999 resultados para Intraspecific comparison
Resumo:
Townsend’s big-eared bat, Corynorhinus townsendii, is distributed broadly across western North America and in two isolated, endangered populations in central and eastern United States. There are five subspecies of C. townsendii; C. t. pallescens, C. t. australis, C. t. townsendii, C. t. ingens, and C. t. virginianus with varying degrees of concern over the conservation status of each. The aim of this study was to use mitochondrial and microsatellite DNA data to examine genetic diversity, population differentiation, and dispersal of three C. townsendii subspecies. C. t. virginianus is found in isolated populations in the eastern United States and was listed as endangered under the Endangered Species Act in 1979. Concern also exists about declining populations of two western subspecies, C. t. pallescens and C. t. townsendii. Using a comparative approach, estimates of the genetic diversity within populations of the endangered subspecies, C. t. virginianus, were found to be significantly lower than within populations of the two western subspecies. Further, both classes of molecular markers revealed significant differentiation among regional populations of C. t. virginianus with most genetic diversity distributed among populations. Genetic diversity was not significantly different between C. t. townsendii and C. t. pallescens. Some populations of C. t. townsendii are not genetically differentiated from populations of C. t. pallescens in areas of sympatry. For the western subspecies gene flow appears to occur primarily through male dispersal. Finally, geographic regions representing significantly differentiated and genetically unique populations of C. townsendii virginianus are recognized as distinct evolutionary significant units.
Resumo:
A espécie Sotalia guianensis apresenta um variado repertório de assobios que estão ligados a interação social e a diferentes contextos de comportamento. As variações intraespecíficas nas estruturas dos assobios podem indicar diferenças entre populações dessa espécie. O presente estudo caracterizou e comparou o repertório dos assobios de Sotalia guianensis, em três baías do estado do Rio de Janeiro: Baía de Guanabara (BG), Baía de Sepetiba (BS) e Baía da Ilha Grande (BI), utilizando um sistema de gravação com limite superior de frequência de 48 kHz e através da aplicação das análises quantitativas e qualitativas dos parâmetros acústicos. As gravações dos assobios foram realizadas com embarcações de 5,5 e 7m e sistema de gravação composto por um hidrofone High Tech, modelo HTI-96-MIN, e um gravador digital modelo PMD 671 Marantz, com limite superior de frequência de 48 kHz. As análises dos espectrogramas foram realizadas com os softwares Adobe Audition 1.5 e Raven 1.3. Os assobios foram classificados em seis categorias de forma de contorno e 11 parâmetros acústicos foram medidos para cada assobio. Para comparar os parâmetros acústicos de mesma forma de contorno entre as três baías, foram aplicados a análise descritiva e testes estatísticos de comparação de média. Um total de 1800 assobios foi selecionado e 61,38% (N=1105) dos assobios apresentaram forma de contorno ascendente. Assobios com zero ou um ponto de inflexão foram mais frequentes (N=1476), correspondendo a 82%. A amplitude de frequência encontrada variou de 1,03 a 46,87 kHz, maior alcance registrado para essa espécie no Brasil. A média de duração dos assobios da BG foi menor do que as médias encontradas na BS e na BI. Os resultados de todas as comparações realizadas demonstraram que os parâmetros de frequência (FI, FF, FMAX e F3/4) foram os que mais apresentaram diferenças significativas entre as três áreas. A variação encontrada nos assobios de S. guianensis entre as três áreas estudadas pode também estar ligada aos tipos de assobios mais comuns em cada área, representados pelos assobios ascendentes, que apesar de apresentarem a mesma forma de contorno, possuem diferenças em seus parâmetros acústicos, possivelmente ligados a informações individuais. A utilização de um sistema de gravação com limite superior de 48 kHz possibilitou a análise de muitos assobios. Com isso, foi possível verificar a importância do limite de frequência aplicado para caracterizar o repertório acústico dessa espécie, juntamente com as análises qualitativas das formas de contorno e as análises quantitativas dos parâmetros acústicos dos assobios. A aplicação dessa metodologia foi eficaz na comparação intraespecífica dos assobios, e futuramente, estudos mais detalhados da classificação dos assobios, poderá acrescentar informações relevantes sobre a variação desse tipo de emissão sonora no repertório acústico S. guianensis
Resumo:
