Behavioral and neurological effects of methyl chloride : behavioral and neurological evaluation of workers exposed to industrial solvents : methyl chloride /

"Contract no. CDC 99-74-20."

Efficient P(3HB) extraction from Burkholderia sacchari cells using non-chlorinated solvents

© 2015. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/

Bio-ethanol valorization towards C4s including 1-butanol over metal modified alumina and zeolite catalysts

Bio-ethanol has been used as a fuel additive in modern society aimed at reducing CO2-emissions and dependence on oil. However, ethanol is unsuitable as fuel supplement in higher proportions due to its physico-chemical properties. One option to counteract the negative effects is to upgrade ethanol in a continuous fixed bed reactor to more valuable C4 products such as 1-butanol providing chemical similarity with traditional gasoline components. Bio-ethanol based valorization products also have other end-uses than just fuel additives. E.g. 1-butanol and ethyl acetate are well characterised industrial solvents and platform chemicals providing greener alternatives. The modern approach is to apply heterogeneous catalysts in the investigated reactions. The research was concentrated on aluminium oxide (Al2O3) and zeolites that were used as catalysts and catalyst supports. The metals supported (Cu, Ni, Co) gave very different product profiles and, thus, a profound view of different catalyst preparation methods and characterisation techniques was necessary. Additionally, acidity and basicity of the catalyst surface have an important role in determining the product profile. It was observed that ordinary determination of acid strength was not enough to explain all the phenomena e.g. the reaction mechanism. One of the main findings of the thesis is based on the catalytically active site which originates from crystallite structure. As a consequence, the overall evaluation of different by-products and intermediates was carried out by combining the information. Further kinetic analysis was carried out on metal (Cu, Ni, Co) supported self-prepared alumina catalysts. The thesis gives information for further catalyst developments aimed to scale-up towards industrially feasible operations.

Étude de l’impact de la charge de travail sur les indicateurs biologiques d’exposition de l’acétone et du styrène par la modélisation toxicocinétique

L’effort physique a été reconnu comme l’un des déterminants majeurs qui affecte l’absorption pulmonaire et la cinétique des solvants industriels, composés volatils très répandus dans le milieu de travail. L’objectif global de ce projet était de caractériser la relation entre divers niveaux de charge de travail et les concentrations biologiques de l’acétone et du styrène ou de ses métabolites utilisés comme des indicateurs biologiques de l’exposition (IBEs) à ces solvants. Des modèles pharmacocinétiques à base physiologique ont été développés et validés afin de reproduire une exposition professionnelle à l’acétone et au styrène, individuellement et en combinaison, durant une semaine complète de travail (8h/jour, 5 jours). Les simulations ont été effectuées suivant une exposition aux valeurs limite d’exposition (500 ppm et 20 ppm, respectivement) et à des charges de travail de 12,5 W (repos), 25 W et 50 W. Les valeurs prédites par les modèles ont été comparées aux valeurs de référence des IBEs actuels. Le niveau d’acétone dans l’urine obtenu à la fin du dernier quart de travail était 3,5 fois supérieur à la valeur au repos (28 mg/L) pour un effort de 50 W, tandis que les niveaux de styrène dans le sang veineux et de ses métabolites dans l’urine ont augmenté d’un facteur d’environ 3,0 en comparaison avec les valeurs au repos, respectivement de 0,17 mg/L et 144 mg/g créatinine. Pour une co-exposition à des concentrations de 20 ppm de styrène et 200 ppm d’acétone et à une activité physique de 50 W, les simulations ont montré une augmentation de 10% du styrène sanguin et une faible diminution de ses métabolites dans l’urine. Les valeurs simulées par les modèles pour l’acétone ou le styrène montrent que des travailleurs dont la charge de travail équivaut à plus de 25 W sont susceptibles d’avoir des concentrations internes pouvant dépasser les valeurs de référence des IBEs respectifs de ces solvants et peuvent être à risque. Les résultats soulignent ainsi l’importance de tenir compte de la charge de travail dans la détermination d’une valeur de référence pour la surveillance biologique de l’acétone et du styrène.

