A comparison of model laws as a starting point for the development of an enforceable international consumer protection regime

This article is concerned primarily with an examination and comparison of select aspects of the model international consumer protection laws proposed by the United Nations (UN), the European Union (EU), and the Organisation for Economic Co-operation and Development (OECD), using the Trade Practices Act 1974 (Australia) as a basis for examination and comparison. As a secondary consideration, it also broadly examines the content of, and differences between, the model laws. The motive for this article is that any future enforceable international consumer protection regime (possibly in the form of an international treaty or convention) would need to take into account the UN, EU and OECD guidelines. A cross-comparison of those model laws, and a comparison of them with the consumer protection provisions of a well established national consumer protection law, should provide a useful starting point for the development of such a regime. The 'select aspects' of the model laws in question are the various provisions of those laws which could relate to situations involving the wrong delivery or non-delivery of goods.

The Colombian Constitution of 1991 as the Starting Point of a new Constitutionalism in Latin America

The objective of this article is to show that the Colombian Constitution of 1991 has certain traits that clearly differentiate it from Western constitutional tradition. Some of these traits would later be included in constitutional processes and constitutions in Venezuela (1999), Ecuador (1998 and 2008) and Bolivia (2009), in a process collectively known as Latin American Neo-Constitutionalism. This paper intends to demonstrate how the text of the Colombian Constitution represents a turning point that marks the beginning and establishes the foundations for the development of a home-grown constitutional form in Latin America over the last two decades.

Starting point towards bilingualism in higher education : results in english at the university entrance test from a gender perspective. 'Punto de partida hacia el bilingüismo en Educación Superior : resultados de inglés en la prueba de acceso a la universidad desde una perpectiva de género'.

Resumen basado en el de la publicación

Swiss Alps Jungfrau Aletsch UNESCO World Heritage Site - The state of this World Heritage region as a starting point for regional monitoring

The UNESCO listing as World Heritage Site confirms the outstanding qualities of the high-mountain region around the Great Aletsch Glacier. The region of the World Heritage Site now faces the responsibility to make these qualities visible and to preserve them for future generations. Consequently the qualities of the site must not be regarded in isolation but in the context of the entire region with its dynamics and developments. Regional monitoring is the observation and evaluation of temporal changes in target variables. It is thus an obligation towards UNESCO, who demands regular reports about the state of the listed World Heritage assets. It also allows statements about sustainable regional development and can be the basis for early recognition of threats to the outstanding qualities. Monitoring programmes face three major challenges: first, great care must be taken in defining the target qualities to be monitored or the monitoring would remain vague. Secondly, the selection of ideal indicators to describe these qualities is impeded by inadequate data quality and availability, compromises are inevitable. Thirdly, there is always an element of insecurity in the interpretation of the results as to what influences and determines the changes in the target qualities. The first survey of the monitoring programme confirmed the exceptional qualities of the region and also highlighted problematic issues.

Improvement of antischistosomal activity of praziquantel by incorporation into phosphatidylcholine-containing liposomes

Praziquantel (PZQ) is effective against all known species of Schistosomes that infect humans. The failure of mass treatment of schistosomiasis has been attributed to the fact that therapy is not sufficiently long-lasting. This effect may be due to the low bioavailability of PZQ that has a low hydrosolubility and fast metabolism. Liposomes have been used to prolong drug levels. reduce the side effects, direct drugs to specific sites and increase bioavailability after administration. The aim of this work was to study the effect of phosphatidylcholine (PC)-containing liposomes to vehiculate PZQ to improve the treatment of schistosomiasis. The in vitro Study was carried out using Schistosoma mansoni parasites recovered by perfusion from the hepatic portal system of infected mice. Suspensions of liposomes with PZQ and free PZQ were administered p.o. in mice after 14 days of infection. The effect of both preparations in vitro on S. mansoni culture was similar. In the in vivo test, PZQ-liposomes caused a decrease in amounts of eggs and parasites. Liposomes improve the antischistosomal activity of praziquantel. This can be used as a starting point to investigate alternative administration routes or dosage forms and to examine the mechanism of intestinal absorption of PRZ © 2005 Elsevier B.V. All rights reserved.

