency by either dissecting complex traits to more amenable targets for genetics and breeding, or by trait evaluation via phenotypic prediction in target production regions to help prioritize effort and assess breeding strategies. Here we consider studies on the stay-green trait in sorghum, which confers yield advantage in water-limited situations, to exemplify both aspects. The possible future roles of sorghum modeling in agronomy and breeding are discussed as are opportunities related to their synergistic interaction. The potential to add significant value to the revolution in plant breeding associated with genomic technologies is identified as the new modeling frontier.

Critical pedagogy theory and the family business

In contemporary times family business research has been dominated by three theoretical perspectives; principal-agent theory, stewardship theory, and resource-based view theory (Siebels 2012) but at the same time scholars argue that what still needs further attention is how underlying processes and phenomena can be explained (Melin, Nordqvist & Sharma  2014). In order to understand themes such as repression or relations of asymmetry the suggestion in this chapter is to move towards a critical stance of thinking which involves problematizing the obvious issues in family firms (Alvesson & Deetz 2000) and moreover allowing the critical perspective to destabilize assumptions made within earlier research (Freire, 1974). By discussing critical theory in general but foremost the Freirean  (1970, 1974) critical pedagogy specifically, the arguments in the chapter revolves around how critical pedagogy can open up for a more novel view on family business. The purpose is via critical pedagogy discuss family business from a limited situation perspective, and to argue for a Freirean (1970) dialogue as means of developing a critical consciousness for family members in the family business context. The chapter concludes with some recommendations on platforms or common grounds in which dialogue and raising of consciousness can occur in which the concept can open up possibilities for interesting learning transfer and bring multidimensional knowledge into the family firm.

Moving from theory to praxis on the fly: Introducing a salutogenic method to expedite mental health care provision in disaster situations

Not a lot is known about most mental illness. Its triggers can rarely be established and nor can its aetiological dynamics, so it is hardly surprising that the accepted treatments for most mental illnesses are really strategies to manage the most overt symptoms. But with such a dearth of knowledge, how can worthy decisions be made about psychiatric interventions, especially given time and budgetary restrictions? This paper introduces a method, extrapolated from Salutogenics; the psycho-social theory of health introduced by Antonovsky in 1987. This method takes a normative stance (that psychiatric health care is for the betterment of psychiatric patients), and applies it to any context where there is a dearth of workable knowledge. In lieu of guiding evidence, the method identifies reasonable alternatives on the fly, enabling rational decisions to be made quickly with limited resources.

Expert Identity in Development of Core-Task-Oriented Working Practices for Mastering Demanding Situations

The point of departure in this dissertation was the practical safety problem of unanticipated, unfamiliar events and unexpected changes in the environment, the demanding situations which the operators should take care of in the complex socio-technical systems. The aim of this thesis was to increase the understanding of demanding situations and of the resources for coping with these situations by presenting a new construct, a conceptual model called Expert Identity (ExId) as a way to open up new solutions to the problem of demanding situations and by testing the model in empirical studies on operator work. The premises of the Core-Task Analysis (CTA) framework were adopted as a starting point: core-task oriented working practices promote the system efficiency (incl. safety, productivity and well-being targets) and that should be supported. The negative effects of stress were summarised and the possible countermeasures related to the operators' personal resources such as experience, expertise, sense of control, conceptions of work and self etc. were considered. ExId was proposed as a way to bring emotional-energetic depth into the work analysis and to supplement CTA-based practical methods to discover development challenges and to contribute to the development of complex socio-technical systems. The potential of ExId to promote understanding of operator work was demonstrated in the context of the six empirical studies on operator work. Each of these studies had its own practical objectives within the corresponding quite broad focuses of the studies. The concluding research questions were: 1) Are the assumptions made in ExId on the basis of the different theories and previous studies supported by the empirical findings? 2) Does the ExId construct promote understanding of the operator work in empirical studies? 3) What are the strengths and weaknesses of the ExId construct? The layers and the assumptions of the development of expert identity appeared to gain evidence. The new conceptual model worked as a part of an analysis of different kinds of data, as a part of different methods used for different purposes, in different work contexts. The results showed that the operators had problems in taking care of the core task resulting from the discrepancy between the demands and resources (either personal or external). The changes of work, the difficulties in reaching the real content of work in the organisation and the limits of the practical means of support had complicated the problem and limited the possibilities of the development actions within the case organisations. Personal resources seemed to be sensitive to the changes, adaptation is taking place, but not deeply or quickly enough. Furthermore, the results showed several characteristics of the studied contexts that complicated the operators' possibilities to grow into or with the demands and to develop practices, expertise and expert identity matching the core task. They were: discontinuation of the work demands, discrepancy between conceptions of work held in the other parts of organisation, visions and the reality faced by the operators, emphasis on the individual efforts and situational solutions. The potential of ExId to open up new paths to solving the problem of the demanding situations and its ability to enable studies on practices in the field was considered in the discussion. The results were interpreted as promising enough to encourage the conduction of further studies on ExId. This dissertation proposes especially contribution to supporting the workers in recognising the changing demands and their possibilities for growing with them when aiming to support human performance in complex socio-technical systems, both in designing the systems and solving the existing problems.

