Neue Aspekte zur effektiven bronchialen Applikation inhalativer Medikamente im Kindesalter

Zur bronchialen Deposition von Arzneimitteln stehen im Wesentlichen drei Inhalationssysteme zur Verfügung: (1) Dosier-Aerosole (pressurized Metered Dose Inhaler, pMDI), (2) Trockenpulver-Inhalatoren (Dry Powder Inhaler, DPI) und (3) Druckluftvernebler zur Feuchtinhalation. Der Erfolg einer Inhalationstherapie hängt neben anderen Faktoren (s.u.) wesentlich vom Depositionsverhalten des als Aerosol inhalierten Medikamentes ab. Wie viel wirksame Substanz lagert sich an welchen Stellen der Atemwege ab und welche Dosis erreicht letztlich die kleinen Atemwege? Einflussfaktoren sind hier vor allem die Partikelgröße und die Inhalationstechnik. So verlangen beispielsweise DPI’s einen respiratorischen Spitzenfluss (PIF) von mindestens 30 l/min, wohingegen bei der Verwendung von pMDI’s ein gleich bleibender PIF von 40 bis 90 l/min erwünscht ist. Die für das jeweilige Inhalationssystem optimale Atemtechnik muss also vom Patienten erlernt werden. Mit den eigenen Arbeiten soll das Verständnis inhalativer Vorgänge sowie die bronchiale Deposition von inhalativen Medikamenten bei pädiatrischen Patienten verbessert werden. Aus der Vielzahl der Inhalatoren wählten wir für unsere Versuche fünf Systeme aus, deren unterschied-liche Anforderungen an den Patienten repräsentativ überprüft wurden: (1) DPI mit mittlerem Widerstand: Diskus®, (2) DPI mit hohem Widerstand: Turbohaler®, (3) pMDI: Autohaler®, (4) pMDI für Säuglinge: Budiair® mit verschiedenen Vorsatzkammern (Babyhaler®, AeroChamber® Plus small und medium) und (5) nachfüllbarer DPI mit niedrigem Widerstand: MAGhaler®. Für unsere Studien unverzichtbar war außerdem ein Testsystem, mit dem die Fähigkeit der Patienten überprüft und verbessert werden kann, einen bestimmten Inhalator effektiv zu benutzen, d.h. das gewünschte Atemmanöver durchzuführen und damit eine optimale Medikamenten-Deposition zu erreichen. Erste Untersuchungen ergaben, dass die kommerziell auf dem Markt verfügbaren Testsysteme suboptimal sind, weil sie sich nur auf die Messung des PIF’s konzentrieren und andere für die Deposition wichtige Parameter (Beschleunigung, Inhaltionsdauer etc.) außer Acht lassen. Wir entwickelten daher den Inhalation-Manager, der die Dokumentation des gesamten Atemmanövers ermöglicht. Es handelt sich dabei um ein computerbasiertes Mess- und Kontrollsystem, das unmittelbar nach der Inhalation ein optisches feedback des gesamten Manövers inklusive des generierten Partikelspektrums liefert. Die daraus weiterentwickelte Schulungssoftware ermöglicht die individuelle Schulung verschiedener Inhalationsmanöver auch mit neuen Inhalatoren. Patient und Arzt erhalten eine optische Rückmeldung, die den Erfolg oder Misserfolg der Inhalation erkennen lässt. Erste Schulungen mit dem neuen System von pädiatrischen Patienten mit Asthma bronchiale verliefen positiv: der Anteil der optimalen Inhalationsmanöver und damit auch der Therapieerfolg stiegen an. Allerdings zeigte sich auch, dass verschiedene Systeme nicht gleichzeitig geschult werden sollten. Generelle Schwierigkeiten bereitet die Inhalationstherapie von Kindern bis etwa zum 4. Geburtstag, da diese meist gar kein Inhalationsmanöver erlernen können. Die Medikamente müssen somit durch den Ruheatemfluss ins Bronchialsystem transportiert werden, wobei Dosieraerosole mit Vorsatzkammern (Spacer) oder Vernebler mit Masken zum Einsatz kommen sollten. Bei der Inhalation mit Spacer war bislang unklar, wie viel Prozent der Nominaldosis letztlich in die Lunge gelangen und therapeutisch wirksam werden. Unsere in-vitro Studien mit einem Dosieraerosol und verschiedenen Spacern zeigten, dass nach fünf Atemzügen maximal 20% der Nominaldosis das Gerät bzw. den Spacer verlassen. Nach nur einem Atemzug und bei Verwendung bestimmter Spacer (großes Totraumvolumen) beträgt dieser Wert sogar nur 5%. Dieses Ergebnis belegt, dass man vom Säuglings- bis zum Erwachsenenalter nahezu die gleiche Nominaldosis verabreichen kann, da durch unterschiedliche Inhalationsmanöver und –systeme die wirksame Dosis extrakorporal auf die altersentsprechende Dosis reduziert wird. Ein besonderes Problem ergibt sich schließlich bei der Feuchtinhalation mit Druckluftverneblern. Hier darf die Kompatibilität von unterschiedlichen Inhalationslösungen nicht außer Acht gelassen werden. So gaben in unserer Mukoviszidose-Ambulanz viele Betroffene an, aus Zeitgründen unterschiedliche Inhalationslösungen bei der Feuchtinhalation zu mischen. Physikalisch-chemische Inkompatibilitäten können dann die Wirksamkeit der Therapie beeinträchtigen und auch zu unerwünschten Nebenwirkungen führen. In einer interdisziplinären Arbeitsgruppe mit Chemikern und Pharmazeuten untersuchten wir daher die Mischbarkeit von häufig genutzten Inhalationslösungen (Salbutamol, Ipratropium, Cromoglicinsäure, Budenosid, Tobramycin und Dornase Alpha) und stellten die Ergebnisse (mögliche Inhaltionskombinationen) tabellarisch zusammen.

