Characterization of the mechanisms underlying the inflammatory response to Polistes lanio lanio (paper wasp) venom in mouse dorsal skin

Stings by Polistes wasps can cause life-threatening allergic reactions, pain and inflammation. We examined the changes in microvascular permeability and neutrophil influx caused by the venom of Polistes lanio a paper wasp found in southeastern Brazil. The intradermal injection of wasp venom caused long-lasting paw oedema and dose-dependently increased microvascular permeability in mouse dorsal skin. SR140333, an NK(1) receptor antagonist, markedly inhibited the response, but the NK(2) receptor antagonist SR48968 was ineffective. The oedema was reduced in capsaicin-treated rats, indicating a direct activation of sensory fibres. Dialysis of the venom partially reduced the oedema and the remaining response was further inhibited by SR140333. Mass spectrometric analysis of the venom revealed two peptides (QPPTPPEHRFPGLM and ASEPTALGLPRIFPGLM) with sequence similarities to the C-terminal region of tachykinin-like peptides found in Phoneutria nigniventer spider venom and vertebrates. Wasp venom failed to release histamine from mast cells in vitro and spectrofluorometric assay of the venom revealed a negligible content of histamine in the usual dose of P.l. lanio venom (1 nmol of histamine/7 mu g of venom)that was removed by dialysis. The histamine H(1) receptor antagonist pyrilamine, but not bradykinin B(1) or B(2) receptor antagonists, inhibited venom-induced oedema. In conclusion, P. l. lanio venom induces potent oedema and increases vascular permeability in mice, primarily through activation of tachykinin NK(1) receptors by substance P released from sensory C fibres, which in turn releases histamine from dermal mast cells. This is the first description of a neurovascular mechanism for P. l. lanio venom-mediated inflammation. The extent to which the two tachykinin-like peptides identified here contribute to this neurogenic inflammatory response remains to be elucidated. (c) 2008 Elsevier Ltd. All rights reserved.

Male behavior in colonies of the social wasp Polistes lanio (Hymenoptera, Vespidae)

Sixteen post-emergent colonies of Polistes lanio were studied while producing males in the course of the colonial cycle. Individually, they remained in the nest only 10.5 days (5-31, n=165). Twelve different male behaviors were observed: remaining immobile on the nest (82,8%), giving alarm (4,8%), flying out from the nest (2,4%), copulating on the nest (2,4%), being dominated (1,6%), self-grooming (1,2%), checking cells (1,2%), adult-adult trophallaxis (receiving food) (0,8%), larva-adult trophallaxis (0,8%), chewing prey and giving it to the larvae (0,8%), returning to the nest without food (0,8%), and fanning the nest (0,4%). In comparison to the behavioral repertory of females (28 items), they performed fewer tasks and remained immobile most of the time on the nest. Their behavior was largely related to self maintenance, but also included giving chewed prey to the larvae, giving alarm signals and fanning the nest.

Análise proteômica do veneno da vespa social Polistes lanio lanio (Hymenoptera; vespidae)

Os venenos dos insetos da ordem Hymenoptera (abelhas, vespas e formigas) são responsáveis por um grande número de acidentes causados por ferroadas. Estes acidentes podem produzir uma série de reações, variando desde uma reação local, até uma reação sistêmica e anafilaxia. Estudos mostraram que 0,8% a 5% da população mundial sofrem de reações sistêmicas generalizadas após ferroadas de insetos pertencentes à ordem Hymenoptera. As espécies pertencentes ao gênero Polistes são tipicamente encontradas no sudeste do Brasil, causando muitos acidentes por ferroadas devido principalmente à proximidade dos ninhos destes insetos das habitações humanas. P.lanio lanio é uma das vespas sociais que mais causam acidentes no Estado de São Paulo e pouco se sabe sobre a composição de seu veneno. As vespas do gênero Polistes são capazes de ferroar múltiplas vezes e causar reações alérgicas severas. Dessa forma, a identificação das proteínas mais abundantes do veneno da vespa social Polistes lanio lanio por uma abordagem proteômica, se faz necessária para uma melhor compreensão dos mecanismos de ação desse veneno. A identificação de várias proteínas do veneno de P. l. lanio, revelou importantes aspectos sobre o processo de envenenamento por vespas do gênero Polistes, os quais podem ajudar no melhor entendimento dos mecanismos de ação destes venenos. A compreensão dos principais alérgenos é uma etapa importante para o desenvolvimento de novos extratos específicos para diagnósticos de alergia e imunoterapia de pacientes sensíveis ao veneno de vespas.

