The Impact of Lifestyle and Cardiovascular Risk Factors in Midlife on the Health-Related Quality of Life among Old Men

Prevention of cardiovascular diseases is known to postpone death, but in an aging society it is important to ensure that those who live longer are neither disabled nor suffering an inferior quality of life. It is essential both from the point of view of the aging individual as well as that of society that any individual should enjoy a good physical, mental and social quality of life during these additional years. The studies presented in this thesis investigated the impact of modifiable risk factors, all of which affect cardiovascular health in the long term, on mortality and health-related quality of life (HRQoL). The data is based on the all male cohort of the Helsinki Businessmen Study. This cohort, originally of 3.490 men born between 1919 and 1934 has been followed since the 1960s. The socioeconomic status of the participants is similar, since all the men were working in leading positions. Extensive baseline examinations were conducted among 2.375 of the men in 1974 when their mean age was 48 and at this time the health, medication and cardiovascular risk factors of the participants were observed. In 2000, at the mean age of 73, the HRQoL of the survivors of the original cohort was examined using the RAND-36 mailed questionnaire (n=1.864). RAND-36, along with the equivalent SF-36, is the world s most widely used means of assessing generic health. The response rate was generally over 90%. Mortality was retrieved from national registers in 2000 and 2002. For the six substudies of this thesis, the impact of four different modifiable cardiovascular risk factors (weight gain, cholesterol, alcohol and smoking) on the HRQoL in old age was studied both independently and in combination. The follow-up time for these studies varies from 26 up to 39 years. Mortality is reported separately or included in the RAND-36 scores for HRQoL. Elevated levels of all the risk factors examined among the participants in midlife led to a diminished life expectancy. Among survivors, lower weight gain in midlife was associated with better HRQoL, both physically and mentally. Higher levels of serum cholesterol in middle age indicated both an earlier mortality and a decline in the physical component of HRQoL in a dose-response manner during the 39-year follow-up. Mortality was significantly higher in the highest baseline category of reported mean alcohol consumption (≥ 5 drinks/day), but fairly comparable in abstainers and moderate drinkers during the 29-year follow-up. When HRQoL in old age was accounted for mortality, the men with the highest alcohol consumption in midlife clearly had poorer physical and mental health in old age, but the HRQoL of abstainers and those who drank alcohol in moderation were comparatively similar. The amount of cigarette smoking in midlife was shown to have had a dose-response effect on both mortality and HRQoL in old age during the 26 year follow-up. The men smoking over 20 cigarettes daily in middle age lost about 10 years of their life-expectancy. Meanwhile, the physical functioning of surviving heavy smokers in old age was similar to men 10 years older in the general population. The impact of clustered cardiovascular risk factors was examined by comparing two subcohorts of men who were healthy in 1974, but with different baseline risk factor status. The men with low risk had a 50 % lower mortality during the 29-years follow-up. Their RAND-36 scores for the physical quality of life in old age were significantly better, and the 2002 questionnaire examining psychological well-being indicated also significantly better mental health among the low-risk group. The results indicate that different risk factor levels in midlife have a meaningful impact on life-expectancy and the quality of these extra years. Leading a healthy lifestyle improves both survival and the quality of life.

Dislocation characterization in crystals of potash alum grown by seeded solution growth under conditions of low supersaturation

An analysis has been carried out of the genesis and character of growth dislocations present in all growth sectors of single crystals of potash alum. The crystals, grown from seeded solutions by the temperature lowering method under conditions of low supersaturation, presented the well-developed forms: {111} dominant, {100} and {110}. Growth dislocations formed predominately during refacetting of the edges and corners of the seed, rounded during preparation and insertion into the supersaturated solution. From here they become refracted into the {111} sectors which proved to be the most defective. Smaller numbers of dislocations form at the {111}, {100} and {110} seed interfaces and propagate in these sectors. In crystals of inferior quality, a number of inclusions were found predominantly in the fast growing {100} sectors which become the source of additional dislocations. Dislocations present in the original seed did not propagate across the interface into the developing crystal. Dislocations of all characters were observed. The principal Burgers vectors were found to be left angle bracket100right-pointing angle bracket, left angle bracket110right-pointing angle bracket and left angle bracket111right-pointing angle bracket.

