Efeitos de área e de borda sobre a estrutura florestal em fragmentos de floresta de terra-firme após 13-17 anos de isolamento

As estimativas de densidade e biomassa de árvores vivas com DAP > 10 cm e arvoretas 1-9,9 cm de DAP, liteira lenhosa grossa caída (LCG diâmetro > 10 cm), árvores mortas em pé (> 10 de DAP) e liteira lenhosa fina caída (LCF - 2,5 9,9 cm de diâmetro) foram quantificadas em 56 parcelas permanentes de 1 ha, distribuídas em quatro categorias de tamanho de fragmento - fragmentos de 1 ha (4 parcelas), fragmentos de 10 ha (12 parcelas) e fragmentos de 100 ha (14 parcelas) e floresta contínua (19 parcelas) e em duas classes de distância da borda - < 300 m de distância da borda (29 parcelas) e > 300 m (21 parcelas). A densidade e a biomassa de árvores e arvoretas de espécies de estágios sucessionais mais avançados não diferiram significativamente entre as diferentes categorias de tamanho e entre as duas distâncias da borda. Por outro lado, fragmentos florestais e locais < 300 m de distâcia da borda tiveram maior biomassa e densidade de árvores e arvoretas de espécies pioneiras do que floresta contínua e locais > 300 m da borda, respectivamente. Fragmentos florestais apresentaram maior quantidade de LCG e LCF do que a floresta contínua. Houve também diferenças significativas entre ambas as distâncias da borda para a quantidade de LCG e LCF e necromassa total. Uma análise de covariância mostrou que não houve efeito de tamanho do fragmento, mas a distância da borda teve um efeito significativo sobre a quantidade de LCG e LCF. A quantidade de LCG e LCF foi correlacionada negativamente com a distância da borda - locais mais próximos à borda tiveram cerca de 40% e 60% mais LCG do que locais mais distantes.

NH90 helikopterin moottoreiden syklilaskennan tehostaminen ja elinkaarihallinta

Tutkimustyö liittyy NH90 Helikopterin RTM-322 moottoreiden syklivaihdettavi-en osien huollonsuunnitteluun ja sen kehittämiseen. Tavoitteena oli löytää nykyi-sen käyttösyklilaskennan tilalle säästävämpi ratkaisumalli ja saada määritettyä suihkumoottorin osakokonaisuuksille lisälentoaikaa sekä huollonsuunnitteluun järkevämmät käyttöjaksot. Tähän päästiin selvittämällä käytännön lentotoiminnan avulla uudet laskentakertoimet ja -mallit moottorin eri osien eliniän määrittämi-seksi. Konkreettisena tavoitteena oli saada koneen käyttöhistoriaan perustuen kohdeorganisaatiolle esitys, miten moottoreiden käyttösyklilaskentaa tulisi muut-taa ja tehostaa. Diplomityön aihe muodostuu kolmesta tutkimusongelmakokonaisuudesta; moot-torin käyttöhistorian tutkimisesta, moottorivalmistajan hyväksymien syklilasken-tamenetelmien tutkimisesta ja moottorin syklien säästövaikutustarkastelusta tut-kimuksen määrittämillä uusilla laskentamenetelmillä. Tutkimuksen tuloksena muodostui NH90 huollonsuunnitteluun arvio mahdollisis-ta moottorisyklisäästöistä sekä moottoreiden näkökulmasta priorisoitu lista heli-kopterien moottoreiden laitevaihtohuoltojen järjestyksestä seuraavan viiden vuo-den aikana. Syklien säästötarkastelun pohjalta suoritettiin yhden koneen osalta koko käyttöhistorian ajalta takaisinlaskentatarkastelu. Tutkimuksessa selvitettiin Ilmavoimien meneillään olevien projektien valossa moottorisyklien tarkanlasken-nan toteuttamismahdollisuudet tulevaisuudessa. Tutkimuksessa saatujen tulosten avulla vältyttäisiin tulevaisuudessa RTM-322 moottorin ennenaikaisilta laitevaih-doilta koko NH90 kaluston suhteen ja näin saataisiin aikaan merkittävän suuria säästöjä vuoteen 2020 mennessä.

