14 resultados para Liliopsida
Resumo:
(Pólen de Magnoliopsida (Asteridae) e Liliopsida do perfil sedimentar de uma turfeira em São Francisco de Paula, Planalto Leste do Rio Grande do Sul, Sul do Brasil). O trabalho tem por finalidade fornecer material de referência para pesquisas paleopalinológicas no sul do Brasil através da análise do perfil sedimentar de uma turfeira do Planalto Leste do Rio Grande do Sul. São apresentados os grãos de pólen de Asteridae, Alismatidae, Commelinidae e Liliidae. O perfil possui 286 cm de comprimento correspondendo, aproximadamente, aos últimos 25.000 anos. O processamento químico das 22 amostras obtidas seguiu o método padrão e a análise foi feita em microscopia óptica. As descrições morfológicas, incluindo medidas dos eixos polar e equatorial, são acompanhadas de fotomicrografias e dados ecológicos do esporófito de origem. Foram identificados grãos correspondentes a 21 Asteridae, uma Alismatidae, quatro Commelinidae, três Liliidae e mais três grãos de pólen indeterminados de Angiospermas.
Resumo:
Lianas are characteristic, abundant and ecologically important members of tropical forest but they have been neglected in floristics and phytossociological studies. This work presents a floristic survey of the lianas species at Estação Ecológica do Noroeste Paulista (EENP), and a comparison of the list of species recorded in this work with those reported for other fragments of São Paulo state. The EENP (20º48'36'' S and 49º22'50'' W) is at 468 m of altitude and comprises an area of 168,43 ha, divided into three fragments of vegetation. Samples of lianas were collected in the interior and along the edges of the forest fragments. It was identified 105 species: 99 Magnoliopsida (60 genera and 22 families); six Liliopsida (three genera and three families). The richest families in species comprised 59% of the total of lianas sampled. The dendrogram of similarity showed a low similarity between the forest situated in the littoral (Atlantic Forest) and those located in the interior of the state of São Paulo. Some other authors, also analysing the similarity of forest of the interior and Atlantic Forest of São Paulo state, but considering only the trees reported similar result.
Resumo:
Este trabalho foi desenvolvido em uma floresta semidecídua na Estação Ecológica de Paulo de Faria, no norte do estado de São Paulo, situada na margem esquerda do rio Grande (19°58S e 49°32W) e com área de 435,73 ha. O clima caracteriza-se por apresentar duas estações climáticas, uma seca de abril a setembro (média pluviométrica de 167 mm) e outra chuvosa, de outubro a março (média de 978 mm). O solo pertence a unidade taxonômica Latossolo Roxo, é predominantemente originário dos sedimentos neocretáceos da formação Bauru, com relevo suave, ondulado e razoavelmente uniforme. A floresta em estudo foi dividida em três estações de coletas, onde o levantamento florístico foi realizado através de caminhadas por toda a extensão das mesmas. Foram identificadas 201 espécies, distribuídas em 149 gêneros e 60 famílias, sendo 187 de Magnoliopsida, 10 de Liliopsida e 4 de Pteridophyta. As famílias que apresentaram maior número de espécies foram Leguminosae (14,42%), Bignoniaceae (6,00%), Euphorbiaceae (6,00%) e Apocynaceae (3,50%). Foi observada baixa similaridade florística entre a floresta em questão e aquelas incluídas em outros estudos.
Resumo:
O estudo das epífitas vasculares foi realizado em uma área de 3.000 m² de floresta na planície litorânea na Ilha do Mel (25°30 S 48°23 W); o levantamento qualitativo foi realizado em toda a área; para o estudo quantitativo, foram sorteados 100 forófitos, divididos em intervalos de 2 m a partir do solo. Em cada intervalo, registraram-se todas as espécies epifíticas ocorrentes, sendo estimado o valor de importância epifítico a partir das freqüências nos estratos, nos forófitos e nas espécies forofíticas. No levantamento total, foram encontradas 77 espécies (16 de Pteridophyta, 53 de Liliopsida e 8 de Magnoliopsida), das quais 70 foram amostradas nos forófitos analisados. As famílias mais ricas foram Orchidaceae, Bromeliaceae e Polypodiaceae e os gêneros foram Vriesea, Encyclia e Maxillaria. A área com maior similaridade florística com este estudo localiza-se no Município de Torres (RS). As espécies mais importantes quantitativamente foram Microgramma vaccinifolia, Codonanthe gracilis, Epidendrum latilabre e E. rigidum. As espécies amostradas foram agrupadas em três categorias quanto à preferência por intervalos de altura: exclusivas, preferenciais e indiferentes. O número de ocorrências de epífitos em um mesmo forófito variou de 1 a 35, enquanto o número de espécies variou de 1 a 21 (médias 14 ± 7,6 e 10 ± 4,6, respectivamente). Os primeiros estratos (0-2 m, 2-4 m e 4-6 m) foram os mais ricos em espécies epifíticas. As espécies forofíticas com maior número de ocorrências foram Andira fraxinifolia e Ternstroemia brasiliensis, e com maior número de espécies Ocotea pulchella e Guapira opposita. Quanto à fidelidade sobre espécies forofíticas, foram encontradas espécies epifíticas exclusivas, preferenciais e generalistas, esta incluindo a maioria das espécies amostradas.
