Using the learning tools interoperability framework for LMS integration in service oriented architectures

The LMS plays an indisputable role in the majority of the eLearning environments. This eLearning system type is often used for presenting, solving and grading simple exercises. However, exercises from complex domains, such as computer programming, require heterogeneous systems such as evaluation engines, learning objects repositories and exercise resolution environments. The coordination of networks of such disparate systems is rather complex. This work presents a standard approach for the coordination of a network of eLearning systems supporting the resolution of exercises. The proposed approach use a pivot component embedded in the LMS with two roles: provide an exercise resolution environment and coordinate the communication between the LMS and other systems exposing their functions as web services. The integration of the pivot component with the LMS relies on the Learning Tools Interoperability. The validation of this approach is made through the integration of the component with LMSs from two vendors.

Improving integrated care in chronic kidney failure patients with a standard-based interoperability framework.

This paper introduces the evaluation report after fostering a Standard-based Interoperability Framework (SIF) between the Virgen del Rocío University Hospital (VRUH) Haemodialysis (HD) Unit and 5 outsourced HD centres in order to improve integrated care by automatically sharing patients' Electronic Health Record (EHR) and lab test reports. A pre-post study was conducted during fourteen months. The number of lab test reports of both emergency and routine nature regarding to 379 outpatients was computed before and after the integration of the SIF. Before fostering SIF, 19.38 lab tests per patient were shared between VRUH and HD centres, 5.52 of them were of emergency nature while 13.85 were routine. After integrating SIF, 17.98 lab tests per patient were shared, 3.82 of them were of emergency nature while 14.16 were routine. The inclusion of a SIF in the HD Integrated Care Process has led to an average reduction of 1.39 (p=0.775) lab test requests per patient, including a reduction of 1.70 (p=0.084) in those of emergency nature, whereas an increase of 0.31 (p=0.062) was observed in routine lab tests. Fostering this strategy has led to the reduction in emergency lab test requests, which implies a potential improvement of the integrated care.

EUROPEAN INTEROPERABILITY FRAMEWORK & E-CODEX: An Assessment of both European Initiatives towards Interoperability

Due to the necessity of achieving greater interoperability among the European Union (EU) Member States’ public services, the European Interoperability Framework (EIF) was created. This framework provides guidelines to projects towards cross-border interoperability of EU Member States. One of such projects is the e-CODEX. The purpose of this thesis is, therefore, to assess how useful the EIF is, how e-CODEX stands in compliance to the EIF and ultimately answer whether the e-CODEX should fulfill its intended purpose or not. To answer these questions, I divided the research in two distinct sections: the first one compares the EIF against the American initiative towards interoperability, the Federal Enterprise Architecture (FEA); and the second one assesses to what extent the e-CODEX follows the EIF and to what extent the EIF covers e-CODEX’s needs in the form of a questionnaire sent to experts in e-CODEX’s Member States. By the conclusion, I summarize the findings in each section, derive some new findings by combining the previous ones, and finally suggest some recommendations and a topic for future research.

Integration of a simulation platform for electrical mobility within the arrowhead interoperability framework

This dissertation document deals with the development of a project, over a span of more than two years, carried out within the scope of the Arrowhead Framework and which bears my personal contribution in several sections. The final part of the project took place during a visiting period at the university of Luleå. The Arrowhead Project is an European project, belonging to the ARTEMIS association, which aims to foster new technologies and unify the access to them into an unique framework. Such technologies include the Internet of Things phe- nomenon, Smart Houses, Electrical Mobility and renewable energy production. An application is considered compliant with such framework when it respects the Service Oriented Architecture paradigm and it is able to interact with a set of defined components called Arrowhead Core Services. My personal contribution to this project is given by the development of several user-friendly API, published in the project's main repository, and the integration of a legacy system within the Arrowhead Framework. The implementation of this legacy system was initiated by me in 2012 and, after many improvements carried out by several developers in UniBO, it has been again significantly modified this year in order to achieve compatibility. The system consists of a simulation of an urban scenario where a certain amount of electrical vehicles are traveling along their specified routes. The vehicles are con-suming their battery and, thus, need to recharge at the charging stations. The electrical vehicles need to use a reservation mechanism to be able to recharge and avoid waiting lines, due to the long recharge process. The integration with the above mentioned framework consists in the publication of the services that the system provides to the end users through the instantiation of several Arrowhead Service Producers, together with a demo Arrowhead- compliant client application able to consume such services.

