Metastable States and Irregular Behaviour in a Josephson Junction with Nonlinear Resistance

We consider a resistively shunted Josephson junction with a resistance that depends inversely on voltage. It is shown that such a junction in the underdamped case can give rise to extremely long-lived metastable states even in the absence of external noise. We investigate numerically this metastable state and its transition to a chaotic state. The junction voltages corresponding to these states are studied.

Frustrated limit cycle and irregular behaviour in a nonlinear pendulum

We discuss how the presence of frustration brings about irregular behaviour in a pendulum with nonlinear dissipation. Here frustration arises owing to particular choice of the dissipation. A preliminary numerical analysis is presented which indicates the transition to chaos at low frequencies of the driving force.

Analysis of irregular behaviour on an optical computing logic cell

A new methodology to study irregular behaviours in logic cells is reported. It is based on two types of diagrams, namely phase and working diagrams. Sets of four bits are grouped and represented by their hexadecimal equivalent. Some hexadecimal numbers correspond to certain logic functions. The influence of the internal and external tolerances, namely those appearing in the employed devices and in the working signals, may be analysed with this method. Its importance in the case of logic structures with chaotic behaviours is studied.

Influencia de la maquinaria agrícola sobre la variabilidad espacial de la compactación del suelo. Aplicación de la metodología geoestadística-fractal

El cultivo de la caña de azúcar es uno de los más importantes en muchos países del mundo. Los suelos dedicados a este cultivo son usualmente compactados por el tránsito de la maquinaria en el proceso de cosecha. El uso combinado de la geoestadística con el análisis fractal ha demostrado ser útil para el estudio de los mismos. El objetivo del trabajo fue determinar los cambios espaciales de la resistencia a la penetración del suelo debido a la influencia del tránsito de la maquinaria en el proceso de cosecha de la caña de azúcar en un Vertisol, aplicando la metodología geoestadística-fractal. La investigación se llevó a cabo en el período de cosecha 2008-2009. Se evaluó la resistencia a la penetración en dos momentos, antes y después de la cosecha. El muestreo se realizó sistemáticamente en cuadrícula y en transecto, seleccionando 144 y 100 observaciones antes y después de la cosecha, respectivamente, y 221 para el transecto en diagonal. También se determinó el contenido de humedad del suelo por el método gravimétrico, para lo que se tomaron 288 muestras aleatorias en todo el campo. Los resultados demuestran que los valores de resistencia a la penetración (RP) presentaron una distribución normal a partir de los 5 cm de profundidad, el tránsito de la maquinaria agrícola para la cosecha de la caña de azúcar provocó concentración de la variabilidad espacial a escalas inferiores a la del muestreo (el efecto pepita aumentó), un aumento del rango de correlación espacial y una redistribución de las zonas de compactación (las variaciones de los mapas de Krigeaje). También indujo anti-persistencia y anisotropía en algunas direcciones horizontales. Se observó un comportamiento irregular de (RP) verticalmente en el transecto, donde no solamente influyó la maquinaria, sino que también otros factores influyeron como: la hilera, borde de la hilera y grietas. ABSTRACT The cultivation of the cane of sugar is one of the most important in many countries of the world. The soils dedicated to this cultivation are usually compacted by the traffic of the machinery in the harvest process. The combined use of the geostatistics with the fractal analysis has demonstrated to be useful for the study of the same ones. The objective of the work was to determine the space changes from the resistance to the penetration of the floor due to the influence of the traffic of the machinery in the harvest process of harvest of the cane of sugar in a Vertisol applying the geostatistic-fractal methodology. The investigation was carried out in the period of harvest 2008-2009. The resistance to the penetration at two moments was evaluated, before and after the harvest. The sampling was realized systematically in grid and transect, selecting 144 and 100 observations before and after the harvest, respectively, and 221 for transect in diagonal. Also the soil moisture content of the ground by the gravimetric method was determined, so 288 random samples in the entire field were taken. The results shown that resistance to penetration values presented a normal distribution deeper than 5 cm before and after harvest. The transit of the agricultural machinery for sugar cane harvest concentrated the space variability at lower distances than the sampling one, reflected an increase in the nugget effect. At the same time, an increase space correlation rank and a redistribution of compaction areas were observed studying the variations in kriging maps. Another effect of the agricultural machinery transit was to induce antipersistence and anisotropy in some horizontal directions. However, in vertical direction of the longest transect an irregular behaviour was induced not only by the machinery as by another factors such as soil cracks, crop rows and allocation.