Morfometria, variação anual no peso e demografia do Tico-tico-rei-cinza (Lanio pileatus: thraupidae) em dois ambientes de caatinga no nordeste do Brasil

The caatinga is considered the only exclusively Brazilian biome, with a total area of 735.000km². It is estimated that about 59% of this area has already been removed and only 2% are protected in conservations units. The region is characteristic by strong seasonality and heterogeneity in their environments. This paper sets generate information on morphological and population patterns Lanio pilatus in two areas of caatinga of Estação Ecológica do Seridó (ESEC – Seridó), Serra Negra do Norte - RN. Data collection was performed in six phases between July 2012 and December 2014, covering the end of the dry and rainy seasons in the region. The captures were performed with nets and individuals captured were marked with metal rings and measured (weight, wing length, tail, tarsus, culmen and tip of the bill to nostril). Through these measures, we observed that only males of open area range in weight during the dry and rainy season, youngs were significantly lower for all parameters measured, and males were larger than females in three characteristics (weight, wing length and tail) in open area and only one (wing length) in the closed area. The population parameters were generated from the mark-capture-recapture technique by program MARK, using the techniques of robust design and CJS. The survival probability of detection and population estimates varied with time. Only individuals of open area fluctuated in their estimates during the study. Overall, the environment was a great mediator of results which increases the need for more studies on the life history of the species in the region.

Assembleia de aves consumidoras de frutos de sub-bosque em diferentes altitudes em uma área de Mata Atlântica no estado do Rio de Janeiro

Neste estudo, investigamos a distribuição altitudinal da composição, riqueza, abundância das espécies de aves consumidoras de frutos em cinco altitudes e avaliamosa influência da estrutura da vegetação nas diversidades de aves. O estudo foi realizado na Reserva Ecológica de Guapiaçu (REGUA) contígua ao Parque Estadual dos Três Picos (PEPT), no município de Cachoeiras de Macacu, RJ. Coletamos os dados das aves em 24 excursões a campo, incluindo seis bimensais (jul./2010 a maio/2011) e 18 mensais (jul./2011 a dez./2012). Para amostragem das aves, utilizamos o método de captura-marcação-recaptura com redes de neblina, expostas durante sete h/dia em cinco altitudesao longo de uma variação altitudinal de 1000 m. O esforço amostral foi de 8400 h-rede. Para amostragem da estrutura da vegetação, sorteamos três parcelas de 100 m2 adjacentes às linhas das redes em cada altitude, nas quais foram analisadas as densidades de diferentes hábitos de vida. Das árvores, arvoretas e arbustos coletamos as medidas de altura total e diâmetro da altura (no caso dos arbustos, o diâmetro foi coletado a 50 cm do solo). Capturamos 448 indivíduos correspondentes a 35 espécies de aves, distribuídas em 16 famílias. Destas, 26% são endêmicas de Mata Atlântica, incluindo quatro espécies categorizadas com algum grau de vulnerabilidade. Dezesseis espécies foram classificadas como frugívoras enquanto 19 como insetívoras-frugívoras. Leptopogon amaurocephalus, Mionectes rufiventris, Lanio melanops, Chiroxiphia caudata foram capturadas nas cinco altitudes, sendo as últimas duas espécies as mais abundantes. Registramos maior riqueza e abundância de aves nas altitudes de 370 e 770 m. A composição de aves diferiu entre as altitudes, sendo 170 e 1000 m as mais dissimilares. As espécies de aves insetívoras-frugívoras predominaram nos sub-bosques das cinco altitudes. Registramos deslocamento altitudinal de cinco espécies de aves, sendo o maior deslocamento realizado por um indivíduo de Attilarufus, capturado a 770 m e, recapturado a 370 m. Encontramos maior densidade de plantas no sub-bosque nas altitudes 170, 370 e 1000 m. Bambus foram registrados apenas a 1000 m, enquanto que as ervas foram limitadas às altitudes de 170 e 370 m. A estrutura da vegetação apresentou baixa similaridade entre as altitudes, principalmente devido a diferentes densidades das formas de vida e altura das plantas. Três altitudes, 170, 370 e 1000 m, apresentaram alta densidade de indivíduos no sub-bosque, sendo que esta última evidenciou uma estrutura da vegetação relativamente mais simples devido ao alto número de árvores de baixa altura, ao maior número de arvoretas e à presença de bambus. A diversidade de aves foi sensível à estrutura da vegetação, em especial à altura das árvores que apresentou um decréscimo da altura com o aumento da altitude. Esta relação entre a diversidade de aves e a estruturada da vegetação destaca a importância da preservação da estrutura da vegetação para a manutenção da diversidade de aves consumidoras de frutos da REGUA e do PETP