Feasibility of assimilating ASCAT surface winds into a Limited Area Model

Sea-surface wind observations of previous generation scatterometers have been successfully assimilated into Numerical Weather Prediction (NWP) models. Impact studies conducted with these assimilation implementations have shown a distinct improvement to model analysis and forecast accuracies. The Advanced Scatterometer (ASCAT), flown on Metop-A, offers an improved sea-surface wind accuracy and better data coverage when compared to the previous generation scatterometers. Five individual case studies are carried out. The effect of including ASCAT data into High Resolution Limited Area Model (HIRLAM) assimilation system (4D-Var) is tested to be neutral-positive for situations with general flow direction from the Atlantic Ocean. For northerly flow regimes the effect is negative. This is later discussed to be caused by problems involving modeling northern flows, and also due to the lack of a suitable verification method. Suggestions and an example of an improved verification method is presented later on. A closer examination of a polar low evolution is also shown. It is found that the ASCAT assimilation scheme improves forecast of the initial evolution of the polar low, but the model advects the strong low pressure centre too fast eastward. Finally, the flaws of the implementation are found small and implementing the ASCAT assimilation scheme into the operational HIRLAM suite is feasible, but longer time period validation is still required.

Neural network approach for fault location in unbalanced distribution networks with limited measurements

This paper presents an Artificial Neural Network (ANN) approach for locating faults in distribution systems. Different from the traditional Fault Section Estimation methods, the proposed approach uses only limited measurements. Faults are located according to the impedances of their path using a Feed Forward Neural Networks (FFNN). Various practical situations in distribution systems, such as protective devices placed only at the substation, limited measurements available, various types of faults viz., three-phase, line (a, b, c) to ground, line to line (a-b, b-c, c-a) and line to line to ground (a-b-g, b-c-g, c-a-g) faults and a wide range of varying short circuit levels at substation, are considered for studies. A typical IEEE 34 bus practical distribution system with unbalanced loads and with three- and single- phase laterals and a 69 node test feeder with different configurations are considered for studies. The results presented show that the proposed approach of fault location gives close to accurate results in terms of the estimated fault location.

A resource limited artificial immune system for data analysis.

Timmis J and Neal M J. A resource limited artificial immune system for data analysis. In Proceedings of ES2000 - Research and Development of Intelligent Systems, pages 19-32, Cambrige, U.K., 2000. Springer.

Working with the complexities of adolescent mental health problems: applying Time‐limited Adolescent Psychodynamic Psychotherapy (TAPP)

This article discusses the application in a CAMHS setting of a distinctive intervention for adolescent mental health difficulties, Time‐limited Adolescent Psychodynamic Psychotherapy (TAPP). TAPP has been developed specifically for working with adolescents and the characteristic developmental and psychosocial complexities they present to mental health services. It is widely recognised that supporting the developmental process in adolescence is central to therapeutic interventions and the therapeutic aim of TAPP is to enable recovery of the capacity to meet developmental challenges. The key factors of TAPP are described, including the formulation and working with a developmental focus, the therapeutic stance, working with transference and counter‐transference, working with time limits, and the emphasis on engagement of adolescents in therapy in TAPP. The experiences of introducing and developing TAPP in the CAMHS service are discussed with two brief and one extended case examples and this leads to a discussion of the kinds of outcomes achieved. It is concluded that TAPP is a key and relevant intervention for adolescents in complex and vulnerable situations; further work will be undertaken to continue its application in these settings and to formally assess outcomes.

