Teos yhteiskuntatiedollisen kasvatuksen teoriasta ja käytännöstä

Teema: akateeminen opettajankoulutus.

Sten Sture den äldre

Tekijä lopusta: G. E. L.

Residual stresses in TiN, DLC and MoS(2) coated surfaces with regard to their tribological fracture behaviour

Thin hard coatings on components and tools are used increasingly due to the rapid development in deposition techniques, tribological performance and application skills. The residual stresses in a coated surface are crucial for its tribological performance. Compressive residual stresses in PVD deposited TiN and DLC coatings were measured to be in the range of 0.03-4 GPa on steel substrate and 0.1-1.3 GPa on silicon. MoS(2) coatings had tensional stresses in the range of 0.8-1.3 on steel and 0.16 GPa compressive stresses on silicon. The fracture pattern of coatings deposited on steel substrate were analysed both in bend testing and scratch testing. A micro-scale finite element method (FEM) modelling and stress simulation of a 2 mu m TiN-coated steel surface was carried out and showed a reduction of the generated tensile buckling stresses in front of the sliding tip when compressive residual stresses of 1 GPa were included in the model. However, this reduction is not similarly observed in the scratch groove behind the tip, possibly due to sliding contact-induced stress relaxation. Scratch and bending tests allowed calculation of the fracture toughness of the three coated surfaces, based on both empirical crack pattern observations and FEM stress calculation, which resulted in highest values for TiN coating followed by MoS(2) and DLC coatings, being K(C) = 4-11, about 2, and 1-2 MPa M(1/2), respectively. Higher compressive residual stresses in the coating and higher elastic modulus of the coating correlated to increased fracture toughness of the coated surface. (C) 2009 Elsevier B.V. All rights reserved.

Social inequalities and mortality in Europe-results from a large multi-national cohort

BACKGROUND Socio-economic inequalities in mortality are observed at the country level in both North America and Europe. The purpose of this work is to investigate the contribution of specific risk factors to social inequalities in cause-specific mortality using a large multi-country cohort of Europeans. METHODS A total of 3,456,689 person/years follow-up of the European Prospective Investigation into Cancer and Nutrition (EPIC) was analysed. Educational level of subjects coming from 9 European countries was recorded as proxy for socio-economic status (SES). Cox proportional hazard model's with a step-wise inclusion of explanatory variables were used to explore the association between SES and mortality; a Relative Index of Inequality (RII) was calculated as measure of relative inequality. RESULTS Total mortality among men with the highest education level is reduced by 43% compared to men with the lowest (HR 0.57, 95% C.I. 0.52-0.61); among women by 29% (HR 0.71, 95% C.I. 0.64-0.78). The risk reduction was attenuated by 7% in men and 3% in women by the introduction of smoking and to a lesser extent (2% in men and 3% in women) by introducing body mass index and additional explanatory variables (alcohol consumption, leisure physical activity, fruit and vegetable intake) (3% in men and 5% in women). Social inequalities were highly statistically significant for all causes of death examined in men. In women, social inequalities were less strong, but statistically significant for all causes of death except for cancer-related mortality and injuries. DISCUSSION In this European study, substantial social inequalities in mortality among European men and women which cannot be fully explained away by accounting for known common risk factors for chronic diseases are reported.

The efficacy and safety of a third anti-TNF monoclonal antibody in Crohn's disease after failure of two other anti-TNF antibodies.

BACKGROUND: Adalimumab (ADA) and certolizumab pegol (CZP) have demonstrated efficacy in Crohn's disease (CD) patients previously treated with infliximab (IFX). AIM: To assess the efficacy and tolerability of a third anti-TNF in CD after failure of and/or intolerance to two different anti-TNF antibodies. METHODS: Crohn's disease patients who received ADA or CZP after loss of response and/or intolerance to two anti-TNF agent were included in this retrospective study. Data were collected using a standardized questionnaire. Clinical response, duration, safety and reasons for discontinuation were assessed. RESULTS: Sixty-seven patients treated with CZP (n = 40) or ADA (n = 27) were included. A clinical response was observed in 41 (61%) at week 6 and 34 patients (51%) at week 20. The probability of remaining under treatment at 3 months, 6 months and 9 months was 68%, 60% and 45%, respectively. At the end of follow-up, the third anti-TNF had been stopped in 36 patients for intolerance (n = 13), or failure (n = 23). Two deaths were observed. CONCLUSIONS: The treatment with a third anti-TNF (CZP or ADA) agent of CD patients, who have experienced loss of response and/or intolerance to two anti-TNF antibodies, has favourable short-term and long-term efficacy. It is an option to be considered in patients with no other therapeutic options.

