Concurrent validity of the Swedish version of the life-space assessment questionnaire

BACKGROUND: The Life-Space Assessment (LSA), developed in the USA, is an instrument focusing on mobility with respect to reaching different areas defined as life-spaces, extending from the room where the person sleeps to mobility outside one's hometown. A newly translated Swedish version of the LSA (LSA-S) has been tested for test-retest reliability, but the validity remains to be tested. The purpose of the present study was to examine the concurrent validity of the LSA-S, by comparing and correlating the LSA scores to other measures of mobility. METHOD: The LSA was included in a population-based study of health, functioning and mobility among older persons in Sweden, and the present analysis comprised 312 community-dwelling participants. To test the concurrent validity, the LSA scores were compared to a number of other mobility-related variables, including the Short Physical Performance Battery (SPPB) as well as "stair climbing", "transfers", "transportation", "food shopping", "travel for pleasure" and "community activities". The LSA total mean scores for different levels of the other mobility-related variables, and measures of correlation were calculated. RESULTS: Higher LSA total mean scores were observed with higher levels of all the other mobility related variables. Most of the correlations between the LSA and the other mobility variables were large (r = 0.5-1.0) and significant at the 0.01 level. The LSA total score, as well as independent life-space and assistive life-space correlated with transportation (0.63, 0.66, 0.64) and food shopping (0.55, 0.58, 0.55). Assistive life-space also correlated with SPPB (0.47). With respect to maximal life-space, the correlations with the mobility-related variables were generally lower (below 0.5), probably since this aspect of life-space mobility is highly influenced by social support and is not so dependent on the individual's own physical function. CONCLUSION: LSA was shown to be a valid measure of mobility when using the LSA total, independent LS or assistive LSA.

Les effets d’un Accompagnement-citoyen personnalisé d’intégration communautaire (APIC) sur les déplacements et l’espace perçu d’aînés en perte d’autonomie vivant à domicile

Déterminant d’un vieillissement actif et en santé, la mobilité permet aux aînés de maintenir et de développer des liens sociaux significatifs, et de demeurer intégrés dans leur communauté. Malgré ces bienfaits, les interventions offertes aux aînés visant à favoriser leurs déplacements restent rares et discontinues. Un accompagnement-citoyen personnalisé d’intégration communautaire (APIC) pourrait favoriser les déplacements et améliorer la perception des lieux des aînés en perte d’autonomie. Cette étude visait à : 1) vérifier les effets de l’APIC sur les déplacements et l’espace perçu des aînés en perte d’autonomie et 2) identifier les facilitateurs et les obstacles à l’utilisation de l’espace dans l’APIC. Un devis mixte incluant un dispositif pré-expérimental a été utilisé auprès de 16 participants (11 femmes) âgés entre 66 et 91 ans. Les déplacements ont été mesurés à l’aide du Life Space Assessment. Un entretien individuel semi-structuré d’environ 30 minutes a été réalisé 2 à 4 semaines après la fin de l’intervention. À la suite de l’APIC, les déplacements des participants se sont améliorés (p < 0,01). Selon les participants âgés, l’APIC constitue un facilitateur important qui a permis de découvrir des lieux de participation et d’améliorer leur capacité à se déplacer seul. L’APIC est une intervention prometteuse qui permet d’améliorer les déplacements et l’utilisation de l’espace d’aînés en perte d’autonomie.

Integrating health and sustainability in life cycle assessment

Until now health impact assessment and environmental impact assessment are two different issues, often not addressed together. Both issues have to be dealt with for sustainable building. The aim of this paper is to link healthy and sustainable housing in life cycle assessment. Two strategies are studied: clean air as a functional unity and health as a quality indicator. The strategies are illustrated with an example on the basis of Eco-Quantum, which is a Dutch whole-building assessment tool. It turns out that both strategies do not conflict with the LCA methodology. The LCA methodology has to be refined for this purpose.

