Arquitectura industrial tabacalera en la España peninsular: secaderos y fábricas

La Arquitectura industrial del tabaco en España está representada por dos tipos de construcciones, que corresponden a las dos fases en las que se divide el proceso de producción del tabaco: los secaderos (arquitectura bioclimática donde se realiza el secado), y las fábricas (centros donde se elabora el tabaco procedente de los secaderos). Las fábricas se repartieron por todo el territorio español, ocupando preferiblemente los lugares costeros, aunque existen casos en los que su localización obedecía a razones políticas. Estos edificios, en su mayoría, incluidos en los centros históricos de las ciudades, han cambiando de uso, y las antiguas fábricas de tabaco se han transformado en su mayoría, en centros de cultura, o centros sociales y representativos. La tesis surge del análisis de las características constructivas de la arquitectura industrial del tabaco: de los secaderos y de las fábricas, por tratarse de una tipología con suficiente entidad y un ejemplo de arquitectura bioclimática de producción en el caso de los secaderos, y por conseguir haberse adaptado a otros usos en el caso de las fábricas. La arquitectura de producción emplea un lenguaje acorde con los avances de la industrialización, anticipando materiales y estructuras, y condensando en una tipología específica las complejas relaciones establecidas entre producto, hombres y espacio. Estos edificios tuvieron una extensa implantación en el territorio, y se caracterizan por una serie de valores tecnológicos, arquitectónicos, sociológicos y paisajísticos, que hacen de ellos un documento de primera magnitud para conocer: la evolución e implantación de las técnicas constructivas (materiales y estructuras), los procesos de innovación tipológica y la estructura económica y procedimientos técnicos utilizados. El territorio en el que se insertan constituye su contexto territorial, por lo que no sería adecuado considerar estos edificios como elementos aislados, sin analizar la relación con el entorno en el que se generaron. Por este motivo, se analizan las condiciones higrotérmicas ambientales de los secaderos para compararlas con las de confort humano y establecer relaciones y parámetros compatibles. Los ejemplos analizados de secaderos son todos de fábrica. El uso del ladrillo como módulo principal para la elaboración de un edificio, supone la consideración de un “grado cero” de todo el aparato constructivo y compositivo de la arquitectura. Dejar el ladrillo visto, supone hacer explícitos todos los procesos acumulativos. Este elemento mínimo, permite unas posibilidades enormemente abiertas, pero no absolutamente aleatorias, que definen su propia lógica combinatoria. La exigencia de sinceridad, característica de la arquitectura industrial, en la exposición de los materiales, exhibiéndolos en su propia naturaleza y en el modo real de ser utilizados, se hace patente en este tipo de construcción. Se realiza un estudio de permeabilidad en las fachadas de los secaderos, para determinar el grado de ventilación y su relación con la orientación, el patrón de celosía empleado y el volumen total. Este sistema de acondicionamiento climático específico, puede servir de recurso a otras construcciones, por lo que se podría trasladar el sistema constructivo y formal de los secaderos a otros usos, desde una doble vertiente: Arquitectura para la adaptación climática al entorno. Arquitectura como generadora de condiciones climáticas específicas, en el interior. La utilidad de los secaderos es fundamentalmente: proporcionar sombra, ventilación y un espacio cubierto, pero permeable en sus fachadas. La arquitectura industrial debe ser reconocida dentro del conjunto patrimonial, debido a sus características propias que permiten su diferenciación del resto de la arquitectura. Conocer la estructura productiva permite analizar correctamente estas construcciones, ya que el programa inicial es básico para entender la organización del espacio interior. Las fábricas no se situaron cerca de las zonas de producción del tabaco, excepto en dos casos: Cádiz y Palazuelo, en los que existen secaderos y campos de cultivo de hoja de tabaco en las áreas cercanas. La principal causa de esta separación es que el proceso de obtención de tabaco es un proceso dividido en dos fases principales: proceso primario y proceso secundario. En el proceso primario la hoja de tabaco se seca en los secaderos, en los que es determinante el clima, pero únicamente en el caso del secado del tabaco al aire. En el proceso secundario sin embargo, el tabaco llega previamente tratado a las fábricas, por lo que no influye el clima en esta parte del proceso. Esta razón determina que en las áreas climáticas donde se centra el estudio, haya zonas en las que existen fábrica y secaderos y otras en las que únicamente existe fábrica, o sólo secaderos. La localización de las fábricas atendía a razones de muy diferente índole, las más importantes fueron: geográficas, estratégicas, y políticas. En la mayoría de las fábricas la elección de la ciudad de emplazamiento estaba ligada a la recepción de la materia prima, que principalmente se hacía por vía marítima, o acuática (el caso de Sevilla), y por vía terrestre, utilizando como medio de transporte el ferrocarril. Sólo dos casos, de las antiguas fábricas, corresponden a razones políticas, son las dos únicas que no están en la costa: Madrid y Logroño. La de Madrid se construyó por centralidad política, y porque geográficamente ocupaba el punto central de todas las comunicaciones terrestres por carretera y ferrocarril. Muchas de las fábricas se situaron cercanas a las estaciones de ferrocarril. La de Logroño atendió, sin embargo, a razones políticas. Para finalizar, se realiza un estudio comparativo de las fábricas de Sevilla, Madrid y San Sebastián. Las razones que justifican esta elección son: - La de Sevilla fue históricamente la primera fábrica y la más importante. - La de Madrid fue la más importante a nivel administrativo, la sede de Tabacalera se instaló en la capital, y después de la de Sevilla, fue la que sirvió de modelo al resto de las fábricas. - La de San Sebastián era la más grande del Norte. Los análisis que se han realizado son de: volumen y superficies de patios, superficies de cubierta, permeabilidad o huecos en fachadas, orientación y soleamiento de patios, distribución espacial interior y organización, y evolución de usos. Podemos observar que