Mechanismenorientierte Lebensdauervorhersage für eine thermo-mechanisch hergestellte Flanschwelle mit gradiertem Gefüge

Im Rahmen der vorliegenden Arbeit wird ein Konzept zur mechanismenorientierten Lebensdauervorhersage entwickelt und auf eine Flanschwelle mit gradiertem Gefüge übertragen. Das Konzept wird in Form eines Computercodes (LOCC) zur Anwendung gebracht. Basierend auf lokalen Spannungen wird für jedes Element eines FE-Modells eine bedingte Versagenswahrscheinlichkeit berechnet. Mithilfe bruch- und ggf. mikromechanischer Modelle werden lokale kritische Risslängen und die bei gegebener Lebensdauer zugehörigen Anfangsrisslängen bestimmt. Diese werden mit geeigneten Modellen in mikrostrukturelle Größen überführt. Die Lebensdauerverteilung der Komponente ergibt sich schließlich aus der Verteilungsfunktion der Anfangsrisslängen bzw. der zugehörigen mikrostrukturellen Einheiten. Die betrachtete Flanschwelle weist als Ergebnis eines thermo-mechanischen Umformprozesses ein gradiertes Gefüge auf. Das Ermüdungsverhalten der Hauptphasen Ferrit-Perlit und Martensit wird untersucht. Während ausgewählter Ermüdungsversuche wird die Schädigungsentwicklung an der Oberfläche mit einem langreichweitigen Mikroskop beobachtet. Das ferritisch-perlitische Ausgangsgefüge zeigt eine sehr komplexe Schädigungsentwicklung (lokale plastische Aktivität, hohe Rissdichte), während beim Martensit keine multiple Rissinitiierung beobachtet wird. Anhand fraktographischer Untersuchungen wird dargelegt, dass der Hauptriss beim Martensit im Bereich von Karbidanhäufungen initiiert. Im LCF-Bereich wird nur ein verschwindender Anteil der Lebensdauer mit Langrisswachstum verbracht, d. h. die martensitischen Proben versagen fast unmittelbar nach der Rissinitiierung. Die Beschreibung ihrer Lebensdauer wird somit direkt auf die Rissinitiierungsphase zurückgeführt. Das ferritisch-perlitische Gefüge hingegen zeigt im LCF-Bereich sowohl eine ausgeprägte Rissinitiierungs- wie auch Langrisswachstumsphase. Diese komplexe Schädigungsentwicklung wird mittels verschiedener Schädigungsvariablen beschrieben, die im Rahmen einer automatisierten Bildanalyse bestimmt werden. Hierbei werden sowohl plastisch stark aktive Bereiche wie auch reale Risse pauschal als Schädigung definiert. Der Vergleich dieser automatisiert bestimmten Schädigungsvariablen mit ausgewählten Rissen zeigt deren Eignung zur quantitativen Beschreibung der Schädigungsentwicklung. Die Lebensdauer einer gradierten Komponente ergibt sich nicht direkt durch Verknüpfung der Lebensdauern der Einzelphasen, sondern sie hängt ggf. auch von den Übergangsbereichen zwischen den Phasen ab. Mithilfe einiger grundlegender bruchmechanischer Überlegungen wird ein konservatives Kriterium zur Behandlung solcher Übergangsbereiche bereitgestellt, womit das LOCC-Konzept letztendlich erfolgreich auf die gradierte Flanschwelle übertragen wird.

Prebiotic evaluation of cocoa-derived flavanols in healthy humans by using a randomized, controlled, double-blind, crossover intervention study

