Structure, bonding state and in-vitro study of Ca–P–Ti film deposited on Ti6Al4V by RF magnetron sputtering

Experimental investigation of functionally graded calcium phosphate-based bio-active films on Ti-6A1-4V orthopaedic alloy prepared in an RF magnetron sputtering plasma reactor is reported. The technique involves concurrent sputtering of Hydroxyapatite (HA) and Ti targets, which results in remarkably enhanced adhesion of the film to the substrate and stability of the interface. The films have been characterized using X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The XPS data show that the films are composed of O, Ca, P and Ti, and reveal the formation of O=P groups and hybridization of O-Ca-P. The XRD pattern shows that the Ca-P thin films are of crystalline calcium oxide phosphate (4CaO·P2O5) with preferred orientation varying with processing parameters. High-resolution optical emission spectra show that the emission of CaO is dominant. The CaO, PO and CaPO species are strongly influenced by deposition conditions. The introduction of Ti element during deposition provides a stable interface between bio-inert substrates Ti-6A1-4V and bioactive HA coating. In-vitro cell culturing tests suggest excellent biocompatibility of the Ca-P-Ti films.

Developing a three-dimensional in-vitro cell culture model for studying breast and prostate cancer using starPEG-heparin hydrogels

Introduction Hydrogels prepared from poly(ethylene glycol) (PEG) and maleimide-functionalized heparin provide a potential matrix for use in developing three dimensional (3D) models. We have previously demonstrated that these hydrogels support the cultivation of human umbilical vein endothelial cells (HUVECs) (1). We extend this body of work to study the ability to create an extracellular matrix (ECM)-like model to study breast and prostate cancer cell growth in 3D. Also, we investigate the ability to produce a tri-culture mimicking tumour angiogenesis with cancer spheroids, HUVECs and mesenchymal stem cells (MSC). Materials and Methods The breast cancer cell lines, MCF-7 and MDA-MB-231, and prostate cancer cell lines, LNCaP and PC3, were seeded into starPEG-heparin hydrogels and grown for 14 Days to analyse the effects of varying hydrogel stiffness on spheroid development. Resulting hydrogel constructs were analyzed via Alamar Blue assays, light microscopy, and immunofluorescence staining for cytokeratin 8/18, Ki67 and E-Cadherin. Cancer cell lines were then pre-grown in hydrogels for 5-7 days and then re-seeded into starPEG-heparin hydrogels functionalised with RGD, SDF-1, bFGF and VEGF as spheroids with HUVECs and MSC and grown for 14 days as a tri-culture in Endothelial Cell Growth Medium (ECGM; Promocell). Cell lines were also seeded as a single cell suspension into the functionalised tri-culture system. Cultures were fixed in 4% paraformaldehyde and analysed via immunostaining for Von Willebrand Factor and CD31, as well as the above mentioned markers, and observed using confocal microscopy. Results Cultures prepared in MMP-cleavable starPEG-heparin hydrogels display spheroid formation in contrast to adherent growth on tissue culture plastic. Small differences were visualised in cancer spheroid growth between different gel stiffness across the range of cell lines. Cancer cell lines were able to be co-cultivated with HUVECs and MSC. HUVEC tube formation and cancer line spheroid formation occured after 3-4 days. Interaction was visualised between tumours and HUVECs via confocal microscopy. Slightly increased interaction was seen between cancer tumours and micro-vascular tubes when seeded as single cells compared with the pre-formed spheroid approach. Further studies intend to utilise cytokine gradients to further optimise the ECM environment of in situ tumour angiogenesis. Discussion and Conclusions Our results confirm the suitability of hydrogels constructed from starPEG-heparin for HUVECs and MSC co-cultivation with cancer cell lines to study cell-cell and cell-matrix interactions in a 3D environment. This represents a step forward in the development of 3D culture models to study the pathomechanisms of breast and prostate cancer. References 1. Tsurkan MV, Chwalek K, Prokoph S, Zieris A, Levental KR, Freudenberg U, Werner C. Advanced Materials. 25, 2606-10, 2013. Disclosures The authors declare no conflicts of interest

Characterization of the toxic potential of nanomaterials using in vitro cell models