Computing abuse related damages in the case of new entry: An illustration for the Directory Enquiry Services market

A number of European countries, among which the UK and Spain, have opened up their Directory Enquiry Services (DQs, or 118AB) market to competition. We analyse the Spanish case, where both local and foreign firms challenged the incumbent as of April 2003. We argue that the incumbent had the ability to abuse its dominant position, and that it was a perfectly rational strategy. In short,the incumbent raised its rivals' costs directly by providing an inferior quality version of the (essential) input, namely the incumbent's subscribers' database. We illustrate how it is possible to quantify the effect of abuse in situation were the entrant has no previous history in the market. To do this, we use the UK experience to construct the relevant counterfactual, that is the "but for abuse" scenario. After controlling for relative prices and advertising intensity, we find that one of the foreign entrants achieved a Spanish market share of only half of what it would have been in the absence of abuse.

AlGaN layers grown on AlGaN buffer layer and GaN buffer layer using strain-relief interlayers - art. no. 68410S

We investigated AlGaN layers grown by metalorganic chemical vapor deposition (MOCVD) on high temperature (HT-)GaN and AlGaN buffer layers. On GaN buffer layer, there are a lot of surface cracking because of tensile strain in subsequent AlGaN epilayers. On HT-AlGaN buffer layer, not only cracks but also high densities rounded pits present, which is related to the high density of coalescence boundaries in HT-AlGaN growth process.The insertion of interlayer (IL) between AlGaN and the GaN pseudosubstrate can not only avoid cracking by modifying the strain status of the epilayer structure, but also improved Al incorporation efficiency and lead to phase-separation. And we also found the growth temperature of IL is a critical parameter for crystalline quality of subsequent AlGaN epilayer. Low temperature (LT-) A1N IL lead to a inferior quality in subsequent AlGaN epilayers.

Doseamento da Azadiractina e avaliação da atividade antimicrobiana em produtos contendo óleo de Neem

O Neem (Azadirachta indica) é uma árvore indiana conhecida pela atividade pesticida e por várias atividades farmacológicas. De entre os vários compostos já isolados e estudados, a Azadiractina (AZA) foi identificada como o principal composto bioativo desta planta. Este composto apresenta uma grande diversidade de localizações nesta planta, porém assume a sua máxima concentração ao nível das sementes, porção que se apresenta também como a principal fonte de obtenção do óleo de Neem. O óleo apresenta-se como a porção menos estudada do Neem, quer ao nível do seu teor em AZA, quer ao nível das suas propriedades, nomeadamente antimicrobianas. Neste sentido, os objetivos primordiais deste estudo foram o doseamento da Azadiractina e a avaliação da atividade antimicrobiana em produtos contendo óleo de Neem. Um método analítico rápido, sensível e seletivo utilizando HPLC-UV foi desenvolvido para a identificação e quantificação da Azadiractina-A (AZA-A) e 3-tigloylazadirachtol (AZA-B) em diferentes amostras de óleo de Neem. O teor de AZA-A, B e A+B determinado nas amostras de óleo de Neem apresentou valores entre 58,53-843,42 mg/kg, 12,52-800,223 mg/kg e 104,20-1642,17 mg/kg, respetivamente. Na generalidade, os valores obtidos foram inferiores aos descritos na literatura. A partir dos resultados obtidos, verificou-se ainda que o teor destes compostos não é similar em todas as amostras, sendo este condicionado pela qualidade das sementes que deram origem ao óleo e pelo processo extrativo utilizado. Para além disso, foi possível inferir que duas das amostras testadas teriam qualidade inferior, dados os teores reduzidos de AZA que apresentavam. As diferentes amostras de óleo de Neem, bem como formulações comerciais contendo óleo de Neem, foram testadas em 14 microrganismos de forma a avaliar o seu potencial antimicrobiano. Após a análise, verificou-se atividade antimicrobiana de todas as amostras sobre todos os microrganismos testados, observando-se atividade tanto em bactérias Gram+ como Gram-. Os resultados alcançados mostraram que o óleo de Neem e as formulações comerciais contendo óleo de Neem têm um potencial antimicrobiano interessante, principalmente sobre bactérias comuns em patologias da pele. Para além disso, foi possível comprovar que, no caso do óleo de Neem, a AZA não será a principal responsável por esta atividade. Por outro lado, verificou-se que a atividade antimicrobiana das formulações comerciais não se deverá exclusivamente à presença do óleo de Neem, Doseamento da Azadiractina e avaliação da atividade antimicrobiana em produtos contendo óleo de Neem X uma vez que os valores dos halos de inibição obtidos com as formulações tenderam a ser superiores aos verificados apenas com o óleo, além de que os valores de inibição mais elevados foram observados para as formulações contendo menor percentagem de óleo de Neem incorporado. Em suma, os resultados alcançados para os diferentes produtos analisados são promissores e, na sua maioria, convergem com o que está descrito na literatura. No entanto, apesar destes resultados serem um grande contributo, mais estudos são necessários e importantes para conhecer melhor os produtos analisados e assim poder tirar o maior proveito deles.