Prediction of fluidization behaviour and a quasi-stationary approach to drying kinetics of irregular particulate food materials

Changes in fluidization behaviour behaviour was characterised for parallelepiped particles with three aspect ratios, 1:1, 2:1 and 3:1 and spherical particles. All drying experiments were conducted at 500C and 15 % RH using a heat pump dehumidifier system. Fluidization experiments were undertaken for the bed heights of 100, 80, 60 and 40 mm and at 10 moisture content levels. Due to irregularities in shape minimum fluidisation velocity of parallelepiped particulates (potato) could not fitted to any empirical model. Also a generalized equation was used to predict minimum fluidization velocity. The modified quasi-stationary method (MQSM) has been proposed to describe drying kinetics of parallelepiped particulates at 30o C, 40o C and 50o C that dry mostly in the falling rate period in a batch type fluid bed dryer.

Mechanical behaviour of irregular fibre materials

This work investigates the effect of fibre irregularities on the mechanical behaviour of the irregular fibres using the finite element method (FEM). The first part of this work examines that the effect of fibre dimensional irregularities on the linear and non-linear tensile behaviour of the fibres, using a two-dimensional (2D) finite element models. In the linear simulation, a concept of method Young’s modulus is introduced. The method Young’s modulus, breaking load and breaking extension are affected by the magnitude and frequency of diameter variation in the fibre specimen. Fibre dimensional variation and the gauge length effect are also simulated. In the non-linear analysis, some additional information is obtained on changes in the yield and post-yield regions, which are clearly shown in the load-extension curves. Further investigation is focused on the flexural buckling behaviour of fibres with dimensional irregularities. A three-dimensional (3D) finite element model is used to simulate the buckling deformation of dimensionally irregular fibres, and the critical buckling load of the simulated fibre is calculated. Two parameters, the effective length and the average diameter within the effective length of an irregular fibre, are considered to be the key factors that influence the buckling behaviour of the fibre. An important aspect of this work is the calculation of the effective length of an irregular fibre specimen during buckling. This method has not been reported before. The third part of this work is on the combined tensile and torsional behaviour of fibres with dimensional irregularities, using a three-dimensional (3D) finite element model. Two types of fibres, polyester and wool, are simulated with sine waves of different level (magnitude) and frequency at different twist levels. For the polyester fibre, experiment verification of the simulation results has been carried out, and the results indicate the FE model is well acceptable for the simulation. The final part of this work examines the combined effect of dimensional and structural irregularities on the fibre tensile behaviour. Three-dimensional (3D) finite element models are used to simulate the cracks (transverse, longitudinal, combined transverse and longitudinal cracks) and cavities distributed in uniform fibres and fibres with 30% level of diameter variation, respectively. One of important conclusions is that under the simulated conditions, the dimensional irregularity of fibre influences the tensile behaviour of fibres more than the fibre structural irregularity. The fibre dimensional irregularity affects not only the values of the breaking load and breaking extension, but also the shape of load-extension curves. However, the fibre structural irregularity simulated in the study appears to have little effect on the shape of the load-extension curves. In addition, the effect of crack or cavity size, type and distribution on fibre tensile properties is also investigated.

Models of collective cell behaviour with crowding effects : comparing lattice-based and lattice-free approaches

Individual-based models describing the migration and proliferation of a population of cells frequently restrict the cells to a predefined lattice. An implicit assumption of this type of lattice based model is that a proliferative population will always eventually fill the lattice. Here we develop a new lattice-free individual-based model that incorporates cell-to-cell crowding effects. We also derive approximate mean-field descriptions for the lattice-free model in two special cases motivated by commonly used experimental setups. Lattice-free simulation results are compared to these mean-field descriptions and to a corresponding lattice-based model. Data from a proliferation experiment is used to estimate the parameters for the new model, including the cell proliferation rate, showing that the model fits the data well. An important aspect of the lattice-free model is that the confluent cell density is not predefined, as with lattice-based models, but an emergent model property. As a consequence of the more realistic, irregular configuration of cells in the lattice-free model, the population growth rate is much slower at high cell densities and the population cannot reach the same confluent density as an equivalent lattice-based model.