Resumo:
O estudo das epífitas vasculares foi realizado em floresta ombrófila mista aluvial do rio Barigüi, município de Araucária (25º34' S e 49º20' W); o levantamento qualitativo foi realizado em uma área aproximada de 8,6 ha. Para o estudo quantitativo foram sorteados 110 forófitos, divididos em três estratos (fuste baixo, fuste alto e copa). Em cada estrato foram atribuídas notas de abundância para as espécies epifíticas ocorrentes. No levantamento florístico foram encontradas 49 espécies (16 de Pteridophyta, 23 de Liliopsida e 10 de Magnoliopsida), das quais 34 foram observadas na amostragem quantitativa. As famílias e gêneros mais ricos foram: Orchidaceae, Polypodiaceae e Bromeliaceae, e Pleurothallis, Tillandsia e Oncidium. As áreas de maior similaridade florística com este estudo localizam-se no município de Curitiba (PR). As espécies mais importantes quantitativamente foram Microgramma squamulosa (Kaulf.) de la Sota, Pleopeltis angusta Humb. & Bonpl. ex Kunth, Peperomia catharinae Miq. e Polypodium hirsutissimum Raddi. Em um mesmo forófito, o número de espécies ocorrentes variou de zero a 13, enquanto a soma das notas de abundância para as epífitas variou de zero a 24. A copa apresentou a maior abundância de epífitos, seguido do fuste alto e do fuste baixo.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Lianas são membros característicos das florestas tropicais, onde são abundantes e de grande importância ecológica. Entretanto, têm sido negligenciadas em estudos florísticos e fitossociológicos. Este trabalho apresenta as espécies de lianas da Estação Ecológica do Noroeste Paulista (EENP) e as compara àquelas encontradas em outros fragmentos florestais. A EENP (20º48'36'' S e 49º22'50'' W) está a 468 m de altitude e abrange área de 168,63 ha, composta de três fragmentos de vegetação descontínua, classificada como floresta estacional semidecidual, entremeadas por pastagens. As amostras de lianas foram coletadas realizando caminhadas na periferia e no interior da mata. Foram identificadas 105 espécies; delas, 99 são Magnoliopsida (60 gêneros e 22 famílias); e seis, Liliopsida (três gêneros e três famílias). As famílias mais ricas em espécies representaram 59% do total das lianas. A análise do dendrograma de similaridade mostrou que esta é baixa entre a Floresta Atlântica de São Paulo e aquelas localizadas no interior. Situação semelhante foi observada por outros autores na análise de similaridade com espécies de porte arbóreo, e também, entre florestas do interior e Floresta Atlântica.
Resumo:
Mature leaf fragments from eight species of Xyris from the Serra do Cipo, State of Minas Gerais, Brazil, were prepared by the usual methods for electron microscopy. Ultrastructural analysis of phloem shows the occurrence of nacreous walls with a polylamellate structure in the sieve-elements of X. tortilis and plastids similar to P-plastids, form PIIcf in the sieve-elements of all investigated species.