en la mayoría de estas fábricas ha habido una transformación en el uso, pasando de ser edificios industriales a edificios culturales. Estas construcciones se pueden considerar como infraestructuras adaptables, por ser útiles, sostenibles y funcionales. ABSTRACT The Spanish industrial architecture of tobacco is represented by two construction types that correspond to the two phases of tobacco production: the drying sheds (bioclimatic constructions where the drying process takes place) and factories (centres where tobacco is processed after the drying process). The factories were distributed throughout the Spanish territory, preferably occupying coastal locations, although some of them were located elsewhere following political reasons. Most of the buildings inside city centres have suffered changes in their use, becoming cultural, social or representative centres. This thesis attempts the analysis of the constructive systems employed in tobacco industrial architecture, from drying sheds to factories. The drying sheds are an example of bioclimatic industrial architecture. The factories are a typology that have successfully adapted to new uses. Industrial architecture uses a language that follows the advances in industrialization, anticipating new materials and structures, and merging the complex relationships established among products, human beings, space and locations. These buildings were promoted extensively in the country. They are characterized by technological architectural sociological and landscaping innovations. They are considered as important examples of the evolution and the implementation of construction techniques (building materials and structures). They are also considered as examples of innovation in the building typology, in their economic structure and in the technologies that they have applied. The settings in which the drying sheds are placed have an important influence in them. They cannot be considered as isolated elements. Instead, there is a close relationship between drying sheds and the surroundings in which they are located. Drying sheds’ hygrotermal and environmental conditions are analyzed in this thesis to compare them with the values of human comfort and find suitable relationships and parameters. All the drying sheds that have been analyzed are constructed with brick. This implies a consideration of “zero degree” for both the construction and the composition of the architectural process. The detailing - entails making all the accumulative processes explicit as the brick walls are left exposed. This minimal component allows a wide range of options that are never random but based on the logic of the way in which it is combined. The “sincerity” in the exposition of material, displaying them in their very nature and showing how they are really used, is a basic characteristic of industrial architecture, and it is even more expressive in these types of buildings. The walls of the drying sheds undergo a permeability assessment in order to determine the degree of ventilation and orientation, the lattice pattern used and the overall volume. This specific conditioning system can serve as a resource for other buildings, and consequently, it could be transferred to other uses within a two-pronged approach: -Climatically adapted architecture that takes into account the surroundings. -Architecture as a generator of specific climatic conditions indoors. Drying sheds’ main purposes / aims deal with how to provide shade, ventilation and a covered space as well as permeability. The industrial architecture must be recognized as historical valuable buildings due to its intrinsic and distinctive characteristics. Knowing the productive structure, allow us to make a proper analysis of these buildings, since the basic aim, is to understand the spatial organization indoors. Factories did not come close to the tobacco production, with the exception of Cádiz and Palazuelo, where there are sheds and tobacco croplands nearby. The main reason for this separation is that the process of obtaining tobacco has two processes: the primary process and the secondary process. In the primary process tobacco leaves are left to dry. In the secondary process, previously manufactured tobacco allocated in the factories where the weather conditions are not important. This fact determines that in the climate areas where this study tales place there are some cases in which we can find both factories and drying sheds, and others where there are either factories or drying sheds only. The location of these factories met various demands, being the most outstanding the ones related to geographic, strategic and political reasons. In most factories the choice of its location was often linked to the incoming of raw goods, mainly delivered through waterways –it is the case of Seville,) and by land, using railways. The location of the factories was linked to political reasons in only two cases Madrid and Logroño, which are the only ones that are not placed near the coast. The one in Madrid was built due to its political centrality and because geographically speaking, it was the reference landmark of means of land and rail transports. Many factories, in fact, were settled nearby rail stations. For the factory in Logroño, only political reasons were taken into consideration. I should like to close by undertaking a comparative study of factories in Seville, Madrid and San Sebastian. There are a number of reasons to substantiate this choice: -The factory in Seville was historically speaking the first that was built and the most important one. -The factory in Madrid was the most important one administratively. This factory was the headquarters as well as being, after Seville, the one which provided a model for other factories. -The factory in San Sebastian is the biggest in the North of Spain. The analysis carried out are related to the volume of the buildings and the surface areas of the courtyards, the surface of the roofs, the permeability of the walls and the openings of the façade, the orientation and the sun exposure, the indoor spatial distribution and organization and evolution of the uses (formerly and currently) I observe that in most of these factories there has been a change in the use of the buildings, from industrial cultural purposes. These buildings can be considered as adaptable infrastructures based on a combination of architectural practicability, sustainability and functionality.