Mejora del comportamiento térmico de los morteros de cal aditivados y su empleo en la rehabilitación de inmuebles = Improvement of thermal behaviour of additived lime mortars and their use in rehabilitation of buildings

La envolvente de la edificación es la responsable de equilibrar el intercambio energético entre el interior y el exterior, por lo tanto cualquier actuación encaminada a la reducción del consumo energético ha de establecer, como uno de sus objetivos prioritarios, la mejora del comportamiento de la misma. Las edificaciones anteriores a 1940 constituyen la mayor parte de las existentes en áreas rurales y centros urbanos. En ellas, la repercusión de la fachada sobre las transmitancias globales pone de manifiesto la necesidad de intervención. Sin embargo, su elevada inercia térmica y los importantes saltos térmicos característicos de gran parte de España plantean la importancia de que aquélla se efectúe por el exterior. A tal respecto, la falta de disponibilidad de espesor suficiente para implantar sistemas tipo SATE deriva en que, frecuentemente, la única solución viable sea la de aislar por el interior perdiendo con ello la capacidad de acumulación térmica del muro y con el asociado riesgo de condensaciones. La amplia tradición en el empleo de revestimientos, especialmente en base de cal, permiten que éstos sean utilizados no sólo como elemento estético o de protección de la obra de fábrica antigua sino también para la mejora del comportamiento térmico del soporte, si se aprovecha el mecanismo de transmisión térmica por radiación. Éste es el objetivo de la presente Tesis Doctoral en la que se estudia la modificación de las propiedades radiantes de los morteros de revestimiento para la mejora de la eficiencia energética de las construcciones históricas, principalmente las constituidas por muros monolíticos, aunque podría ser de aplicación a otro tipo de construcciones compuestas por diversas capas. Como punto de partida, se estudió y revisó la documentación disponible sobre las investigaciones de las tres áreas científico-tecnológicas que convergen en la Tesis Doctoral: rehabilitación, material y comportamiento térmico, a partir de lo cual se comprobó la inexistencia de estudios similares al objeto de la presente Tesis Doctoral. Complementariamente, se analizaron los revestimientos en lo concerniente a los materiales que los constituyen, la composición de las mezclas y características de cada una de las capas así como al enfoque que, desde el punto de vista térmico, se estimaba más adecuado para la obtención de los objetivos propuestos. Basándonos en dichos análisis, se preseleccionaron ochenta materiales que fueron ensayados en términos de reflectancia y emisividad para elegir cuatro con los que se continuó la investigación. Éstos, junto con la cal elegida para la investigación y el árido marmóreo característico de la última capa de revestimiento, fueron caracterizados térmicamente, de forma pormenorizada, así como química y físicamente. Los fundamentos teóricos y los estudios preliminares desarrollados con distintos materiales, en estado fresco y endurecido, fueron empleados en la dosificación de componentes de las mezclas, en dos proporciones distintas, para el estudio del efecto del agregado. Éstas se ensayaron en estado fresco, para comprobar su adecuación de puesta en obra y prever su VI adherencia al soporte, así como en estado endurecido a 28 y 90 días de curado, para conocer las propiedades que permitieran prever su compatibilidad con aquél y estimar el alcance de la reducción de transferencias térmicas lograda. Además, se estudiaron las características generales de las mezclas que sirvieron para establecer correlaciones entre distintas propiedades y entender los resultados mecánicos, físicos (comportamiento frente al agua) y energéticos. Del estudio conjunto de las distintas propiedades analizadas se propusieron dos mezclas, una blanca y otra coloreada, cuyas características permiten garantizar la compatibilidad con la obra de fábrica antigua, desde el punto de vista físico y mecánico, y preservar la autenticidad de los revestimientos, en cuanto a la técnica de aplicación tradicional en sistemas multicapa. El comportamiento térmico de las mismas, sobre una obra de fábrica de 40 cm de espesor, se estimó, en estado estacionario y pseudo-transitorio, demostrándose reducciones del flujo térmico entre 16-48%, en condiciones de verano, y entre el 6-11%, en invierno, en función de la coloración y de la rugosidad de la superficie, en comparación con el empleo de la mezcla tradicional. Por lo que, se constata la viabilidad de los materiales compuestos propuestos y su adecuación al objetivo de la investigación. VII ABSTRACT The envelope is responsible for balancing the energy exchange between the inside and outside in buildings. For this reason, any action aimed at reducing energy consumption must establish, as one of its key priorities, its improvement. In rural areas and urban centers, most of the constructions were built before 1940. In them, the impact of the façade on the global transmittance highlights the need for intervention. However, its high thermal inertia and fluctuation of temperatures in the majority of Spain bring up that it should be placed outside the insulation. In this regard, the lack of availability of enough thickness to implement systems such as ETICS results in that often the only viable solution is to isolate the interior, losing thereby the wall’s heat storage capacity with the associated risk of condensation. The tradition in the use of renders, especially lime-based, allows us to use them not only as an aesthetic element or to protect the ancient masonry, but also for improved thermal performance of the support by taking advantage of the heat transfer mechanism by radiation. This is the aim of this Doctoral Thesis in which the modification of the radiative properties of lime mortars for renders to improve the energy efficiency of historic buildings, mainly composed of monolithic walls, is studied, although it could be applied to other structures composed of several layers. As a starting point, the available literature in the three scientific-technological areas that converge at the Doctoral Thesis: rehabilitation, material and thermal behaviour, was reviewed, and confirmed the absence of researches similar to this Doctoral Thesis. Additionally, the renders were studied with regard to the materials that constitute them, the composition of the mixtures and the characteristics of each layer, as well as to the approach which, from a thermal point of view, was deemed the most suitable for achieving the objectives sets. Based on thre aforementioned analysis, eighty materials tested in terms of reflectance and emissivity were pre-selected, to choose four with which the research was continued. Common marble sand, used in the last layer of the renders, together with the appointed materials and hydrated lime were characterized thermally, in detail, as well as chemically and physically. The theoretical bases and preliminary studies with different materials, in fresh and hardened state, were used in the dosage of the composition of the mixtures. In order to study their effect they were used in two different proportions, that is, ten mixtures in total. These were tested in their fresh state to evaluate their setting-up suitability and foresee their adhesion to the support, as well as in their hardened state, at 28 and 90 days of curing, to establish the properties which enabled us to anticipate their compatibility with the old masonry walls and estimate the scope of the reduction of heat transfers achieved. In addition, the general characteristics of the mixtures used to establish correlations and to understand the mechanical, physical and energy results were studied. Two mixtures, one white and one colored, were proposed as the result of the different properties analysed, whose characteristics allow the guarantee of mechanical and physical compatibility VIII with the old masonry and preserve the authenticity of the renders. The thermal behavior of both, applied on a masonry wall 40 cm thick, was estimated at a steady and pseudo-transient state, with heat flow reductions between 16-48% during summertime and 6-11% during wintertime, depending on the color and surface roughness, compared to the use of the traditional mixture. So, the viability of the proposed composite materials and their fitness to the aim of the research are established.