Population genetic studies of freshwater invertebrate taxa in New Zealand and South America are currently few despite the geologically and climatically dynamic histories of these regions. The focus of our study was a comparison of the influence on realized dispersal of 2 closely related nonbiting midges (Chironomidae) of population fragmentation on these separated austral land masses. We used a 734-base pair (bp) fragment of cytochrome c oxidase subunit I (COI) to investigate intraspecific genetic structure in Naonella forsythi Boothroyd in New Zealand and Ferringtonia patagonica Edwards in Patagonia. We proposed hypotheses about their potential dispersal and, hence, expected patterns of genetic structure in these 2 species based on published patterns for the closely related Australian taxon Echinocladius martini Cranston. Genetic structure revealed for both N. forsythi and F. patagonica was characterized by several highly divergent (2.0–10.5%) lineages of late Miocene–Pliocene age within each taxon that were not geographically localized. Many were distributed widely. This pattern differed greatly from population structure in E. martini, which was typified by much greater endemicity of divergent genetic lineages. Nevertheless, diversification of lineages in all 3 taxa appeared to be temporally congruent with the onset of late Miocene glaciations in the southern hemisphere that may have driven fragmentation of suitable habitat, promoting isolation of populations and divergence in allopatry. We argue that differences in realized dispersal post-isolation may be the result of differing availability of suitable habitat in interglacial periods.
Resumo:
Sweat bees exhibit a range of social behaviours, from solitary nesting, in which no workers are produced, to strong eusociality, in which workers exhibit a high degree of altruism, behaviour that is measured by the degree of personal reproductive sacrifice. Field studies were carried out for seven weeks during May-June 2000 in southern Greece in order to investigate intraspecific social variation, and test the hypothesis of a north-south cline of decreasing eusociality in the obligately eusocial sweat bee L. (E.) malachurum. A comparative study, using principal components analysis, was performed to determine if patterns of intraspecific social variation in L. malachurum reflect the patterns of social variation within the subgenus, Evylaeus, as a whole. The results of the field study reveal that, in Greece, two worker broods were produced followed by a third brood consisting of gynes, males and some workers, indicating that there was an overlap in worker and gyne production. There was strong caste distinction between queens and workers. Workers actively foraged and participated in nest construction as most workers (58%, n=303) had a high degree of mandibular wear. Workers did not participate in the oviposition of Brood 3 gynes since only 0.7% (n=278) of workers were mated. Furthermore, queen survival until the end of Brood 3 and a substantial size differential of 10.6% between queens and workers suggested that queen domination over worker behaviour during the early to mid-part of the colony cycle was plausible. Male production in Brood 3 by some workers was likely, since the timing of worker ovarian development corresponded with the timing of male production. These findings suggest that workers of the first two broods were primarily altruistic, but some (28%) Brood 1 (9%) and Brood 2 (19%) workers produced males, indicating that the degree of altruistic behaviour declined during the lifetime of the colony. In comparison with other L. malachurum populations in Europe, the Greek population of L. malachurum had a weaker social level as a result of the higher proportion of workers potentially involved in male production, thus 3 supporting the hypothesis of a southerly cline of decreasing eusociality. Furthermore, intraspecific variation in social level across Europe appears to be due to longer breeding seasons in more southerly locations that would promote the production of larger colonies and provide opportunities for workers to evade queen control. The comparative study using principal components analysis on 20 solitary (of the subgenera Evylaeus and Lasioglossum), eusocial and socially polymorphic Evylaeus species and populations reveals that six traits are closely associated with stronger eusociality in Evylaeus. These traits are: (1) a reduction in the proportion of males in the early brood(s); (2) a reduction in the proportion of females that mate; (3) an increase in the mean number of first brood workers; (4) a reduction in the proportion of females with developed ovaries; (5) an increase in size dimorphism between castes, and (6) nest guarding. These are traits that most significantly define principal component one and therefore distinguish social type as indicated by a clear separation of the eusocial and the solitary populations, with a socially polymorphic species falling in between. Furthermore, most of these traits are under foundress control and may suggest that the evolutionary loss or gain of eusociality is based on selection pressures on a founding female. Colony size and female ovarian development are common factors distinguishing social variation in L. malachurum and within the subgenus as a whole. The principal components analysis excluding the solitary species and the socially aberrant L. marginatum populations show the L. malachurum populations separated based on an increasing proportion of workers with developed ovaries as populations are found more south, lending further support to the hypothesis of a north-south cline of decreasing eusociality.