Comparison of methods for estimation of needle losses in Scots pine following defoliation by Bupalus piniaria

Abstract

Research on Latvian Herrnhutism in the inter-war period

Kirjallisuusarvostelu

Anthologium epigrammatum Graecorum 2:8

Painovuosi nimekkeestä.

The effects of moisture, cation concentration, temperature, density and composition of soils on their electrical resistivity

The effects. of moisture, cation concentration, dens ity , temper~ t ure and grai n si ze on the electrical resistivity of so il s are examined using laboratory prepared soils. An i nexpen si ve method for preparing soils of different compositions was developed by mixing various size fractions i n the laboratory. Moisture and cation c oncentration are related to soil resistivity by powe r functions, whereas soil resistiv ity and temperature, density, Yo gravel, sand , sil t, and clay are related by exponential functions . A total of 1066 cases (8528 data) from all the experiments were used in a step-wise multiple linear r egression to determine the effect of each variable on soil resistivity. Six variables out of the eight variables studied account for 92.57/. of the total variance in so il resistivity with a correlation coefficient of 0.96. The other two variables (silt and gravel) did not increase the · variance. Moisture content was found to be - the most important Yo clay. variable- affecting s oil res istivi ty followed by These two variables account for 90.81Yo of the total variance in soil resistivity with a correlation ~oefficient ·.of 0 . 95. Based on these results an equation to ' ~~ed{ ct soil r esist ivi ty using moisture and Yo clay is developed . To t est the predicted equation, resistivity measurements were made on natural soils both in s i tu a nd i n the laboratory. The data show that field and laboratory measurements are comparable. The predicted regression line c losely coinciqes with resistivity data from area A and area B soils ~clayey and silty~clayey sands). Resistivity data and the predicted regression line in the case of c layey soils (clays> 40%) do not coincide, especially a t l ess than 15% moisture. The regression equation overestimates the resistivity of so i l s from area C and underestimates for area D soils. Laboratory prepared high clay soils give similar trends. The deviations are probably caused by heterogeneous distribution of mo i sture and difference in the type o f cl ays present in these soils.

A simple analysis of thermodynamic properties for classical plasmas: I. theory

By eliminating the short range negative divergence of the Debye–Hückel pair distribution function, but retaining the exponential charge screening known to operate at large interparticle separation, the thermodynamic properties of one-component plasmas of point ions or charged hard spheres can be well represented even in the strong coupling regime. Predicted electrostatic free energies agree within 5% of simulation data for typical Coulomb interactions up to a factor of 10 times the average kinetic energy. Here, this idea is extended to the general case of a uniform ionic mixture, comprising an arbitrary number of components, embedded in a rigid neutralizing background. The new theory is implemented in two ways: (i) by an unambiguous iterative algorithm that requires numerical methods and breaks the symmetry of cross correlation functions; and (ii) by invoking generalized matrix inverses that maintain symmetry and yield completely analytic solutions, but which are not uniquely determined. The extreme computational simplicity of the theory is attractive when considering applications to complex inhomogeneous fluids of charged particles.

Folkmusikundervisningen på fiol och gitarr och dess historiska rötter

How folk musicians of today learn to play their instruments is an over-all question in this article. One violin lesson and one guitar lesson have been observed at Framnäs folk high school. Three research questions were formulated. What do the two lessons have in common? What are the differences? How could the folk music education of today be related to the Swedish fiddler movement in the 1920s and other folk music traditions? Theoretically, the interpretation of the results was based on the mimesis theory of Ricoeur. Two teachers and three students participated in the study. The results showed that the lessons were structured in a similar way and dominated by master apprenticeship teaching. The violin teacher showed a more respectful attitude towards the tradition compared to the guitar teacher. Great parts of the manifest ideology of the fiddler movement seems to have become concealed into a latent or frozen ideology in the formal folk music education of today. There seems to be no big differences between learning the music by way of visiting an older fiddler hundred years ago compared to the study of music today at a formal institution.

Performance evaluation of ventilation radiators

A ventilation radiator is a combined ventilation and heat emission unit currently of interest due to its potential for increasing energy efficiency in exhaust ventilated buildings with warm water heating. This paper presents results of performance tests of several ventilation radiator models conducted under controlled laboratory conditions.   The purpose of the study was to validate results achieved by Computational Fluid Dynamics (CFD) in an earlier study and indentify possible improvements in the performance of such systems. The main focus was on heat transfer from internal convection fins, but comfort and health aspects related to ventilation rates and air temperatures were also considered.   The general results from the CFD simulations were confirmed; the heat output of ventilation radiators may be improved by at least 20 % without sacrificing ventilation efficiency or thermal comfort.   Improved thermal efficiency of ventilation radiators allows a lower supply water temperature and energy savings both for heating up and distribution of warm water in heat pumps or district heating systems. A secondary benefit is that a high ventilation rate can be maintained all year around without risk for cold draught.