Adhesion and dispersion of salmeterol xinofoate from lactose interactive mixtures for inhalation - can surface roughness of carriers determine performance

The objective was to understand the influence of the surface roughness of lactose carriers on the adhesion and dispersion of salmeterol xinafoate (SX) from interactive mixtures. The surface roughness of lactose carriers was determined by confocal microscopy. Particle images and adhesion forces between SX and lactose particles were determined by Atomic Force Microscopy. The dispersion of SX (2.5%) from interactive mixtures with lactose was determined using a twin-stage impinger (TSI) with a Rotahaler® at an airflow rate of 60L/min. SX was analysed using a validated HPLC assay. The RMS Rq of lactose carriers ranged from 0.93-2.84μm, the Fine Particle Fraction (FPF) of SX ranged between 4 and 24 percent and average adhesion force between a SX and lactose particles ranged between 49 and 134 nN. No direct correlation was observed between the RMS Rq of lactose carriers and either the FPF of SX for the interactive mixtures or the adhesion force of a SX on the lactose particles; however, the presence of fine lactose associated with the carrier surface increased the FPF of SX. Dispersion through direct SX detachment from the carrier surface was not consistent with the poor correlations described and was more likely to occur through complex particulate interactions involving fine lactose.

Reproduction of cover illustration of the book "Kinder-Turnen in Haus" by Fritz Strube. Sports

The drawing is modeled after Elizabeth Gottschalk (later Krakauer)

Freddy Gottschalk making a bridge over his sister Ursula Gottschalk in a reproduction of an illustration for the book "Kinder-Turnen in Haus" by Fritz Strube. Sports

Digital Image

Kurt and Hal Gottschalk exercising with a medicine ball in a reproduction of an illustration for the book "Kinder-Turnen in Haus" by Fritz Strube. Sports

Digital Image

Freddy Gottschalk making a bridge over his sister Ursula Gottschalk in a reproduction of an illustration for the book "Kinder-Turnen in Haus" by Fritz Strube. Sports

