Limittelymenetelmän hyödyntäminen verkkovaihtosuuntaajassa: LCL-suotimen mitoitus

Teollisuudessa yleinen trendi on saada entistä tehokkaampia, halvempia, hyötysuhteeltaan parempia ja fyysisiltä mitoiltaan pienempiä sähkökäyttöjä. Luonnollisesti nämä vaatimukset ovat samoja myös taajuusmuuttajilla. Näiden vaatimusten välillä täytyy aina tehdä kompromisseja ja kehittää uusia menetelmiä. Monissa teollisuuden sähkökäytöissä tarvitaan verkkovaihtosuuntaajaa syöttämään tehoa generaattorilta tai jarrutettavalta moottorilta sähköverkkoon. Verkkovaihtosuuntaajassa käytännössä tarvitaan aina LCL-suodin, joka on fyysisesti järjestelmän suurin ja kallein yksittäinen komponentti, ja luonnollisesti suuritehoinen laite vaatii suuren LCL-suotimen. LCL-Suotimen fyysinen koko on kääntäen verrannollinen kytkentätaajuuteen. Tässä diplomityössä esitellään interleaving eli limittelymenetelmä, jonka avulla pystytään kasvattamaan verkkovaihtosuuntaajan ekvivalenttista kytkentätaajuutta ja pienentämään virran värettä sekä kokonaisharmonista säröä. Menetelmästä aiheutuu myös merkittävä haaste, kiertovirrat, joiden suodatusta tutkitaan kahdella eri menetelmällä. Käytetyt suodatustavat ovat LCL-suodin, jossa on lisäksi CM-kuristin ja LCL-suodin, jossa käytetään solujen välistä muuntajaa, ICT:tä. Työ suoritettiin teoriatutkimuksena ja simuloimalla. Tulokset osoittavat, että molemmat suodatustavat voivat toimia todellisessa sovelluksessa. Kuitenkin vain ICT:n omaava suodin on selkeästi vastaavan kokoista kaksitasoista verkkovaihtosuuntaajan suodinta pienempi. Tutkimus osoittaa myös sen, että tutkitussa sovelluskohteessa pelkkä fyysinen suodin ei riitä suodattamaan kiertovirtoja, vaan säätimeen täytyy tehdä myös muutoksia.

Robust control applied to power flow control in single-phase inverter with LCL filter, using droop control and D-stability

This paper proposes a new methodology to control the power flow between a distributed generator (DG) and the electrical power distribution grid. It is used the droop voltage control to manage the active and reactive power. Through this control a sinusoidal voltage reference is generated to be tracked by voltage loop and this loop generates the current reference for the current loop. The proposed control introduces feed-forward states improving the control performance in order to obtain high quality for the current injected to the grid. The controllers were obtained through the linear matrix inequalities (LMI) using the D-stability analysis to allocate the closed-loop controller poles. Therefore, the results show quick transient response with low oscillations. Thus, this paper presents the proposed control technique, the main simulation results and a prototype with 1000VA was developed in the laboratory in order to demonstrate the feasibility of the proposed control. © 2012 IEEE.

Analysis and improvement of performance in LCL filter-based PWM rectifier/inverter application using hybrid damping approach

A hybrid passive-active damping solution with improved system stability margin and enhanced dynamic performance is proposed for high power grid interactive converters. In grid connected active rectifier/inverter application, line side LCL filter improves the high frequency attenuation and makes the converter compatible with the stringent grid power quality regulations. Passive damping though offers a simple and reliable solution but it reduces overall converter efficiency. Active damping solutions do not increase the system losses but can guarantee the stable operation up to a certain speed of dynamic response which is limited by the maximum bandwidth of the current controller. This paper examines this limit and introduces a concept of hybrid passive-active damping solution with improved stability margin and high dynamic performance for line side LCL filter based active rectifier/inverter applications. A detailed design, analysis of the hybrid approach and trade-off between system losses and dynamic performance in grid connected applications are reported. Simulation and experimental results from a 10 kVA prototype demonstrate the effectiveness of the proposed solution. An analytical study on system stability and dynamic response with the variations of various controller and passive filter parameters is presented.