Resumo:
Rhizoctonia solani AG-1 IA causes leaf blight on soybean and rice. Despite the fact that R. solani AG-1 IA is a major pathogen affecting soybean and rice in Brazil and elsewhere in the world, little information is available on its genetic diversity and evolution. This study was an attempt to reveal the origin, and the patterns of movement and amplification of epidemiologically significant genotypes of R. solani AG-1 IA from soybean and rice in Brazil. For inferring intraspecific evolution of R. solani AG-1 IA sampled from soybean and rice, networks of ITS-5.8S rDNA sequencing haplotypes were built using the statistical parsimony algorithm from Clement et al. (2000) Molecular Ecology 9: 1657-1660. Higher haplotype diversity (Nei M 1987, Molecular Evolutionary Genetics Columbia University Press, New york: 512p.) was observed for the Brazilian soybean sample of R. solani AG-1 IA (0.827) in comparison with the rest of the world sample (0.431). Within the south-central American clade (3-2), four haplotypes of R. solani AG-1 IA from Mato Grosso, one from Tocantins, one from Maranhao, and one from Cuba occupied the tips of the network, indicating recent origin. The putative ancestral haplotypes had probably originated either from Mato Grosso or Maranhao States. While 16 distinct haplotypes were found in a sample of 32 soybean isolates of the pathogen, the entire rice sample (n=20) was represented by a single haplotype (haplotype 5), with a worldwide distribution. The results from nested-cladistic analysis indicated restricted gene flow with isolation by distance (or restricted dispersal by distance in nonsexual species) for the south-central American clade (3-2), mainly composed by soybean haplotypes.
Resumo:
In this article, we review intraspecific studies of basal metabolic rate (BMR) that address the correlation between diet quality and BMR. The food-habit hypothesis stands as one of the most striking and often-mentioned interspecific patterns to emerge from studies of endothermic energetics. Our main emphasis is the explicit empirical comparison of predictions derived from interspecific studies with data gathered from within-species studies in order to explore the mechanisms and functional significance of the putative adaptive responses encapsulated by the food-habit hypothesis. We suggest that, in addition to concentrating on the relationship among diet quality, internal morphology, and BMR, new studies should also attempt to unravel alternative mechanisms that shape the interaction between diet and BMR, such as enzymatic plasticity, and the use of energy-saving mechanisms, such as torpor. Another avenue for future study is the measurement of the effects of diet quality on other components of the energy budget, such as maximum thermogenic and sustainable metabolic rates. It is possible that the effects of diet quality operate on such components rather than directly on BMR, which might then push or pull along changes in these traits. Results from intraspecific studies suggest that the factors responsible for the association between diet and BMR at an ecological timescale might not be the same as those that promoted the evolution of this correlation. Further analyses should consider how much of a role the proximate and ultimate processes have played in the evolution of BMR.
Resumo:
In this present work attempts have been made to study the glass transition temperature of alternative mould materials by using both microwave heating and conventional oven heating. In this present work three epoxy resins, namely R2512, R2515 and R2516, which are commonly used for making injection moulds have been used in combination with two hardeners H2403 and H2409. The magnetron microwave generator used in this research is operating at a frequency of 2.45 GHz with a hollow rectangular waveguide. In order to distinguish the effects between the microwave and conventional heating, a number of experiments were performed to test their mechanical properties such as tensile and flexural strengths. Additionally, differential scanning calorimeter technique was implemented to measure the glass transition temperature on both microwave and conventional heating. This study provided necessary evidences to establish that microwave heated mould materials resulted with higher glass transition temperature than the conventional heating. Finally, attempts were also made to study the microstructure of microwave-cured materials by using a scanning electron microscope in order to analyze the morphology of cured specimens.
Comparison of Regime Switching, Probit and Logit Models in Dating and Forecasting US Business Cycles