Assessment of some physico-chemical parameters of River Ogun (Abeokuta, Ogun State, southwestern Nigeria) in comparison with national and international standards

This study assessed the physico-chemical quality of River Ogun, Abeokuta, Ogun state, Southwestern Nigeria. Four locations were chosen spatially along the water course to reflect a consideration of all possible human activities that are capable of changing the quality of river water. The water samples were collected monthly for seven consecutive months (December 2011 – June 2012) at the four sampling stations. pH, air temperature (℃), water temperature (℃), conductivity (µs/cm) and total dissolved solids (mg/L) were conducted in-situ with the use of HANNA Combo pH and EC multi meter Hi 98129 and Mercury-in-glass thermometer while dissolved oxygen (mg/L), nitrate (mg/L), phosphate (mg/L), alkalinity (mg/L) and hardness (mg/L) were determined ex-situ using standard methods. Results showed that dissolved oxygen, hydrogen ion concentration, total hardness and nitrate were above the maximum permissible limit of National Administration for Food, Drugs and Control (NAFDAC), Standard Organization of Nigeria (SON), Federal Environmental Protection Agency (FEPA), United States Environmental Protection Agency (USEPA), European Union (EU) and World Health Organization (WHO) for drinking water during certain months of the study period. Results also showed that water temperature and conductivity were within the permissible limits of all the standards excluding FEPA. However, total dissolved solids and alkalinity were within the permissible limits of all the standards. Adejuwon and Adelakun, (2012) also reported similar findings on Rivers Lala, Yobo and Agodo in Ewekoro local government area of Ogun state, Nigeria. Since most of the parameters measured were above the maximum permissible limits of the national and international standards, it can be concluded that the water is unfit for domestic uses, drinking and aquacultural purposes and therefore needs to be treated if it is to be used at all. The low dissolved oxygen values for the first four months was too low i.e. < 5 mg/L. This is most likely as a result of the amount of effluents discharged into the river. To prevent mass extinction of aquatic organisms due to anoxic conditions, proper regulations should be implemented to reduce the organic load the river receives.

International standards of business conduct: framework and illustration

Purpose: – The purpose of this paper is to describe the insights and a proposal into the structure of standards of business conduct and its intended applications.

Design/methodology/approach: – The case study is based upon an inductive content analysis of corporate ethics artefacts.

Findings: – It is concluded that the standards of business conduct may be highly prescriptive in world wide corporations, but that there should be an explicit commitment to a flexible and dynamic approach to the application of standards of business conduct.

Research limitations/implications: – An examination of the actual behaviour of a corporation's operations was beyond the scope of the present research, but such a study has potential for future research. This would open up the wider question of how corporations can minimise the gap between corporate intentions and actual outcomes in business operations across national and cultural boundaries.

Practical implications: – These diverse national and cultural contexts that world wide corporations encounter must be taken into consideration in the content of their standards of business conduct.

Originality/value: – The authors emphasise the concern of recognising that the contexts surrounding standards of business conduct are dynamic. Corporate codes of ethics should be regarded as dynamic artefacts. A framework of application is proposed.

International standards for programmes of training in intensive care medicine in Europe.

PURPOSE To develop internationally harmonised standards for programmes of training in intensive care medicine (ICM). METHODS Standards were developed by using consensus techniques. A nine-member nominal group of European intensive care experts developed a preliminary set of standards. These were revised and refined through a modified Delphi process involving 28 European national coordinators representing national training organisations using a combination of moderated discussion meetings, email, and a Web-based tool for determining the level of agreement with each proposed standard, and whether the standard could be achieved in the respondent's country. RESULTS The nominal group developed an initial set of 52 possible standards which underwent four iterations to achieve maximal consensus. All national coordinators approved a final set of 29 standards in four domains: training centres, training programmes, selection of trainees, and trainers' profiles. Only three standards were considered immediately achievable by all countries, demonstrating a willingness to aspire to quality rather than merely setting a minimum level. Nine proposed standards which did not achieve full consensus were identified as potential candidates for future review. CONCLUSIONS This preliminary set of clearly defined and agreed standards provides a transparent framework for assuring the quality of training programmes, and a foundation for international harmonisation and quality improvement of training in ICM.

