Preparation and characterization of ordered intermetallic platinum phases for electrocatalytic applications

Ordered intermetallic phases of Pt with several transition metals have been prepared and their electrocatalytic properties studied. In light of these tests it is proposed that these catalysts could be used as electrodes in fuel cells, as they combine an excellent capacity to adsorb organic fuels at the Pt sites with low susceptibility to being poisoned by intermediates and reaction products at the transition-metal sites. An experimental procedure used to obtain the four intermetallic phases Pt-M (M = Mn, Pb, Sb and Sn) is described. The phases thus produced were characterized by X-ray diffraction, scanning electron microscopy with surface analysis by energy-dispersive X-ray spectrometry, scanning tunneling microscopy and X-ray photoelectron spectroscopy. The data thus obtained support the conclusion that the method described here is highly effective for the preparation of Pt-M phases featuring a range of structural and electronic modifications that will allow a useful relation to be established between their physicochemical properties and predicted electrocatalytic activity. (C) 2007 Elsevier Ltd. All rights reserved.

The kinetics of two-stage formation of TiAl3 in multilayered Ti/Al foils prepared by accumulative roll bonding

The solid-state reactions of Ti/Al multilayered samples produced by Accumulative Roll Bonding (ARB) have been investigated using differential scanning calorimetry, X-ray diffraction and scanning electron microscopy. The kinetics of the formation of the intermetallic compound TiAl3 was highlighted. Experimental evidence and analysis of the data shows that, there was a two-stage process in the formation of TiAl₃ in the ARB Ti/Al reactive multilayered samples. Calorimetric and microstructural analyses also suggest that the interdiffusion of Al and Ti which led to solid solutions preceded the formation of intermetallic compounds. Despite the apparent chaos in the thickness of the ARB multilayered samples, the distribution of layer spacing did not become broad enough to lose the main features of the double exothermal behaviour. Isothermal DSC shows a larger Avarami constant in ARB Ti/Al multilayered structures than was found in Ti/Al thin films. A modified model based on thin films was set up to describe the kinetic characteristics of the formation of the intermetallic compound TiAl₃ in ARB samples.

Preparation and characterization of ordered intermetallic platinum phases for electrocatalytic applications

Ordered intermetallic phases of Pt with several transition metals have been prepared and their electrocatalytic properties studied. In light of these tests it is proposed that these catalysts could be used as electrodes in fuel cells, as they combine an excellent capacity to adsorb organic fuels at the Pt sites with low susceptibility to being poisoned by intermediates and reaction products at the transition-metal sites. An experimental procedure used to obtain the four intermetallic phases Pt-M (M = Mn, Pb, Sb and Sn) is described. The phases thus produced were characterized by X-ray diffraction, scanning electron microscopy with surface analysis by energy-dispersive X-ray spectrometry, scanning tunneling microscopy and X-ray photoelectron spectroscopy. The data thus obtained support the conclusion that the method described here is highly effective for the preparation of Pt-M phases featuring a range of structural and electronic modifications that will allow a useful relation to be established between their physicochemical properties and predicted electrocatalytic activity. (C) 2007 Elsevier Ltd. All rights reserved.

LIII absorption edge studies of mixed valent cerium intermetallics and related systems

LIII absorption edge measurements clearly delineate 3+ and 4+ states of Ce. Absorption edges of 3+ compounds show a single peak, while those of 4+ compounds show two peaks, both appearing at higher energies than the characteristic peaks of 3+ compounds. In systems where there is interconfigurational fluctuation, features due to both 3+ and 4+ states are distinctly seen.

Valence fluctuation in some Yb intermetallics by X-ray photoemission and X-ray absorption

The valence state of Yb in some of its intermetallics, YbNi2Ge2, YbCu2Si2 and YbPd2Si2 has been investigated by LIII(Yb) absorption edges and X-ray pnotoelectron spectra in the 4f and 4d regions. These studies establish the presence of mixed valence in all three systems and illustrate the utility of 4f and 4d spectra in the study of mixed valence in Yb compounds.

Miscellaneous materials regarding Newport

Digital image

Thermodynamic properties of Pt5La, Pt5Ce, Pt5Pr, Pt5Tb and Pt5Tm intermetallics

The Gibbs’ energies of formation of Pt5La, Pt5Ce, Pt5Pr, Pt5Tb and Pt5 Tm intermetallic compounds have been determined in the temperature range 870–1100 K using the solid state cell:Ta,M + MF3 /CaF2 /Pt5 M + Pt + MF3 ,TaTaM+MF3CaF2Pt5M+Pt+MF3Ta.The reversible emf of the cell is directly related to the Gibbs’ energy of formation of the Pt5M compound. The results can be summarized by the equations:DGf° á Pt5 La ñ = - 373,150 + 6 ·60 T( ±300 )J mol - 1 DGf° á Pt5 Ce ñ = - 367,070 + 5 ·79 T( ±300 )J mol - 1 DGf° á Pt5 Pr ñ = - 370,540 + 4 ·69 T( ±300 )J mol - 1 DGf° á Pt5 Tb ñ = - 372,280 + 4 ·11 T( ±300 )J mol - 1 DGf° á Pt5 Tm ñ = - 368,230 + 4 ·89 T( ±300 )J mol - 1 Unknown control sequence '\hfill'relative to the low temperature allotropic form of the lanthanide element and solid platinum as standard states The enthalpies of formation of all the Pt5M intermetallic compounds obtained in this study are in good agreement with Miedema’s model. The experimental values are more negative than those calculated using the model. The variation of the thermodynamic properties of Pt5M compounds with atomic number of the lanthanide element is discussed in relation to valence state and molar volume.