Resumo:
The simultaneous existence of alternative oxidases and uncoupling proteins in plants has raised the question as to why plants need two energy-dissipating systems with apparently similar physiological functions. A probably complete plant uncoupling protein gene family is described and the expression profiles of this family compared with the multigene family of alternative oxidases in Arabidopsis thaliana and sugarcane (Saccharum sp.) employed as dicot and monocot models, respectively. In total, six uncoupling protein genes, AtPUMP1-6, were recognized within the Arabidopsis genome and five (SsPUMP1-5) in a sugarcane EST database. The recombinant AtPUMP5 protein displayed similar biochemical properties as AtPUMP1. Sugarcane possessed four Arabidopsis AOx1-type orthologues (SsAOx1a-1d); no sugarcane orthologue corresponding to Arabidopsis AOx2-type genes was identified. Phylogenetic and expression analyses suggested that AtAOx1d does not belong to the AOx1-type family but forms a new (AOx3-type) family. Tissue-enriched expression profiling revealed that uncoupling protein genes were expressed more ubiquitously than the alternative oxidase genes. Distinct expression patterns among gene family members were observed between monocots and dicots and during chilling stress. These findings suggest that the members of each energy-dissipating system are subject to different cell or tissue/organ transcriptional regulation. As a result, plants may respond more flexibly to adverse biotic and abiotic conditions, in which oxidative stress is involved. © The Author [2006]. Published by Oxford University Press [on behalf of the Society for Experimental Biology]. All rights reserved.
Resumo:
• Background and Aims: Eriocaulaceae (Poales) is currently divided in two subfamilies: Eriocauloideae, which comprises two genera and Paepalanthoideae, with nine genera. The floral anatomy of Actinocephalus polyanthus, Leiothrix fluitans, Paepalanthus chlorocephalus, P. flaccidus and Rondonanthus roraimae was studied here. The flowers of these species of Paepalanthoideae are unisexual, and form capitulum-type inflorescences. Staminate and pistillate flowers are randomly distributed in the capitulum and develop centripetally. This work aims to establish a floral nomenclature for the Eriocaulaceae to provide more information about the taxonomy and phylogeny of the family. • Methods: Light microscopy, scanning electron microscopy and chemical tests were used to investigate the floral structures. • Key Results: Staminate and pistillate flowers are trimerous (except in P. flaccidus, which presents dimerous flowers), and the perianth of all species is differentiated into sepals and petals. Staminate flowers present an androecium with scale-like staminodes (not in R. roraimae) and fertile stamens, and nectariferous pistillodes. Pistillate flowers present scale-like staminodes (except for R. roraimae, which presents elongated and vascularized staminodes), and a gynoecium with a hollow style, ramified in stigmatic and nectariferous portions. • Conclusions: The scale-like staminodes present in the species of Paepalanthoideae indicate a probable reduction of the outer whorl of stamens present in species of Eriocauloideae. Among the Paepalanthoideae genera, Rondonanthus, which is probably basal, shows vascularized staminodes in their pistillate flowers. The occurrence of nectariferous pistillodes in staminate flowers and that of nectariferous portions of the style in pistillate flowers of Paepalanthoideae are emphasized as nectariferous structures in Eriocaulaceae. © The Author 2006. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved.
Resumo:
The floral anatomy of Cephalostemon, Monotrema, Rapatea, Spathanthus, and Stegolepis was studied for taxonomic purposes. All species studied share colleters between the floral parts; sepals, petals, anthers, and style covered by an ornamented cuticle; short epidermal cells with sinuous walls on the abaxial surface of the petals; tetrasporangiate anthers with phenolic idioblasts in the epidermis; endothecium with spiral thickenings; incompletely septate ovary; and anatropous, bitegmic ovules. The floral anatomy is useful not only for characterizing the family, but also for delimiting the subfamilies and genera. Sepals with silica bodies in the epidermal cells; mature anther wall composed of epidermis, endothecium, and middle layer; absence of phenolic idioblasts in the sepals, filaments, and ovary; and stylar epidermal cells with thickened external periclinal wall support Rapateoideae. Cephalostemon and Rapatea show a great number of similarities, corroborating their close relationship indicated in the phylogenetic analyses of the family. Monotrema shares few characters with the genera of Rapateoideae, corroborating its placement in Monotremoideae. Stegolepis shows several distinctive characters, probably related to the greater diversity found in this genus. © 2012 Springer-Verlag Wien.