Criterios de restauración, intervención y revitalización del patrimonio industrial : la fábrica de gas de San Paolo en Roma

La tesis está centrada en el patrimonio industrial, y trata de ahondar en los temas enunciados en el título, Criterios de restauración, intervención y revitalización del patrimonio industrial (capítulo 1). La fábrica de gas de San Paolo en Roma (capítulo 2): En el primer capítulo, se profundiza en los criterios institucionalizados de actuación en el patrimonio, pero también se habla sobre la singularidad, los valores originales, estratificados en cada construcción y su contexto. Ello resume la intención de la doctoranda al entender la necesidad del análisis de cada obra en modo profundo, concreto y abierto a novedosos acercamientos, antes de su transformación. Al hablar de intervención frente a restauración, se aborda la conocida polémica que plantea el modo de acercarse al legado histórico. Parece necesario enunciar cómo se consideran en el trabajo estos términos. Mientras la restauración (como diría Cesare Brandi, constituye el momento metodológico del reconocimiento de la obra de arte en su consistencia física y en su doble polaridad estética e histórica, en orden a su transmisión al futuro) es una acción más restrictiva, que implica atención suma a la recuperación y conservación de los valores significativos y únicos del bien, en comunicación con un (posible) equipo interdisciplinar; por intervención se entiende aquí un desarrollo más personal y libre por parte del proyectista, en el que se produce un proceso dialéctico entre la preexistencia y el posicionamiento crítico adoptado a la hora de dar un obligado nuevo uso a ese bien. Es decir, el contraste está en el diferente reconocimiento de la materialidad física y sus significados. En torno a la restauración/intervención, se analizan las perspectivas de actuación en España e Italia, contrastando factores como la formación del arquitecto o el entorno laboral-cultural, y utilizando el método analítico comparativo de casos. Habría un tercer concepto: el de revitalización del patrimonio industrial, Éste hace referencia a su transformación, a sus usos más comunes y compatibles, a la redimensión artística que ha experimentado la arquitectura industrial gracias al arte contemporáneo y a su relación con la Modernidad. Por último, se enuncia en el título el caso de estudio, la Fábrica, que ocupa el segundo capítulo. Se trata de un enorme conjunto industrial singular semi abandonado en el confín del centro histórico, cuyo protagonista es un gran gasómetro, que la autora ha tenido la oportunidad de descubrir en su estancia en la Ciudad Eterna. Este barrio constituyó el primer y único sector industrial de la Roma moderna a inicios del siglo XX. Por varias causas históricas y voluntad política, la ciudad prácticamente no tuvo más desarrollo industrial que el área mencionada, donde se implantaron servicios y actividades de gran transformación (Matadero, Mercados Generales, Almacenes Fluviales, Central Montemartini o esta fábrica). A partir de 1920, se empezó a construir un tejido productivo que la llevó de la situación de posguerra al milagro económico. Frente al mito de la Roma monumental o de la Roma cotidiana, aparece el aspecto industrial como mito de la contemporaneidad. Sin embargo, esta ciudad es demasiado antigua como para convertirse en moderna, y su proceso industrial en contraste con su larga historia resulta breve. La inmediata relación de la fase industrial romana con el resultado de este desarrollo viene identificada con las instalaciones señaladas, más significativas por su excepcionalidad que por la duración del momento irrepetible que representan. Su presencia física perdura a pesar de su abandono, aisladas tras su muro perimetral y casi desconocidas. Esto las hace apetecibles para la especulación inmobiliaria y resultan un caso de estudio ideal para realizar un Plan de Intervención Global, en el que determinar una serie de intervenciones necesarias, usos compatibles y