A new MDA-SOA based framework for intercloud interoperability

Cloud computing has been one of the most important topics in Information Technology which aims to assure scalable and reliable on-demand services over the Internet. The expansion of the application scope of cloud services would require cooperation between clouds from different providers that have heterogeneous functionalities. This collaboration between different cloud vendors can provide better Quality of Services (QoS) at the lower price. However, current cloud systems have been developed without concerns of seamless cloud interconnection, and actually they do not support intercloud interoperability to enable collaboration between cloud service providers. Hence, the PhD work is motivated to address interoperability issue between cloud providers as a challenging research objective. This thesis proposes a new framework which supports inter-cloud interoperability in a heterogeneous computing resource cloud environment with the goal of dispatching the workload to the most effective clouds available at runtime. Analysing different methodologies that have been applied to resolve various problem scenarios related to interoperability lead us to exploit Model Driven Architecture (MDA) and Service Oriented Architecture (SOA) methods as appropriate approaches for our inter-cloud framework. Moreover, since distributing the operations in a cloud-based environment is a nondeterministic polynomial time (NP-complete) problem, a Genetic Algorithm (GA) based job scheduler proposed as a part of interoperability framework, offering workload migration with the best performance at the least cost. A new Agent Based Simulation (ABS) approach is proposed to model the inter-cloud environment with three types of agents: Cloud Subscriber agent, Cloud Provider agent, and Job agent. The ABS model is proposed to evaluate the proposed framework.

Embedded Service Bus for Internet of Things Interoperability

Internet of Things (IoT) technologies are developing rapidly, and therefore there exist several standards of interconnection protocols and platforms. The existence of heterogeneous protocols and platforms has become a critical challenge for IoT system developers. To mitigate this challenge, few alliances and organizations have taken the initiative to build a framework that helps to integrate application silos. Some of these frameworks focus only on a specific domain like home automation. However, the resource constraints in the large proportion of connected devices make it difficult to build an interoperable system using such frameworks. Therefore, a general purpose, lightweight interoperability framework that can be used for a range of devices is required. To tackle the heterogeneous nature, this work introduces an embedded, distributed and lightweight service bus, Lightweight IoT Service bus Architecture (LISA), which fits inside the network stack of a small real-time operating system for constrained nodes. LISA provides a uniform application programming interface for an IoT system on a range of devices with variable resource constraints. It hides platform and protocol variations underneath it, thus facilitating interoperability in IoT implementations. LISA is inspired by the Network on Terminal Architecture, a service centric open architecture by Nokia Research Center. Unlike many other interoperability frameworks, LISA is designed specifically for resource constrained nodes and it provides essential features of a service bus for easy service oriented architecture implementation. The presented architecture utilizes an intermediate computing layer, a Fog layer, between the small nodes and the cloud, thereby facilitating the federation of constrained nodes into subnetworks. As a result of a modular and distributed design, the part of LISA running in the Fog layer handles the heavy lifting to assist the lightweight portion of LISA inside the resource constrained nodes. Furthermore, LISA introduces a new networking paradigm, Node Centric Networking, to route messages across protocol boundaries to facilitate interoperability. This thesis presents a concept implementation of the architecture and creates a foundation for future extension towards a comprehensive interoperability framework for IoT.