Ferroelectricity in epitaxial pulsed laser deposited bismuth-layered perovskite thin films of different crystallographic orientations

Epitaxial thin films Of various bismuth-layered perovskites SrBi(2)Ta(2)O(9), Bi(4)Ti(3)O(12), BaBi(4)Ti(4)O(15), and Ba(2)Bi(4)Ti(5)O(18) were deposited by pulsed laser deposition onto epitaxial conducting LaNiO(3) or SrRuO(3) electrodes on single crystalline SrTiO(3) substrates with different crystallographic orientations or on top of epitaxial buffer layers on (100) silicon. The conductive perovskite electrodes and the epitaxial ferroelectric films are strongly influenced by the nature of the substrate, and bismuth-layered perovskite ferroelectric films with mixed (100), (110)- and (001)-orientations as well as with uniform (001)-, (116)- and (103)- orientations have been obtained. Structure and morphology investigations performed by X-ray diffraction analysis, scanning probe microscopy, and transmission electron microscopy reveal the different epitaxial relationships between films and substrates. A clear correlation of the crystallographic orientation of the epitaxial films with their ferroelectric properties is illustrated by macroscopic and microscopic measurements of epitaxial bismuth-layered perovskite thin films of different crystallographic orientations.

Preparation of La2NiO4+δ powders as a cathode material for SOFC via a PVP-assisted hydrothermal route

Uniform submicron La₂NiO_4+δ (sm-LNO) powders have been synthesized by a facile polyvinylpyrrolidone (PVP)-assisted hydrothermal route. In the presence of PVP, sm-LNO of pure phase has been obtained by calcination at the relatively low temperature of 900 °C for 8 h. Compared micron-sized LNO (m-LNO) particles obtained at 1,000 °C by hydrothermal synthesis route without PVP assisted, the sm-LNO-PVP displays regularly shaped and well-distributed particles in the range of 0.3–0.5 μm. The scanning electron microscopy (SEM) results showed that the sm-LNO sample is submicronic and that the m-LNO sample shows agglomerates with a broad size distribution. The electrochemical performance of m-LNO and sm-LNO-PVP has been investigated by electrochemical impedance spectroscopy. The polarization resistance of the sm-LNO-PVP cathode reaches a value of 0.40 Ω cm² at 750 °C, which is lower than that of m-LNO (0.62 Ω cm²). This result indicates that a fine electrode microstructure with submicron particles can help to increase the active sites, accelerate oxygen diffusion, and reduce polarization resistance. An anode-supported single cell with sm-LNO cathode has been fabricated and tested over a temperature range from 650 to 800 °C. The maximum power density of the cell has achieved 834 mW cm⁻² at 750 °C. These results therefore show that this PVP-assisted hydrothermal method is an effective approach to construct submicron-structured cathode and enhance the performance of intermediate temperature solid oxide fuel cell.