Digital Image

Kurt and Hal Gottschalk exercising with a medicine ball in a reproduction of an illustration for the book "Kinder-Turnen in Haus" by Fritz Strube. Sports

Digital Image

Effect of water vapour stabilization of raw materials on the quality of the inhalation product

Generation of raw materials for dry powder inhalers by different size reduction methods can be expected to influence physical and chemical properties of the powders. This can cause differences in particle size, size distribution, shape, crystalline properties, surface texture and energy. These physical properties of powders influence the behaviour of particles before and after inhalation. Materials with an amorphous surface have different surface energy compared to materials with crystalline surface. This can affect the adhesion and cohesion of particles. Changes in the surface nature of the drug particles results in a change in product performance. By stabilization of the raw materials the amorphous surfaces are converted into crystalline surfaces. The primary aim of the study was to investigate the influence of the surface properties of the inhalation particles on the quality of the product. The quality of the inhalation product is evaluated by measuring the fine particle dose (FPD). FDP is the total dose of particles with aerodynamic diameters smaller than 5,0 μm. The secondary aim of this study was to achieve the target level of the FPD and the stability of the FPD. This study was also used to evaluate the importance of the stabilization of the inhalation powders. The study included manufacturing and analysing drug substance 200 μg/dose inhalation powder batches using non-stabilized or stabilized raw materials. The inhaler formulation consisted of micronized drug substance, lactose <100μm and micronized lactose <10μm. The inhaler device was Easyhaler®. Stabilization of the raw materials was done in different relative humidity, temperature and time. Surface properties of the raw materials were studied by dynamic vapour sorption, scanning electron microscopy and three-point nitrogen adsorption technique. Particle size was studied by laser diffraction particle size analyzer. Aerodynamic particle size distribution from inhalers was measured by new generation impactor. Stabilization of all three raw materials was successful. A clear difference between nonstabilized and stabilized raw materials was achieved for drug substance and lactose <10μm. However for lactose <100μm the difference wasn’t as clear as wanted. The surface of the non-stabilized drug substance was more irregular and the particles had more roughness on the surface compared to the stabilized drug substances particles surface. The surface of the stabilized drug particles was more regular and smoother than non-stabilized. Even though a good difference between stabilized and non-stabilized raw materials was achieved, a clear evidence of the effect of the surface properties of the inhalation particles on the quality of the product was not observed. Stabilization of the raw materials didn’t lead to a higher FPD. Possible explanations for the unexpected result might be too rough conditions in the stabilization of the drug substance or smaller than wanted difference in the degree of stabilization of the main component of the product <100μm. Despite positive effects on the quality of the product were not seen there appears to be some evidence that stabilized drug substance results in smaller particle size of dry powder inhalers.

Combined inhalation and oral supplementation of Vitamin A and Vitamin D: A possible prevention and therapy for tuberculosis

Tuberculosis is continuing as a problem of mankind. With evolution, MDR and XDR forms of tuberculosis have emerged from drug sensitive strain. MDR and XDR strains are resistant to most of the antibiotics, making the management more difficult. BCG vaccine is not providing complete protection against tuberculosis. Therefore new infections are spreading at a tremendous rate. At the present moment there is experimental evidence to believe that Vitamin A and Vitamin D has anti-mycobacterial property. It is in this context, we have hypothesized a host based approach using the above vitamins that can cause possible prevention and cure of tuberculosis with minimal chance of resistance or toxicity. (C) 2015 Elsevier Ltd. All rights reserved.