Os nanomateriais são estruturas com uma ou mais dimensões inferiores a 100 nanómetros. Devido à sua pequena dimensão, as nanopartículas apresentam atributos únicos, tais como a sua elevada área superficial relativamente à sua massa, reactividade ou força tênsil. Estas características influenciam grandemente algumas das propriedades dos nanomateriais, como a sua hidrofobicidade, carga ou toxicidade. As propriedades das nanopartículas tornam-nas também muito úteis para o Homem, sendo aplicadas em medicina, farmácia, electrónica, cosmética, vestuário e biotecnologia, entre outras. O aumento de produção e utilização de nanomateriais tem vindo a aumentar também a possibilidade de exposição humana a este tipo de partículas, levando a preocupações relativas ao risco de toxicidade aguda ou crónica. A exposição humana pode ocorrer por diversas vias, sendo as mais relevantes a via inalatória, ingestão ou contacto com a pele. Dependendo do material e do órgão-alvo, a exposição a nanomateriais pode conduzir a diferentes consequências biológicas: a nível dos órgãos, os nanomateriais podem levar a inflamação ou a supressão do sistema imunitário e, a nível celular e molecular, a perturbações na estrutura e integridade do genoma, assim como a interacções com moléculas biológicas e inibição da actividade proteica, entre outras consequências. Um dos nanomateriais mais utilizados são os nanotubos de carbono. Estes são constituídos por grafite cilíndrica disposta numa única camada (designados nanotubos de carbono de parede simples) ou em várias (nanotubos de carbono de parede múltipla). Os nanotubos de carbono apresentam propriedades como resistência e condutividade que os tornam muito úteis em aplicações como aparelhos electrónicos, vestuário ou biomedicina; cada vez mais, portanto, se torna provável a exposição ocupacional ou ambiental a este material. A semelhança estrutural destas partículas com fibras de amianto conduziu a questões relativas à sua segurança, pelo que já foram elaborados diversos estudos relativos aos seus efeitos biológicos. Alguns trabalhos sugerem que os nanotubos de carbono têm a capacidade de produzir toxicidade associada a lesões físicas, à produção de danos oxidativos por interacção com mecanismos celulares, ou a morte celular. Outros trabalhos defendem que estas partículas não causam toxicidade relevante. O projecto de dimensão europeia “NANoREG” surgiu da necessidade de ser desenvolvida legislação e regulamentação apoiadas em conhecimento científico e adequadas à produção e ao uso actual de nanomateriais. Este trabalho teve como objectivos principais a determinação do potencial cito- e genotóxico de um conjunto de nanotubos de carbono de parede múltipla (designados NM-400 a NM-403), e a consequente tentativa de associar este potencial às características físico-químicas dos nanomateriais. Com este objectivo, a exposição por via inalatória foi analisada, pelo uso de duas linhas celulares in vitro provenientes de tecidos do tracto respiratório: epitélio pulmonar (células A549) e epitélio brônquico (células BEAS-2B). A citotoxicidade dos nanotubos de carbono foi analisada com base em três parâmetros. Em primeiro lugar, as células foram contadas após a exposição aos nanomateriais utilizando o corante azul de tripanao para excluir as células inviáveis; a contagem foi realizada 3 e 24 horas após a exposição das células aos nanotubos. Os resultados deste ensaio apontam para a ausência de citotoxicidade após a exposição mais curta, e dados inconsistentes após a mais longa. Em segundo lugar, foi realizado o ensaio clonogénico, que se baseia na capacidade das células de se dividirem após a exposição ao agente em estudo. Este ensaio só foi realizado nas células A549 pois as BEAS-2B não permitem a formação de colónias. Os resultados apontam para uma citotoxicidade após a exposição a todos os nanomateriais, cuja intensidade