Cys mutants in functional regions of Sticholysin I clarify the participation of these residues in pore formation

Experimental evidence shows that the mechanism of pore formation by actinoporins is a multistep process, involving binding of the water-soluble monomer to the membrane and subsequent oligomerization on the membrane surface, leading to the formation of a functional pore. However, as for other eukaryotic pore-forming toxins, the molecular details of the mechanism of membrane insertion and oligomerization are not clear. In order to obtain further insight with regard to the structure-function relationship in sticholysins, we designed and produced three cysteine mutants of recombinant sticholysin I (rStI) in relevant functional regions for membrane interaction: StI E2C and StI F15C (in the N-terminal region) and StI R52C (in the membrane binding site). The conformational characterization derived from fluorescence and CD spectroscopic studies of StI E2C, StI F15C and StI R52C suggests that replacement of these residues by Cys in rStI did not noticeably change the conformation of the protein. The substitution by Cys of Arg(52) in the phosphocholine-binding site, provoked noticeable changes in rStI permeabilizing activity; however, the substitutions in the N-terminal region (Glu(2), Phe(15)) did not modify the toxin`s permeabilizing ability. The presence of a dimerized population stabilized by a disulfide bond in the StI E2C mutant showed higher pore-forming activity than when the protein is in the monomeric state, suggesting that sticholysins pre-ensembled at the N-terminal region could facilitate pore formation. (C) 2011 Elsevier Ltd. All rights reserved.

CO preferential oxidation (CO-PROx) on La(1-x)Ce(x)NiO(3) perovskites

La(1-x)Ce(x)NiO(3) perovskites have been prepared, characterized by XRD. TPR and surface area and tested as catalysts for CO-PROx, with a feed of 2.5% CO, 5% O(2), 33% H(2) and N(2) to 100%. The samples exhibited an XRD pattern typical of the perovskite, with traces of NiO in the LaNiO(3) and La(0.95)Ce(0.05)NiO(3) samples, with some La(2)NiO(4) in the La(0.90)Ce(0.10)NiO(3) sample. All samples were active, but the perovskites with cerium showed good catalytic activity, demonstrating the promoter effect of cerium. The highest conversion of CO and H(2) was obtained with La(0.95)Ce(0.05)NiO(3), probably due to a synergy between Ni and Ce that enhanced O(2) mobility. (c) 2010 Elsevier B.V. All rights reserved.

Validation of a mutant of the pore-forming toxin sticholysin-I for the construction of proteinase-activated immunotoxins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The membranotropic activity of N-terminal peptides from the pore-forming proteins sticholysin I and II is modulated by hydrophobic and electrostatic interactions as well as lipid composition

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Correlations between differences in amino-terminal sequences and different hemolytic activity of sticholysins

Sticholysins I and II (St I and St II) are cytolysins produced by the sea anemone Stichodactyla helianthus. In spite of their 93% sequence homology, St II is more hemolytic against human erythrocytes than St 1. In order to establish the possible causes of this difference, we studied the hemolytic activity of synthetic peptides containing sequences from the N-termini of both proteins. The results demonstrated that the differences in hemolytic activity of the toxins could be ascribed at least partly to differences in their N-termini. (c) 2007 Elsevier Ltd. All rights reserved.