Pragmatic oriented data interoperability for smart healthcare information systems

Smart healthcare is a complex domain for systems integration due to human and technical factors and heterogeneous data sources involved. As a part of smart city, it is such a complex area where clinical functions require smartness of multi-systems collaborations for effective communications among departments, and radiology is one of the areas highly relies on intelligent information integration and communication. Therefore, it faces many challenges regarding integration and its interoperability such as information collision, heterogeneous data sources, policy obstacles, and procedure mismanagement. The purpose of this study is to conduct an analysis of data, semantic, and pragmatic interoperability of systems integration in radiology department, and to develop a pragmatic interoperability framework for guiding the integration. We select an on-going project at a local hospital for undertaking our case study. The project is to achieve data sharing and interoperability among Radiology Information Systems (RIS), Electronic Patient Record (EPR), and Picture Archiving and Communication Systems (PACS). Qualitative data collection and analysis methods are used. The data sources consisted of documentation including publications and internal working papers, one year of non-participant observations and 37 interviews with radiologists, clinicians, directors of IT services, referring clinicians, radiographers, receptionists and secretary. We identified four primary phases of data analysis process for the case study: requirements and barriers identification, integration approach, interoperability measurements, and knowledge foundations. Each phase is discussed and supported by qualitative data. Through the analysis we also develop a pragmatic interoperability framework that summaries the empirical findings and proposes recommendations for guiding the integration in the radiology context.

Electronic Government Interoperability: Identifying the Barriers for Frameworks Adoption

Interoperability is a crucial issue for electronic government due to the need of agencies' information systems to be totally integrated and able to exchange data in a seamless way. A way to achieve it is by establishing a government interoperability framework (GIF). However, this is a difficult task to be carried out due not only to technological issues but also to other aspects. This research is expected to contribute to the identification of the barriers to the adoption of interoperability standards for electronic government. The article presents the preliminary findings from a case study of the Brazilian Government framework (e-PING), based on the analyses of documents and face-to-face interviews. It points out some aspects that may influence the establishment of these standards, becoming barriers to their adoption.

An ontology-based approach to define and manage B2B interoperability

Electronic business surely represents the new development perspective for world-wide trade. Together with the idea of ebusiness, and the exigency to exchange business messages between trading partners, the concept of business-to-business (B2B) integration arouse. B2B integration is becoming necessary to allow partners to communicate and exchange business documents, like catalogues, purchase orders, reports and invoices, overcoming architectural, applicative, and semantic differences, according to the business processes implemented by each enterprise. Business relationships can be very heterogeneous, and consequently there are variousways to integrate enterprises with each other. Moreover nowadays not only large enterprises, but also the small- and medium- enterprises are moving towards ebusiness: more than two-thirds of Small and Medium Enterprises (SMEs) use the Internet as a business tool. One of the business areas which is actively facing the interoperability problem is that related with the supply chain management. In order to really allow the SMEs to improve their business and to fully exploit ICT technologies in their business transactions, there are three main players that must be considered and joined: the new emerging ICT technologies, the scenario and the requirements of the enterprises and the world of standards and standardisation bodies. This thesis presents the definition and the development of an interoperability framework (and the bounded standardisation intiatives) to provide the Textile/Clothing sectorwith a shared set of business documents and protocols for electronic transactions. Considering also some limitations, the thesis proposes a ontology-based approach to improve the functionalities of the developed framework and, exploiting the technologies of the semantic web, to improve the standardisation life-cycle, intended as the development, dissemination and adoption of B2B protocols for specific business domain. The use of ontologies allows the semantic modellisation of knowledge domains, upon which it is possible to develop a set of components for a better management of B2B protocols, and to ease their comprehension and adoption for the target users.

