Effects of photoperiod on reproduction of Siamese fighting fish Betta splendens

This study investigated the effect of different photoperiods (24 h of light (L):0 h of darkness (D); 20L:4D; 16L:8D; 12L:12D; and 8L:16D) on the reproduction and growth of Betta splendens. The results showed that spawning frequency was significantly higher in couples reared under 16L:8D and 12L:12D, in comparison with other treatments. The highest number of eggs per spawn was obtained under 16L:8D (544.76±375.23) and 12L:12D (471.13±261.52), and the lowest values were detected for 24L:0D (128.55±58.14) and 20L:4D (187.87±103.84). Fertility and fecundity also showed significantly higher average values in 16L:8D and 12L:12D when compared with 24L:0D and 20L:4D treatments. Egg volume and perivitelline space were significantly higher in 24L:0D treatments that showed the lowest numbers of eggs per spawn, while the vitelline volume did not show significant differences. Other variables such as breeders weight gain and condition factor (K) were not statistically different. Moreover, the final length varies according to photoperiod and gender. These results demonstrated a key role for the photoperiod upon B. splendens reproduction. The best reproductive performance is achieved under the photoperiods that best approached those that occur in spring and summer (16L:8D and 12L:12D), coinciding with their best seasons for reproduction.

Fotoperíodo na reprodução de Betta splendens

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of rearing techniques and feed composition on productive traits, bird welfare and quality of poultry products

The PhD project was focused on the study of the poultry welfare conditions and improvements. The project work was divided into 3 main research activities. A) Field evaluation of chicken meat rearing conditions kept in intensive farms. Considering the lack of published reports concerning the overall Italian rearing conditions of broiler chickens, a survey was carried out to assess the welfare conditions of broiler reared in the most important poultry companies in Italy to verify if they are in accordance with the advices given in the European proposal COM (2005) 221 final. Chicken farm conditions, carcass lesions and meat quality were investigated. 1. The densities currently used in Italy are in accordance with the European proposal COM 221 final (2005) which suggests to keep broilers at a density lower than 30-32 kg live weight/m2 and to not exceed 38-40 kg live weight/m2. 2. The mortality rates in summer and winter agree with the mortality score calculated following the formula reported in the EU Proposal COM 221 final (2005). 3. The incidence of damaged carcasses was very low and did not seem related to the stocking density. 4. The FPD scores were generally above the maximum limit advised by the EU proposal COM 221 final (2005), although the stocking densities were lower than 30-32 kg live weight per m2. 5. It can be stated that the control of the environmental conditions, particularly litter quality, appears a key issue to control the onset of foot dermatitis. B) Manipulation of several farm parameters, such litter material and depth, stocking density and light regimen to improve the chicken welfare conditions, in winter season. 1. Even though 2 different stocking densities were established in this study, the performances achieved from the chickens were almost identical among groups. 2. The FCR was significantly better in Standard conditions contrarily to birds reared in Welfare conditions with lower stocking density, more litter material and with a light program of 16 hours light and 8 hours dark. 3. In our trial, in Standard groups we observed a higher content of moisture, nitrogen and ammonia released from the litter. Therefore it can be assumed that the environmental characteristics have been positively changed by the improvements of the rearing conditions adopted for Welfare groups. 4. In Welfare groups the exhausted litters of the pens were dryer and broilers showed a lower occurrence of FPD. 5. The prevalence of hock burn lesions, like FPD, is high with poor litter quality conditions. 6. The combined effect of a lower stocking density, a greater amount of litter material and a photoperiod similar to the natural one, have positively influenced the chickens welfare status, as a matter of fact the occurrence of FPD in Welfare groups was the lowest keeping the score under the European threshold of the proposal COM 221 final(2005). C) The purpose of the third research was to study the effect of high or low stocking density of broiler chickens, different types of litter and the adoption of short or long lighting regimen on broiler welfare through the evaluation of their productivity and incidence of foot pad dermatitis during the hot season. 1. The feed efficiency was better for the Low Density than for High Density broilers. 2. The appearance of FPD was not influenced by stocking density. 3. The foot examination revealed that the lesions occurred more in birds maintained on chopped wheat straw than on wood shaving. 4. In conclusion, the adoptions of a short light regimen similar to that occurring in nature during summer reduces the feed intake without modify the growth rate thus improving the feed efficiency. Foot pad lesion were not affected neither by stocking densities nor by light regimens whereas wood shavings exerted a favourable effect in preserving foot pad in good condition. D) A study was carried out to investigate more widely the possible role of 25-hydroxycholecalciferol supplemented in the diet of a laying hen commercial strain (Lohmann brown) in comparison of diets supplemented with D3 or with D3 + 25- hydroxycholecalciferol. Egg traits during a productive cycle as well as the bone characteristics of the layers have been as well evaluated to determine if there the vitamin D3 may enhance the welfare status of the birds. 1. The weight of the egg and of its components is often greater in hens fed a diet enriched with 25-hydroxycholecalciferol. 2. Since eggs of treated groups are heavier and a larger amount of shell is needed, a direct effect on shell strength is observed. 3. At 30 and at 50 wk of age hens fed 25 hydroxycholecalciferol exhibited greater values of bone breaking force. 4. Radiographic density values obtained in the trial are always higher in hens fed with 25-hydroxycholecalciferol of both treatments: supplemented for the whole laying cycle (25D3) or from 40 weeks of age onward (D3+25D3).