Model peptides mimic the structure and function of the N-terminus of the pore-forming toxin sticholysin II

To investigate the role of the N-terminal region in the lytic mechanism of the pore-forming toxin sticholysin II (St II), we studied the conformational and functional properties of peptides encompassing the first 30 residues of the protein. Peptides containing residues 1-30 (P1-30) and 11-30 (P11-30) were synthesized and their conformational properties were examined in aqueous solution as a function of peptide concentration, pH, ionic strength, and addition of the secondary structure-inducing solvent trifluoroethanol (TFE). CD spectra showed that increasing concentration, pH, and ionic strength led to aggregation of P1-30; as a consequence, the peptide acquired beta-sheet conformation. In contrast, P11-30 exhibited practically no conformational changes under the same conditions, remaining essentially structureless. Moreover, this peptide did not undergo aggregation. These differences clearly point to the modulating effect of the first 10 hydrophobic residues on the peptides aggregation and conformational properties. In TFE both the first ten hydrophobic peptides acquired alpha-helical conformation, albeit to a different extent, P11-30 displayed lower alpha-helical content. P1-30 presented a larger-fraction of residues in alpha-helical conformation in TFE than that found in St II's crystal structure for that portion of the protein. Since TFE mimics the membrane em,, such increase in helical content could also occur upon toxin binding to membranes and represent a step in the mechanism of pore formation. The peptides conformational properties correlated well with their functional behaviour. Thus, P1-30 exhibited much higher hemolytic activity than P11-30. In addition, P11-30 was able to block the toxin's hemolytic activity. The size of pores formed in red blood cells by P 1-30 was estimated by measuring the permeability PEGs of different molecular mass. The pore radius (0.95 +/- 0.01 nm) was very similar to that of the PEGs of different pore formed by the toxin. The results demonstrate that the synthetic peptide P1-30 is a good model of St 11 conformation and function and emphasize the contribution of the toxin's N-terminal region, and, in particular, the hydrophobic residues 1-10 to pore formation. (c) 2005 Wiley Periodicals, Inc.

Hyaluronidase from the venom of the social wasp Polybia paulista (Hymenoptera, Vespidae): Cloning, structural modeling, purification, and immunological analysis

In this study, we describe the cDNA cloning, sequencing, and 3-D structure of the allergen hyaluronidase from Polybia paulista venom (Pp-Hyal). Using a proteomic approach, the native form of Pp-Hyal was purified to homogeneity and used to produce a Pp-specific polyclonal antibody. The results revealed that Pp-Hyal can be classified as a glycosyl hydrolase and that the full-length Pp-Hyal cDNA (1315 bp; GI: 302201582) is similar (80-90%) to hyaluronidase from the venoms of endemic Northern wasp species. The isolated mature protein is comprised of 338 amino acids, with a theoretical pI of 8.77 and a molecular mass of 39,648.8 Da versus a pI of 8.13 and 43,277.0 Da indicated by MS. The Pp-Hyal 3D-structural model revealed a central core (α/β)7 barrel, two sulfide bonds (Cys 19-308 and Cys 185-197), and three putative glycosylation sites (Asn79, Asn187, and Asn325), two of which are also found in the rVes v 2 protein. Based on the model, residues Ser299, Asp107, and Glu109 interact with the substrate and potential epitopes (five conformational and seven linear) located at surface-exposed regions of the structure. Purified native Pp-Hyal showed high similarity (97%) with hyaluronidase from Polistes annularis venom (Q9U6V9). Immunoblotting analysis confirmed the specificity of the Pp-Hyal-specific antibody as it recognized the Pp-Hyal protein in both the purified fraction and P. paulista crude venom. No reaction was observed with the venoms of Apis mellifera, Solenopsis invicta, Agelaia pallipes pallipes, and Polistes lanio lanio, with the exception of immune cross-reactivity with venoms of the genus Polybia (sericea and ignobilis). Our results demonstrate cross-reactivity only between wasp venoms from the genus Polybia. The absence of cross-reactivity between the venoms of wasps and bees observed here is important because it allows identification of the insect responsible for sensitization, or at least of the phylogenetically closest insect, in order to facilitate effective immunotherapy in allergic patients. © 2013 Elsevier Ltd.