An annotated bibliography on the biological effects of constructing channels, jetties, and other coastal structures /

Includes index.

Coastal response to the Port Sheldon jetties at Pigeon Lake, Michigan /

Cover title.

Wave loading on vertical sheet-pile groins and jetties /

"January 1981."

Periodic inspection of jetties at Manasquan Inlet, New Jersey : armor unit monitoring for period 1994-1998 /

Includes bibliographical references: (p. 60).

Control of alluvial rivers by steel jetties /

Mode of access: Internet.

History of the Fisheries of Raritan Bay, New York and New Jersey

Raritan Bay is the body of water bounded by New York and New Jersey and lying immediately south of New York City (Fig. 1). It has close proximity to the most concentrated urban and industrial area in the United States. Its history has been one of extensive multiple use by the surrounding human population. Dating from the precolonial and colonial periods, people have employed many types of gear to catch and gather its once abundant fishes and shellfishes. Its beaches were once popular for sun bathing and swimming, but after the 1940's they were essentially abandoned because the water became too polluted. Another large use has been for pleasure boating and the transit and dockage of merchant, passenger, and military vessels. Channels and basins were dug in the bay, bulkheads and jetties were constructed along its shores, and it was a donor source of sand and gravel for construction projects. It has also been a receptor for large quantities of domestic and industrial wastes and, mainly for this reason, it is one ofthe most deteriorated estuaries in the United States.

National report of the frame survey 2006 in the Ugandan part of Lake Victoria

Fisheries Frame surveys have been carried out on Lake Victoria biannually since 2000 to determine· the number of fishers, fish landing sites, facilities at the landing sites. Information on the composition fishing crafts, their mode of propulsion, fishing gears and the fish species they target is also collected. This information is used to guide development and management of the lake's fisheries. The results of the four surveys carried out since 2000 show that the number of landing sites has decreased by 24% from 597 in 2000 to 481 in 2006, mainly as result of reorganisation of landing sites into Beach Management Units (BMUs). The fish landing sites continue to have inadequate facilities to service the fisheries industry e.g. in the 2006 survey only 11.2% of landing sites had fish shades; <0.6% had cold rooms; 3.5% had electricity; and only 35.5% had toilet facilities. Similarly, only 11.4% of landing sites had portable water; 2.5% had jetties, 3.7% had 'fish stores; and 36% were accessible by all weather roads. There is need to improve facilities servicing fisheries at landing sites, with major emphasis on sanitary facilities, especially toilets and portable water. The BMUs should be sensitised to prioritise the construction and utilisation of public toilet facilities at their respective landing sites. The ultimate aim should be to have public toilets at all fish landing sites. The trend of the various indicators of fishing effort has continued upwards: The total number of fishers increased by 43.5% from 37,721 in 2004 to 54,148 in 2006 and the number of fishing crafts increased (43.9%) from 16,775 in 2004 to 24,148 in 2006 over the same period. The total number of gillnets increased by 28.6% from 458,597 in 2004 to 589,777 in 2006 and the number of long line hooks increased by 136% from 968,848 to 2,285,609. The number of fishing crafts using outboard engines also increased from 3,173 in 2004 to 5,047 in 2006 suggesting that more fishers were going far in search of fish. There is still a large number of illegal gears especially beach seines, which increased by 58.8% from 954 in 2004 to 1420 in 2006. Efforts to remove these very destructive gears should be stepped up. There was also larger increase in number of illegal gillnets <5 inch mesh size. These increased by 63% from 56,246 in 2004 to 91,740 in 2006 compared with 23.8% increase of gillnets ~5 inch mesh size. There were also large increases in the numbers of gillnets of 5 and 5% inch mesh size, which increased by 48% and 130% from 2004 to 2006 implying a trend towards use of smaller gillnet mesh sizes. The number of traps which are used in shallow vegetated areas, flood plains and river mouths to target tilapiines and riverine species decreased drastically from 5,361 traps in 2004 to only 499 traps in 2006, a decrease of 974%, a phenomenon attributed to the receding water levels which have left the shallow vegetated areas dry. A total of 17,475 fishing crafts, 72% of all fishing crafts, in the Ugandan part of the lake are still using paddles and the. number of parachute crafts is also still very high, (Le. 5,064) comprising a high proportion (21 %) of the total number of fishing. There is need to promote the use of large fishing crafts with sails or a combination of sail and outboard motor. The Mukene fishery in the Ugandan waters of Lake Victoria has remained underdeveloped with only 9% of all fishing crafts operating in this fishery. Also less than 2% of fishing crafts with sails or motor operate in this fishery which implies that it is limited to near shore waters. Effort should be made to develop this fishery as it appears to have high potential, especially in deep offshore waters which are hardly fished.