Review : "Quality of life: the assessment, analysis and interpretation of patient-reported outcomes (2nd Ed.)" by Peter M. Fayers & David Machin

An updated version, this excellent text is a timely addition to the library of any nurse researching in oncology or other settings where individuals’ quality of life must be understood. Health-related quality of life should be a central aspect of studies concerned with health and illness. Indeed, considerable evidence has recently emerged in oncology and other research settings that selfreported quality of life is of great prognostic significance and may be the most reliable predictor of subsequent morbidity and mortality. From a nursing perspective, it is also gratifying to note that novel therapy and other oncology studies increasingly recognize the importance of understanding patients’ subjective experiences of an intervention over time and to ascertain whether patients perceive that a new intervention makes a difference to their quality of life and treatment outcomes. Measurements of quality of life are now routine in clinical trials of chemotherapy drugs and are often considered the prime outcome of interest in the cost/benefit analyses of these treatments. The authors have extensive experience in qualityof- life assessment in cancer clinical trials, where most of the pioneering work into quality of life has been conducted. That said, many of the health-related qualityof- life issues discussed are common to many illnesses, and researchers outside of cancer should find the book equally helpful.

A life cycle assessment approach to quantifying greenhouse gas emissions from land-use change for beef production in eastern Australia

In life cycle assessment studies, greenhouse gas (GHG) emissions from direct land-use change have been estimated to make a significant contribution to the global warming potential of agricultural products. However, these estimates have a high uncertainty due to the complexity of data requirements and difficulty in attribution of land-use change. This paper presents estimates of GHG emissions from direct land-use change from native woodland to grazing land for two beef production regions in eastern Australia, which were the subject of a multi-impact life cycle assessment study for premium beef production. Spatially- and temporally consistent datasets were derived for areas of forest cover and biomass carbon stocks using published remotely sensed tree-cover data and regionally applicable allometric equations consistent with Australia's national GHG inventory report. Standard life cycle assessment methodology was used to estimate GHG emissions and removals from direct land-use change attributed to beef production. For the northern-central New South Wales region of Australia estimates ranged from a net emission of 0.03 t CO2-e ha-1 year-1 to net removal of 0.12 t CO2-e ha-1 year-1 using low and high scenarios, respectively, for sequestration in regrowing forests. For the same period (1990-2010), the study region in southern-central Queensland was estimated to have net emissions from land-use change in the range of 0.45-0.25 t CO2-e ha-1 year-1. The difference between regions reflects continuation of higher rates of deforestation in Queensland until strict regulation in 2006 whereas native vegetation protection laws were introduced earlier in New South Wales. On the basis of liveweight produced at the farm-gate, emissions from direct land-use change for 1990-2010 were comparable in magnitude to those from other on-farm sources, which were dominated by enteric methane. However, calculation of land-use change impacts for the Queensland region for a period starting 2006, gave a range from net emissions of 0.11 t CO2-e ha-1 year-1 to net removals of 0.07 t CO2-e ha-1 year-1. This study demonstrated a method for deriving spatially- and temporally consistent datasets to improve estimates for direct land-use change impacts in life cycle assessment. It identified areas of uncertainty, including rates of sequestration in woody regrowth and impacts of land-use change on soil carbon stocks in grazed woodlands, but also showed the potential for direct land-use change to represent a net sink for GHG.

Feeding mode of Australian infants in the first 12 months of life: An assessment against national breastfeeding indicators