Waste collection routing-limited multiple landfills and heterogeneous fleet

This article deals with a real-life waste collection routing problem. To efficiently plan waste collection, large municipalities may be partitioned into convenient sectors and only then can routing problems be solved in each sector. Three diverse situations are described, resulting in three different new models. In the first situation, there is a single point of waste disposal from where the vehicles depart and to where they return. The vehicle fleet comprises three types of collection vehicles. In the second, the garage does not match any of the points of disposal. The vehicle is unique and the points of disposal (landfills or transfer stations) may have limitations in terms of the number of visits per day. In the third situation, disposal points are multiple (they do not coincide with the garage), they are limited in the number of visits, and the fleet is composed of two types of vehicles. Computational results based not only on instances adapted from the literature but also on real cases are presented and analyzed. In particular, the results also show the effectiveness of combining sectorization and routing to solve waste collection problems.

Components Separation Technique With Limited Subcutaneous Undermining A Cadaver Study

The purpose of this study is to evaluate the influence of the undermining of the subcutaneous tissue on the tension of the abdominal wall, after the components separation of the abdominal muscles. Twenty adult cadavers were studied. The resistance of the medial advancement of both anterior and posterior recti sheaths was represented by the traction index and measured in 2 levels-3 cm above and 2 cm below the umbilicus. Traction indices were compared in the following 3 consecutive dissection situations: (1) after the subcutaneous tissue undermining laterally to the semilunaris line; (2) after the dissection of the rectus muscle from its posterior sheath associated with the release of the external oblique muscle; (3) after the subcutaneous tissue undermining laterally to the anterior axillary line. Friedman and Spearman tests were used to compare the results. There was no statistical significant difference between the subcutaneous tissue undermining laterally to the semilunaris line and that laterally to the anterior axillary line, when associated with the musculoaponeurotic dissections. In conclusion, limited subcutaneous undermining does not influence the tension of closure of the musculoaponeurotic layer after the components separation technique in cadavers.

On energy harvesting form time-limited excitations: simulations and case study

Linear resonant harvesters have been the most common type of generators used to scavenge energy from mechanical vibrations. When subject to harmonic excitation, good performance is achieved once the device is tuned so that its natural frequency coincides with the excitation frequency. In such a situation, the average power harvested in a cycle is proportional to the cube of the excitation frequency and inversely proportional to the suspension damping, which is sought to be very low. However, a very low damping involves a relatively long transient in the system response, where the classical formulation adopted for steady-state regimes do not hold. This paper presents an investigation into the design of a linear resonant harvester to scavenge energy from time-limited harmonic excitations involving a transient response, which could be more likely in some practical situations. An application is presented considering train-induced vibrations.

Fondaparinux - data on efficacy and safety in special situations

New anticoagulants promise to have better efficacy, more safety and/or a better manageability than traditional anticoagulants. However, knowledge is limited regarding special situations such as renal insufficiency, obesity, pregnancy, long-term therapy, heparin-induced thrombocytopenia, treatment in patients with mechanical heart valves, use for children, and in patients with a high risk of thromboembolic complications. These situations have rarely or even never been the objective of randomised controlled trials. The purpose of the present article is to summarize and discuss available data on efficacy and safety in these special situations for one of the first new anticoagulants, the indirect factor-Xa inhibitor fondaparinux. Furthermore, we discuss safety in licensed indications and management of bleeding complications and comment on measuring of drug concentration in plasma.

Effects of increased CO2 concentration on nutrient limited coastal summer plankton depend on temperature

Increasing seawater temperature and CO2 concentrations both are expected to increase coastal phytoplankton biomass and carbon to nutrient ratios in nutrient limited seasonally stratified summer conditions. This is because temperature enhances phytoplankton growth while grazing is suggested to be reduced during such bottom-up controlled situations. In addition, enhanced CO2 concentrations potentially favor phytoplankton species, that otherwise depend on costly carbon concentrating mechanisms (CCM). The trophic consequences for consumers under such conditions, however, remain little understood. We set out to experimentally explore the combined effects of increasing temperature and CO2 concentration for phytoplankton biomass and stoichiometry and the consequences for trophic transfer (here for copepods) on a natural nutrient limited Baltic Sea summer plankton community. The results show, that warming effects were translated to the next trophic level by switching the system from a bottom-up controlled to a mainly top-down controlled one. This was reflected in significantly down-grazed phytoplankton and increased zooplankton abundance in the warm temperature treatment (22.5°C). Additionally, at low temperature (16.5°C) rising CO2 concentrations significantly increased phytoplankton biomass. The latter effect however, was due to direct negative impact of CO2 on copepod nauplii which released phytoplankton from grazing in the cold but not in the warm treatments. Our results suggest that future seawater warming has the potential to switch trophic relations between phytoplankton and their grazers under nutrient limited conditions with the consequence of potentially disguising CO2 effects on coastal phytoplankton biomass.