Kinetics of interface state-limited hole injection in alpha-naphthylphenylbiphenyl diamine (alpha-NPD) thin layers

Injection-limited operation is identified in thin-film, alpha-NPD-based diodes. A detailed model for the impedance of the injection process is provided which considers the kinetics of filling/releasing of interface states as the key factor behind the injection mechanism. The injection model is able to simultaneously account for the steady-state, current-voltage (J-V) characteristics and impedance response. and is based on the sequential injection of holes mediated by energetically distributed surface states at the metal-organic interface. The model takes into account the vacuum level offset caused by the interface dipole, along with the partial shift of the interface level distribution with bias voltage. This approach connects the low-frequency (similar to 1 Hz) capacitance spectra, which exhibits a transition between positive to negative values, to the change in the occupancy of interface states with voltage. Simulations based on the model allow to derive the density of interface states effectively intervening in the carrier injection (similar to 5 x 10(12) cm(-2)), which exhibit a Gaussian-like distribution. A kinetically determined hole barrier is calculated at levels located similar to 0.4 eV below the contact work function. (C) 2008 Elsevier B.V. All rights reserved.

Determination of density of states in PPS from space-charge-limited current measurements

Space-charge-limited currents measurements have been carried out on undoped amorphous poly p-phenylene sulfide. The scaling law is checked for different samples with varying thickness, and J-V data analyzed. The position of the quasi-Fermi level and the density of states was obtained.

Space charge limited current flow from a plane, plasma cathode,

"Prepared for the Air Force Ballistic Missile Division, Headquarters Air Research and Development Command, under contract AF 04(647)-309, Thermonuclear Propulsion Research."

Determination of carrier mobility in MEH-PPV thin-films by stationary and transient current techniques

Charge transport and shelf-degradation of MEH-PPV thin-films were investigated through stationary (e.g. current versus voltage - JxV) and transient (e.g. Time-of-Flight - ToF, Dark-Injection Space-Charge-Limited Current - DI-SCLC, Charge Extraction by Linearly Increasing Voltage - CELN) current techniques. Charge carrier mobility in nanometric films was best characterized through JxV and DI-SCLC. It approaches 10(-6) cm(2)Ns under a SCLC regime with deep traps for light-emitting diode applications. ToF measurements performed on micrometric layers (i.e. - 3 mu m) confirmed studies in 100 nm-thick films as deposited in OLEDs. All results were comparable to a similar poly(para-phenylene vinylene) derivative, MDMO-PPV. Electrical properties extracted from thin-film transistors demonstrated mobility dependence on carrier concentration in the channel (similar to 10(-7)-10(-4) cm(2)/Vs). At low accumulated charge levels and reduced free carrier concentration, a perfect agreement to the previously cited techniques was observed. Degradation was verified through mobility reduction and changes in trap distribution of states. (C) 2011 Elsevier B.V. All rights reserved.

Perylene Diimide acceptors: Fabrication and characterization of electron-only, hole-only devices and solar cells

The thrust towards energy conservation and reduced environmental footprint has fueled intensive research for alternative low cost sources of renewable energy. Organic photovoltaic cells (OPVs), with their low fabrication costs, easy processing and flexibility, represent a possible viable alternative. Perylene diimides (PDIs) are promising electron-acceptor candidates for bulk heterojunction (BHJ) OPVs, as they combine higher absorption and stability with tunable material properties, such as solubility and position of the lowest unoccupied molecular orbital (LUMO) level. A prerequisite for trap free electron transport is for the LUMO to be located at a level deeper than 3.7 eV since electron trapping in organic semiconductors is universal and dominated by a trap level located at 3.6 eV. Although the mostly used fullerene acceptors in polymer:fullerene solar cells feature trap-free electron transport, low optical absorption of fullerene derivatives limits maximum attainable efficiency. In this thesis, we try to get a better understanding of the electronic properties of PDIs, with a focus on charge carrier transport characteristics and the effect of different processing conditions such as annealing temperature and top contact (cathode) material. We report on a commercially available PDI and three PDI derivatives as acceptor materials, and its blends with MEH-PPV (Poly[2-methoxy 5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) and P3HT (Poly(3-hexylthiophene-2,5-diyl)) donor materials in single carrier devices (electron-only and hole-only) and in solar cells. Space-charge limited current measurements and modelling of temperature dependent J-V characteristics confirmed that the electron transport is essentially trap-free in such materials. Different blend ratios of P3HT:PDI-1 (1:1) and (1:3) show increase in the device performance with increasing PDI-1 ratio. Furthermore, thermal annealing of the devices have a significant effect in the solar cells that decreases open-circuit voltage (Voc) and fill factor FF, but increases short-circuit current (Jsc) and overall device performance. Morphological studies show that over-aggregation in traditional donor:PDI blend systems is still a big problem, which hinders charge carrier transport and performance in solar cells.