AVALIAÇÃO DE DUAS METODOLOGIAS DE EXPANSÃO AO FORNO do POLVILHO AZEDO

Duas metodologias de expansão ao forno foram comparadas em 52 amostras de polvilho azedo de três Estados: Santa Catarina, Paraná e Minas Gerais. Os resultados obtidos permitiram visualizar uma proposta de classificação em nível nacional da expansão ao forno do polvilho azedo. No método instrumental foi usado o Farinógrafo Brabender para estabelecer uma massa de consistência padrão de 60UF e no método prático, a consistência semelhante da massa foi determinada de forma empírica. Com a metodologia instrumental obteve-se biscoitos com expansão superior à metodologia prática, mas maior coeficiente de variação, o que pode ser devido a maior sensibilidade do método. Ambas as metodologias poderão ter aplicação, dependendo da finalidade. A metodologia instrumental, pelo custo do equipamento, é mais adequada para laboratórios, desde que se utilize maior número de repetições, para reduzir o coeficiente de variação. Ambas as metodologias ensaiadas permitiram classificar as amostras com o mesmo perfil de desempenho. As amostras provenientes do Estado do Paraná apresentaram as maiores expansões ao forno quando comparados com os outros Estados. Pela metodologia prática a expansão média das amostras do Estado do Paraná foi de 14,1mL/g. As amostras do Estado de Minas Gerais apresentaram as menores expansões ao forno, em média de 13,3mL/g. Foi proposta neste artigo uma classificação para avaliar a qualidade do polvilho azedo, complementando a legislação brasileira que não estabelece este índice para o produto. Quanto à propriedade de expansão ao forno, as amostras avaliadas podem ser divididas em 3 tipos A, B e C. No tipo A (10%) amostras de polvilhos azedo são classificadas como qualidade extra, no tipo B (80%) os polvilhos são de média qualidade e o tipo C (10%) de qualidade inferior. Os resultados obtidos pela metodologia prática permitiram estabelecer como tipo A o polvilho azedo que apresenta um índice de expansão ao forno superior a 16,0mL/g, o tipo B o polvilho com índice de expansão entre 12,0mL/g a 16,0mL/g e o tipo C o polvilho com índice de expansão menor que 12,0mL/g.

Avaliação da qualidade de frutos de café atacados por Ceratitis capitata (Wiedemann, 1824) (Diptera: Tephritidae)

Foram usadas plantas de Coffea arabica L., variedade Catuaí Vermelho, localizadas no Campus da Escola Superior de Agricultura Luiz de Queiroz - USP, Piracicaba,SP, para avaliação dos danos que Ceratitis capitata (Wied., 1824) pode causar aos frutos do cafeeiro. Os resultados mostraram que o ataque de C. capitula não causou queda prematura dos frutos, mas aumentou a queda de cerejas e foram encontradas, fortes evidências, com base na atividade da enzima polifenol oxidase e lixiviação de potássio, que cerejas atacadas podem produzir bebida de café de qualidade inferior.

Produção de pimentão em substratos e fertirrigação com efluente de biodigestor

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Optimization of the surimi production from Mechanically Recovered Fish Meat (MRFM) using response surface methodology