Delivery of rSLPI in a liposomal carrier for inhalation provides protection against cathepsin L degradation

Secretory leukocyte protease inhibitor (SLPI) is an endogenous serine protease inhibitor that protects the lungs from excessive tissue damage caused by leukocyte proteases released during inflammation. Recombinant SLPI (rSLPI) has shown potential as a treatment for inflammatory lung conditions. To date, its clinical application has been limited by rapid enzymatic cleavage by cathepsins and rapid clearance from the lungs after inhalation. In this study, rSLPI was encapsulated in 1,2-Dioleoyl-sn-Glycero-3-[Phospho-L-Serine] : Cholesterol (DOPS : Chol) liposomes for inhalation. Incubation of rSLPI with cathepsin L leads to complete loss of activity while encapsulation of rSLPI in DOPS : Chol liposomes retained 92.6 of its activity after challenge with cathepsin L. rSLPI-loaded liposomes were aerosolized efficiently using a standard nebulizer with a minimal loss of activity and stability. This formulation was biocompatible and encapsulation did not appear to diminish access to intracellular sites of action in in vitro cell culture studies. Liposome encapsulation of rSLPI therefore improves stability and potentially reduces the level and frequency of dosing required for therapeutic effect after inhalation.

Tobramycin Inhalation Powder™:a novel drug delivery system for treating chronic Pseudomonas aeruginosa infection in cystic fibrosis

Lung disease in cystic fibrosis (CF) is typified by the development of chronic airways infection culminating in bronchiectasis and progression to end-stage respiratory disease. Pseudomonas aeruginosa, a ubiquitous gram-negative bacteria, is the archetypical CF pathogen and is associated with an accelerated clinical decline. The development and widespread use of chronic suppressive aerosolized antibacterial therapies, in particular Tobramycin Inhalation Solution (TIS), in CF has contributed to reduced lung function decline and improved survival. However, the requirement for the aerosolization of these agents through nebulizers has been associated with increased treatment burden, reduced quality of life and remain a barrier to broader uptake. Tobramycin Inhalation Powder (TIP™) has been developed by Novartis with the express purpose of delivering the same benefits as TIS in a time-effective manner. Administered via the T-326™ (Novartis) Inhaler in four individual 28-mg capsules, TIP can be administered in a quarter of the time of traditional nebulizers and is inherently portable. In clinical studies, TIP has been shown to be safe, result in equivalent or superior reductions in P. aeruginosa sputum density and produce similar improvements in pulmonary function. TIP offers significant advantages in time saving, portability and convenience over traditional nebulized TIS with comparable clinical outcomes for individuals with CF.

Cigarette smokers have exaggerated alveolar barrier disruption in response to lipopolysaccharide inhalation

RATIONALE: Cigarette smoke exposure is associated with an increased risk of the acute respiratory distress syndrome (ARDS); however, the mechanisms underlying this relationship remain largely unknown.

OBJECTIVE: To assess pathways of lung injury and inflammation in smokers and non-smokers with and without lipopolysaccharide (LPS) inhalation using established biomarkers.

METHODS: We measured plasma and bronchoalveolar lavage (BAL) biomarkers of inflammation and lung injury in smokers and non-smokers in two distinct cohorts of healthy volunteers, one unstimulated (n=20) and one undergoing 50 μg LPS inhalation (n=30).

MEASUREMENTS AND MAIN RESULTS: After LPS inhalation, cigarette smokers had increased alveolar-capillary membrane permeability as measured by BAL total protein, compared with non-smokers (median 274 vs 208 μg/mL, p=0.04). Smokers had exaggerated inflammation compared with non-smokers, with increased BAL interleukin-1β (p=0.002), neutrophils (p=0.02), plasma interleukin-8 (p=0.003), and plasma matrix metalloproteinase-8 (p=0.006). Alveolar epithelial injury after LPS was more severe in smokers than non-smokers, with increased plasma (p=0.04) and decreased BAL (p=0.02) surfactant protein D. Finally, smokers had decreased BAL vascular endothelial growth factor (VEGF) (p<0.0001) with increased soluble VEGF receptor-1 (p=0.0001).

CONCLUSIONS: Cigarette smoke exposure may predispose to ARDS through an abnormal response to a 'second hit,' with increased alveolar-capillary membrane permeability, exaggerated inflammation, increased epithelial injury and endothelial dysfunction. LPS inhalation may serve as a useful experimental model for evaluation of the acute pulmonary effects of existing and new tobacco products.