the ebb-tidal delta of the venice lagoon,Italy

Very high-resolution seismic lines were collected offshore the Venice Lagoon in the framework of the Co.Ri.La'New very high resolution seismic methods to study the Venice Lagoon subsoil' project. The 140 km boomer profiles led to the identification of a convex-upward,lens-shaped body just outside the Lido inlet,one of the three lagoon inlets,which has been interpreted as an ebb-tidal delta.The comparison between the scismostratigraphic setting og this deposit, as revealed by the seismic lines,and the analyses of historicalbathymetric maps highlighted the key role of human interventions in the formation and evolution of the Lido inlet cbb-tidal delta.To preserve the lagoon environment but also to ensure a navigable way, human interventions at the Lidoinlet,performed since the fourteenth centtury, caused profound variations in the inlet dynamics,ldading to a progressive increase in the sediment dispersion from the lagoon interior towards the sea. The ebb-tidal delta of the Lido nilet is thus a very recent feature compared with the formation of the Venice lagoon and formed mainly as a consequence of the construction of the two jetties that have bound the inlet form AD 1886 to the present day.

Under-water scene investigation using ground penetrating radar (GPR) in the search for a sunken jet ski, Northern Ireland

A search for a submerged jet ski and the lost limb of its driver involved in a collision with a speedboat was made in a shallow lake in Northern Ireland. The location of both was crucial to establishing events at the time of the accident. Local intelligence suggested both objects were likely to be partially-buried by lacustrine silt. To avoid sediment churning, this required non-invasive, completely non-destructive assessment and mapping of the scene. A MALA RAMAC ground-penetrating radar system (GPR) mounted on floats for surveying from walkways and jetties or placed in a small rubber dinghy for offshore profiling was used. A grid was established and each line surveyed with 100, 200 and 400MHz antennae. In waters over 6m deep GPR data showed the form of the lake floor but excessive ringing occurred in the data. In waters less than 6m deep ringing diminished on both 100 and 200MHz data, the latter displaying the best trade-off between depth penetration and horizontal object resolution. 400MHz data failed to be of use in waters over 2m deep and at these depths showed only limited improvement of image quality compared to 200MHz data. Surface objects such as a wooden walkway caused interference on 200 and 400MHz data when antennae were oriented both normal and parallel to survey direction; this may be a function of the low attenuation of radar waves in freshwater, allowing excellent lateral and vertical radar wave penetration. On 200MHz data the damaged jet-ski was clearly imaged in a location that contradicted the speedboat driver's account of the accident.

Numerical Modelling of Hydrodynamic Changes Induced by a Jetty Extension: the Case of Ria de Aveiro (Portugal)

Tidally induced currents in estuarine flows are usually modulated by the tidal regime and respond differently to changes imposed to its natural propagation due to geomorphologic alterations. Some of these changes are due to the implementation of heavy engineering works, most of the times imposed by navigation needs associated with harbours growth. The main purpose of this study is to evaluate the hydrodynamic response of Ria de Aveiro to an alteration on the present geometry of its inlet, which was artificially delimited in 1808 through the construction of two jetties. In order to provide access to deeper draft vessels to the Aveiro harbour, its Administration intends to create better conditions for navigation through the extension by 200 m of the north jetty. A bidimensional hydrodynamic model SIMSYS2D was used in this study to simulate two distinct situations: the actual Ria de Aveiro configuration (2009), which is used as reference, and other including the future inlet configuration with the jetty extension. Several simulations were performed, using both bathymetries and considering extreme tidal conditions as forcing on the model oceanic open boundary. The tidal prism at the lagoon mouth and at the main lagoon channels was determined. Values of sea surface elevation and horizontal current velocity were comparatively analyzed as well as harmonic analysis results. The results for the projected inlet increase comparatively to those for the present configuration, although the differences found are not significant for most of the cases analyzed. More studies should be performed in order to clarify the long term impact of these works on the lagoon hydrodynamics.

