Iron Mountain Route Railway schedule: the great through line St. Louis, Arkansas and Texas to the Hot Springs of Arkansas

Iron Mountain Route Railway schedule: the great through line St. Louis, Arkansas and Texas to the Hot Springs of Arkansas.

Negative pH, efflorescent mineralogy, and consequences for environmental restoration at the Iron Mountain Superfund site, California

The Richmond Mine of the Iron Mountain copper deposit contains some of the most acid mine waters ever reported. Values of pH have been measured as low as −3.6, combined metal concentrations as high as 200 g/liter, and sulfate concentrations as high as 760 g/liter. Copious quantities of soluble metal sulfate salts such as melanterite, chalcanthite, coquimbite, rhomboclase, voltaite, copiapite, and halotrichite have been identified, and some of these are forming from negative-pH mine waters. Geochemical calculations show that, under a mine-plugging remediation scenario, these salts would dissolve and the resultant 600,000-m3 mine pool would have a pH of 1 or less and contain several grams of dissolved metals per liter, much like the current portal effluent water. In the absence of plugging or other at-source control, current weathering rates indicate that the portal effluent will continue for approximately 3,000 years. Other remedial actions have greatly reduced metal loads into downstream drainages and the Sacramento River, primarily by capturing the major acidic discharges and routing them to a lime neutralization plant. Incorporation of geochemical modeling and mineralogical expertise into the decision-making process for remediation can save time, save money, and reduce the likelihood of deleterious consequences.

Company E., Iron Mountain Volunteers in the Spanish-American War

verso: taken 1898 at Central House, old hotel in Iron Mountain, meeting place for mining men, etc.

Quinnesec, Michigan, large mining town southeast of Iron Mountain

description accompanying photograph: picture shows Quinnesec Falls and hydraulic power works

Geology of the massive sulfide deposits at Iron Mountain, Shasta County, California,

Mode of access: Internet.

Biogeographische Beziehungen zwischen den Alpen, dem Kaukasus und den asiatischen Hochgebirgen

Hintergrund: Biogeographische Verbindungen der Alpen nach Asien wurden schon im 19. Jahrhundert durch floristische Vergleiche entdeckt. Ziele: In den vorliegenden drei Artikeln wird untersucht, ob diese Verbindung entlang einer nördlichen, arktisch-borealen Route oder entlang einer südlichen Route über dazwischen liegende Gebirge wie den Kaukasus bestand. Methoden: Molekulare Phylogenien von Epimedium (Berberidaceae) und der Tribus der Hyoscyameae (Solanaceae), deren Vertreter disjunkt in den Alpen, dem Kaukasus und in asiatischen Gebirgen vorkommen, wurden mit nukleären und plastidären Markern erstellt und bio¬geographisch ausgewertet. Zur Datierung der Diversifizierungsereignisse und Arealbil¬dung diente eine molekulare Uhr. Ein aktueller floristischer Vergleich von Gattungen, die in den Alpen, den asiatischen Gebirgen und in Gebieten entlang der potentiellen Routen vor¬kom¬men, wurde unternommen und ausgewertet. Daran anschließend wurde nach molekular-phylogenetischer Literatur für interessante Gruppen aus diesem Ver¬gleich recherchiert, um diese biogeogra¬phisch bezüglich der Fragestellung zu interpretieren. Ergebnisse: Von 429 Gattungen, die in den Alpen und im Himalaya vorkommen, wachsen 218 entlang der nördlichen und der südlichen Route. 203 kommen nur entlang der süd¬lichen und drei nur entlang der nördlichen Route vor. Fünf kommen nur in den Alpen und im Himalaya vor. Epimedium, Scopolia/Physochlaina aus den Hyoscyameae und Primula sect. Auricula sind Beispiele für eine nördliche biogeographische Verbindung zwischen den Alpen und Asien. Diese bestand zumindest in den ersten beiden Fällen wahrscheinlich aus einem durchgängigen Laubwaldgürtel, der durch das abkühlende und trockener werdende Klima im Pliozän und Pleistozän fragmentiert wurde und heute nicht mehr besteht. Es handelt sich also um ein Vikarianzmuster und weniger um eine Migrationsroute. Die größere Diver¬sität dieser Guppen, die in Asien beobachtet werden kann ist sekundär entstanden. Atropa aus den Hyoscyameae, Brachypodium, die Subtribus Loliinae aus den Poaceae, Bupleurum und Doronicum sind Beispiele für eine südliche Verbindung. Hier liegen die Diversitätszentren im Mediterraneum und die Vorkommen im Osten sind abgeleitet. Schlussfolgerungen: Die Datengrundlage aus der Literaturrecherche ist nicht sehr breit und die meisten Phylogenien waren für die Fragestellung nicht aussagekräftig. Die histori¬schen Erkenntnisse und die Ideen über den Zusammenhang der Alpenflora mit der asiatischer Gebirge werden grundsätzlich bestärkt. Die Flora der Alpen enthält ein Element das über eine nördliche Verbindung noch lange mit asiatischen Gebirgen in Kontakt stand und ein südliches Element, das aus dem Mittelmeer¬raum bzw. aus SW Asien stammt. Die Beispiele für eine nördliche Verbindung sprechen allerdings nicht für eine Migration von Asien nach Europa sondern zeigen ein Vikarianzmuster auf.