BACKGROUND: The absorption of cocoa flavanols in the small intestine is limited, and the majority of the flavanols reach the large intestine where they may be metabolized by resident microbiota. OBJECTIVE: We assessed the prebiotic potential of cocoa flavanols in a randomized, double-blind, crossover, controlled intervention study. DESIGN: Twenty-two healthy human volunteers were randomly assigned to either a high-cocoa flavanol (HCF) group (494 mg cocoa flavanols/d) or a low-cocoa flavanol (LCF) group (23 mg cocoa flavanols/d) for 4 wk. This was followed by a 4-wk washout period before volunteers crossed to the alternant arm. Fecal samples were recovered before and after each intervention, and bacterial numbers were measured by fluorescence in situ hybridization. A number of other biochemical and physiologic markers were measured. RESULTS: Compared with the consumption of the LCF drink, the daily consumption of the HCF drink for 4 wk significantly increased the bifidobacterial (P < 0.01) and lactobacilli (P < 0.001) populations but significantly decreased clostridia counts (P < 0.001). These microbial changes were paralleled by significant reductions in plasma triacylglycerol (P < 0.05) and C-reactive protein (P < 0.05) concentrations. Furthermore, changes in C-reactive protein concentrations were linked to changes in lactobacilli counts (P < 0.05, R(2) = -0.33 for the model). These in vivo changes were closely paralleled by cocoa flavanol-induced bacterial changes in mixed-batch culture experiments. CONCLUSION: This study shows, for the first time to our knowledge, that consumption of cocoa flavanols can significantly affect the growth of select gut microflora in humans, which suggests the potential prebiotic benefits associated with the dietary inclusion of flavanol-rich foods. This trial was registered at clinicaltrials.gov as NCT01091922.

Liability of country foreignness and liability of regional foreignness: their effects on geographic diversification and firm performance

The costs of inter- and intra-regional diversification have been widely discussed in the existing international business literature, but the findings are mixed. Explanations for the mixed findings have important managerial implications, because business managers have to estimate accurately the costs of doing business within and across regions before they make their internationalization decisions. To explain the existing mixed findings, this study differentiates between liabilities of foreignness at the country and regional levels, and explores the joint effects of liability of country foreignness (LCF) and liability of regional foreignness (LRF) on the performance of internationalizing firms. Using data from 167 Canadian firms, we find that LCF may not necessarily be negatively correlated with intra-regional diversification, but LRF is positively correlated with inter-regional diversification. LCF moderates the relationship between LRF and inter-regional diversification, and also mediates the relationship between intra-regional diversification and firm performance. LRF mediates the relationship between inter-regional diversification and firm performance. Missing one or more of these variables may result in different cost estimates. Identification of the relationships between these variables helps to improve the accuracy of estimating the costs of doing business aboard.

The influence of the scout upon the decision-making process of recruited workers in three Acromyrmex species (Formicidae : Attini)

We examined how the information communicated by a scout worker influences the plant species transported by recruited workers in Acromymex balzani, Acromyrmex rugosus, and Acromyrmex crassispinus, three species of leaf-cutting ant that have different substrate and habitat preferences. We verified that certain plant species were more likely to be transported than others and that recruitment occurs. We found that recruited workers were more likely to transport non-preferred plant species when they were recruited to these by scout workers. The results suggest that the scout worker can communicate information about plant identity to recruited workers, but that recruited workers integrate the information communicated with their own experience during the decision-making process. (C) 2004 Published by Elsevier B.V.

Estudo da estrutura anatômica e das propriedades físicas e mecânicas da madeira de Corymbia (Eucalyptus) citriodora e Eucalyptus grandis

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Diagnóstico populacional e comportamental de saguis-de-tufo-preto (Callithrix penicillata) em ambiente peri-urbano

The black-tufted-marmoset (Callithrix penicillata), abundant in the southeastern state of São Paulo, is an exotic and invasive species . The present study aimed to study the behavior and make monitoring a population black-tufted-marmoset in man-made environment. The observations were made following the method of scan sampling, which consists of continuous observations with a duration of three minutes with a fifteen-minute intervals between one record and another. The individuals are monitored at two locations on campus, where two groups were identified (with a mean of 3.50 ± 2.06 individuals) totaling 291 hours and 30 minutes of observation. Were determined tree layers used, and observed that the group of EC preferably utilizes the highest stratum, while the group of LCF uses the middle and lower strata. Types of vocalization, such as calling, interaction and alert and frequency and percentage of these were also observed. The food items consumed by the groups that are similar in the two study sites, mostly sap and leaves were diagnosed. From observations of behavioral patterns was possible to construct an ethogram of the species ' Luiz de Queiroz ' campus, comprising the behaviors of vocalization, locomotion, foraging, game, among others. The results may be useful for development of management techniques and for subsequent studies