Utilização do ciclo luminoso como indutor do crescimento de camarões Penaeus japonicus

Dissertação de mest. em Aquacultura, Unidade de Ciências e Tecnologias dos Recursos Aquáticos, Univ. do Algarve, 1997

Effects of photoperiod on reproduction of Siamese fighting fish Betta splendens

This study investigated the effect of different photoperiods (24 h of light (L):0 h of darkness (D); 20L:4D; 16L:8D; 12L:12D; and 8L:16D) on the reproduction and growth of Betta splendens. The results showed that spawning frequency was significantly higher in couples reared under 16L:8D and 12L:12D, in comparison with other treatments. The highest number of eggs per spawn was obtained under 16L:8D (544.76±375.23) and 12L:12D (471.13±261.52), and the lowest values were detected for 24L:0D (128.55±58.14) and 20L:4D (187.87±103.84). Fertility and fecundity also showed significantly higher average values in 16L:8D and 12L:12D when compared with 24L:0D and 20L:4D treatments. Egg volume and perivitelline space were significantly higher in 24L:0D treatments that showed the lowest numbers of eggs per spawn, while the vitelline volume did not show significant differences. Other variables such as breeders weight gain and condition factor (K) were not statistically different. Moreover, the final length varies according to photoperiod and gender. These results demonstrated a key role for the photoperiod upon B. splendens reproduction. The best reproductive performance is achieved under the photoperiods that best approached those that occur in spring and summer (16L:8D and 12L:12D), coinciding with their best seasons for reproduction.

Improving daylighting performance of mirrored light pipes

This paper assesses and compares the performances of two daylight collection strategies, one passive and one active, for large-scale mirrored light pipes (MLP) illuminating deep plan buildings. Both strategies use laser cut panels (LCP) as the main component of the collection system. The passive system comprises LCPs in pyramid form, whereas the active system uses a tiled LCP on a simple rotation mechanism that rotates 360° in 24 hours. Performance is assessed using scale model testing under sunny sky conditions and mathematical modelling. Results show average illuminance levels for the pyramid LCP ranging from 50 to 250 lux and 150 to 200 lux for the rotating LCPs. Both systems improve the performance of a MLP. The pyramid LCP increases the performance of a MLP by 2.5 times and the rotating LCP by 5 times, when compared to an open pipe particularly for low sun elevation angles.

Experimental study of the mechanical properties of light gauge cold-formed steels at elevated temperatures

In recent times, light gauge cold-formed steel sections have been used extensively as primary load bearing structural members in many applications in the building industry. Fire safety design of structures using such sections has therefore become more important. Deterioration of mechanical properties of yield stress and elasticity modulus is considered the most important factor affecting the performance of steel structures in fires. Hence there is a need to fully understand the mechanical properties of light gauge cold-formed steels at elevated temperatures. A research project based on experimental studies was therefore undertaken to investigate the deterioration of mechanical properties of light gauge cold-formed steels. Tensile coupon tests were undertaken to determine the mechanical properties of these steels made of both low and high strength steels and thicknesses of 0.60, 0.80 and 0.95 mm at temperatures ranging from 20 to 800ºC. Test results showed that the currently available reduction factors are unsafe to use in the fire safety design of cold-formed steel structures. Therefore new predictive equations were developed for the mechanical properties of yield strength and elasticity modulus at elevated temperatures. This paper presents the details of the experimental study, and the results including the developed equations. It also includes details of a stress-strain model for light gauge cold-formed steels at elevated temperatures.