Corrosion behaviour of creep-resistant AE42 magnesium alloy-based hybrid composites developed for powertrain applications

The corrosion behaviour of AE42 magnesium alloy and its composites reinforced with Saffil short fibres and SiC particles in various combinations was investigated. The corrosion rate of the unreinforced alloy was the lowest. The composite reinforced with Saffil short fibre alone exhibited slightly lower corrosion rate than the hybrid composites containing both Saffil short fibres and SiC particles. However, there was no specific trend observed in the corrosion rate of the hybrid composites with respect to the SiC particle content. The degradation of corrosion resistance of the composites was mainly attributed to the irregular and loose surface films.

Análise dinâmica e verificação à fadiga de obras de arte rodoviárias mistas (aço-concreto) submetidas ao tráfego de veículos sobre o pavimento irregular.

As pontes rodoviárias metálicas e mistas (aço-concreto) são submetidas a um grande número de carregamentos repetitivos de diferentes magnitudes, ao longo do tempo. Estas ações dinâmicas podem causar a nucleação de fraturas ou mesmo a propagação destas sobre o sistema estrutural. A depender da magnitude, estes efeitos podem comprometer o sistema estrutural e a sua confiabilidade, além de reduzir a vida útil das pontes. Assim sendo, neste trabalho de pesquisa foi investigada a resposta dinâmica de uma ponte mista (aço-concreto), simplesmente apoiada, com vão de 40,0 m, submetida ao tráfego de veículos sobre a superfície irregular do pavimento. Para tal um modelo numérico representativo do sistema estrutural foi desenvolvido com base no emprego do programa ANSYS, por meio do uso de técnicas usuais de discretização, via método dos elementos finitos. Um estudo paramétrico foi desenvolvido para identificar, de forma qualitativa e quantitativa, o efeito das irregularidades do pavimento sobre o comportamento dinâmico da ponte mista investigada. Em seguida, a verificação do projeto à fadiga do sistema misto foi realizada, com base no emprego do algoritmo de contagem de ciclos Rainflow e em curvas S-N associadas às principais normas de projeto sobre o tema. As conclusões deste trabalho de pesquisa alertam aos engenheiros estruturais para a possibilidade concreta acerca do aumento do dano por fadiga, relacionado às ações dinâmicas de veículos trafegando sobre o tabuleiro de pontes em aço e mistas (aço-concreto).

Effect of aureomycin on the behaviour of certain free amino acids in oil sardine (Sardinella longiceps) held in ice storage

The course of development of a few free amino acids under the influence of aureomycin in oil sardine (Sardinella lingiceps) held in ice storage was investigated. The levels of leucines and valine regularly increased in the control and aureomycin treated fush throughout the storage period. Alanines and threonine showed similar trend in both control and fish treated with 20ppm aureomycin. These amino acids however showed a gradual fall in fish treated at 5 ppm level. The changes in tyrosine+tryptophane were found to be irregular. Most of the amino acids studied indicated a remarkable change in trend by about the 16th day of ice storage in the case of fish treated with 50ppm aureimycin.

Short interfering RNA-mediated knockdown of drosha and pasha in undifferentiated Meloidogyne incognita eggs leads to irregular growth and embryonic lethality