Demarcação da madeira juvenil e adulta de Corymbia citriodora

This paper had the objective of determining the transition regions between the juvenile and mature wood of Corymbia citriodora (Eucalyptus citriodora) of 29 years of age from the Experimental Station of Forest Science (EECFA-LCF/ESALQ-USP), located in Anhembi, in the State of São Paulo. The regions of juvenile and mature wood were characterized through anatomical studies - axial fiber length - following the recommendations of the International Association of Wood Anatomists (1989) using disks at the DBH of the trees. The measurements of fiber length were made in equipment for acquisition, diagnosis and image analysis. Five slices were made for every centimeter, in the radial direction and six fiber lengths per slice were measured, producing 30 measurements per sample region. In the total, 1740 lengths of fiber were measured in three disks that were studied. Results indicate a trend of accentuated and linear increase for the length of fibers, from the pith to 11 cm of radial of about 79%. Between 12 cm and 19 cm of the radius, fibers length remained almost constant, and from that point on, the fiber length tended to slightly increase to the bark. It can be concluded that for these trees, at this height of sampling, when the tree has 29 years of age, the extension of the juvenile wood goes up to 52% of its radius.

User interaction widgets for interactive theorem proving

Matita (that means pencil in Italian) is a new interactive theorem prover under development at the University of Bologna. When compared with state-of-the-art proof assistants, Matita presents both traditional and innovative aspects. The underlying calculus of the system, namely the Calculus of (Co)Inductive Constructions (CIC for short), is well-known and is used as the basis of another mainstream proof assistant—Coq—with which Matita is to some extent compatible. In the same spirit of several other systems, proof authoring is conducted by the user as a goal directed proof search, using a script for storing textual commands for the system. In the tradition of LCF, the proof language of Matita is procedural and relies on tactic and tacticals to proceed toward proof completion. The interaction paradigm offered to the user is based on the script management technique at the basis of the popularity of the Proof General generic interface for interactive theorem provers: while editing a script the user can move forth the execution point to deliver commands to the system, or back to retract (or “undo”) past commands. Matita has been developed from scratch in the past 8 years by several members of the Helm research group, this thesis author is one of such members. Matita is now a full-fledged proof assistant with a library of about 1.000 concepts. Several innovative solutions spun-off from this development effort. This thesis is about the design and implementation of some of those solutions, in particular those relevant for the topic of user interaction with theorem provers, and of which this thesis author was a major contributor. Joint work with other members of the research group is pointed out where needed. The main topics discussed in this thesis are briefly summarized below. Disambiguation. Most activities connected with interactive proving require the user to input mathematical formulae. Being mathematical notation ambiguous, parsing formulae typeset as mathematicians like to write down on paper is a challenging task; a challenge neglected by several theorem provers which usually prefer to fix an unambiguous input syntax. Exploiting features of the underlying calculus, Matita offers an efficient disambiguation engine which permit to type formulae in the familiar mathematical notation. Step-by-step tacticals. Tacticals are higher-order constructs used in proof scripts to combine tactics together. With tacticals scripts can be made shorter, readable, and more resilient to changes. Unfortunately they are de facto incompatible with state-of-the-art user interfaces based on script management. Such interfaces indeed do not permit to position the execution point inside complex tacticals, thus introducing a trade-off between the usefulness of structuring scripts and a tedious big step execution behavior during script replaying. In Matita we break this trade-off with tinycals: an alternative to a subset of LCF tacticals which can be evaluated in a more fine-grained manner. Extensible yet meaningful notation. Proof assistant users often face the need of creating new mathematical notation in order to ease the use of new concepts. The framework used in Matita for dealing with extensible notation both accounts for high quality bidimensional rendering of formulae (with the expressivity of MathMLPresentation) and provides meaningful notation, where presentational fragments are kept synchronized with semantic representation of terms. Using our approach interoperability with other systems can be achieved at the content level, and direct manipulation of formulae acting on their rendered forms is possible too. Publish/subscribe hints. Automation plays an important role in interactive proving as users like to delegate tedious proving sub-tasks to decision procedures or external reasoners. Exploiting the Web-friendliness of Matita we experimented with a broker and a network of web services (called tutors) which can try independently to complete open sub-goals of a proof, currently being authored in Matita. The user receives hints from the tutors on how to complete sub-goals and can interactively or automatically apply them to the current proof. Another innovative aspect of Matita, only marginally touched by this thesis, is the embedded content-based search engine Whelp which is exploited to various ends, from automatic theorem proving to avoiding duplicate work for the user. We also discuss the (potential) reusability in other systems of the widgets presented in this thesis and how we envisage the evolution of user interfaces for interactive theorem provers in the Web 2.0 era.