directrices para la ordenación del conjunto, coherentes con los conceptos manejados en el primer capítulo. ABSTRACT The thesis focuses on industrial heritage, delving into the topics listed in its title, Criteria for the restoration, intervention and revitalisation of industrial heritage (chapter 1). The San Paolo gas factory in Rome (chapter 2): Chapter one elaborates on the official criteria to take action on heritage, but also deals with the singularity and original values unique to each construction and its context. This underlines the PhD candidate’s intentions by understanding the need for an in-depth and specific analysis, open to novel approaches to each site before its transformation. When speaking of intervention, as opposed to restoration, we address the well-known controversy that stems from the different ways of approaching historical heritage. It seems necessary to explain how these terms are interpreted in this piece of work. Whereas restoration (as Cesare Brandi would say, constitutes the methodological moment in which the work of art is appreciated in its material form and in its historical and aesthetic duality, with a view to transmitting it to the future) is a more restrictive action, demanding the utmost attention to the recovery and preservation of the piece of heritage’s defining and exceptional values, (ideally) in communication with a interdisciplinary team. By intervention, we hereby understand a more personal and free procedure carried out by the designer in which a dialectical process takes place between preexistence and the critical stance taken in order to give that good a much needed new use. That is, contrast lies in the different recognition of physical materiality and its meanings. As for the restoration/intervention dilemma, the different courses of action followed in Spain and Italy will be analysed, contrasting the architects’ training, the labourcultural environment and taking an analytical comparative case study method. There is a third concept: the revitalisation of industrial heritage, which refers to its transformation, its most common and compatible uses, the artistic redimensioning that industrial architecture has experienced thanks to contemporary art, and its relationship with Modernity. Lastly, the title refers to the case study, i.e., the analysis of the Factory, which makes up chapter 2. It is an enormous and semiabandoned peerless industrial complex on the edge of the historical city centre whose main landmark is a huge gasometer, which the author had the chance to discover during her stay in the Eternal City. This district made up the first and only industrial sector in the modern Rome of the early 20th century. Due to a number of reasons, both historical and political, barely no further industrial development took place in the city beyond the mentioned area, where processing services and activities were set up (Slaughterhouse, General Markets, Riverside Warehouses, Montemartini Power Plant or the said factory). In the 1920s began the construction of the productive fabric that raised the city from its postwar plight to the economic miracle. As opposed to the myth of monumental Rome and daily-life Rome, this industrial Rome rose as contemporaneity’s myth. However, this city is too ancient to become modern, and its industrial process strikes us as brief when confronted with its long history. The close relationship between Rome’s industrial stage and the consequences of this development is best represented by the aforementioned facilities, more relevant due to their uniqueness than the length of the once-in-a-lifetime moment they represent. Their physical presence lives on despite abandonment and isolation, as they stand vastly unknown behind their perimeter walls. This renders them appealing to property speculators, becoming an ideal case study for the creation of a Global Intervention Plan in which to determine a series of necessary actions, compatible uses and directives, all of them consistent with the concepts