Correlation between charge transport and electroluminescence properties of Si-rich oxide/nitride/oxide-based light emitting capacitors.

The electrical and electroluminescence (EL) properties at room and high temperatures of oxide/ nitride/oxide (ONO)-based light emitting capacitors are studied. The ONO multidielectric layer is enriched with silicon by means of ion implantation. The exceeding silicon distribution follows a Gaussian profile with a maximum of 19%, centered close to the lower oxide/nitride interface. The electrical measurements performed at room and high temperatures allowed to unambiguously identify variable range hopping (VRH) as the dominant electrical conduction mechanism at low voltages, whereas at moderate and high voltages, a hybrid conduction formed by means of variable range hopping and space charge-limited current enhanced by Poole-Frenkel effect predominates. The EL spectra at different temperatures are also recorded, and the correlation between charge transport mechanisms and EL properties is discussed.

The dimensions of expatriate adjustment

A narrow and partial theoretical base has limited current concepts of expatriate adjustment and the research based upon them. This conceptual article explores one of the less theorized aspects of expatriate adjustment: the fact that it has multiple dimensions. We conceive of adjustment as a person-environment relationship that takes place in the three dimensions of cognitions, feelings, and behaviors. Combining these elements takes us one step closer to a comprehensive and more realistic understanding of the nature of expatriate adjustment. We include suggestions for future research that follow from our reconceptualization

Electrical transport mechanisms and structure of hydrogenated and non-hydrogenated nanocrystalline Ga1-xMnxAs films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Order induced charge carrier mobility enhancement in columnar liquid crystal diodes

Discotic molecules comprising a rigid aromatic core and flexible side chains have been promisingly applied in OLEDs as self-organizing organic semiconductors. Due to their potentially high charge carrier mobility along the columns, device performance can be readily improved by proper alignment of columns throughout the bulk. In the present work, the charge mobility was increased by 5 orders of magnitude due to homeotropic columnar ordering induced by the boundary interfaces during thermal annealing in the mesophase. State-of-the-art diodes were fabricated using spin-coated films whose homeotropic alignment with formation of hexagonal germs was observed by polarizing optical microscopy. The photophysical properties showed drastic changes at the mesophase-isotropic transition, which is supported by the gain of order observed by X-ray diffraction. The electrical properties were investigated by modeling the current−voltage characteristics by a space-charge-limited current transport with a field dependent mobility.

Trasporto di carica in film sottili di rubrene

Lo scopo della tesi risiede nel caratterizzare film sottili di Rubrene cresciuti per mezzo dell’epitassia molecolare. In particolare si è studiata la densità di stati di trappola con il fine di determinare il grado di purezza di questi campioni. Partendo dalle caratteristiche I-V (Corrente-Tensione) in temperatura è stato possibile utilizzare il modello TM-SCLC (Temperature Modulated Space Charge Limited Current)concludendo che i campioni così cresciuti raggiungono un grado di purezza maggiore rispetto al Rubrene bulk ed escludendo la presenza di difetti estrinseci.