Studio dei ritmi circadiani in pazienti in stato vegetativo

Objective: To study circadian rhythms (sleep-wake, body core temperature and melatonin circadian rhythms) in patients in vegetative state (VS) in basal condition and after nocturnal blue light exposure. Methods: Eight patients in VS underwent two experimental sessions of 48 consecutive hours polysomnography with body core temperature (BCT) measurement separated by a 1-week interval. For a week between the two experimental sessions, patients underwent nocturnal blue light exposure (470 nm; 58 μW/cm2 for 4 hours from 11.30 p.m. to 3.30 a.m.). Brain MRI, Level of Cognitive Functioning Scale (LCF) and Disability Rating Scale (DRS) were assessed just before polysomnography. Results: In all patients LCF and DRS confirmed vegetative state. All patients showed a sleep-wake cycle. All patients showed spindle or spindle-like activities. REM sleep was detected in only 7 patients. Patients displayed a greater fragmentation of nocturnal sleep due to frequent awakenings. Mean nocturnal sleep efficiency was significantly reduced (40±22 vs. 74±17) in VS patients respect to controls. A significantly increasing of phase 1 and a significantly reduction of phase 2 and phase 3 were observed too. A modification of diurnal sleep total time and of diurnal duration of REM sleep were found after 1-week nocturnal blue light exposure. All patients displayed a normal BCT 24-h rhythm in basal condition and after nocturnal blue light exposure. A reduction of mean nocturnal melatonin levels in basal condition were observed in VS patients. Melatonin suppression after blue light exposure was observed in only 2 patients in VS. Conclusions: We found disorganized sleep-wake cycle and a normal BCT rhythm in our patients in VS. A reduction of mean nocturnal melatonin levels in basal condition were observed too.

Predictive-DCT Coding for 3D Mesh Sequences Compression

This paper proposes a new compression algorithm for dynamic 3d meshes. In such a sequence of meshes, neighboring vertices have a strong tendency to behave similarly and the degree of dependencies between their locations in two successive frames is very large which can be efficiently exploited using a combination of Predictive and DCT coders (PDCT). Our strategy gathers mesh vertices of similar motions into clusters, establish a local coordinate frame (LCF) for each cluster and encodes frame by frame and each cluster separately. The vertices of each cluster have small variation over a time relative to the LCF. Therefore, the location of each new vertex is well predicted from its location in the previous frame relative to the LCF of its cluster. The difference between the original and the predicted local coordinates are then transformed into frequency domain using DCT. The resulting DCT coefficients are quantized and compressed with entropy coding. The original sequence of meshes can be reconstructed from only a few non-zero DCT coefficients without significant loss in visual quality. Experimental results show that our strategy outperforms or comes close to other coders.

Proteção de linhas de transmissão de sistemas VSC-HVDC utilizando limitadores de corrente de falta