dealt with in chapter 1. RIASSUNTO La tesi è focalizzata sul patrimonio industriale e cerca di approfondire le tematiche contenute nel titolo, Criteri di restauro, intervento e rivitalizzazione del patrimonio industriale (capitolo 1). La Fabbrica del gas di San Paolo a Roma (capitolo 2): Nel primo capitolo vengono presi in esame i criteri istituzionalizzati di attuazione nel patrimonio, ma si parla anche della unicità, i valori originali, stratificati in ogni costruzione ed il suo contesto. Questo riassume l’intenzione della dottoranda di capire la necessità dell’analisi di ogni opera in modo profondo, concreto e aperto a nuovi approcci, prima della sua trasformazione. Nel parlare di intervento versus restauro, si affronta la famosa polemica che considera il modo di avicinarsi all’eredità storica. Appare necessario precisare come questi termini sono considerati in questo lavoro. Mentre il restauro (come direbbe Cesare Brandi, costituisce il momento metodologico del riconoscimento dell’opera d’arte nella sua consistenza fisica e nella duplice polarità estetica e storica, in vista della sua trasmissione nel futuro) è un’azione più restrittiva, e quindi implica massima attenzione al recupero e conservazione dei valori significativi ed unici del bene, in comunicazione con una (eventuale) squadra interdisciplinare; per intervento si intende qui un processo più personale e libero del progettista, nel quale si produce uno sviluppo dialettico tra la preesistenza e la posizione critica adottata quando si deve dare un nuovo uso di quel bene. Vale a dire che il contrasto risiede nel diverso riconoscimento della materialità fisica e i loro significati. Intorno al restauro / intervento, si analizzano le prospettive di attuazione in Spagna e Italia, contrastando diversi fattori come la formazione dell’architetto o l’ambiente lavorativo-culturale, ed impiegando il metodo analitico comparativo dei casi. Ci sarebbe un terzo concetto: quello della rivitalizzazione del patrimonio industriale. Questo fa riferimento alla sua trasformazione, ai suoi usi più comuni e compatibili, al ridimensionamento artistico vissuto dall’archeologia industriale grazie all’arte contemporanea ed al suo rapporto con la Modernità. In ultimo, si enuncia nel titolo il caso di studio, ovvero l’analisi della Fabbrica, che occupa il secondo capitolo. Si tratta di un enorme complesso industriale semi-abbandonato al confine con il centro storico, il cui protagonista è un grande gasometro, che l’autrice ha avuto modo di scoprire durante il suo soggiorno nella Città Eterna. Questo quartiere costituì il primo e unico moderno settore industriale della Roma moderna all’inizio del Novecento. Per diverse ragioni storiche e volontà politiche, la città praticamente non ha subito ulteriore sviluppo industriale oltre l’area citata, dove si impiantarono servizi e attività di grande trasformazione (Mattatoio, Mercati Generali, Magazzini Generali, Centrale Montemartini o questa fabbrica). Dal 1920, si inizió a costruire un tessuto prodottivo che portò la città dalla situazione post-bellica al miracolo economico. Di fronte al mito della Roma monumentale o della Roma quotidiana, appare questa Roma industriale come mito della contemporaneità. Tuttavia, questa città è troppo antica per diventare moderna, ed il suo processo industriale in contrasto con la sua lunga storia risulta breve. Il rapporto diretto della fase industriale romana con il risultato di questo sviluppo viene identificato con gli impianti segnalati, più significativi per la loro unicità che per la durata del momento irripetibile che rappresentano. La loro presenza fisica perdura nonostante l’abbandono, isolati dietro il loro muro di cinta e quasi sconosciuti. Questo li rende auspicabile per la speculazione immobiliare e sono un caso ideale per eseguire un Piano di Intervento Globale, che determini una serie di interventi necessari, usi compatibili e linee guida per la pianificazione del tutto, in linea con i concetti utilizzati nel primo capitolo.