Aeronautical Metadata Profile based on Geographic International Standards

The aeronautical information plays an essential rolein air safety, chief objective of the aeronautical industry. Community policies and projects are being currently developed for the adequate management of a single European air space. To make this possible, an appropriate information management and a set of tools that allow sharing and exchanging this information, ensuring its interoperability and integrity, are necessary. This paper presents the development and implementation of a metadata profile for description of the aeronautical information based on international regulations and recommendations applied within the geographic scope. The elements taken into account for its development are described, as well as the implementation process and the results obtained.

Index of international standards /

"CODEN: XNBSAV."

A comparison of international occupational therapy competencies : implications for Australian standards in the new millennium

Background/aim: A timely evaluation of the Australian Competency Standards for Entry-Level Occupational Therapists© (1994) was conducted. This thorough investigation comprised a literature review exploring the concept of competence and the applications of competency standards; systematic benchmarking of the Australian Occupational Therapy Competency Standards (OT AUSTRALIA, 1994) against other national and international competency standards and other affiliated documents, from occupational therapy and other cognate disciplines; and extensive nationwide consultation with the professional community. This paper explores and examines the similarities and disparities between occupational therapy competency standards documents available in English from Australia and other countries.----- Methods: An online search for national occupational therapy competency standards located 10 documents, including the Australian competencies.----- Results: Four 'frameworks' were created to categorise the documents according to their conceptual underpinnings: Technical-Prescriptive, Enabling, Educational and Meta-Cognitive. Other characteristics that appeared to impact the design, content and implementation of competency standards, including definitions of key concepts, authorship, national and cultural priorities, scope of services, intended use and review mechanisms, were revealed.----- Conclusion: The proposed 'frameworks' and identification of influential characteristics provided a 'lens' through which to understand and evaluate competency standards. While consistent application of and attention to some of these characteristics appear to consolidate and affirm the authority of competency standards, it is suggested that the national context should be a critical determinant of the design and content of the final document. The Australian Occupational Therapy Competency Standards (OT AUSTRALIA, 1994) are critiqued accordingly, and preliminary recommendations for revision are proposed.

International labour standards and Queensland

Queensland’s legal labour disputes history does not exhibit the current trend seen in Canada and Switzerland (Gravel & Delpech, 2008) where cases citing International Labour Standards (ILS) are often successful (which is not presently the case in Queensland either). The two Queensland cases (Kuhler v. Inghams Enterprises P/L & Anor, 1997 and Bale v. Seltsam Pty Ltd, 1996) that have used ILSs were lost. Australia is a member state of the International Labour Organization (ILO) and a signatory of many ILSs. Yet, ILSs are not used in their legal capacity when compared to other international standards in other areas of law. It is important to recognize that ILSs are uniquely underutilized in labour law. Australian environmental, criminal, and industrial disputes consistently draw on international standards. Why not for the plight of workers? ILSs draw their power from supranational influence in that when a case cites an ILS the barrister or solicitor is going beyond legal precedence and into international peer pressure. An ILS can be appropriately used to highlight that Australian or Queensland legislation does not conform to a Convention or Recommendation. However, should the case deal with a breach of existing law based or modified by an ILS, citing the ILS is a good way to remind the court of its origin. It’s a new legal paradigm critically lacking in Queensland’s labour law practice. The following discusses the research methodology used in this paper. It is followed by a comparative discussion of results between the prevalence of ILSs and other international standards in Queensland case history. Finally, evidence showing the international trend of labour disputes using ILSs for victory is discussed.

