Decomposition analysis of air pollution abatement in China: empirical study for ten industrial sectors from 1998 to 2009

This study analyzes the management of air pollutant substance in Chinese industrial sectors from 1998 to 2009. Decomposition analysis applying the logarithmic mean divisia index is used to analyze changes in emissions of air pollutants with a focus on the following five factors: coal pollution intensity (CPI), end-of-pipe treatment (EOP), the energy mix (EM), productive efficiency change (EFF), and production scale changes (PSC). Three pollutants are the main focus of this study: sulfur dioxide (SO2), dust, and soot. The novelty of this paper is focusing on the impact of the elimination policy on air pollution management in China by type of industry using the scale merit effect for pollution abatement technology change. First, the increase in SO2 emissions from Chinese industrial sectors because of the increase in the production scale is demonstrated. However, the EOP equipment that induced this change and improvements in energy efficiency has prevented an increase in SO2 emissions that is commensurate with the increase in production. Second, soot emissions were successfully reduced and controlled in all industries except the steel industry between 1998 and 2009, even though the production scale expanded for these industries. This reduction was achieved through improvements in EOP technology and in energy efficiency. Dust emissions decreased by nearly 65% between 1998 and 2009 in the Chinese industrial sectors. This successful reduction in emissions was achieved by implementing EOP technology and pollution prevention activities during the production processes, especially in the cement industry. Finally, pollution prevention in the cement industry is shown to result from production technology development rather than scale merit. © 2013 Elsevier Ltd. All rights reserved.

Wastewater pollution abatement in China: A comparative study of fifteen industrial sectors from 1998 to 2010

This study analyzes the management of wastewater pollutants in a number of Chinese industrial sectors from 1998 to 2010. We use decomposition analysis to calculate changes in wastewater pollutant emissions that result from cleaner production processes, end-of-pipe treatment, structural changes in industry, and changes in the scale of production. We focus on one indicator of water quality and three pollutants: chemical oxygen demand (COD), petroleum, cyanide, and volatile phenols. We find that until 2002, COD emissions were mainly reduced through end-of-pipe treatments. Cleaner production processes didn’t begin contributing to COD emissions reductions until the introduction of a 2003 law that enforced their implementation. Petroleum emissions were primarily lowered through cleaner production mechanisms, which have the added benefit of reducing the input cost of intermediate petroleum. Diverse and effective pollution abatement strategies for cyanide and volatile phenols are emerging among industries in China. It will be important for the government to consider differences between industries should they choose to regulate the emissions of specific chemical substances.

The rate of return on equity across industrial sectors on the British stock market, 1825-70

This article assesses the contribution of the various industrial sectors to the growth of the British equity market in the 1825–70 period. It also provides estimates of the rates of return on these industrial sectors in this period. The article then proceeds to examine whether differences in rates of return across the various sectors can be explained by risk or other financial factors. One of the main findings is that the relatively high rates of return in the banking, insurance, and miscellaneous sectors appear to be in some measure explained by the presence of extended liability and uncalled capital.

Competitiveness of the manufacturing and agro-industrial sectors in the Caribbean with a focus on Dominica, Guyana, Saint Vincent and the Grenadines and Trinidad and Tobago

Includes bibliography

A first approach to the impact of the real exchange rate on industrial sectors in Colombia

Much has been said about possible symptoms of Dutch disease in Colombia in the wake of a marked upsurge in commodity prices and the significant real appreciation of the national currency. This paper examines whether the real effective exchange rate had an impact on industry during the period 2000-2010. Specifically, it evaluates the effect of the appreciation of the real exchange rate on the value added of 63 industrial sectors in Colombia using the Arellano and Bond (1991) generalized method of moments (gmm) estimator. Overall, our results confirm a negative relationship between real exchange rate appreciation and industry. The analysis showed that real exchange rate appreciation had a significant impact on the value added of 21 sectors: a negative effect for 18 sectors and a positive effect for 3 sectors.

Efficiency in Brazil's industrial sectors in terms of energy and sustainable development

This article evaluates the efficiency of Brazil's industrial sectors from 1996 to 2009, taking into account energy consumption and respective contributions to the country's economic and social aspects. This analysis used a mathematical programming method called Data Envelopment Analysis (DEA), which enabled, from the SBM model and the window analysis, to evaluate the ability of industries to reduce energy consumption and fossil-fuel CO2 emissions (inputs), as well as to increase the Gross Domestic Product (GDP) by sectors, the persons employed and personnel expenses (outputs). The results of this study indicated that the Textile sector is the most efficient industrial sector in Brazil, according to the variables used, followed by these sectors: Foods and Beverages, Chemical, Mining, Paper and Pulp, Nonmetallic and Metallurgical.