Rivelatori organici di raggi x

L’interesse della ricerca per le applicazioni dei materiali organici all’elettronica è cresciuto ampiamente negli ultimi anni e alcuni gruppi di ricerca hanno studiato la possibilità di sfruttare materiali organici per costruire rivelatori diretti di raggi X. Nel 2003 si immaginava che l’assenza di elementi con numero atomico alto, propria della maggior parte degli organici, scoraggiasse il loro impiego come rivelatori. Tuttavia, la recente scoperta delle proprietà di fotoassorbimento dei monocristalli di 4-idrossicianobenzene (4HCB) potrebbe smentire questa ipotesi e, anzi, suscitare un certo interesse applicativo. Tra i possibili vantaggi operativi del 4HCB come rivelatore ci potrebbero essere, oltre al basso costo, tensioni di funzionamento sull’ordine dei volt e una certa flessibilità meccanica. L’obiettivo del seguente lavoro di tesi è esplorare la risposta che forniscono i monocristalli di 4HCB ai raggi X quando vengono installati su matrici flessibili con elettrodi di contatto in geometrie particolari, interspaziati di 22 µm. Sono state condotte varie misure di risposta elettrica al buio e sotto un fascio di raggi X e nel seguito saranno presentati i risultati. Il primo capitolo è dedicato ad un’introduzione teorica alla struttura dei materiali organici e ai modelli di trasporto dei semiconduttori organici. È evidenziato il fatto che non esiste ad oggi una teoria comprensiva ed efficace come per gli inorganici e vengono discussi alcuni metodi per determinare sperimentalmente la mobilità. La teoria Space Charge Limited Current (SCLC), che modella le caratteristiche corrente-tensione di un solido di piccolo spessore, quando il materiale ha bassa conducibilità e il suo trasporto di carica è mediato sostanzialmente da portatori dello stesso segno, viene introdotta nel capitolo 2. L’importanza di questo modello sta nel fatto che fornisce un metodo efficace per determinare sperimentalmente la mobilità dei portatori in molti materiali organici. Il campo dei rivelatori organici diretti di raggi X è piuttosto recente, e non esiste ancora un’efficace inquadratura teorica. Per questo motivo il capitolo 3 espone lo stato attuale dei rivelatori di raggi X e presenta i meccanismi alla base dei rivelatori inorganici diretti a stato solido e poi discute dei rivelatori organici indiretti già esistenti, gli scintillatori. La descrizione degli apparati sperimentali utilizzati per le misure viene demandata al capitolo 4, mentre il quinto capitolo espone i risultati ottenuti.

Electrical spectroscopy of rubrene bulk and thin film crystals

One of the most diffused electronic device is the field effect transistor (FET), contained in number of billions in each electronic device. Organic optoelectronics is an emerging field that exploits the unique properties of conjugated organic materials to develop new applications that require a combination of performance, low cost and processability. Organic single crystals are the material with best performances and purity among the variety of different form of organic semiconductors. This thesis is focused on electrical and optical characterization of Rubrene single crystal bulk and thin films. Rubrene bulk is well known but for the first time we studied thin films. The first Current-voltage characterization has been performed for the first time on three Rubrene thin films with three different thickness to extract the charge carriers mobility and to assess its crystalline structure. As results we see that mobility increase with thickness. Field effect transistor based on Rubrene thin films on $SiO_2$ have been characterize by current-voltage (I-V) analyses (at several temperatures) and reveals a hopping conduction. Hopping behavior probably is due to the lattice mismatch with the substrate or intrinsic defectivity of the thin films. To understand effects of contact resistance we tested thin films with the Transmission Line Method (TLM) method. The TLM method revealeds that contact resistance is negligible but evidenced a Schottky behavior in a limited but well determined range of T. To avoid this effect we carried out annealing treatment after the electrode evaporation iswe performed a compete I-V characterization as a function of in temperature to extract the electronic density of states (DOS) distribution through the Space Charge Limited Current (SCLC) method. The results show a DOS with an exponential trenddistribution, as expected. The measured mobility of thin films is about 0.1cm^2/Vs and it increases with the film thickness. Further studies are necessary to investigate the reason and improve performances. From photocurrent spectrum we calculated an Eg of about 2.2eV and both thin films and bulk have a good crystal order. Further measurement are necessary to solve some open problems

Transport Properties and Novel Sensing Applications of Organic Semiconducting Crystals