Micro-(mi)RNAs play a pivotal role in the developmental regulation of plants and animals. We reasoned that disruption of normal heterochronic activity in differentiating Meloidogyne incognita eggs may lead to irregular development, lethality and by extension, represent a novel target for parasite control On silencing the nuclear RNase III enzyme drosha, a critical effector of miRNA maturation in animals, we found a significant inhibition of normal development and hatching in short interfering (sORNA-soaked M incognita eggs Developing juveniles presented with highly irregular tissue patterning within the egg, and we found that unlike our previous gene silencing efforts focused on FMRFamide (Phe-Met-Arg-Phe-NH2)-like peptides (FLPs), there was no observable phenotypic recovery following removal of the environmental siRNA. Aberrant phenotypes were exacerbated over time, and drosha knockdown proved embryonically lethal Subsequently, we identified and silenced the drosha cofactor pasha, revealing a comparable inhibition of normal embryonic development within the eggs to that of drosha-silenced eggs, eventually leading to embryonic lethality To further probe the link between normal embryonic development and the M. incognita RNA interference (RNAi) pathway, we attempted to examine the impact of silencing the cytosolic RNase III enzyme dicer. Unexpectedly, we found a substantial up-regulation of dicer transcript abundance, which did not impact on egg differentiation or hatching rates. Silencing of the individual transcripts in hatched J2s was significantly less successful and resulted in temporary phenotypic aberration of the J2s. which recovered within 24 h to normal movement and posture on washing out the siRNA. Soaking the J2s in dicer siRNA resulted in a modest decrease in dicer transcript abundance which had no observable impact on phenotype or behaviour within 48 h of initial exposure to siRNA. We propose that drosha, pasha and their ancillary factors may represent excellent targets for novel nematicides and/or in planta controls aimed at M incognita, and potentially other parasitic nematodes, through disruption of miRNA-directed developmental pathways. In addition, we have identified a putative Mi-en-I transcript which encodes an RNAi-inhibiting siRNA exonuclease We observe a marked up-regulation of MI-en-I transcript abundance in response to exogenously introduced siRNA, and reason that this may impact on the interpretation of RN/NI-based reverse genetic screens in plant parasitic nematodes. (C) 2010 Australian Society for Parasitology Inc. Published by Elsevier Ltd. All rights reserved.

An experimental and numerical investigation into the seismic performance of a multi-storey concentrically braced plan irregular structure

In this investigation, the seismic torsional response of a multi-storey concentrically braced frame (CBF) plan irregular structure is evaluated numerically and experimentally through a series of hybrid tests. CBF structures have become popular in seismic design because they are one of the most efficient types of steel structures to resist earthquake loading. However, their response under plan irregular conditions has received little focus mostly in part
due to their complex behaviour under seismic loading conditions. The majority of research on the seismic response of plan irregular structures is based purely on numerical investigations. This paper provides much needed experimental investigation of the seismic response of a CBF plan irregular structure with the aim of characterising the response of this class of structure. The effectiveness of the Eurocode 8 torsional effects provision as a method of designing for
low levels of mass eccentricity is evaluated. Results indicate that some of the observations made by purely numerical models are valid in that; torsionally stiff structures perform well and the stiff side of the structure is subjected to a greater ductility demand compared to the flexible side of the structure. The Eurocode 8 torsional effects provision is shown to be adequate in terms of ductility and interstorey drift however the structure performs poorly
in terms of floor rotation. Importantly, stiffness eccentricity occurs when the provision is applied to the structure when no mass eccentricity exists and results in a significant increase in floor rotations.

Irregular working times and metabolic disorders among truck drivers: a review

A number of studies to better understand the complex physiological mechanism involved in regulating body weight have been conducted. More specifically, the hormones related to appetite, leptin and ghrelin, and their association to obesity have been a focus of investigation. Circadian patterns of these hormones are a new target of research. The behaviour of these hormones in individuals subject to atypical working times such as shiftwork remains unclear. Shiftwork is characterized by changes in biological rhythms and cumulative circadian phase changes, being associated with high rates of obesity and metabolic syndrome. Truck drivers, who work irregular shifts, frequently present a high prevalence of obesity, which might be associated with work-related factors and/or lifestyle. In this context, the aim of this paper was to discuss the relationship of body mass index, appetite-related hormones and sleep characteristics in truck drivers who work irregular shifts compared with day workers.

Factorization method and irregular inclusions in electrical impedance tomography

In electrical impedance tomography, one tries to recover the conductivity inside a physical body from boundary measurements of current and voltage. In many practically important situations, the investigated object has known background conductivity but it is contaminated by inhomogeneities. The factorization method of Andreas Kirsch provides a tool for locating such inclusions. Earlier, it has been shown that under suitable regularity conditions positive (or negative) inhomogeneities can be characterized by the factorization technique if the conductivity or one of its higher normal derivatives jumps on the boundaries of the inclusions. In this work, we use a monotonicity argument to generalize these results: We show that the factorization method provides a characterization of an open inclusion (modulo its boundary) if each point inside the inhomogeneity has an open neighbourhood where the perturbation of the conductivity is strictly positive (or negative) definite. In particular, we do not assume any regularity of the inclusion boundary or set any conditions on the behaviour of the perturbed conductivity at the inclusion boundary. Our theoretical findings are verified by two-dimensional numerical experiments.