Tecnologias HVDC que utilizam conversores do tipo fonte de tensão, o VSC-HVDC, ainda não são completamente difundidas e aplicadas no Brasil, em contraste com outros países que começaram a estudar e empregar este tipo de transmissão. Comparado com o HVDC tradicional, o VSC-HVDC é uma tecnologia de transmissão mais eficiente e pode superar deficiências encontradas na transmissão em corrente contínua convencional. O VSC-HVDC pode ser utilizado de maneira mais eficiente nas novas redes de energia, para alimentar ilhas, integração de geração eólica, renovação das linhas em centros urbanos, aplicações multiterminais e conexão com sistemas fracos. Por se tratar de uma tecnologia recente, o VSC-HVDC ainda não é amplamente adotado e uma das principais limitações da utilização destes sistemas é a sua fragilidade diante faltas na linha de corrente contínua. Neste contexto, limitadores de corrente de falta (LCF) podem ser utilizados para minimizar o impacto das faltas. A ação dos limitadores é benéfica ao sistema durante condições de falta, contudo, ainda assim é necessária a atuação do sistema de proteção para extinguir a condição faltosa. Portanto, este trabalho visa propor e avaliar um novo esquema de proteção que opere de maneira seletiva e confiável para sistemas VSC-HVDC na presença de LCF baseados em materiais supercondutores ou LCF indutivos. Para tanto, foram implementadas quatro funções de proteção tradicionais das linhas em CC, a saber: direcional de corrente, diferencial, sobrecorrente com restrição de tensão e ondas viajantes, e ainda, foi proposta uma nova função de proteção, a de condutância, a qual apresentou o menor tempo de identificação de falta, considerando as faltas mais severas. Adicionalmente, foi avaliado o comportamento destas funções quando o sistema apresenta os LCF em série com a linha. Foi demonstrado que é possível extrair os benefícios dos LCF sem deteriorar a qualidade dos resultados das funções de proteção, o que aumenta a segurança e confiabilidade dos sistemas VSC-HVDC, uma vez que os impactos das faltas são minimizados e as mesmas são identificadas em um curto intervalo de tempo.

Sviluppo e applicazione di nuovi criteri per la verifica a fatica multiassiale di componenti strutturali in leghe di acciaio e alluminio

La presente Tesi ha per oggetto lo sviluppo e la validazione di nuovi criteri per la verifica a fatica multiassiale di componenti strutturali metallici . In particolare, i nuovi criteri formulati risultano applicabili a componenti metallici, soggetti ad un’ampia gamma di configurazioni di carico: carichi multiassiali variabili nel tempo, in modo ciclico e random, per alto e basso/medio numero di cicli di carico. Tali criteri costituiscono un utile strumento nell’ambito della valutazione della resistenza/vita a fatica di elementi strutturali metallici, essendo di semplice implementazione, e richiedendo tempi di calcolo piuttosto modesti. Nel primo Capitolo vengono presentate le problematiche relative alla fatica multiassiale, introducendo alcuni aspetti teorici utili a descrivere il meccanismo di danneggiamento a fatica (propagazione della fessura e frattura finale) di componenti strutturali metallici soggetti a carichi variabili nel tempo. Vengono poi presentati i diversi approcci disponibili in letteratura per la verifica a fatica multiassiale di tali componenti, con particolare attenzione all'approccio del piano critico. Infine, vengono definite le grandezze ingegneristiche correlate al piano critico, utilizzate nella progettazione a fatica in presenza di carichi multiassiali ciclici per alto e basso/medio numero di cicli di carico. Il secondo Capitolo è dedicato allo sviluppo di un nuovo criterio per la valutazione della resistenza a fatica di elementi strutturali metallici soggetti a carichi multiassiali ciclici e alto numero di cicli. Il criterio risulta basato sull'approccio del piano critico ed è formulato in termini di tensioni. Lo sviluppo del criterio viene affrontato intervenendo in modo significativo su una precedente formulazione proposta da Carpinteri e collaboratori nel 2011. In particolare, il primo intervento riguarda la determinazione della giacitura del piano critico: nuove espressioni dell'angolo che lega la giacitura del piano critico a quella del piano di frattura vengono implementate nell'algoritmo del criterio. Il secondo intervento è relativo alla definizione dell'ampiezza della tensione tangenziale e un nuovo metodo, noto come Prismatic Hull (PH) method (di Araújo e collaboratori), viene implementato nell'algoritmo. L'affidabilità del criterio viene poi verificata impiegando numerosi dati di prove sperimentali disponibili in letteratura. Nel terzo Capitolo viene proposto un criterio di nuova formulazione per la valutazione della vita a fatica di elementi strutturali metallici soggetti a carichi multiassiali ciclici e basso/medio numero di cicli. Il criterio risulta basato sull'approccio del piano critico, ed è formulato in termini di deformazioni. In particolare, la formulazione proposta trae spunto, come impostazione generale, dal criterio di fatica multiassiale in regime di alto numero di cicli discusso nel secondo Capitolo. Poiché in presenza di deformazioni plastiche significative (come quelle caratterizzanti la fatica per basso/medio numero di cicli di carico) è necessario conoscere il valore del coefficiente efficace di Poisson del materiale, vengono impiegate tre differenti strategie. In particolare, tale coefficiente viene calcolato sia per via analitica, che per via numerica, che impiegando un valore costante frequentemente adottato in letteratura. Successivamente, per validarne l'affidabilità vengono impiegati numerosi dati di prove sperimentali disponibili in letteratura; i risultati numerici sono ottenuti al variare del valore del coefficiente efficace di Poisson. Inoltre, al fine di considerare i significativi gradienti tensionali che si verificano in presenza di discontinuità geometriche, come gli intagli, il criterio viene anche esteso al caso dei componenti strutturali intagliati. Il criterio, riformulato implementando il concetto del volume di controllo proposto da Lazzarin e collaboratori, viene utilizzato per stimare la vita a fatica di provini con un severo intaglio a V, realizzati in lega di titanio grado 5. Il quarto Capitolo è rivolto allo sviluppo di un nuovo criterio per la valutazione del danno a fatica di elementi strutturali metallici soggetti a carichi multiassiali random e alto numero di cicli. Il criterio risulta basato sull'approccio del piano critico ed è formulato nel dominio della frequenza. Lo sviluppo del criterio viene affrontato intervenendo in modo significativo su una precedente formulazione proposta da Carpinteri e collaboratori nel 2014. In particolare, l’intervento riguarda la determinazione della giacitura del piano critico, e nuove espressioni dell'angolo che lega la giacitura del piano critico con quella del piano di frattura vengono implementate nell'algoritmo del criterio. Infine, l’affidabilità del criterio viene verificata impiegando numerosi dati di prove sperimentali disponibili in letteratura.