Resumo:
En Cuba, las arvenses que afectan al cultivo de la caña de azúcar son una de las causas fundamentales de los bajos rendimientos agrícolas y su control constituye unas de las principales partidas de gastos. En general, se aplican los herbicidas, así como otros métodos de control, sin tener en cuenta el tipo de suelo y las características de estas plantas. Sobre el manejo de arvenses no existen trabajos de investigación que aborden aspectos de eficiencia energética de las producciones y daños al ambiente. Por lo antes señalado, el objetivo de esta investigación fue evaluar diversas tecnologías de manejo de arvenses en el cultivo de la caña de azúcar (Saccharum spp. híbrido), en cepas de primavera y retoño, en tres tipos de suelos, con el propósito de obtener producciones sustentables. El área de estudio se localizó en los campos de la Empresa Azucarera del municipio “Majibacoa”, provincia de Las Tunas (oriente de Cuba), que posee condiciones edafoclimáticas que abundan a lo largo del país. Los tres tipos de suelos más representativos son Fersialítico Pardo Rojizo ócrico, Pardo Mullido y Vertisol Crómico gléyco. En dicha área se han identificado 31 especies de arvenses, 16 de la clase Liliopsida y 15 de la Magnoliopsida. En un primer grupo de experimentos, se desarrollaron nueve ensayos de campo para evaluar la efectividad de herbicidas y mezclas de estos en el manejo de arvenses en el cultivo de la caña de azúcar, tanto en cepas de primavera como de retoño, en los tres tipos de suelos. Se establecieron parcelas de 80 m2 distribuidas en bloques al azar con cuatro réplicas. La efectividad se evaluó por medio del porcentaje de cobertura por arvenses y la fitotoxicidad provocada a las plantas de caña, teniendo en cuenta el coste asociado a cada tratamiento. En aplicaciones preemergentes en caña planta de primavera, el herbicida más eficiente fue el Isoxaflutole con dosis de 0,15; 0,20 y 0,25 kg.ha-1 de producto comercial (pc) en los suelos Fersialítico, Pardo y Vertisol respectivamente. En aplicaciones postemergentes tempranas la mezcla más eficiente fue la de Isoxaflutole + Ametrina +2,4-D con las dosis de Isoxaflutole citadas anteriormente. En aplicaciones preemergentes en cepa de retoño, el herbicida más eficiente fue el Isoxaflutole a dosis de 0,20 kg.ha-1 pc para el suelo Fersialítico y a 0,25 kg.ha-1 pc para los suelos Pardo y Vertisol. En un segundo grupo, se realizaron seis ensayos de campo distribuidos en dos fases. En la primera fase, se desarrollaron tres experimentos, uno por cada tipo de suelo, para evaluar la eficiencia de nueve tecnologías de manejo de arvenses (químicas y físicas combinadas) en cepa de primavera de caña de azúcar. En la siguiente fase, los tres ensayos restantes (uno por tipo de suelo) evaluaron tecnologías de manejo de arvenses durante dos ciclos de producción de caña de azúcar (etapa de primavera y retoño). En la etapa de primavera se aplicó la tecnología más eficiente de los tres experimentos anteriores y durante la etapa de retoño se evaluaron otras nueve tecnologías propias de este tipo de cepa. En estos experimentos los diferentes tratamientos se aplicaron en franjas distribuidas al azar con cuatro réplicas. En las tecnologías evaluadas se emplearon los herbicidas y mezclas que resultaron más eficientes en el primer grupo de experimentos. En cada caso, se evaluaron la eficiencia energética de la producción de azúcar y otros derivados, la resistencia a la penetración de los suelos, la carga contaminante hacia la atmósfera producto de la combustión del diésel y los beneficios al aplicar las diferentes tecnologías. En la primera fase (cepa de primavera), la tecnología con mejor resultado fue la aplicación preemergente de Isoxaflutole inmediatamente después de la plantación, seguida de descepe químico con Glufosinato de amonio, más labor con grada múltiple aproximadamente a los 80 días de la plantación y aplicación pre-cierre con Glufosinato de amonio. En la segunda fase (dos ciclos del cultivo), el mejor resultado se obtuvo cuando en la etapa de retoño se realizó una aplicación preemergente de Isoxaflutole, descepe químico con Glufosinato de amonio y aplicación pre-cierre con este mismo herbicida. En los tres tipos de suelos durante los dos ciclos, la eficiencia energética tuvo valores de 7,2 - 7,5, la resistencia a la penetración 1,2 - 1,5 MPa, la carga contaminante hacia la atmósfera fue de 63,3 - 64,9 kg.t-1 de caña cosechada y beneficios de 8.324 - 8.455 pesos cubanos por hectárea. Este estudio demuestra que un control eficiente de las arvenses debe tener en cuenta necesariamente el tipo de suelo. Así, en los Vertisoles, con mayor contenido en arcilla, se requieren mayores dosis de Isoxaflutole y la eficiencia energética de la producción es menor. La persistencia