se relaciona directamente com o tamanho das partículas, assim como ao seu diâmetro e área de superfície. Em terceiro lugar, foram calculados dois índices de viabilidade no ensaio dos Micronúcleos, cujo objectivo é avaliar se as células se dividiram durante a exposição aos nanomateriais em comparação com o controlo, e cujos resultados apresentam incoerências em relação aos outros já referidos. Estes dados podem ser justificados pelas diferenças existentes entre os ensaios, como o tempo de exposição ou a densidade celular. Os efeitos genotóxicos dos nanomateriais foram avaliados com recurso aos ensaios do cometa e dos micronúcleos. O primeiro detecta lesões pequenas e reversíveis nas cadeias de DNA, ao passo que o segundo detecta efeitos irreversíveis ao nível cromossómico, tais como quebras ou perdas de cromossomas. Os resultados do ensaio do cometa sugerem que nenhum dos nanomateriais testados é genotóxico, uma vez que em ambas as linhas celulares e em ambos os tempos de exposição, os resultados são negativos. O ensaio dos micronúcleos, por outro lado, aponta para existência de genotoxicidade de dois dos nanomateriais (NM-401 e NM-402) nas células A549, mas não em células BEAS-2B. Uma possível explicação para estes dados aparentemente contraditórios pode residir na hipótese de estes nanotubos de carbono serem compostos com efeitos aneugénicos, mas não clastogénicos: o ensaio dos micronúcleos permite a detecção de ambos os mecanismos de acção, ao passo que o ensaio do cometa só revela a quebra de cadeias de DNA. Outra justificação para os resultados é a possível influência da perda de viabilidade das células analisadas. Com base nos dados do ensaio clonogénico, estas partículas apresentam elevada citotoxicidade, pelo que os resultados dos ensaios de genotoxicidade, em particular do Ensaio do Cometa, poderão ser afectados por estes efeitos. O meio de cultura usado para expor as células aos nanomateriais também é um parâmetro muito relevante na sua toxicidade. Neste trabalho, foram usados meios de cultura com proteínas, que podem ser adsorvidas pelas partículas e formar uma “corona” em seu redor; este processo pode alterar propriedades importantes dos nanomateriais, entre os quais o seu potencial efeito biológico. Também o método usado para conseguir uma dispersão homogénea de nanomateriais pode conduzir a diferenças nos resultados dos ensaios de toxicidade. Neste estudo, foram observados alguns problemas relativos à perda de homogeneidade das dispersões de nanotubos de carbono, o que pode ter conduzido a que as células fossem expostas a massas de partículas de grandes dimensões conjuntamente com partículas individualizadas. O período durante o qual as células são expostas ao nanomaterial é também um aspecto essencial na produção de efeitos tóxicos. Resumindo, este projecto forneceu informações relativas à toxicidade dos nanotubos de carbono que, complementadas pelas conclusões dos restantes parceiros do projecto europeu, poderão contribuir significativamente para a avaliação de risco e criação de legislação relativamente à utilização de nanomateriais. Na linha celular BEAS-2B, nenhum destes nanomateriais parece produzir efeitos tóxicos, quer a nível de célula, quer a nível de genoma, nas condições experimentais utilizadas. Nas células A549, por outro lado, os três nanomateriais testados parecem ser acentuadamente citotóxicos, e dois deles (NM-401 e NM-402) são também genotóxicos. Em relação a perspectivas futuras, pode-se concluir que nem todos os ensaios de toxicidade existentes actualmente são adequados à análise de nanopartículas, pelo que novas metodologias devem ser desenvolvidas e complementadas por ensaios in vivo. Todos os estudos envolvendo nanomateriais deverão também descrever as características físico-químicas dos materiais usados, de forma a se poderem comparar os resultados com os de outros trabalhos.