Recreational shore fishing in southern Portugal: biological and socio-economic aspects and perspectives for management

Although overfishing is a concern for many fish stocks, it was for a long time only associated with commercial fishing exploitation, with less or no attention being given to the recreational fisheries. Recent research has shown however that the impact of recreational fishing on particular species can be considerable, and that the recreational harvest needs to be taken into account if fisheries are to be accurately assessed and effectively managed. In Portugal, the first recreational fishing regulations were only recently implemented. However, mirroring other European countries, regulations lacked scientific support, and specific knowledge of the activity was limited to a few studies with limited coverage. This thesis aimed to characterize the biological and socioeconomic aspects of the recreational shore angling activity in southern Portugal, to investigate whether the regulations in place were adequate and effective, and to provide recommendations for improved management and conservation of the inshore fisheries resources. A combined aerial-roving survey was conducted to gather data on fishing effort, catch, fishing trips and socioeconomic aspects (including anglers’ perceptions of regulations) of the recreational angling activity. The analysis of anglers’ catches suggested that compliance with daily bag limits was high, with less than 0.5% of creels exceeding the 10 kg angler-1 day-1 bag limit. Overall, 11.5% of the retained fishes were undersized, but non-compliance with minimum size limits was found to be high for some species (e.g. seabass, 73% undersized). In terms of the impact of recreational shore angling, the total estimated catches corresponded to less than 1% of the commercial landings for the same period (shared species). However, shore angling catches for white sea bream (Diplodus sargus) were found to be considerable, corresponding to 65% of the commercial landings (39.4% of total catch). In terms of anglers’ perceptions about the recreational fishing regulations in Portugal, the present study has shown that the majority of anglers accepted the existence of some kind of SRF regulations, but in general there was a partial or total disagreement with the recreational fishing restrictions recently put in place. Most anglers perceived themselves as not being involved in the decision-making process and claimed that some restrictions lacked a meaningful rationale (e.g. prohibition of fishing from piers/jetties). Fishers’ awareness with regard to specific aspects of the restrictions (such as the rationale for minimum size limits) was found to be very limited. During the same period, catches from sport fishing competitions were examined to test for differences with the recreational activity in terms of catches, and evaluate long term trends in catch and mean size of fish. Catches of the sport fishing competitions were found to be different from those observed for recreational fishing, being dominated by different species (e.g. garfish, mullets), and suggesting different fishing strategies of the the two types of anglers. High percentages of undersized fish were observed to be captured (and retained) during the competitions (in particular seabass, with 100% undersized), probably as a result of a single allowable minimum size (AMS) of 15 cm for all species in use in competitions. Lastly, catch and release fishing experiments were carried out to assess post-release mortality of three recreationally important species: two banded sea bream Diplodus vulgaris; black sea bream Spondyliosoma cantharus; and gilthead sea bream Sparus aurata. Post-release mortalities were found to be low (0-12%). The main predictor of mortality for Sparus aurata was anatomical hooking location, with 63% of the fishes that died being deeply hooked. The results support the release of fish, either from mandatory (e.g. minimum landing sizes) or voluntary practices. In summary, this thesis has demonstrated that the impact of recreational fishing for particular species is significant and needs to be taken into account for more effective management and stock assessment purposes. It has also highlighted several management issues that should be addressed in order to promote more adequate regulations in the future and prevent noncompliance issues. A periodic monitoring of the recreational fishing activity including all fishing modes (i.e. spear fishing, boat, and shore angling) would also be beneficial to ensure a timely knowledge on the global recreational fishing activity and support future management actions.