The present thesis is focused on the study of Organic Semiconducting Single Crystals (OSSCs) and crystalline thin films. In particular solution-grown OSSC, e.g. 4-hdroxycyanobenzene (4HCB) have been characterized in view of their applications as novel sensors of X-rays, gamma-rays, alpha particles radiations and chemical sensors. In the field of ionizing radiation detection, organic semiconductors have been proposed so far mainly as indirect detectors, i.e. as scintillators or as photodiodes. I first study the performance of 4HCB single crystals as direct X-ray detector i.e. the direct photon conversion into an electrical signal, assessing that they can operate at room temperature and in atmosphere, showing a stable and linear response with increasing dose rate. A dedicated study of the collecting electrodes geometry, crystal thickness and interaction volume allowed us to maximize the charge collection efficiency and sensitivity, thus assessing how OSSCs perform at low operating voltages and offer a great potential in the development of novel ionizing radiation sensors. To better understand the processes generating the observed X-ray signal, a comparative study is presented on OSSCs based on several small-molecules: 1,5-dinitronaphthalene (DNN), 1,8-naphthaleneimide (NTI), Rubrene and TIPS-pentacene. In addition, the proof of principle of gamma-rays and alpha particles has been assessed for 4HCB single crystals. I have also carried out an investigation of the electrical response of OSSCs exposed to vapour of volatile molecules, polar and non-polar. The last chapter deals with rubrene, the highest performing molecular crystals for electronic applications. We present an investigation on high quality, millimeter-sized, crystalline thin films (10 – 100 nm thick) realized by exploiting organic molecular beam epitaxy on water-soluble substrates. Space-Charge-Limited Current (SCLC) and photocurrent spectroscopy measurements have been carried out. A thin film transistor was fabricated onto a Cytop® dielectric layer. The FET mobility exceeding 2 cm2/Vs, definitely assess the quality of RUB films.

Trasporto di carica in cristalli organici semiconduttori

Uno dei settori che più si stanno sviluppando nell'ambito della ricerca applicata è senza dubbio quello dell'elettronica organica. Nello specifico lo studio è sospinto dagli indubbi vantaggi che questi dispositivi porterebbero se venissero prodotti su larga scala: basso costo, semplicità realizzativa, leggerezza, flessibilità ed estensione. È da sottolineare che dispositivi basati su materiali organici sono già stati realizzati: si parla di OLED (Organic Light Emitting Diode) LED realizzati sfruttando le proprietà di elettroluminescenza di alcuni materiali organici, OFET (Organig Field Effect Transistor) transistor costruiti con semiconduttori organici, financo celle solari che sfruttano le buone proprietà ottiche di questi composti. Oggetto di analisi di questa tesi è lo studio delle proprietà di trasporto di alcuni cristalli organici, al fine di estrapolarne la mobilità intrinseca e verificare come essa cambi se sottoposti a radiazione x. I due cristalli su cui si è focalizzata questa trattazione sono il 1,5-Dinitronaphtalene e il 2,4-Dinitronaphtol; su di essi è stata eseguita una caratterizzazione ottica e una elettrica, in seguito interpretate con il modello SCLC (Space Charge Limited Current). I risultati ottenuti mostrano che c'è una differenza apprezzabile nella mobilità nei due casi con e senza irraggiamento con raggi x.

Prevalence and risk factors for Helicobacter pylori in the Ysleta del Sur Pueblo population

Background: Helicobacter pylori infection among Native Americans is more prevalent than any other minority group in the United States. Few studies involving Helicobacter pylori have been conducted on Native Americans and no previous studies have been conducted in the Ysleta del Sur Pueblo population. Therefore we wanted to explore the prevalence and risk factors of Helicobacter pylori within this community. We also explored whether household transmission is occurring. ^ Materials and Methods: We conducted a cross-section study on the prevalence of Helicobacter pylori in the Ysleta del Sur Pueblo community. Main household caregivers were interviewed on household conditions, hygiene practices, and household sociodemographics. All household members were tested for IgG urine antibodies against Helicobacter pylori using RAPIRUN test kits. 13C urea breath testing using BREATHTEK kits was provided to study participants that had positive antibody results and utilized as confirmatory results of infection. ^ Results: Prevalence of Ysleta del Sur Pueblo was determined to be 27.4%. When comparing for ethnicity, Native Americans had increased prevalence of infection then Mexican-Americans living on the Pueblo. That prevalence increased from 1.6 to 3.3 when taking account only United States born study participants. The household secondary prevalence rate was found to be 23.8%. Helicobacter pylori infection rates increased with increasing age and decreasing income. ^ Conclusions: Native Americans had an increased risk of infection. As expected risk factors for Helicobacter pylori correlated with previous studies, but we found evidence of limited current transmission within households. However, due to the limited sample size (n=62) and power, we were not able to find statistical significance for some risk factors. A statistical association was found with age where increasing prevalence corresponded with increasing age suggesting that the birth cohort may be in effect within this population.^