Distributed Power balance and damping control for high power multiport LCL DC hub

This project is funded by European Research Council in FP7; grant no 259328, 2010 and EPSRC grant no EP/K006428/1, 2013.

Distributed Power balance and damping control for high power multiport LCL DC hub

This project is funded by European Research Council in FP7; grant no 259328, 2010 and EPSRC grant no EP/K006428/1, 2013.

Comparação do controle do inversor trifásico conectado à rede com filtro LCL considerando o amortecimento passivo e ativo

Distributed generation systems must fulfill standards specifications of current harmonics injected to the grid. In order to satisfy these grid requirements, passive filters are connected between inverter and grid. This work compares the characteristic response of the traditional inductive (L) filter with the inductive-capacitive-inductive (LCL) filter. It is shown that increasing the inductance L leads to a good ripple current suppression around the inverter switching frequency. The LCL filter provides better harmonic attenuation and reduces the filter size. The main drawback is the LCL filter impedance, which is characterized by a typical resonance peak, which must be damped to avoid instability. Passive or active techniques can be used to damp the LCL resonance. To address this issue, this dissertation presents a comparison of current control for PV grid-tied inverters with L filter and LCL filter and also discuss the use of active and passive damping for different regions of resonance frequency. From the mathematical models, a design methodology of the controllers was developed and the dynamic behavior of the system operating in closed loop was investigated. To validate the studies developed during this work, experimental results are presented using a three-phase 5kW experimental platform. The main components and their functions are discussed in this work. Experimental results are given to support the theoretical analysis and to illustrate the performance of grid-connected PV inverter system. It is shown that the resonant frequency of the system, and sampling frequency can be associated in order to calculate a critical frequency, below which is essential to perform the damping of the LCL filter. Also, the experimental results show that the active buffer per virtual resistor, although with a simple development, is effective to damp the resonance of the LCL filter and allow the system to operate stable within predetermined parameters.

Optimising fed-batch production of recombinant proteins using the baculovirus expression vector system

Fed-batch culture can offer significant improvement in recombinant protein production compared to batch culture in the baculovirus expression vector system (BEVS), as shown by Nguyen et al. (1993) and Bedard et al. (1994) among others. However, a thorough analysis of fed-batch culture to determine its limits in improving recombinant protein production over batch culture has yet to be performed. In this work, this issue is addressed by the optimisation of single-addition fed-batch culture. This type of fed-batch culture involves the manual addition of a multi-component nutrient feed to batch culture before infection with the baculovirus. The nutrient feed consists of yeastolate ultrafiltrate, lipids, amino acids, vitamins, trace elements, and glucose, which were added to batch cultures of Spodoptera frugiperda (Sf9) cells before infection with a recombinant Autographa californica nuclear polyhedrosis virus (Ac-NPV) expressing beta-galactosidase (beta-Gal). The fed-batch production of beta-Gal was optimised using response surface methods (RSM). The optimisation was performed in two stages, starting with a screening procedure to determine the most important variables and ending with a central-composite experiment to obtain a response surface model of volumetric beta-Gal production. The predicted optimum volumetric yield of beta-Gal in fed-batch culture was 2.4-fold that of the best yields in batch culture. This result was confirmed by a statistical analysis of the best fed-batch and batch data (with average beta-Gal yields of 1.2 and 0.5 g/L, respectively) obtained from this laboratory. The response surface model generated can be used to design a more economical fed-batch operation, in which nutrient feed volumes are minimised while maintaining acceptable improvements in beta-Gal yield. (C) 1998 John Wiley & Sons, Inc.