Input-output-based genuine value added and genuine productivity in China's industrial sectors (1995-2010)

The rapid growth of China's economy has brought about huge losses of natural capital in the form of natural resource depletion and damages from carbon emissions. This paper recalculates value added, capital formation, capital stock, and related multifactor productivity in China's industrial sectors by further developing the genuine savings method of the World Bank. The sector-level natural capital loss was calculated using China's official input–output table and their extensions for tracing final consumers. The capital output elasticity in the productivity estimation was adjusted based on these tables. The results show that although the loss of natural capital in China's industrial sectors in terms of value added has slowed, the impacts on their productivity during the past decades is still quite clear.

International tourism : can it contribute to Nigeria's economic growth as other industrial sectors?

The growth of international tourism and the attendant economic benefits to the world nations, has been phenominal since the end of the second world war. It is considered that the industry's upsurge will continue even in the phase of various constraints exemplified in high fuel cost, constant increase in fares and the threatening world-wide recessions. Developed as well as developing countries have gained substantially from the industry. A recent development shows increasing tourist traffic towards developing countries, while developed countries still hold their fort in stable growth of tourist receipts. The strategic beneficial effects of international tourist industry are often quantified in terms of foreign exchange earnings, employments offered, and the Real Estate super-structures; but in general,the industry has innumerable direct and indirect benefits to any nation engaging in the trade. The objective of this thesis is to demonstrate by comparative analysis and proven parameters that the international tourist industry which is given low priority in development in Nigeria, can equally contribute to the nation's economic growth as other industrial sectors which receive high priority and patronage in development. The data for this paper are gathered from primary sources which are i) responses by the Federal and State Governments' tourism-related offices; ii) government publications e.a. the Third National Development Plan of Federal Republic of Nigeria; and iii) Books and collections. The secondary sources include reports,periodicals and hospitality industry publications. To formally establish the international tourist industry in Nigeria, all the governments (Federal, State and Local) and the private sector in the country, should commence the development of the industry with research and feasibility studies, to be followed by proper planning at all levels and based on the result of the research and feasibility studies.

Productive inefficiency analysis and toxic chemical substances in US and Japanese manufacturing sectors

Corporate social responsibility is imperative for manufacturing companies to achieve sustainable development. Under a strong environmental information disclosure system, polluting companies are disadvantaged in terms of market competitiveness, because they lack an environmentally friendly image. The objective of this study is to analyze productive inefficiency change in relation to toxic chemical substance emissions for the United States and Japan and their corresponding policies. We apply the weighted Russell directional distance model to measure companies productive inefficiency, which represents their production technology. The data encompass 330 US manufacturing firms observed from 1999 to 2007, and 466 Japanese manufacturing firms observed from 2001 to 2008. The article focuses on nine high-pollution industries (rubber and plastics; chemicals and allied products; paper and pulp; steel and non-ferrous metal; fabricated metal; industrial machinery; electrical products; transportation equipment; precision instruments) categorized into two industry groups: basic materials industries and processing and assembly industries. The results show that productive inefficiency decreased in all industrial sectors in the United States and Japan from 2001 to 2007. In particular, that of the electrical products industry decreased rapidly after 2002 for both countries, possibly because of the enforcement of strict environmental regulations for electrical products exported to European markets.

Water use and wastewater discharge of industrial sector in China

Problem of water scarcity has been increasingly severe in China. Though industrial sectors play important role for the rapid economic growth, and they consumes water and discharge wastewater. The purpose of this study is to examine the efficiency of water use and wastewater discharge in comparison with those of other inputs and production output in Chinese industry. Measuring efficiency of each input and output factor from 2002 to 2008, we find the average inefficiencies of industrial water use and industrial wastewater discharge are higher than those of capital, labor, and production output in China. In addition, the productivity levels to save water in the water shortage areas are not higher compared to the others. The water use inefficiency has a high dispersion especially in the regions where the amounts of water resources per capita is less than 3000 cubic meter.

Optimal production resource reallocation for CO2 emissions reduction in manufacturing sectors

To mitigate the effects of climate change, countries worldwide are advancing technologies to reduce greenhouse gas emissions. This paper proposes and measures optimal production resource reallocation using data envelopment analysis. This research attempts to clarify the effect of optimal production resource reallocation on CO2 emissions reduction, focusing on regional and industrial characteristics. We use finance, energy, and CO2 emissions data from 13 industrial sectors in 39 countries from 1995 to 2009. The resulting emissions reduction potential is 2.54 Gt-CO2 in the year 2009, with former communist countries having the largest potential to reduce CO2 emissions in the manufacturing sectors. In particular, basic material industry including chemical and steel sectors has a lot of potential to reduce CO2 emissions.