Forças em estruturas de acostagem descontínuas em zonas desabrigadas: avaliação de ferramentas de cálculo existentes

Dissertação para obtenção do grau de Mestre em Engenharia Civil na Área de especialização em Hidráulica

Monitoring the marine environment adjacent to a petroleum refinery on Corio Bay, Victoria, Australia /Peter James Gilbert

The objective of the work reported in this thesis was to design and implement an ecological effects environmental monitoring program which would: 1) Collect baseline biological information on sessile epibiotic fouling communities from an area adjacent to a petroleum refinery located on Corio Bay, Victoria, to allow comparison with results of future monitoring for the assessment of long term temporal water quality trends. 2) Detect and — if possible - estimate the magnitude of any influence on epibiotic fouling communities within the Corio Bay marine ecosystem attributable to operations at the Shell Petroleum Refinery. 3) Investigate the extent of thermal stratification and rate of dispersal of the petroleum refinery main cooling-water outfall plume (discharging up to 350,000 tonnes of warmed seawater per day), and its effect on epibiotic communities within the EPA-defined mixing zone. A major component of the work undertaken was the design and development of artificial-substrate biological sampling stations suitable for use under the conditions prevailing in Corio Bay, and the development of appropriate quantitative underwater photographic sampling techniques to fulfil the experimental criteria outlined above. Experimental and other constraints imposed on the design of the stations precluded the simple suspension of frames from jetties or pylons, a technique widely used in previous work of this type. Artificial substrate panels were deployed along three radial transects centred within and extending beyond the petroleum refinery main cooling-water mixing zone. Identical substrate panels were deployed at a number of control sites located throughout Corio Bay, each chosen for differences in their degree of exposure to such factors as water movement, depth, shipping traffic and/or comparable industrial activity. The rate of colonisation (space utilisation) and the development of epibiotic fouling communities on artificial substrate panels was monitored over two twelve-month sampling periods using quantitative underwater photographic sampling techniques. Sampling was conducted at 4-8 week intervals with the rate of panel colonisation and community structure determined via coverage measurements. Various species of marine algae, polychaete tubeworms, hydroids, barnacles, simple and colonial ascidians, sponges, bivalve molluscs and encrusting bryozoans were all detected growing on panels. Communities which established on panels within the cooling-water mixing-zone and those at control sites were compared using statistical procedures including agglomerative hierarchical cluster analysis. A photographic sample archive has been established to allow comparison with similar future studies.

Monitoring corrosion of reinforced concrete beams in a chloride containing environment under different loading levels

Corrosion has significant adverse effects on the durability of reinforced concrete (RC) structures, especially those exposed to a marine environment and subjected to mechanical stress, such as bridges, jetties, piers and wharfs. Previous studies have been carried out to investigate the corrosion behaviour of steel rebar in various concrete structures, however, few studies have focused on the corrosion monitoring of RC structures that are subjected to both mechanical stress and environmental effects. This paper presents an exploratory study on the development of corrosion monitoring and detection techniques for RC structures under the combined effects of external loadings and corrosive media. Four RC beams were tested in 3% NaCl solutions under different levels of point loads. Corrosion processes occurring on steel bars under different loads and under alternative wetting - drying cycle conditions were monitored. Electrochemical and microscopic methods were utilised to measure corrosion potentials of steel bars; to monitor galvanic currents flowing between different steel bars in each beam; and to observe corrosion patterns, respectively. The results indicated that steel corrosion in RC beams was affected by local stress. The point load caused the increase of galvanic currents, corrosion rates and corrosion areas. Pitting corrosion was found to be the main form of corrosion on the surface of the steel bars for most of the beams, probably due to the local concentration of chloride ions. In addition, visual observation of the samples confirmed that the localities of corrosion were related to the locations of steel bars in beams. It was also demonstrated that electrochemical devices are useful for the detection of RC beam corrosion.

Stability of rubble-mound breakwater Lahaina Harbor, Hawaii : hydraulic model investigation /

Cover title.