Water quality and ecology of the River Lee: mass balance and a review of temporal and spatial data

A regional overview of the water quality and ecology of the River Lee catchment is presented. Specifically, data describing the chemical, microbiological and macrobiological water quality and fisheries communities have been analysed, based on a division into river, sewage treatment works, fish-farm, lake and industrial samples. Nutrient enrichment and the highest concentrations of metals and micro-organics were found in the urbanised, lower reaches of the Lee and in the Lee Navigation. Average annual concentrations of metals were generally within environmental quality standards although, oil many occasions, concentrations of cadmium, copper, lead, mercury and zinc were in excess of the standards. Various organic substances (used as herbicides, fungicides, insecticides, chlorination by-products and industrial solvents) were widely detected in the Lee system. Concentrations of ten micro-organic substances were observed in excess of their environmental quality standards, though not in terms of annual averages. Sewage treatment works were the principal point source input of nutrients. metals and micro-organic determinands to the catchment. Diffuse nitrogen sources contributed approximately 60% and 27% of the in-stream load in the upper and lower Lee respectively, whereas approximately 60% and 20% of the in-stream phosphorus load was derived from diffuse sources in the upper and lower Lee. For metals, the most significant source was the urban runoff from North London. In reaches less affected by effluent discharges, diffuse runoff from urban and agricultural areas dominated trends. Flig-h microbiological content, observed in the River Lee particularly in urbanised reaches, was far in excess of the EC Bathing Water Directive standards. Water quality issues and degraded habitat in the lower reaches of the Lee have led to impoverished aquatic fauna but, within the mid-catchment reaches and upper agricultural tributaries, less nutrient enrichment and channel alteration has permitted more diverse aquatic fauna.

TOXIC EFFECTS OF WATER EUTROPHICATION ON PANCREATIC, HEPATIC AND OSTEOGENIC TISSUES OF RATS

Pollution, industrial solvents, concentrations of metals and other environmental agents are widely related to biochemicals values which are used in disease diagnosis of environmental toxicity. A rat bioassay validated for the identification of toxic effects of eutrophication revealed increased serum activities of amylase, alanine transaminase (BLT) and alkaline phosphatase (ALP) in rats that received algae, filtered water and nickel or cadmium from drinking water. Serum Cu-Zn superoxide dismutase activity decreased from its basal level of 40.8 +/- 2.3 to 26.4 U/mg protein, at 7 days of algae and at 48 hr of nickel and cadmium water ingestion. The observation that lipoperoxide concentration was not altered in rats treated with filtered water, while amylase, ALT and ALP were increased in these rats and in those treated with nickel or cadmium, indicated that pancreatic, hepatic and osteogenic lesions by eutrophication were not related to superoxide radicals, and might be due to a novel toxic environmental agent found in filtered and non-filtered algae water.

Evaluación de la producción de pintura a partir de los residuos de Poliestireno expandido utilizando un solvente amigable con el ambiente

Con la evaluación de la producción de pintura a partir de los residuos de poliestireno expandido (EPS) utilizando un solvente amigable con el ambiente, se pretende dar uso post industrial a los desechos de poliestireno expandido que cada vez se acumulan más en los rellenos sanitarios, lo que genera un descontento debido a su volumen -- Además de darle un trato más amigable a la fabricación de pintura buscando un solvente que no resulte tan tóxico para el trato humano y para el ambiente -- El desarrollo del proyecto se lleva a cabo planteando una metodología de investigación que sugiere inicialmente pruebas de caracterización al residuo de poliestireno expandido, que permiten saber características propias del material -- Luego de esto, se realiza un diseño de experimentos multifactorial con dos factores y tres niveles, donde se analiza el efecto de la temperatura en la fase de mezclado y la relación que tiene la concentración de poliestireno expandido como vehículo en la elaboración de pintura -- En el diseño se evalúan cuatro variables de respuesta: adhesión, viscosidad, tiempo de secado y poder de cubrimiento, comparando luego estas mismas propiedades con las realizadas en una pintura comercial -- El estudio muestra un alto grado de influencia de la concentración de poliestireno expandido sobre las propiedades de la pintura obtenida, mejorando cada una de ellas a medida que se aumenta la cantidad de poliestireno expandido -- Se observó también que la temperatura influyó en el tiempo de secado, es decir a mayor temperatura en la fase de mezclado mayor fue el tiempo que se demoró la pintura en secar -- Por último, al comparar el producto obtenido con uno comercial, se encuentra que el producto obtenido tiene menor tiempo de secado, una adhesión similar, posee mayor poder de cobertura y una viscosidad más alta, además de ser una pintura no toxica y amigable con el ambiente

Continuous catalyst free production of biodiesel from agro industrial waste with green solvents

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Fundamental studies on natural deep eutectic solvents: physico-chemical, thermal and rheological properties