Geometric documentation of the flour factory "El Puente Colgante" in Aranjuez (Madrid).

The goal of this communication is to offer, through computer-aided design tools, a methodology to recover and virtually reconstruct disappeared buildings of our industrial historical heritage. It will be applied to the case of the flour factory "El Puente Colgante" (The Suspended Bridge) in Aranjuez, which was demolished in 2001. The process is as follows: After a historical analysis of the evolution in time of the flour factory, a field work provides data allowing an info graphic reconstruction of the factory. Once this information has been processed, a lifting of the current state is made with AutoCAD, and a three-dimensional model is built with the Rhinoceros application. Then images of the ensemble are obtained with the applications Rhinoceros and V-Ray, ending with a postproduction with Photoshop. The proposed methodology has permitted to obtain a three-dimensional model of the flour factory ?El Puente Colgante? in Aranjuez, with an accurate virtual reconstruction of its original state prior to demolition. The procedure exposed is susceptible to be generalized for any other example of industrial architecture.

Projectar com o lugar

Dissertação para obtenção do grau de Mestre em Arquitcetura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Towards more flexible Architecture Description Languages for industrial applications

Architecture Description Languages (ADLs) have emerged in recent years as a tool for providing high-level descriptions of software systems in terms of their architectural elements and the relationships among them. Most of the current ADLs exhibit limitations which prevent their widespread use in industrial applications. In this paper, we discuss these limitations and introduce ALI, an ADL that has been developed to address such limitations. The ALI language provides a rich and flexible syntax for describing component interfaces, architectural patterns, and meta-information. Multiple graphical architectural views can then be derived from ALI's textual notation.

Simplified architecture of a neurofuzzy controller applied on industrial systems for fluid flow control

This work presents a simplified architecture of a neurofuzzy controller for general purpose applications that tries to minimize the processing used in the several stages of hazy modeling of systems. The basic procedures of fuzzification and defuzzification are simplified to the maximum while the inference procedures are computed in a private way. The simplified architecture allows a fast and easy configuration of the neurofuzzy controller and the structuring rules that define the control actions is automatic. Th controller's Limits and performance are standardized and the control actions are previously calculated. For application, the industrial systems of fluid flow control will be considered.

Design of information architecture of the web site of the Faculty of Industrial Engineering and Tourism of the Universidad Central “Marta Abreu” de Las Villas (Cuba)

The information architecture supports information retrieval by users in Web environment. The design should be center in the information user, favoring usability. The Faculty of Industrial Engineering and Tourism of the Universidad Central "Marta Abreu" de Las Villas, lacks a site that enhances the disclosure of information to its members. Are presented as objectives of the study: 1) conduct a user survey to identify information needs of users, 2) establish guidelines for information architecture for the institution focused on users, 3) designing the information architecture for the institution and 4) designed to evaluate the proposal. Are presented as objectives of the study: 1) to realize a user study to identify the information needs of users, 2) establish guidelines for information architecture for the institution focused on users, 3) to design the information architecture for the institution and 4) to evaluate the proposal designed. To obtain results are used methods in the theoretical and empirical levels. Besides, are use techniques that favored the design and evaluation. Is designed the intranet of the Faculty of Industrial Engineering and Tourism. Is evaluated the proposed design for the validation of the results.

An architecture for user configurable mobile collaborative geographic applications

Geographic information is increasingly being touted for use in research and industrial projects. While the technology is now available and affordable, there is a lack of easy to use software that takes advantage of geographic information. This is an important problem because users are often researchers or scientists who have insufficient software skills, and by providing applications that are easier to use, time and financial resources can be taken from training and be better applied to the actual research and development work. A solution for this problem must cater for the user and research needs. In particular it must allow for mobile operation for fieldwork, flexibility or customisability of data input, sharing of data with other tools and collaborative capabilities for the usual teamwork environment. This thesis has developed a new architecture and data model to achieve the solution. The result is the Mobile Collaborative Annotation framework providing an implementation of the new architecture and data model. Mobile Collaborative Mapping implements the framework as a Web 2.0 mashup rich internet application and has proven to be an effective solution through its positive application to a case study with fieldwork scientists. This thesis has contributed to research into mobile computing, collaborative computing and geospatial systems by creating a simpler entry point to mobile geospatial applications, enabling simplified collaboration and providing tangible time savings.

