Simultaneous decisions or leadership in an international competition

In this paper, we study an international market with demand uncertainty. The model has two stages. In the first stage, the home government chooses an import tariff to maximize the revenue. Then, the firms engage in a Cournot or in a Stackelberg competition. The uncertainty is resolved between the decisions made by the home government and by the firms. We compare the results obtained in the three different ways of moving on the decision make of the firms.

International competition and globalization challenging the Brazilian automotive industry

Includes bibliography

Evaluation of mission planning strategies of a robotic aerial vehicle for the AIRC international competition

The International Aerial Robotics Competition (IARC) is an important event where teams from universities design flying autonomous vehicles to overcome the last challenges in the field. The goal of the Seventh Mission proposed by the IARC is to guide several mobile ground robots to a target area. The scenario is complex and not determinist due to the random behavior of the ground robots movement. The UAV must select efficient strategies to complete the mission. The goal of this work has been evaluating different alternative mission planning strategies of a UAV for this competition. The Mission Planner component is in charge of taking the UAV decisions. Different strategies have been developed and evaluated for the component, achieving a better performance Mission Planner and valuable knowledge about the mission. For this purpose, it was necessary to develop a simulator to evaluate the different strategies. The simulator was built as an improvement of an existing previous version.

International competition of the Carnegie Foundation : the Palace of Peace at the Hague : the 6 premiated and 40 other designs chosen by the Society of Architecture at Amsterdam and reproduced under its direction.

Vignette by K. Sluyterman on portfolio cover, fasc. wrappers, and t.p.

The international competition for the Phoebe Hearst architectvral plan for the Vniversity of California.

Text in English, French, Italian and German.

The international regulation of transnational mergers

Transnational mergers are mergers involving firms operating in more than one jurisdiction, or which occur in one jurisdiction but have an impact on competition in another. Being of this nature, they have the potential to raise competition law concerns in more than one jurisdiction. When they do, the transaction costs of the merger to the firms involved, and the competition law authorities, are likely to increase significantly and, even where the merger is allowed to proceed, delays are likely to occur in reaping the benefits of the merger. Ultimately, these costs are borne by consumers. This thesis will identify the nature and source of regulatory costs associated with transnational merger review and identify and evaluate possible mechanisms by which these costs might be reduced. It will conclude that there is no single panacea for transnational merger regulation, but that a multi-faceted approach, including the adoption of common filing forms, agreement on filing and review deadlines and continuing efforts toward increasing international cooperation in merger enforcement, is needed to reduce regulatory costs and more successfully improve the welfare outcomes to which merger regulation is directed.

Market structure of international construction professional services: Evidences from top design firms

Construction professional service (CPS) in the international arena has been very competitive despite that the industry is proliferating at a high rate. To excel in international business, CPS firms have the importance of building overseas competition strategies on a proper understanding of the international CPS (I-CPS) market. However, subject to borderless trade, information technology–based networking, global outsourcing, and changing forms of procurement, the I-CPS market structure has become more covert, intricate, and unstraightforward than before. Through examining business competition among top international design firms, this study aims to identify the attributes of the I-CPS market structure from two perspectives—concentration and turnover. Data from Engineering News-Record over the period 2001–2011 were collected to calculate market concentration ratios and turnover indices. The results show that I-CPS competition is characterized by atomism, much turbulence with a steady increase in competition intensity, and the predominant role of new entrants and exiting firms in market turnovers. The combination of concentration and turnover is found useful to address the attributes of the I-CPS market structure, which favors I-CPS firms to formulate international competition strategies in due ways.

R&D investment, international trade, and home market and competitiveness efects

We analyze the effects of R&D investment on international trade. The importance of studying this comes from the fact that one of the most important characteristics of modern industrial organization is that firms try to influence market behavior through strategic variables as R&D. Moreover international competition between firms is, more and more, also centered in R&D competition (besides output and price competition). With this in mind, we develop an oligopolist reciprocal-markets model where firms engage in R&D investment to achieve future reductions in marginal costs. We find ‘home market effects’ at the level of R&D investment, i.e.: firms located in countries that host a higher share of skilled-labor perform higher levels of R&D investment. As consequence, firms in these countries are more competitive than firms in other countries, and as such they can penetrate more easily foreign markets. As result of this ‘competitiveness effect’, countries where these firms are located run trade surplus, while countries where firms perform lower levels of R&D investment incur in trade deficits.