Winchester Hotel, before 1892

verso: (Third from right on balcony: Carrie Ducharme, later Mrs. John A. Cochran, mother of W. D. Cohran. Iron Mountain

The Gandarela Mountain Range and the “resistance space” against iron ore mining threat: a focus on the contrapositions

Full Text / Article complet

Visual route recognition with a handful of bits

In this paper we use a sequence-based visual localization algorithm to reveal surprising answers to the question, how much visual information is actually needed to conduct effective navigation? The algorithm actively searches for the best local image matches within a sliding window of short route segments or 'sub-routes', and matches sub-routes by searching for coherent sequences of local image matches. In contract to many existing techniques, the technique requires no pre-training or camera parameter calibration. We compare the algorithm's performance to the state-of-the-art FAB-MAP 2.0 algorithm on a 70 km benchmark dataset. Performance matches or exceeds the state of the art feature-based localization technique using images as small as 4 pixels, fields of view reduced by a factor of 250, and pixel bit depths reduced to 2 bits. We present further results demonstrating the system localizing in an office environment with near 100% precision using two 7 bit Lego light sensors, as well as using 16 and 32 pixel images from a motorbike race and a mountain rally car stage. By demonstrating how little image information is required to achieve localization along a route, we hope to stimulate future 'low fidelity' approaches to visual navigation that complement probabilistic feature-based techniques.

A novel route in bone tissue engineering : magnetic biomimetic scaffolds

In recent years, interest in tissue engineering and its solutions has increased considerably. In particular, scaffolds have become fundamental tools in bone graft substitution and are used in combination with a variety of bio-agents. However, a long-standing problem in the use of these conventional scaffolds lies in the impossibility of re-loading the scaffold with the bio-agents after implantation. This work introduces the magnetic scaffold as a conceptually new solution. The magnetic scaffold is able, via magnetic driving, to attract and take up in vivo growth factors, stem cells or other bio-agents bound to magnetic particles. The authors succeeded in developing a simple and inexpensive technique able to transform standard commercial scaffolds made of hydroxyapatite and collagen in magnetic scaffolds. This innovative process involves dip-coating of the scaffolds in aqueous ferrofluids containing iron oxide nanoparticles coated with various biopolymers. After dip-coating, the nanoparticles are integrated into the structure of the scaffolds, providing the latter with magnetization values as high as 15 emu g�1 at 10 kOe. These values are suitable for generating magnetic gradients, enabling magnetic guiding in the vicinity and inside the scaffold. The magnetic scaffolds do not suffer from any structural damage during the process, maintaining their specific porosity and shape. Moreover, they do not release magnetic particles under a constant flow of simulated body fluids over a period of 8 days. Finally, preliminary studies indicate the ability of the magnetic scaffolds to support adhesion and proliferation of human bone marrow stem cells in vitro. Hence, this new type of scaffold is a valuable candidate for tissue engineering applications, featuring a novel magnetic guiding option.