de ciertas arvenses, especialmente de la clase Liliopsida, requiere de un manejo integrado que incluya diferentes tipos de herbicidas. ABSTRACT In Cuba, weeds affecting the sugarcane are one of the main causes of low agricultural yields, and their control constitutes some of the main items of expenditure. In general, herbicides are applied, as well as other control methods, without keeping in mind the soil type and the characteristics of these plants. Moreover, weed control research approaching aspects about energy efficiency of the crop production, and environmental damages are missing. Hence, the objective of this investigation was to evaluate diverse technologies of weed handling in sugarcane (Saccharum spp. hybrid), both in spring cane plant and ratoon, in three types of soils, with the purpose of obtaining sustainable productions. The study area was located in the fields of the Sugar Enterprise of the Municipality "Majibacoa”, Las Tunas province (east of Cuba) that possesses ecological conditions that are plentiful along the country. The three more representative types of soils are Fersialitic, Brown, and Vertisol. In this area 31 weeds species have been identified, 16 of the Class Liliopsida and 15 of the Magnoliopsida. In a first group of experiments, nine field rehearsals were developed to evaluate the effectiveness of herbicides and mixtures of these for weed handling in sugarcane, in spring cane plants as well as in ratoon, in the three types of soils. Plots of 80 m-2 were distributed at random blocks with four replications. The effectiveness was evaluated by means of the covering percentage by weeds and the provoked toxicity to the cane plants, keeping in mind the cost associated to each treatment. In preemergence applications in spring cane plant, the most efficient herbicide was the Isoxaflutole with dose of 0.15; 0.20 and 0.25 kg.ha-1 of commercial product (pc) in the soils Fersialítico, Brown and Vertisol respectively. In early postemergence applications the most efficient mixture was that of Isoxaflutole + Ametrina + 2,4-D with the doses of Isoxaflutole mentioned previously. In preemergence applications in ratoon, the most efficient herbicide was the Isoxaflutole at dose of 0.20 kg.ha-1 pc for the soil Fersialític and to 0.25 kg. ha-1 pc for the Brown soil and Vertisol. In a second group, six field rehearsals distributed in two phases were carried out. In the first phase, three experiments were developed, one for each soil type, to evaluate the efficiency of nine technologies of weed handling in spring cane plant. In the following phase, the three remaining rehearsals (one for each soil type) diverse technologies of weed handling were evaluated during two cycles of sugarcane production (spring stage and ratoon). In the spring stage the most efficient technology in the three previous experiments was applied and during ratoon stage other nine technologies were evaluated. In these experiments the different treatments were applied in fringes distributed at random with four replicas. In the evaluated technologies the herbicides and mixtures were used selecting those that were more efficient in the first group of experiments. In each case, the energy efficiency of the sugar production and other derivatives, the soil penetration resistance, the polluting load toward the atmosphere product of the combustion, and the benefits when applying the different technologies were all evaluated. In the first phase (spring cane plant), the technology with better result was the preemergence application of Isoxaflutole immediately after the plantation, followed by chemical eradication with Ammonia Glufosinate, hoeing work with multiple tier approximately to the 80 days of the plantation and pre-closing application with Ammonia Glufosinate. In the second phase (two cycles of the cultivation), the best result was obtained when a preemergence application of Isoxaflutole was carried out in sprout's stage, chemical eradication with Ammonia Glufosinate and pre-closing application with this same herbicide. In the three types of soils during the two cycles, the energy efficiency achieved values of 7.2 to 7.5, the resistance to the penetration 1.2 - 1.5 MPa, the polluting load toward the atmosphere was of 63.3 - 64.9 kg.t-1 of the harvested cane and the obtained benefits of 8,324 - 8,455 Cuban pesos per hectare. This study demonstrates that an efficient control of the weeds should necessarily keep in mind the soil type. This way, in the Vertisols, with more clay content, bigger dose of Isoxaflutole is required and the energy efficiency of the production is smaller. The persistence of certain weeds, especially of the class Liliopsida, requires of an integrated handling him to include different types of herbicides.