The effectiveness of technical assistance, socio-economic development and the absorptive capacity of competition authorities

Includes bibliography

International Competitiveness of Manufacturing Firms in sub-Saharan Africa

As the success of East Asian countries has shown, labor-intensive industry is recognized to lead economic growth in the early stages of development, utilizing relatively low labor costs. This same growth process has already started in South and South East Asian LDCs since the mid-1990s. However, the manufacturing sector in sub-Saharan Africa has been underdeveloped and manufacturing exports, in particular labour-intensive goods, have stagnated. This paper investigates the international competitiveness of the African manufacturing sector and its determinants through an analytical survey of empirical studies and a comparison with Asian low income countries. Empirical evidences indicate that primary factors of competitiveness, namely productivity, labour cost and exchange rate are unfavorable in sub-Saharan Africa. Representative arguments attribute the weak competitiveness to problems in the business environment, factor endowment, and the exchange rate. However, careful review shows that labour cost is beyond the range explained by endowment and misalignment of exchange rates have been reduced in Africa. Moreover, comparison with Asian low income countries which have competitiveness in labour-intensive goods shows no difference in the quality of business environment, while the labour cost is significantly lower than sub-Saharan African countries. Although results should be considered tentative, high labour cost beyond endowment and conservative investment behavior emerge as important factors for the weak competitiveness in sub-Saharan Africa when controlling income level.

Experiences and methodology in a multidisciplinary energy and architecture competition: Solar Decathlon Europe 2012

Solar Decathlon Europe is an international competition among universities which promotes interdisciplinary learning in engineering and architecture. Students from different disciplines participate in teams guided by several professors during a 29 month preparation period plus five weeks of on-site contest. The educational project involves designing, building and testing a solar energy house connected to the electrical grid with the strategy of maximizing self-consumption, supported by bioclimatic technologies and maintaining a low environmental footprint. It culminates in a on-site contest in which teams must assembly the house themselves, test it with ordinary real life tasks and finally disassembly it. The event has also a divulgative aim, trying to make students and visitors get interested in discovering the problems presented by real engineering and architecture applications. In addition, SDE covers R&D aspects in different fields such as energy efficiency, solar energy and bioclimatic architecture. This article presents the methodology followed during the SDE 2012 edition, in which more than 850 students participated. The obtained results show that the educational competition was a success according to the technical and professional ambitions of the students, most of them considering that their knowledge had increased in areas related to technical and multidisciplinary aspects.

Participatory Patterns in an International Air Quality Monitoring Initiative

The issue of sustainability is at the top of the political and societal agenda, being considered of extreme importance and urgency. Human individual action impacts the environment both locally (e.g., local air/water quality, noise disturbance) and globally (e.g., climate change, resource use). Urban environments represent a crucial example, with an increasing realization that the most effective way of producing a change is involving the citizens themselves in monitoring campaigns (a citizen science bottom-up approach). This is possible by developing novel technologies and IT infrastructures enabling large citizen participation. Here, in the wider framework of one of the first such projects, we show results from an international competition where citizens were involved in mobile air pollution monitoring using low cost sensing devices, combined with a web-based game to monitor perceived levels of pollution. Measures of shift in perceptions over the course of the campaign are provided, together with insights into participatory patterns emerging from this study. Interesting effects related to inertia and to direct involvement in measurement activities rather than indirect information exposure are also highlighted, indicating that direct involvement can enhance learning and environmental awareness. In the future, this could result in better adoption of policies towards decreasing pollution.

Assessing the leanness in product design : a model for planned design reuse

Shrinking product lifecycles, tough international competition, swiftly changing technologies, ever increasing customer quality expectation and demanding high variety options are some of the forces that drive next generation of development processes. To overcome these challenges, design cost and development time of product has to be reduced as well as quality to be improved. Design reuse is considered one of the lean strategies to win the race in this competitive environment. design reuse can reduce the product development time, product development cost as well as number of defects which will ultimately influence the product performance in cost, time and quality. However, it has been found that no or little work has been carried out for quantifying the effectiveness of design reuse in product development performance such as design cost, development time and quality. Therefore, in this study we propose a systematic design reuse based product design framework and developed a design leanness index (DLI) as a measure of effectiveness of design reuse. The DLI is a representative measure of reuse effectiveness in cost, development time and quality. Through this index, a clear relationship between reuse measure and product development performance metrics has been established. Finally, a cost based model has been developed to maximise the design leanness index for a product within the given set of constraints achieving leanness in design process.