A new layered iron fluorophosphate

A new iron fluorophosphate of the composition, [C6N4H21] [Fe2F2(HPO4)(3)][H2PO4](.)2H(2)O, I has been prepared by the hydrothermal route. This compound contains iron fluorophosphate layers and the H2PO4- anions are present in the interlayer space along with the protonated amine and water molecules. The compound crystallizes in the monoclinic space group P2(1)/c. (a = 13-4422(10) Angstrom, b = 9 7320(10) Angstrom, c = 18-3123(3) Angstrom, beta = 92-1480degrees, V = 2393-92(5) Angstrom 3, Z = 4, M = 719-92, d(calc). = 1.997 g cm(-3), R-1 = 0.03 and wR(2) = 0,09).

Facile green fabrication of iron-doped cubic ZrO2 nanoparticles by Phyllanthus acidus: Structural, photocatalytic and photoluminescent properties

Cubic ZrO2: Fe3+ (0.5-4 mol%) nanoparticles (NPs) were synthesized via bin-inspired, inexpensive and simple route using Phyllanthus acidus as fuel. PXRD, SEM, TEM, FTIR, UV absorption and PL studies were performed to ascertain the formation of NPs. Rietveld analysis confirmed the formation of cubic structure. The influence of Fe3+ on the structure, morphology, UV absorption, PL emission and photocatalytic activity of NPs were investigated. The CIE chromaticity coordinates (0.36, 0.41) show that NPs could be a promising candidate for white LEDs. The influence of Fe3+ on ZrO2 matrix for photocatalytic degradation of AO7 was evaluated under UVA and Sunlight irradiation. The enhanced photocatalytic activity of spherical shaped ZrO2: Fe3+ (2 mol%) under UVA light was attributed to dopant concentration, crystallite size, narrow band gap, textural properties and capability for reducing the electron-hole pair recombination. The trend of inhibitory effect in the presence of different radical scavengers were followed the order SO42- > Cl- > C2H5OH > HCO3- > CO32-. The recycling catalytic ability of the ZrO2: Fe3+ (2 mol%) was also evaluated with a negligible decrease in the degradation efficiency even after the sixth successive run. (C) 2014 Elsevier B.V. All rights reserved.

Single-step synthesis of carbon nanotubes/iron/iron oxide composite films through inert-ambient CVD using ferric acetylacetonate as a precursor

We have developed a unique single-step chemical vapor deposition (CVD) route for the synthesis of composite thin films containing carbon nanotubes (CNTs). CVD was carried out in an inert ambient using only iron(III) acetylacetonate as the precursor. Depositions were conducted at 700 degrees C on stainless steel substrates in argon ambient in the absence of any reactive gases (such as oxygen, hydrogen). By changing the deposition parameters, especially the pressure in the CVD reactor, the form of carbon deposited could be changed from amorphous to carbon nanotubes, the latter resulting in Fe-Fe3O4-CNT films. X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and electron microscopy together confirm the formation of the three-component composite and illustrate the nanoscale mixing of the components. Elemental iron formed in this process was protected from oxidation by the co-deposited carbon surrounding it. Irrespective of the substrate used, a composite coating with CNTs was formed under optimum conditions, as verified by analyses of the film formed on polycrystalline alumina and silicon substrates.

Effect of the A cation size disorder and synthesis conditions on the properties of an iron perovskite series

Póster presentado en The Energy and Materials Research Conference - EMR2015 celebrado en Madrid (España) entre el 25-27 de febrero de 2015