Structured modeling of recombinant protein production in batch and fed-batch culture of baculovirus-infected insect cells

The infection of insect cells with baculovirus was described in a mathematical model as a part of the structured dynamic model describing whole animal cell metabolism. The model presented here is capable of simulating cell population dynamics, the concentrations of extracellular and intracellular viral components, and the heterologous product titers. The model describes the whole processes of viral infection and the effect of the infection on the host cell metabolism. Dynamic simulation of the model in batch and fed-batch mode gave good agreement between model predictions and experimental data. Optimum conditions for insect cell culture and viral infection in batch and fed-batch culture were studied using the model.

In vitro infectivity of species of Leishmania (Viannia) responsible for American cutaneous leishmaniasis

There is little available information regarding the infectivity of New World Leishmania species, particularly those from the Amazonian Brazil, where there are six species of the subgenus Viannia causing American cutaneous leishmaniasis (ACL). The aim of this study was to compare, in vitro, the potential infectivity of the following Leishmania (Viannia) spp.: L. (V.) braziliensis from localized cutaneous leishmaniasis (LCL) and mucocutaneous leishmaniasis (MCL) patients, L. (V.) guyanensis, L. (V.) shawi, L. (V.) lainsoni and L. (V.) naiffi from LCL patients only, in cultured BALB/c mice peritoneal macrophage, as well as the production of NO by the infected cells. The infectivity of parasites was expressed by the infection index and, the nitric oxide (NO) production in the macrophage culture supernatant was measured by the Griess method. It was found that L. (V.) braziliensis from MCL, the more severe form of disease, showed the highest (p <= 0.05) infection index (397), as well as the lowest NO production (2.15 mu M) compared with those of other species. In contrast, L. (V.) naiffi which is less pathogenic for the human showed the lowest infection index (301) and the highest NO production (4.11 mu M). These results demonstrated a negative correlation between the infectivity and the ability of these parasites to escape from the microbicidal activity of the host cell.

Chemokines and chemokine receptors coordinate the inflammatory immune response in human cutaneous leishmaniasis

Cutaneous leishmaniasis (CL) includes different clinical manifestations displaying diverse intensities of dermal Inflammatory infiltrate Diffuse CL (DCL) cases are hyporesponsive and lesions show very few lymphocytes and a predominance of macrophages In contrast localized CL (LCL) cases are responsive to leishmanial antigen and lesions exhibit granulocytes and mononuclear cell infiltration in the early phases changing to a pattern with numerous lymphocytes and macrophages later in the lesion Therefore different chemokines may affect the predominance of cell infiltration in distinct clinical manifestations In lesions from LCL patients we examined by flow cytometry the presence of different chemokines and their receptors in T cells and we verified a higher expression of CXCR3 in the early stages of LCL (less than 30 days of infection) and a higher expression of CCR4 in the late stages of disease (more than 60 days of infection) We also observed a higher frequency of T cells producing IL-10 in the late stage of LCL Using immunohistochemistry we observed a higher expression of CCL7 CCL17 in lesions from late LCL as well as CCR4 suggesting a preferential recruitment of regulatory T cells in the late LCL Comparing lesions from LCL and DCL patients we observed a higher frequency of CCL7 in DCL lesions These results point out the Importance of the chemokines defining the different types of cells recruited to the site of the infection which could be related to the outcome of infection as well as the clinical form observed (C) 2010 American Society for Histocompatibility and Immunogenetics Published by Elsevier Inc All rights reserved