Background: In 2011, Australia published a set of 6 population-level indicators assessing breastfeeding, formula use, and the introduction of soft/semisolid/solid foods. Objectives: This study aimed to report the feeding practices of Australian infants against these indicators and determine the predictors of early breastfeeding cessation and introduction of solids. Methods: Mother–infant dyads (N = 1470) were recruited postnatally in 2 Australian capital cities and regional areas of 1 state between February 2008 and March 2009. Demographic and feeding intention data were collected by self-completed questionnaire at infant birth, with feeding practices (current feeding mode, age of breastfeeding cessation, age of formula and/or solids introduction) reported when the infant was between 4 and 7 months of age, and around 13 months of age. Multiple logistic regression was used to determine the predictors of breastfeeding cessation and solids introduction. Results: Although initiation of breastfeeding was almost universal (93.3%), less than half of the infants were breastfed to 6 months (41.7%) and 33.3% were receiving solids by 4 months. Women who were socially disadvantaged, younger, less educated, unpartnered, primiparous, and/or overweight were most likely to have ceased breastfeeding before 6 months of age, and younger and/or less educated women were most likely to have introduced solid food by 4 months of age. Not producing adequate milk was the most common reason provided for cessation of breastfeeding. Conclusion: The feeding behaviors of Australian infants in the first 12 months fall well short of recommendations. Women need anticipatory guidance as to the indicators of breastfeeding success and the tendency of women to doubt the adequacy of their breast milk supply warrants further investigation.

A method for Estimating the Degree of Uncertainty With Respect to Life Cycle Assessment During Design

Life cycle assessment (LCA) is used to estimate a product's environmental impact. Using LCA during the earlier stages of design may produce erroneous results since information available on the product's lifecycle is typically incomplete at these stages. The resulting uncertainty must be accounted for in the decision-making process. This paper proposes a method for estimating the environmental impact of a product's life cycle and the associated degree of uncertainty of that impact using information generated during the design process. Total impact is estimated based on aggregation of individual product life cycle processes impacts. Uncertainty estimation is based on assessing the mismatch between the information required and the information available about the product life cycle in each uncertainty category, as well as their integration. The method is evaluated using pre-defined scenarios with varying uncertainty. DOI: 10.1115/1.4002163]

Local systems, global impacts : Using life cycle assessment to analyse the potential and constraints of industrial symbioses

Human activities extract and displace different substances and materials from the earth s crust, thus causing various environmental problems, such as climate change, acidification and eutrophication. As problems have become more complicated, more holistic measures that consider the origins and sources of pollutants have been called for. Industrial ecology is a field of science that forms a comprehensive framework for studying the interactions between the modern technological society and the environment. Industrial ecology considers humans and their technologies to be part of the natural environment, not separate from it. Industrial operations form natural systems that must also function as such within the constraints set by the biosphere. Industrial symbiosis (IS) is a central concept of industrial ecology. Industrial symbiosis studies look at the physical flows of materials and energy in local industrial systems. In an ideal IS, waste material and energy are exchanged by the actors of the system, thereby reducing the consumption of virgin material and energy inputs and the generation of waste and emissions. Companies are seen as part of the chains of suppliers and consumers that resemble those of natural ecosystems. The aim of this study was to analyse the environmental performance of an industrial symbiosis based on pulp and paper production, taking into account life cycle impacts as well. Life Cycle Assessment (LCA) is a tool for quantitatively and systematically evaluating the environmental aspects of a product, technology or service throughout its whole life cycle. Moreover, the Natural Step Sustainability Principles formed a conceptual framework for assessing the environmental performance of the case study symbiosis (Paper I). The environmental performance of the case study symbiosis was compared to four counterfactual reference scenarios in which the actors of the symbiosis operated on their own. The research methods used were process-based life cycle assessment (LCA) (Papers II and III) and hybrid LCA, which combines both process and input-output LCA (Paper IV). The results showed that the environmental impacts caused by the extraction and processing of the materials and the energy used by the symbiosis were considerable. If only the direct emissions and resource use of the symbiosis had been considered, less than half of the total environmental impacts of the system would have been taken into account. When the results were compared with the counterfactual reference scenarios, the net environmental impacts of the symbiosis were smaller than those of the reference scenarios. The reduction in environmental impacts was mainly due to changes in the way energy was produced. However, the results are sensitive to the way the reference scenarios are defined. LCA is a useful tool for assessing the overall environmental performance of industrial symbioses. It is recommended that in addition to the direct effects, the upstream impacts should be taken into account as well when assessing the environmental performance of industrial symbioses. Industrial symbiosis should be seen as part of the process of improving the environmental performance of a system. In some cases, it may be more efficient, from an environmental point of view, to focus on supply chain management instead.