Raman spectroscopic study of the minerals apophyllite-(KF) KCa4Si8O20F.8H2O and apophyllite-(KOH) KCa4Si8O20(F,OH).8H2O

Raman spectroscopy complimented with infrared spectroscopy has been used to study the variation in molecular structure of two minerals of the apophyllite mineral group, namely apophyllite-(KF)KCa4Si8O20F.8H2O and apophyllite-(KOH) KCa4Si8O20(F,OH).8H2O. apophyllite-(KF) and apophyllite-(KOH) are different minerals only because of the difference in the percentage of fluorine to hydroxyl ions. The Raman spectra are dominated by a very intense sharp peak at 1059 cm -1. A band at around 846 cm -1 is assigned to the water librational mode. It is proposed that the difference between apophyllite-(KF) and apophyllite-(KOH) is the observation of two Raman bands in the OH stretching region at around 3563 and 3625 cm -1. Multiple water stretching and bending modes are observed showing that there is much variation in hydrogen bonding between water and the silicate surfaces.

Thermoanalytical study of the minerals apophyllite-(KF) KCa4Si8O20F·8H2O and apophyllite-(KOH) KCa4Si8O20(F,OH)·8H2O

The name apophyllite refers to a specific group of phyllosilicates, a class of minerals that also includes the micas and are a class of minerals of similar chemical makeup that comprise a solid solution series, and includes the members apophyllite-(KF), apophyllite-(KOH) and apophyllite-(NaF). Fluorapophyllite apophyllite-(KF) and hydroxyapophyllite apophyllite-(KOH) are different minerals only because of the difference in percentages of fluorine to hydroxyl ions. Three apophyllite minerals have been characterised by thermogravimetric analysis and infrared spectroscopy. Dehydration takes place in several steps. Major mass losses occur at around 205–220 °C and at 400–429 °C. Minor mass losses are observed around 242–292 °C. It is proposed that dehydration occurs in the first decomposition step. Water is lost over the temperature range 125–250, 250–325 and 325–525 °C with the loss of 4.5, 0.5 and 3.0 mol of water. Water functions as zeolitic water and is also coordinated to the silica surfaces.

A comparison between bagasse and water efficient alternatives using KOH/AQ pulping

Numerous crops grow in sugar regions that have the potential to increase the amount of biomass available to a small bagasse-based pulp factory. Arundo donax and Sorghum offer unique advantages to farmers compared to other agricultural crops. Sorghum bicolour requires only 1/3 of the water of sugarcane. Arundo donax is a very high yield crop, it can also grow with little water but it has the further advantage in that it is also highly stress tolerant, making it suitable for land which is unsuited to other crops. Pulps produced from these crops were benchmarked against sugarcane bagasse pulp. Arundo, sorghum and bagasse were pulped using KOH and anthraquinone to 20 Kappa number so as to produce a bleachable pulp which is suitable for making photocopier paper and tissue products. The unbleached sorghum pulp has better tensile strength properties than the unbleached Arundo pulp (43.8 Nm/g compared to 21.4 Nm/g) and the bleached sorghum pulp tensile strength was similar to bagasse (28.4 Nm/g). At 20 Kappa number, sorghum pulp had acceptable yield for a non-wood fibre (45% c.f. 55% for bagasse), Arundo donax pulp had low tensile strength, and relatively low yield (38.7%), even for an agricultural fibre and required severe cooking conditions to achieve similar delignification to sugarcane bagasse or sorghum. Sorghum and Arundo donax produced thicker handsheets than bagasse (>160 µm c.f. 122 µm for bagasse). In preliminary experiments sorghum and bagasse responded slightly better to Totally Chlorine Free peroxide bleaching (QPP), although none achieved a satisfactory brightness level and further improvement would be required to produce a bleached pulp.