When combined at particular molar fractions, sugars, aminoacids or organic acids a present a high melting point depression, becoming liquids at room temperature. These are called Natural Deep Eutectic Solvents – NADES and are envisaged to play a major role on the chemical engineering processes of the future. Nonetheless, there is a significant lack of knowledge of its fundamental and basic properties, which is hindering their industrial applications. For this reason it is important to extend the knowledge on these systems, boosting their application development [1]. In this work, we have developed and characterized NADES based on choline chloride, organic acids, amino acids and sugars. Their density, thermal behavior, conductivity and polarity were assessed for different compositions. The conductivity was measured from 0 to 40 °C and the temperature effect was well described by the Vogel-Fulcher-Tammann equation. The morphological characterization of the crystallizable materials was done by polarized optical microscopy that provided also evidence of homogeneity/phase separation. Additionally, the rheological and thermodynamic properties of the NADES and the effect of water content were also studied. The results show these systems have Newtonian behavior and present significant viscosity decrease with temperature and water content, due to increase on the molecular mobility. The anhydrous systems present viscosities that range from higher than 1000Pa.s at 20°C to less than 1Pa.s at 70°C. DSC characterization confirms that for water content as high as 1:1:1 molar ratio, the mixture retains its single phase behavior. The results obtained demonstrate that the NADES properties can be finely tunned by careful selection of its constituents. NADES present the necessary properties for use as extraction solvents. They can be prepared from inexpensive raw materials and tailored for the selective extraction of target molecules. The data produced in this work is hereafter importance for the selection of the most promising candidates avoiding a time consuming and expensive trial and error phase providing also data for the development of models able to predict their properties and the mechanisms that allow the formation of the deep eutectic mixtures.

Evaluation of work-related volatile organic compounds (VOCs) exposition in automotive painting cabins industrial cleanings

Automotive painting cabins are cleaned with several solvents, being great part of them mixtures of volatile organic compounds (VOCs), where the three xylene isomers are the most important constituents. To evaluate the work-related exposition of the cleaners that use these mixtures of solvents, xylenes have been determined in the working ambient air as well as its metabolite, o-m-p-methyl hippuric acid, has been analysed in urine to establish the dermal and respiratory exposition. This evaluation has been done in order to assess the occupational exposure to VOCs and to know the working conditions of the cleaners, but also to evaluate the effectiveness of personal protective equipment (PPE), the engineering control and the work practices.The xylenes have been chosen as indicators of exposition because they are the main components in the cleaning solvents used, with a level of concentration between 50% and 85%.The Xylenes have an occupational exposure limit (8 h TWA) of 50 ppm (221 mg/m3) and a short-term exposure limit (STEL) of 100 ppm (442 mg/m3). On the other hand, the biological exposure index (BEI) for xylenes is the sum of the total methyl hippuric acids in urine at the end of the work-shift, being the value 1500 mg/g creatinine.

Use of Reagent Grade Versus Industrial Grade Trichlorethylene in Asphalt Recoveries, MLR-83-05, 1983

This is a continuation of a project initiated a year ago to determine any differences in test results on recovered asphalt cements caused by the use of industrial grade of solvent as compared with the reagent grade. AASHTO specifies the use of reagent grade of trichlorethylene, but the Laboratory uses industrial grade which costs much less. Last year this objective of the project was aborted when it was found that a larger difference in test results was obtained between the two distillation apparatuses than between the two solvents, Then all efforts were directed toward obtaining uniformity in test results between the apparatuses under the east hood as compared with that under the west hood. Considerable progress was made toward this end. (See report under this same title dated April 1982). The objective this year was to again evaluate the results when using both variables (apparatuses and solvents). Another objective developed later in this investigation; this was to determine any differences in test results on recovered asphalt cements caused by the use of reclaimed trichlorethylene (from the distillation process) as compared with the use of industrial grade of solvent. At the present time the reclaimed trichlorethylene is discarded. If the reclaimed solvent could be used for further recoveries, a considerable savings in solvent costs would result.

Optimization of the extraction process of polyphenols from cashew apple agro-industrial residues

The goal of this study was to determine the chemical composition of cashew apples agro-industrial residue and optimize the process of polyphenols extraction in this residue. The extraction process conditions were defined using a 24-1 fractional factorial experimental design using acetone and methanol as solvents. The independent variables were: time (30 to 90 min), temperature (30 to 50 °C), solvent concentrations (50% to 90%), agitation speed (100 to 300 rpm); the dependent variables were: total phenolic content and DPPH scavenging capacity. The optimized process was carried out by applying the Central Composite Rotational Design (CCRD) considering the results obtained with the 24-1 fractional factorial experimental design. The residue presented bioactive compounds in its composition, with emphasis on the content of total phenolic compounds (1975.64 mg/ 100 g). The extraction process was not affected by methanol; however, acetone affected the amounts of extracted phytochemicals. Extracts with high levels of polyphenols and strong DPPH scavenging capacity (> 80%) were obtained using 55% acetone, 30 minutes, 30 °C, and 150 rpm. The results showed that cashew apple residue is a potential natural source of bioactive compounds with strong antioxidant capacity. These compounds could be used partially or totally to replace synthetic antioxidants.