A novel medium for the development of in vitro cell culture system from Penaeus monodon

Lack of a valid shrimp cell line has been hampering the progress of research on shrimp viruses. One of the reasons identified was the absence of an appropriate medium which would satisfy the requirements of the cells in vitro. We report the first attempt to formulate an exclusive shrimp cell culture medium (SCCM) based on the haemolymph components of Penaeus monodon prepared in isosmotic seawater having 27 % salinity. The SCCM is composed of 22 amino acids, 4 sugars, 6 vitamins, cholesterol, FBS, phenol red, three antibiotics, potassium dihydrogen phosphate and di-sodium hydrogen phosphate at pH 6.8–7.2. Osmolality was adjusted to 720 ± 10 mOsm kg-1 and temperature of incubation was 25 8C. The most appropriate composition was finally selected based on the extent of attachment of cells and their proliferation by visual observation. Metabolic activity of cultured cells was measured by MTT assay and compared with that in L-15 (29), modified L-15 and Grace’s insect medium, and found better performance in SCCM especially for lymphoid cells with 107 % increase in activity and 85 ± 9 days of longevity. The cells from ovary and lymphoid organs were passaged twice using the newly designed shrimp cell dissociation ‘‘cocktail’’.

In vitro cell motility as a potential mesenchymal stem cell marker for multipotency.

Mesenchymal stem cells (MSCs) are expected to have a fundamental role in future cell-based therapies because of their high proliferative ability, multilineage potential, and immunomodulatory properties. Autologous transplantations have the "elephant in the room" problem of wide donor variability, reflected by variability in MSC quality and characteristics, leading to uncertain outcomes in the use of these cells. We propose life imaging as a tool to characterize populations of human MSCs. Bone marrow MSCs from various donors and in vitro passages were evaluated for their in vitro motility, and the distances were correlated to the adipogenic, chondrogenic, and osteogenic differentiation potentials and the levels of senescence and cell size. Using life-image measuring of track lengths of 70 cells per population for a period of 24 hours, we observed that slow-moving cells had the higher proportion of senescent cells compared with fast ones. Larger cells moved less than smaller ones, and spindle-shaped cells had an average speed. Both fast cells and slow cells were characterized by a low differentiation potential, and average-moving cells were more effective in undergoing all three lineage differentiations. Furthermore, heterogeneity in single cell motility within a population correlated with the average-moving cells, and fast- and slow-moving cells tended toward homogeneity (i.e., a monotonous moving pattern). In conclusion, in vitro cell motility might be a useful tool to quickly characterize and distinguish the MSC population's differentiation potential before additional use.

Tuning the in vitro cell cytotoxicity of dinuclear arene ruthenium trithiolato complexes: Influence of the arene ligand

A new series of cationic dinuclear arene ruthenium complexes bridged by three thiophenolato ligands, [(η6-arene)2Ru2(μ2-SR)3]+ with arene = indane, R = met: 1 (met = 4-methylphenyl); R = mco: 4 (mco = 4-methylcoumarin-7-yl); arene = biphenyl, R = met: 2; R = mco: 5; arene = 1,2,3,4-tetrahydronaphthalene, R = met: 3; R = mco: 6, have been prepared from the reaction of the neutral precursor [(η6-arene)Ru(μ2-Cl)Cl]2 and the corresponding thiophenol RSH. All cationic complexes have been isolated as chloride salts and fully characterized by spectroscopic and analytical methods. The molecular structure of 1, solved by X-ray structure analysis of a single crystal of the chloride salt, shows the two ruthenium atoms adopting a pseudo-octahedral geometry without metal–metal bond in accordance with the noble gas rule. All complexes are stable in H2O at 37 °C, but only 1 remains soluble in a 100 mM aqueous NaCl solution, while significant percentages (30–60 %) of 2–6 precipitate as chloride salts under these conditions. The 4-methylphenylthiolato complexes (R = met) are highly cytotoxic towards human ovarian cancer cells, the IC50 values being in the sub-micromolar range, while the 4-methylcoumarin-7-yl thiolato complexes (R = mco) are only slightly cytotoxic. Complexes 1 and 3 show the highest in vitro anticancer activity with IC50 values inferior to 0.06 μM for the A2780 cell line. The results demonstrate that the arene ligand is an important parameter that should be more systematically evaluated when designing new half-sandwich organometallic complexes.

Effect of bone graft density on in vitro cell behavior with enamel matrix derivative