The standard molar Gibbs energy of formation of YbPt3 and LuPt3 intermetallics

The standard molar Gibbs energies of formation of YbPt3 and LuPt3 intermetallic compounds have been measured in the temperature range 880 K to 1100 K using the solid-state cells:View the MathML source and View the MathML source The trifluoride of Yb is not stable in equilibrium with Yb or YbPt3. The results can be expressed by the equations: View the MathML source View the MathML source The standard molar Gibbs energy of formation of LuPt3 is −41.1 kJ · mol−1 more negative than that for YbPt3 at 1000 K. Ytterbium is divalent in the pure metal and trivalent in the intermetallic YbPt3. The energy required for the promotion of divalent Yb to the trivalent state is responsible for the less negative ΔfGmo of YbPt3. The enthalpies of formation of the two intermetallics are in reasonable agreement with Miedema's model. Because of the extraordinary stability of these compounds it is possible to reduce oxides of Yb and Lu with hydrogen in the presence of platinum at View the MathML source. The equilibrium chemical potential of oxygen corresponding to the reduction of Yb2O3 and Lu2O3 by hydrogen in the presence of platinum is presented in the form of an Ellingham diagram.

Mechanistic Insights into a Non-Classical Diffusion Pathway for the Formation of Hollow Intermetallics: A Route to Multicomponent Hollow Structures

Hollow nanostructures are used for various applications including catalysis, sensing, and drug delivery. Methods based on the Kirkendall effect have been the most successful for obtaining hollow nanostructures of various multicomponent systems. The classical Kirkendall effect relies on the presence of a faster diffusing species in the core; the resultant imbalance in flux results in the formation of hollow structures. Here, an alternate non-Kirkendall mechanism that is operative for the formation of hollow single crystalline particles of intermetallic PtBi is demonstrated. The synthesis method involves sequential reduction of Pt and Bi salts in ethylene glycol under microwave irradiation. Detailed analysis of the reaction at various stages indicates that the formation of the intermetallic PtBi hollow nanoparticles occurs in steps. The mechanistic details are elucidated using control experiments. The use of microwave results in a very rapid synthesis of intermetallics PtBi that exhibits excellent electrocatalytic activity for formic acid oxidation reaction. The method presented can be extended to various multicomponent systems and is independent of the intrinsic diffusivities of the species involved.

Miscellaneous studies

MISCELLANEOUS STUDIES, which includes the following papers: "Geology of the Area in and Around the Jim Woodruff Reservoir" by Charles W. Hendry, Jr. and J. William Yon, Jr.; "Phosphate Concentrations near Bird Rookeries in South Florida" by Dr. Ernest H. Lund, Department of Geology, Florida State University; and "An Analysis of Ochlockonee River Channel Sediments" by Dr. Ernest H. Lund, Associate Professor and Patrick C. Haley, Graduate Assistant, Department of Geology, Florida State University. (PDF contains 81 pages)

Miscellaneous translations on oyster biology (contents page only - individual articles held as separate documents)

This is a translation of selected articles from the Japanese language publication Hiroshimaken Suisan Shikenjo Hokoku (Report of Hirshima Prefectural Fisheries Experimental Station), Hiroshima City, Japan, vol.22, no. 1, 1960, pages 1-76. Articles translated are: Haematological study of bacteria affected oysters, The distribution of oyster larvae and spatfalls in the Hiroshima City perimeter, On the investigation of the timing of spatfalls, On the prediction of oyster seeding at inner Hiroshima Bay, Oyster growth and its environment at the oyster farm in Hiroshima Bay

Protein hydrolysate from miscellaneous fish

A method to prepare fish protein hydrolysate from miscellaneous fish obtained as by catch from shrimp trawlers is outlined. Effect of temperature and concentration of enzyme papain on the yield of hydrolysates has been determined. It is seen that within 30 min at 55°C and pH 6.5 fish proteins can be effectively solubilized, provided the nitrogen content of the enzyme (activity 10 units/mg enzyme) and substrate are maintained in the ratio 1:30. This hydrolysate possesses the best amino acid pattern compared to those obtained after hydrolysis for 60 to 180 min.

Isolation and characterization of miscellaneous terpenoids of Schisandra chinensis

Two new bisnortriterpenoids with 18-norschiartane skeleton, wuweizidilactones G (1) and H (2), four new highly oxygenated nortriterpenoids based on a schisanartane skeleton, schindilactones D-G (3-6), a pre-schisanartane skeleton, pre-schisanartanin B (7)