Topology Optimization of Micromachined Structures with the Manufacturing Constraints of KOH Etching of (110) Silicon

The focus of this paper is on designing useful compliant micro-mechanisms of high-aspect-ratio which can be microfabricated by the cost-effective wet etching of (110) orientation silicon (Si) wafers. Wet etching of (110) Si imposes constraints on the geometry of the realized mechanisms because it allows only etch-through in the form of slots parallel to the wafer's flat with a certain minimum length. In this paper, we incorporate this constraint in the topology optimization and obtain compliant designs that meet the specifications on the desired motion for given input forces. Using this design technique and wet etching, we show that we can realize high-aspect-ratio compliant micro-mechanisms. For a (110) Si wafer of 250 µm thickness, the minimum length of the etch opening to get a slot is found to be 866 µm. The minimum achievable width of the slot is limited by the resolution of the lithography process and this can be a very small value. This is studied by conducting trials with different mask layouts on a (110) Si wafer. These constraints are taken care of by using a suitable design parameterization rather than by imposing the constraints explicitly. Topology optimization, as is well known, gives designs using only the essential design specifications. In this work, we show that our technique also gives manufacturable mechanism designs along with lithography mask layouts. Some designs obtained are transferred to lithography masks and mechanisms are fabricated on (110) Si wafers.

Low temperature synthesis of layered NaxCoO2 and KxCoO2 from NaOH/KOH fluxes and their ion exchange properties

We report a low temperature synthesis of layered Na0×20CoO2 and K0×44CoO2 phases from NaOH and KOH fluxes at 400°C. These layered oxides are employed to prepare hexagonal HCoO2, LixCoO2 and Delafossite AgCoO2 phases by ion exchange method. The resulting oxides were characterised by powder X-ray diffraction, X-ray photoelectron spectroscopy, SEM and EDX analysis. Final compositions of all these oxides are obtained from chemical analysis of elements present. Na0×20CoO2 oxide exhibits insulating to metal like behaviour, whereas AgCoO2 is semiconducting.

A livelihoods study of farmers and fishers in Koh Chbar Village Kratie Province

This is the report of a livelihoods study team working together with villagers from Koh Chbar Village in Kratie Province, Cambodia, to find out about the livelihoods of farmers and fishers. It is based on information provided by the villagers who shared their knowledge and raised real issues related to their livelihoods. [PDF contains 37 pages.]

A livelihoods study of farmers and fishers in Koh Reusey Village Kampong Chhnang Province

This is the report of a livelihoods study conducted in Koh Reusey Village, Prorlay Meas Commune, Kampong Leng District, Kampong Chhnang Province. The main objective of the study was to understand the villagers’ lives, their standards of living, the hardships they experience, external impacts on their lives, and current and future needs. The livelihoods team spent five days in the village from 27 June to 1 July 2002 and worked with 60 villagers. These included men, women, younger and older villagers. One hundred and thirty-five families in the village were represented. [PDF contains 21 pages]

Diffractive microlens with a cascade focal plane fabricated by single mask UV-photolithography and common KOH:H2O etching

A diffractive microlens with a cascade focal plane along the main optical axis of the device is fabricated using a low-cost technique mainly including single mask ultraviolet (UV) photolithography and dual-step KOH:H2O etching. Based on the evolutionary behavior of converse pyramid-shaped microholes (CPSMs) preshaped over a {100}-oriented silicon wafer in KOH etchant, the first-step KOH etching is performed to transfer initial square micro-openings in a SiO2 film grown by plasma enhanced chemical vapor deposition (PECVD) and patterned by single mask UV-photolithography, into CPSMs with needed dimension. After completely removing a thinned SiO2 mask, basic annular phase steps with a relatively steep sidewall and scheduled height can be shaped in the overlapped etching region between the neighboring silicon concave-arc microstructures evolved from CPSMs through the second-step KOH etching. Morphological measurements demonstrate a desirable surface of the silicon microlens with a roughness in nanometer scale and the feature height of the phase steps formed in the submicrometer range. Conventional optics measurements of the plastic diffractive microlens obtained by further hot embossing the fine microrelief phase map over the nickel mask made through a common electrochemical method indicate a highly efficient cascaded focusing performance.