OBJECTIVES Bone replacement grafting materials play an important role in regenerative dentistry. Despite a large array of tested bone-grafting materials, little information is available comparing the effects of bone graft density on in vitro cell behavior. Therefore, the aim of the present study is to compare the effects of cells seeded on bone grafts at low and high density in vitro for osteoblast adhesion, proliferation, and differentiation. MATERIALS AND METHODS The response of osteoblasts to the presence of a growth factor (enamel matrix derivative, (EMD)) in combination with low (8 mg per well) or high (100 mg per well) bone grafts (BG; natural bone mineral, Bio-Oss®) density, was studied and compared for osteoblast cell adhesion, proliferation, and differentiation as assessed by real-time PCR. Standard tissue culture plastic was used as a control with and without EMD. RESULTS The present study demonstrates that in vitro testing of bone-grafting materials is largely influenced by bone graft seeding density. Osteoblast adhesion was up to 50 % lower when cells were seeded on high-density BG when compared to low-density BG and control tissue culture plastic. Furthermore, proliferation was affected in a similar manner whereby cell proliferation on high-density BG (100 mg/well) was significantly increased when compared to that on low-density BG (8 mg/well). In contrast, cell differentiation was significantly increased on high-density BG as assessed by real-time PCR for markers collagen 1 (Col 1), alkaline phosphatase (ALP), and osteocalcin (OC) as well as alizarin red staining. The effects of EMD on osteoblast adhesion, proliferation, and differentiation further demonstrated that the bone graft seeding density largely controls in vitro results. EMD significantly increased cell attachment only on high-density BG, whereas EMD was able to further stimulate cell proliferation and differentiation of osteoblasts on control culture plastic and low-density BG when compared to high-density BG. CONCLUSION The results from the present study demonstrate that the in vitro conditions largely influence cell behavior of osteoblasts seeded on bone grafts and in vitro testing. CLINICAL RELEVANCE These results also illustrate the necessity for careful selection of bone graft seeding density to optimize in vitro testing and provide the clinician with a more accurate description of the osteopromotive potential of bone grafts.

Somatic embryogenesis in sugarcane - An addendum to the invited review 'Sugarcane biotechnology: The challenges and opportunities,' in vitro cell. Dev. Biol. Plant 41(4): 345-363; 2005

Since the 1960s, numerous studies on sugarcane plant regeneration have been reported. Essentially, successful culture and regeneration of plants from protoplasts, cells, callus, and various tissue and organs, have been achieved in this crop. Although plant regeneration from callus cultures had been reported since the 1960s, definitive proof of somatic embryo development was not available until 1983. Since then, considerable progress has been made in understanding and refining somatic embryogenesis and plant regeneration in sugarcane, for which development of an efficient embryogenic system was critical for the application of transgenic technology. Recent research in Australia and South Africa has led to the development of direct somatic embryogenic systems, which may improve transgenesis in sugarcane.

Combined Effect of Cryogel Matrix and Temperature-Reversible Soluble-Insoluble Polymer for the Development of in Vitro Human Liver Tissue

Hepatic cell culture on a three-dimensional (3D) matrix or as a hepatosphere appears to be a promising in vitro biomimetic system for liver tissue engineering applications. In this study, we have combined the concept of a 3D scaffold and a spheroid culture to develop an in vitro model to engineer liver tissue for drug screening. We have evaluated the potential of poly(ethylene glycol)-alginate-gelatin (PAG) cryogel matrix for in vitro culture of human liver cell lines. The synthesized cryogel matrix has a flow rate of 7 mL/min and water uptake capacity of 94% that enables easy nutrient transportation in the in vitro cell culture. Youngs modulus of 2.4 kPa and viscoelastic property determine the soft and elastic nature of synthesized cryogel. Biocompatibility of PAG cryogel was evaluated through MTT assay of HepG2 and Huh-7 cells on matrices. The proliferation and functionality of the liver cells were enhanced by culturing hepatic cells as spheroids (hepatospheres) on the PAG cryogel using temperature-reversible soluble-insoluble polymer, poly(N-isopropylacrylamide) (PNIPAAm). Pore size of the cryogel above 100 mu m modulated spheroid size that can prevent hypoxia condition within the spheroid culture. Both the hepatic cells have shown a significant difference (P < 0.05) in terms of cell number and functionality when cultured with PNIPAAm. After 10 days of culture using 0.05% PNIPAAm, the cell number increased by 11- and 7-fold in case of HepG2 and Huh-7 cells, respectively. Similarly, after 10 days of hepatic spheroids culture on PAG cryogel, the albumin production, urea secretion, and CYP450 activity were significantly higher in case of culture with PNIPAAm. The developed tissue mass on the PAG cryogel in the presence of PNIPAAm possess polarity, which was confirmed using F-actin staining and by presence of intercellular bile canalicular lumen. The developed cryogel matrix supports liver cells proliferation and functionality and therefore can be used for in vitro and in vivo drug testing.