P-gingivalis-specific T-cell lines produce Th1 and Th2 cytokines

Cytokines produced by T-cells in periodontal lesions may determine the nature of the adaptive immune response. Since different antigen-7 presenting cells (APC) may direct the Th1/Th2 response, P. gingivalis-specific T-cell lines were established by different APC subpopulations, and their cytokine profiles were determined. Peripheral blood mononuclear cells induced similar percentages of IL-4+ and IFN-gamma+ T-cells and lower percentages of IL-10+ T-cells, Epstein-Barr virus-trans formed B-cells (LCL) induced higher percentages of IL-4+ cells than IFN-gamma+ cells, with lower percentages of IL-10+ cells. Peripheral blood mononuclear cells induced a higher percent of IFN-gamma+ CD8 cells than LCL (p = 0.004). Purified B-cells, monocytes, and dendritic cells induced similar percentages of IL-4+ and IFN-gamma+ cells, although again, the percentage of IL-10+ cells was lower. The results of the present study have demonstrated that, as measured by FACS analysis of intracytoplasmic cytokines, P. gingivalis-specific T-cells produce both Th1 and Th2 cytokines, regardless of the APC population.

The histopathology of cutaneous leishmaniasis due to Leishmania (Leishmania) mexicana in the Yucatan peninsula, Mexico

Localized Cutaneous Leishmaniasis (LCL) known as "chiclero's ulcer" in southeast Mexico, was described by SEIDELIN in 1912. Since then the sylvatic region of the Yucatan peninsula has been documented as an endemic focus of LCL. This study of 73 biopsies from parasitological confirmed lesions of LCL cases of Leishmania (Leishmania) mexicana infection was undertaken: 1) to examine host response at tissue level; and 2) to relate manifestations of this response to some characteristics of clinical presentation. Based on Magalhães' classification we found that the most common pattern in our LCL cases caused by L. (L.) mexicana was predominantly characterized by the presence of unorganized granuloma without necrosis, (43.8%). Another important finding to be highlighted is the fact that in 50/73 (68.5%) parasite identification was positive. There was direct relation between the size of the lesion and time of evolution (r s = 0.3079, p = 0.03), and inverse correlation between size of the lesion and abundance of amastigotes (r s = -0.2467, p = 0.03). In view of the complexity of clinical and histopathological findings, cell-mediated immune response of the disease related to clinical and histopathological features, as so genetic background should be studied.

American tegumentary leishmaniasis: langerhans cells in montenegro skin test

This work analyzed the histopathology and epidermal Langerhans cells (LC) of Montenegro skin test (MST) in patients with American tegumentary leishmaniasis (ATL) in order to in situ characterize and compare the immunological reaction of the two major clinical forms of ATL, localized cutaneous leishmaniasis (LCL) and mucocutaneous leishmaniasis (MCL). MST histopathology of both LCL and MCL showed superficial and deep perivascular inflammatory infiltrate composed mainly of lymphocytes and histiocytes. Epidermal LC population was higher in MST biopsies taken from LCL patients when compared to MCL group, at 48 and 72 hours after antigen inoculation. Increased number of epidermal LC displayed in MST biopsies of LCL patients represents specific cellular immunity against parasites. The decrease of LC in MST biopsies of MCL patients does not necessarily indicate a worse specific cellular immunity in this clinical form of leishmaniasis.

Cytokine profile in Montenegro skin test of patients with localized cutaneous and mucocutaneous leishmaniasis

American tegumentary leishmaniasis presents as two major clinical forms: localized cutaneous leishmaniasis (LCL) and mucocutaneous leishmaniasis (MCL). The immune response in leishmaniasis is efficiently evaluated by the response to Leishmania antigen through the Montenegro skin test (MST). Both LCL and MCL present positive response to MST, indicating that the patients present cell-mediated immunity against the parasite - Leishmania. In spite of the presence of immunity in MCL, this is not sufficient to stop disease progression and prevent resistance to treatment. In this study we demonstrated interleukin (IL) 2, 4, 5 and interferon (IFN) gamma expression in biopsies of MST of ten patients with American tegumentary leishmaniasis. The obtained results were compared between LCL (n = 5) and MCL (n = 5) patients. The MST of MCL patients displayed a higher expression of IL-2, IL-4 and IL-5, in comparison to LCL. There was no significant difference in IFN-gamma expression between groups. The obtained results suggest the role of IL-4 and IL-5 in the maintenance of the immunopathogenic mechanism of the destructive lesions that characterize MCL.