Entertainment architecture : constructing a framework for the creation of an emerging transmedia form

This thesis investigates the radically uncertain formal, business, and industrial environment of current entertainment creators. It researches how a novel communication technology, the Internet, leads to novel entertainment forms, how these lead to novel kinds of businesses that lead to novel industries; and in what way established entertainment forms, businesses, and industries are part of that process. This last aspect is addressed by focusing on one exemplary es-tablished form: movies. Using a transdisciplinary approach and a combination of historical analysis, industry interviews, and an innovative mode of ‘immersive’ textual analysis, a coherent and comprehensive conceptual framework for the creation of and re-search into a specific emerging entertainment form is proposed. That form, products based on it, and the conceptual framework describing it are all re-ferred to as Entertainment Architecture (‘entarch,’ for short). The thesis charac-terises this novel form as Internet-native transmedia entertainment, meaning it fully utilises the unique communicative characteristics of the Internet, and is spread across media. The thesis isolates four constitutive elements within Entertainment Architec-ture: story, play, ‘dance,’ and ‘glue.’ That is, entarch tells a story; offers playful interaction; invites social interaction between producer and consumer, and amongst consumers (‘dance’); and all components of it can be spread across many media, but are so well interconnected and mutually dependent that they are perceived as one product instead of many (‘glue’). This sets entarch apart from current media franchises like Star Wars or Halo, which are perceived as many products spread across many media. Entarch thus embraces the commu-nicative behaviour of Internet-native consumers instead of forcing them to de-sist from it, it harnesses the strengths of various media while avoiding some of their weaknesses, and it can sustain viable businesses. The entarch framework is an innovative contribution to scholarship that al-lows researchers to investigate this emerging entertainment form in a structured way. The thesis demonstrates this by using it to survey business models appro-priate to the entarch environment. The framework can also be used by enter-tainment creators — exemplified in the thesis by moviemakers — to delimit the room for manoeuvre available to them in a changing environment.

Entertainment architecture : constructing a framework for the creation of an emerging transmedia form

The topic of this research is a novel entertainment form currently emerging from the youngest human communication technology, the Internet. This form, products based on it, and the conceptual framework describing it are all referred to as Entertainment Architecture (‘entarch,’ for short). Entarch is classified as Internet-native transmedia entertainment — it fully utilises the unique communicative characteristics of the Internet and is not based on just one medium. A number of entarch examples are explored through ‘immersive’ textual analysis — a new mode of textual analysis required for research into this kind of entertainment. As a secondary priority, entarch is related to the movie — which is chosen as an exemplary existing entertainment form finding itself in a radically uncertain formal, business, and industrial environment, and accordingly is struggling financially. Throughout, formal, business, and industrial consequences of the emergence of Entertainment Architecture are explored. This research is an example of applied cultural science, as it treats culture as a source of innovation and a complex dynamic system with technological as well as human characteristics. It analyses the dynamics of cultural change in the context of business development, consumer experience, and economic evolution — with an intrinsically transdisciplinary methodology.

Efficient route update and maintenance processes for multipath routing in large-scale industrial wireless sensor networks

Reliable communications is one of the major concerns in wireless sensor networks (WSNs). Multipath routing is an effective way to improve communication reliability in WSNs. However, most of existing multipath routing protocols for sensor networks are reactive and require dynamic route discovery. If there are many sensor nodes from a source to a destination, the route discovery process will create a long end-to-end transmission delay, which causes difficulties in some time-critical applications. To overcome this difficulty, the efficient route update and maintenance processes are proposed in this paper. It aims to limit the amount of routing overhead with two-tier routing architecture and introduce the combination of piggyback and trigger update to replace the periodic update process, which is the main source of unnecessary routing overhead. Simulations are carried out to demonstrate the effectiveness of the proposed processes in improvement of total amount of routing overhead over existing popular routing protocols.

Dynamics of industry architecture and firm’s capability development : role of knowledge integration within product innovation

Aligned with the decline of Marshalian view of industry as constituting homogeneous set of firms, the new perspective is emerging by concentrating more on dynamics of sectors as the building block of industrial changes. Based on new assumptions, much of the action in terms of strategy, technology, and knowledge development does not happen either among firms within a stable industry, or through the growth or decline of certain sectors compared to others. Instead, the action happens in terms of the definition, redefinition, drawing, and redrawing of the very nature of these sectors. Technology does not progress and develop within a sector; rather it shapes (and is shaped by) the encompassing architecture of multiple sectors.