Corneal pachymetry in normal and keratoconic eyes:Orbscan II versus ultrasound

Purpose: To compare corneal thickness measurements using Orbscan II (OII) and ultrasonic (US) pachymetry in normal and in keratoconic eyes. Setting: Eye Department, Heartlands and Solihull NHS Trust, Birmingham, United Kingdom. Methods: Central corneal thickness (CCT) was measured by means of OII and US pachymetry in 1 eye of 72 normal subjects and 36 keratoconus patients. The apical corneal thickness (ACT) in keratoconus patients was also evaluated using each method. The mean of the difference, standard deviation (SD), and 95% limits of agreement (LoA = mean ± 2 SD), with and without applying the default linear correction factor (LCF), were determined for each sample. The Student t test was used to identify significant differences between methods, and the correlation between methods was determined using the Pearson bivariate correlation. Bland-Altman analysis was performed to confirm that the results of the 2 instruments were clinically comparable. Results: In normal eyes, the mean difference (± 95% LoA) in CCT was 1.04 μm ± 68.52 (SD) (P>.05; r = 0.71) when the LCF was used and 46.73 ± 75.40 μm (P = .0001; r = 0.71) without the LCF. In keratoconus patients, the mean difference (± 95% LoA) in CCT between methods was 42.46 ± 66.56 μm (P<.0001: r = 0.85) with the LCF, and 2.51 ± 73.00 μm (P>.05: r = 0.85) without the LCF. The mean difference (± 95% LoA) in ACT for this group was 49.24 ± 60.88 μm (P<.0001: r = 0.89) with the LCF and 12.71 ± 68.14 μm (P = .0077; r = 0.89) when the LCF was not used. Conclusions: This study suggests that OII and US pachymetry provide similar readings for CCT in normal subjects when an LCF is used. In keratoconus patients, OII provides a valid clinical tool for the noninvasive assessment of CCT when the LCF is not applied. © 2004 ASCRS and ESCRS.