Interoperability of Cross-Border European Egovernment Services: Some Design Issues

The authors analyse some of the research outcomes achieved during the implementation of the EC GUIDE research project “Creating an European Identity Management Architecture for eGovernment”, as well as their personal experience. The project goals and achievements are however considered in a broader context. The key role of Identity in the Information Society was emphasised, that the research and development in this field is in its initial phase. The scope of research related to Identity, including the one related to Identity Management and Interoperability of Identity Management Systems, is expected to be further extended. The authors analyse the abovementioned issues in the context established by the EC European Interoperability Framework (EIF) as a reference document on interoperability for the Interoperable Delivery of European eGovernment Services to Public Administrations, Business and Citizens (IDABC) Work Programme. This programme aims at supporting the pan-European delivery of electronic government services.

E-Business Intreoperability Frameworks for SMEs

Current e-business standards have been developed and used by large organizations to reduce clerical costs in business transactions by increased automation and higher level of business-to-business integration. Small and medium enterprises (SME's), however, cannot easily adopt these standards due to the SME's lacking the technical expertise and resources for implementing them. Still, large organizations increasingly require their business partners, most of which are SME's, to be able to interoperate by their chosen e-business standards. The research question for the study was, first, which of the existing e-business technologies are most SME-adoptable, and, second, how could those e-business technologies be made easier for SME's to implement. The study was conducted as a literature study that evaluated the available e-business frameworks and SME-oriented e-business architectures based on the implementation complexity and costs incurred for the SME adopter. The study found that only few e-business solutions are SMEadoptable. The technological approaches used in the solutions need to be improved on a number of areas, the most important of which is implementation complexity. The study revealed that this also applies to the special, SME-oriented e-business architectures, which are also still too difficult for SME's to implement. Based on these findings, a high-level e-business interoperability framework concept was proposed as the basis for future research to overcome the found implementation complexities for SME's.

Quality Criteria for Enterprise Modelling in the context of networked Enterprises

The capability for collaboration is a key success factor for networked enterprises. The paper introduces a methodology supporting the application of Enterprise Modelling in order to improve the maturity for collaboration. The methodology considers the current status of maturity for interoperability for deducing the right modelling approach. The approach is combined with quality criteria of the models in order to guide the modelling process. Both the deducing approach and the quality criteria are related to the levels of interoperability proposed by the ATHENA Interoperability Framework.

The METAFOR project: preserving data through metadata standards for climate models and simulations

Climate modeling is a complex process, requiring accurate and complete metadata in order to identify, assess and use climate data stored in digital repositories. The preservation of such data is increasingly important given the development of ever-increasingly complex models to predict the effects of global climate change. The EU METAFOR project has developed a Common Information Model (CIM) to describe climate data and the models and modelling environments that produce this data. There is a wide degree of variability between different climate models and modelling groups. To accommodate this, the CIM has been designed to be highly generic and flexible, with extensibility built in. METAFOR describes the climate modelling process simply as "an activity undertaken using software on computers to produce data." This process has been described as separate UML packages (and, ultimately, XML schemas). This fairly generic structure canbe paired with more specific "controlled vocabularies" in order to restrict the range of valid CIM instances. The CIM will aid digital preservation of climate models as it will provide an accepted standard structure for the model metadata. Tools to write and manage CIM instances, and to allow convenient and powerful searches of CIM databases,. Are also under development. Community buy-in of the CIM has been achieved through a continual process of consultation with the climate modelling community, and through the METAFOR team’s development of a questionnaire that will be used to collect the metadata for the Intergovernmental Panel on Climate Change’s (IPCC) Coupled Model Intercomparison Project Phase 5 (CMIP5) model runs.

e-Government architectures, technical and political situation in Latin America

Includes bibliography

Is Europe ready to provide a pan-European Identity Management System?

European public administrations must manage citizens' digital identities, particularly considering interoperability among different countries. Owing to the diversity of electronic identity management (eIDM) systems, when users of one such system seek to communicate with governments using a different system, both systems must be linked and understand each other. To achieve this, the European Union is working on an interoperability framework. This article provides an overview of eIDM systems' current state at a pan-European level. It identifies and analyzes issues on which agreement exists, as well as those that aren't yet resolved and are preventing the adoption of a large-scale model.