Preparação profissional em educação fisica : das leis a implementação dos curriculos

Universidade Estadual de Campinas . Faculdade de Educação Física

Some vocabulary and grammar for the analysis of multi-environment trials, as applied to the analysis of FPB and PPB trials

For the improvement of genetic material suitable for on farm use under low-input conditions, participatory and formal plant breeding strategies are frequently presented as competing options. A common frame of reference to phrase mechanisms and purposes related to breeding strategies will facilitate clearer descriptions of similarities and differences between participatory plant breeding and formal plant breeding. In this paper an attempt is made to develop such a common framework by means of a statistically inspired language that acknowledges the importance of both on farm trials and research centre trials as sources of information for on farm genetic improvement. Key concepts are the genetic correlation between environments, and the heterogeneity of phenotypic and genetic variance over environments. Classic selection response theory is taken as the starting point for the comparison of selection trials (on farm and research centre) with respect to the expected genetic improvement in a target environment (low-input farms). The variance-covariance parameters that form the input for selection response comparisons traditionally come from a mixed model fit to multi-environment trial data. In this paper we propose a recently developed class of mixed models, namely multiplicative mixed models, also called factor-analytic models, for modelling genetic variances and covariances (correlations). Mixed multiplicative models allow genetic variances and covariances to be dependent on quantitative descriptors of the environment, and confer a high flexibility in the choice of variance-covariance structure, without requiring the estimation of a prohibitively high number of parameters. As a result detailed considerations regarding selection response comparisons are facilitated. ne statistical machinery involved is illustrated on an example data set consisting of barley trials from the International Center for Agricultural Research in the Dry Areas (ICARDA). Analysis of the example data showed that participatory plant breeding and formal plant breeding are better interpreted as providing complementary rather than competing information.