The by-products generated from industrial filleting of tilapia surimi can be used for the manufacture of surimi. The surimi production uses large amounts of water, which generates a wastewater rich in organic compounds (lipids, soluble proteins and blood). Optimizing the number of washing cycles will contribute to a more sustainable production. A mathematical model of mechanically recovered tilapia meat (Oreochromis niloticus) for the processing of surimi (minced fish washing cycles and tapioca starch addition) based on two quality parameters (texture and moisture) was constructed by applying the response surface methodology (RSM). Each factor had an important effect on the moisture and texture of surimi. This study found that the optimal formulation for producing the best surimi using the by-products of tilapia filleting in manufacturing fish burger were the addition of 10% tapioca starch and three minced fish washing cycles. A microstructural evaluation supported the findings of the mathematical model. Practical Applications: The use of mechanically recovered fish meat (MRFM) for the production of surimi enables the utilization of the by-products of filleting fish. However, the inferior quality of the surimi produced from MRFM in relation to that produced with fillets necessitates the addition of starch; secondly, surimi production consumes a large volume of water. RSM provides a valuable means for optimizing the number of washing cycles and starch amounts utilized in fish burger production. Tapioca starch, widely produced in Brazil, has desirable characteristics (surface sheen, smooth texture, neutral taste and clarity in solution) for use in MRFM-produced surimi. © 2013 Wiley Periodicals, Inc.

Elaboração de queijo maturado por mofo obtido de coagulação mista (Lática-Coalho), com leite de cabra congelado e coalhada congelada

Pós-graduação em Medicina Veterinária - FMVZ

Obtenção de constantes elásticas da madeira de duas espécies de Pinus sp

There are many studies about longitudinal modulus of elasticity of wood, but you can´t say the same of transverse modulus, especially for conifers. The study aimed to characterize and compare the species Pinus elliottii var. elliottii and Pinus elliottii var. elliottii x Pinus cariabeae hondurensis (hybrid), and the longitudinal modulus of elasticity (E) and lateral (G) in bending, to analyze the modulus of elasticity in different spaces and to verify the species studied the ideal range is equal to 21 times the height of the specimen, as prescribed in the normative document NBR 7190/1997, as well as analyzing the relationship G = E/20 defined in the normative document NBR 7190/1997. The wood came from the farm located in Paranapanema, split at the mill São José and the rest of the work was conducted at the Experimental Itapeva Campus - UNESP. Were removed fourteen specimens of each species. The average values of the modulus of elasticity and cross were, respectively, 5828 MPa and 452 MPa for Pinus elliottii var. elliottii and 6407 MPa and 320 MPa for the species of Pinus elliottii var. elliottii x Pinus cariabeae hondurensis (hybrid). The trend lines for the plotted graphs showed an exponential behavior to near linear 21he will equal the constant after this value. We have found the relationship G = E/13, for Pinus elliottii var. elliottii and G = E/20 for hybrid. The results of the modulus and strength for Pinus elliottii var. elliottii and the hybrid were lower than those reported in the literature, showing that this batch inferior quality to apply to structures

Cervical soft tissue imaging using a mobile CBCT scanner with a flat panel detector in comparison with corresponding CT and MRI data sets

OBJECTIVE: The aim of this study was to evaluate soft tissue image quality of a mobile cone-beam computed tomography (CBCT) scanner with an integrated flat-panel detector. STUDY DESIGN: Eight fresh human cadavers were used in this study. For evaluation of soft tissue visualization, CBCT data sets and corresponding computed tomography (CT) and magnetic resonance imaging (MRI) data sets were acquired. Evaluation was performed with the help of 10 defined cervical anatomical structures. RESULTS: The statistical analysis of the scoring results of 3 examiners revealed the CBCT images to be of inferior quality regarding the visualization of most of the predefined structures. Visualization without a significant difference was found regarding the demarcation of the vertebral bodies and the pyramidal cartilages, the arteriosclerosis of the carotids (compared with CT), and the laryngeal skeleton (compared with MRI). Regarding arteriosclerosis of the carotids compared with MRI, CBCT proved to be superior. CONCLUSIONS: The integration of a flat-panel detector improves soft tissue visualization using a mobile CBCT scanner.