„Alles hat seine Stunde. Für jedes Geschehen unter dem Himmel gibt es eine bestimmte Zeit“ (Koh 3,1)

Armut/Reichtum, Arbeit, Glück, Tod, Gott und Mensch sowie Zeit – Dies alles sind Themen, die als existentiell bezeichnet werden können. Mit ihnen beschäftigt sich das alttestamentliche Buch Kohelet, das ca. zwischen 250 und 190 v. Chr. entstanden ist. Trotz des Alters dieses Buches behandelt Kohelet Fragen, die hoch aktuell sind: Gibt es einen Gott? Greift dieser ein? Ist Reichtum etwas Erstrebenswertes? Warum mühen wir uns so ab, wenn wir doch sowieso sterben und all das Erarbeitete hinterlassen müssen? Und haben wir überhaupt Entscheidungs- und Handlungsfreiheit? Ist nicht vielleicht sogar alles von Gott bestimmt? Die Fragen hängen eng mit dem eigenen Selbstbild zusammen. Besonders im Jugendalter befindet sich der Mensch auf der Suche nach einer Identität, nach Erkenntnissen und einer eigenen Weltanschauung. Kohelets Fragen gewinnen in dieser Zeit an Relevanz. Das alttestamentliche Buch kann insbesondere in dieser Lebensphase fruchtbar gemacht werden und anregend sein. Es kann Heranwachsende dazu auffordern, das bisherige Selbstbild und die eigene Weltanschauung zu hinterfragen. Aus diesen Überlegungen heraus ergibt sich das Buch Kohelet als wertvoller Gesprächspartner Jugendlicher. Daneben erscheint es auch naheliegend, Jugendliche mit Kohelet ins Gespräch zu bringen, weil der Adressat des Buches nach Schmitz der junge Erwachsene sei (vgl. Schmitz, 2004, S. 325). Obwohl eine Relevanz des Buches für Jugendliche auszumachen ist, kann das Buch Kohelet bisher als „bibeldidaktisches Stiefkind“ (G. Langenhorst, 2004, S. 317) angesehen werden. Vereinzelt finden sich Umsetzungsvorschläge des Buches im Unterricht. In Lehrplänen wird es jedoch kaum aufgegriffen. Hinzu kommt, dass sich kaum Ausführungen dazu finden, wie Jugendliche die Gedanken Kohelets überhaupt verstehen. Aus diesem Grund hat die vorliegende Arbeit das Ziel, dies in Erfahrung zu bringen. Um die Ausgangsfrage zu beantworten, wurde eine empirische Untersuchung der Rezeption durchgeführt. Dabei wurde das Zeitgedicht des Koheletbuches fokussiert, das das menschliche Leben als Ganzes thematisiert und implizit ein Menschenbild entfaltet. Über die Frage der Rezeption durch OberstufenschülerInnen hinaus, möchte die Arbeit auch Rückschlüsse auf eine mögliche Beschäftigung mit Kohelet im Religionsunterricht schließen. Zunächst wird das hier grundgelegte Verständnis von Textrezeption erläutert. Daraufhin wird der Blick auf die Texteinheit gerichtet. Diese wird eingehend exegetisch untersucht, wobei auch die verschiedenen Lesarten thematisiert werden. In einem nächsten Kapitel rücken die SchülerInnen als Adoleszente ins Zentrum, woraufhin die Untersuchung des Dialogs zwischen Text und SchülerInnen und somit der Rezeption vollzogen wird. Den Schluss bildet ein Fazit mit einem Ausblick.

Isotropic petroleum pitch as a carbon precursor for the preparation of activated carbons by KOH activation

Results show that it is possible to activate a low softening point isotropic petroleum pitch, without intermediate pre-treatments, by chemical activation with KOH. The chemical activation is carried out by direct heat treatment of a mixture of the isotropic pitch and KOH. It produces activated carbons (ACs) with micropore volumes as high as 1.12 cm3/g, and BET surface areas around 3000 m2/g. The activating agent/precursor ratios studied (from 1/1 to 4/1; wt./wt.) show, as expected, that increasing the ratio enhances the adsorption characteristics of the resulting AC.