Tratamento de cor em pós-produção televisiva: o caso da produtora de conteúdos SP Televisão

Dissertação apresentada à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Audiovisual e Multimédia.

A participação dos pais na escolaridade dos filhos: trabalho de casa e sucesso escolar

Dissertação de Mestrado, Ciências Sociais, 11 de Abril de 2014, Universidade dos Açores.

Inovação de técnicas administrativas para o melhoramento de desempenho das atividades organizacionais

Dissertação apresentada ao Instituto Politécnico do Porto - Instituto Superior de Contabilidade e Administração do Porto, para obtenção do Grau de Mestre em Assessoria e Administração de Organizações, sob orientação de Anabela Mesquita, PhD

Desatando os nós da solidão com laços de afeto: Intervenção psicossocial em contexto domiciliário

Apesar de haver diferenças de indivíduo para indivíduo, todas as pessoas se encontram num processo de envelhecimento, que se pretende que seja ativo e saudável. Porém, à medida que nos aproximamos da velhice, e por inúmeros fatores, a probabilidade da pessoa se sentir só, de ter sentimentos como a solidão, de estar isolada ou socialmente excluída, aumenta. Este relatório surge de um projeto desenhado e desenvolvido com pessoas que se sentiam sozinhas, sendo pessoas idosas ou com deficiência, e que, por esse motivo, foram encaminhadas para apoio domiciliário. Pretendeu-se assim colmatar algumas das necessidades quotidianas dessas pessoas, sendo relevante entender se esse apoio contribuiu para melhorar a qualidade de vida, evitar ou diminuir os momentos e sentimentos de solidão, através da (re)ativação de redes de apoio. O projeto “Desatando os nós da solidão com laços de afeto” foi, na medida das suas possibilidades, desenhado e desenvolvido com os participantes. Este projeto ramificou-se em três subprojetos, correspondendo cada um, de forma mais específica, às necessidades e aos problemas que cada pessoa sentia, tentando contribuir para a melhoria da qualidade de vida, recorrendo às potencialidades de cada um e aos recursos existentes na comunidade. É um projeto que terá continuidade, pois envolveu voluntários e técnicos da instituição e pessoas das redes de apoio mais próximas dos participantes, mas que já proporcionou algumas mudanças, sendo esse um ponto de partida para alcançar a utopia orientadora do projeto.

Aplicação da abordagem KAIZEN na produção de artigos de papelaria

No âmbito da unidade curricular Tese/Dissertação do 2ºano do Mestrado em Engenharia Eletrotécnica – Ramo Sistemas e Planeamento Industrial do Instituto Superior de Engenharia do Porto, o presente trabalho descreve o estágio curricular efetuado num projeto industrial de melhoria em parceria com o Kaizen Institute, uma empresa de consultoria operacional. Este projeto foi desenvolvido numa empresa de produção e redistribuição de artigos de papelaria e escritório, a Firmo AVS – Papeis e Papelaria,S.A.. O acordo efetuado entre o Kaizen Institute e a Firmo AVS foi o de promover e incutir a cultura da melhoria continua e da mudança de atitudes e comportamentos por parte dos colaboradores da Firmo, sendo que numa fase inicial o foco do projeto foi o departamento de produção de envelopes, designada por área piloto, expandindo-se posteriormente a metodologia Kaizen aos restantes departamentos. A realização deste projeto teve como objetivo a implementação de conceitos elementares de melhoria continua nomeadamente alguns pilares ou ferramentas do Total Flow Management (TFM) e do Kaizen Management System (KMS) na empresa Firmo, de forma a reduzir ou eliminar desperdícios, incremento do envolvimento dos colaboradores, melhoria da comunicação e trabalho em equipa, estandardização de processos produtivos, criação de normas de trabalho, utilização de ferramentas SMED para a redução de tempos improdutivos e aumento da produtividade. Várias foram as dificuldades presentes no terreno para a implementação destes objetivos mas com as diversas ferramentas e workshops realizados na organização, conseguiu-se o envolvimento de todos os colaboradores da organização e a obtenção de resultados satisfatórios nomeadamente ao nível da comunicação e trabalho em equipa, organização e limpeza dos postos de trabalho, standard work (normalização do trabalho), diminuição do lead time nos processos produtivos e consequente aumento de produtividade.