Aptitud para riego del agua subterránea basada en la salinidad y sodicidad en las perforaciones realizadas entre 2004 y 2010 en los Oasis Norte y Centro de Mendoza

En Mendoza la actividad agrícola se concentra en oasis productivos que dependen exclusivamente del riego, donde aproximadamente un 70% de las propiedades utilizan agua subterránea. El objetivo fue analizar la calidad del agua que extraen las perforaciones realizadas durante el periodo 2004/2010, en los oasis Norte y Centro de Mendoza. De los aproximadamente 1000 registros de nuevos pozos se han tomado muestras de 409 perforaciones, en las que se realizaron análisis físicoquímicos: conductividad eléctrica actual (CEA) y efectiva (CEE), residuo salino, sales totales, pH, cationes y aniones, se obtuvo el coeficiente de álcali, relación de absorción de sodio y las durezas. Se clasificó según Riverside modificación Thorne-Peterson y siguiendo la clasificación regional de Wainstein. Las perforaciones del Oasis Centro son en general de menor profundidad, extrayendo agua de menor CEA y mayor calidad. En el Oasis Norte las mejores aguas están en la zona irrigada por el Río Mendoza, encontrando hacia el este (Río Tunuyán) aguas de peores características, a pesar de que en dicha zona es donde se ubican las más importantes profundidades de exploración. Las mayores diferencias entre CEA y CEE están en la cuenca del Tunuyán inferior, donde las aguas poseen más cantidad de sales de mediana solubilidad.

El plan estratégico Argentina Apícola 2017 y su influencia en el sector apícola de la localidad de Tandil

By means of this paper is to critically analyze the current situation of beekeeping in the town of Tandil (Buenos Aires), from the objectives set out in the Strategic Plan Argentina Beekeeping 2017, approved in 2008, whose goal is aimed at that country from becoming a global market leader of value-added bee products, ensuring sustainable development in economic, environmental and social. At first briefly reviews the national bee scene, in which Argentina is known for being the third largest producer of honey, after China and the U.S., while competing with China for the first world exporter, a situation that contrasts with low domestic consumption. Then describes the strategic objectives that promotes the Plan, including: marketing, production, promotion and added value. Then we analyze the main characteristics of the honey industry in the area chosen, the town of Tandil, where the stage is characterized by a large number of small producers who are mostly engaged in the informal sale of honey for direct consumption but whose demand is low, compared to a small number of collectors, packers and exporters that dominate the international market. In general it is observed that, with few exceptions, the honey is exported in bulk, as a commodity, and its main use molasses to improve lower quality of recipient countries. Meanwhile the honey for local consumption, is usually of inferior quality because they generally are not subject to quality controls required by the circuit of export. To overcome the limitations of beekeeping above, highlights the collaborative efforts of government agencies such as the National Institute of Agricultural Technology (INTA) and the Faculty of Veterinary Science, National University Centre of the Province of Buenos Aires. As a preliminary conclusion, it is argued that the Strategic Plan Argentina Beekeeping is still valid as a tool for development of the sector, and is also essential to encourage the development of competitive products in terms of quality and differentiation, through the development of technology and knowledge sharing to ensure growth and sustainability of beekeeping in the town of Tandil

El plan estratégico Argentina Apícola 2017 y su influencia en el sector apícola de la localidad de Tandil

By means of this paper is to critically analyze the current situation of beekeeping in the town of Tandil (Buenos Aires), from the objectives set out in the Strategic Plan Argentina Beekeeping 2017, approved in 2008, whose goal is aimed at that country from becoming a global market leader of value-added bee products, ensuring sustainable development in economic, environmental and social. At first briefly reviews the national bee scene, in which Argentina is known for being the third largest producer of honey, after China and the U.S., while competing with China for the first world exporter, a situation that contrasts with low domestic consumption. Then describes the strategic objectives that promotes the Plan, including: marketing, production, promotion and added value. Then we analyze the main characteristics of the honey industry in the area chosen, the town of Tandil, where the stage is characterized by a large number of small producers who are mostly engaged in the informal sale of honey for direct consumption but whose demand is low, compared to a small number of collectors, packers and exporters that dominate the international market. In general it is observed that, with few exceptions, the honey is exported in bulk, as a commodity, and its main use molasses to improve lower quality of recipient countries. Meanwhile the honey for local consumption, is usually of inferior quality because they generally are not subject to quality controls required by the circuit of export. To overcome the limitations of beekeeping above, highlights the collaborative efforts of government agencies such as the National Institute of Agricultural Technology (INTA) and the Faculty of Veterinary Science, National University Centre of the Province of Buenos Aires. As a preliminary conclusion, it is argued that the Strategic Plan Argentina Beekeeping is still valid as a tool for development of the sector, and is also essential to encourage the development of competitive products in terms of quality and differentiation, through the development of technology and knowledge sharing to ensure growth and sustainability of beekeeping in the town of Tandil