Enforcing international financial standards in Brazil: limits and possibilities for adoption of IOSCO principles

Foreign capital and institutional investors play a key role in the Brazilian capital and financial markets. Internationally promoted regulatory patterns, especially IOSCO principles, have been increasingly influencing administrative rule making by the Brazilian Securities and Exchange Commission (CVM) as well as the adoption of transnational rules in Brazil by means of self-regulatory activity. Even though there is a certain level of convergence of market regulatory standards at the transnational level, implementation and enforcement of rules remains essentially domestic. We analyze two case studies regarding the transposition of international standards into the Brazilian legal system, which illustrate this tension between the transnational and domestic dimensions of financial markets regulation. The first case concerns a CVM rule on disclosure of executive compensation and the its interpretation by local courts. The second case refers to the adoption of suitability rules.

Interoperable Standards Development : Final Report

Since 1995 the buildingSMART International Alliance for Interoperability (buildingSMART)has developed a robust standard called the Industry Foundation Classes (IFC). IFC is an object oriented data model with related file format that has facilitated the efficient exchange of data in the development of building information models (BIM). The Cooperative Research Centre for Construction Innovation has contributed to the international effort in the development of the IFC standard and specifically the reinforced concrete part of the latest IFC 2x3 release. Industry Foundation Classes have been endorsed by the International Standards Organisation as a Publicly Available Specification (PAS) under the ISO label ISO/PAS 16739. For more details, go to http://www.tc184- sc4.org/About_TC184-SC4/About_SC4_Standards/ The current IFC model covers the building itself to a useful level of detail. The next stage of development for the IFC standard is where the building meets the ground (terrain) and with civil and external works like pavements, retaining walls, bridges, tunnels etc. With the current focus in Australia on infrastructure projects over the next 20 years a logical extension to this standard was in the area of site and civil works. This proposal recognises that there is an existing body of work on the specification of road representation data. In particular, LandXML is recognised as also is TransXML in the broader context of transportation and CityGML in the common interfacing of city maps, buildings and roads. Examination of interfaces between IFC and these specifications is therefore within the scope of this project. That such interfaces can be developed has already been demonstrated in principle within the IFC for Geographic Information Systems (GIS) project. National road standards that are already in use should be carefully analysed and contacts established in order to gain from this knowledge. The Object Catalogue for the Road Transport Sector (OKSTRA) should be noted as an example. It is also noted that buildingSMART Norway has submitted a proposal

ISO 13567 - The Proposed International Standard for Structuring Layers in Computer Aided Building Design

Layering is a widely used method for structuring data in CAD-models. During the last few years national standardisation organisations, professional associations, user groups for particular CAD-systems, individual companies etc. have issued numerous standards and guidelines for the naming and structuring of layers in building design. In order to increase the integration of CAD data in the industry as a whole ISO recently decided to define an international standard for layer usage. The resulting standard proposal, ISO 13567, is a rather complex framework standard which strives to be more of a union than the least common denominator of the capabilities of existing guidelines. A number of principles have been followed in the design of the proposal. The first one is the separation of the conceptual organisation of information (semantics) from the way this information is coded (syntax). The second one is orthogonality - the fact that many ways of classifying information are independent of each other and can be applied in combinations. The third overriding principle is the reuse of existing national or international standards whenever appropriate. The fourth principle allows users to apply well-defined subsets of the overall superset of possible layernames. This article describes the semantic organisation of the standard proposal as well as its default syntax. Important information categories deal with the party responsible for the information, the type of building element shown, whether a layer contains the direct graphical description of a building part or additional information needed in an output drawing etc. Non-mandatory information categories facilitate the structuring of information in rebuilding projects, use of layers for spatial grouping in large multi-storey projects, and storing multiple representations intended for different drawing scales in the same model. Pilot testing of ISO 13567 is currently being carried out in a number of countries which have been involved in the definition of the standard. In the article two implementations, which have been carried out independently in Sweden and Finland, are described. The article concludes with a discussion of the benefits and possible drawbacks of the standard. Incremental development within the industry, (where ”best practice” can become ”common practice” via a standard such as ISO 13567), is contrasted with the more idealistic scenario of building product models. The relationship between CAD-layering, document management product modelling and building element classification is also discussed.