The co-evolution of development needs and IOR forms: development by committee in Bosnia

This work highlights opportunities and obstacles to success in four task forces typically found at different times in states of conflict, transition, and development. They include: refugee return, media issues, privatization of state-owned enterprises, and efforts to promote business development. Based on over 180 in-depth interviews and observations of dozens of meetings during five lengthy field research trips to the Bosnian region between 1999 and 2005, this manuscript analyzes how these four task forces differed in terms of context, strategy, organization, and management in an attempt to understand the co-evolution of international development needs and the interorganizational forms that address them.

Coastal development, coral reefs and marine life in Asia: Tourism's double-edged sword

A large proportion of the world's population, including those of Asian countries, live in close proximity to the coastline. Coastlines are being developed at a £aster rate than ever before and there is now a growing body of literature to show that such activities are affecting the quality of coastal ecosystems and its wildlife (see, for example, Jennings, 2004; Siler et al., 2014; Duke eta!., 2007). This in turn is impacting negatively on the fishing and the tourism industries, amongst others. Millions of people depend on these sectors for their livelihoods and, unsustainable development can only make the plight of those who rely on these resources worse. The tourism industry in the coastal regions is particularly at risk since the industry relies heavily on coastal ecosystems to attract visitors. This chapter discusses the strong links that exist between coastal development, tourism, marine ecosystems and its wildlife, drawing attention to two well-known species widely used in tourism, namely whales and sea turtles, and discussing their conservation in relation to tourism. The chapter is divided into six sections. The second section examines why it is important to strike a balance between coastal development and protecting ecosystems. In this section, we discuss the ma.ior identified causes of coastal ecosystem degradation from the published literature, and the third section focuses attention on tourism development in the Asian region, which is one of the major reasons for coastal degradation. A diagrammatic approach is used to illustrate that planning of coastal tourism development which takes into account environmental impacts could result in economic benefits to the areas and regions concerned. The negative impacts on tourism when coastal ecosystems are damaged are discussed in section four. Section five shows the economic benefits resulting from sea turtle and whale watching-based tourism in Australia, and section six examines tourism as a conservation tool. In this section, the differing experiences of sea turtle tourism in Sri Lanka and Australia are discussed based on our published work. The final section concludes.

Structure of columbin, a diterpenoid furanolactone from Tinospora cordifolia Miers

(1S,4R,5R,8S, IOR,12S)-4-Hydroxy-15,16-epoxycleroda-2,13 (16), 14-trieno- 17,12:18,1-biscarbolactone,C20H2206, Mr = 358.2, m.p. = 453-454 K,orthorhombic, P212121, a = 7.3869 (6), b = 11.986 (1),c=19.896(2) A, V=1761.65A 3, Z=4, D x=1.351, Din(by flotation)= 1.349gem -3, 2(CuKa)=1.5418 A, /l = 8.36 cm -1, F(000) = 760, T= 295 K,R = 0.0432 for 1662 observed reflections. Two terpenerings, two ~-lactones, two methyl groups, a tertiary hydroxyl group and a fl-substituted furan ring are present in the structure. The H atoms at C(12) and C(8) are a- and fl-oriented. The terpene ring A is locked into a boat conformation by the C(1)-C(4) lactone bridge. The furan ring is attached equatoriaUy at atom C(12). The hydroxyl group is involved in intramolecular hydrogen bonding.

Zerlegbare Netzkäfig-Pontonrahmen Technische Entwicklung des Instituts für Ostseefischerei

Im Institut für Ostseefischerei (IOR) werden zur Untersuchung der Überlebensfähigkeit von Discards und zur Zwischenhälterung von Laichdorschen mobile Fischhaltungsräume benötigt. In Pontonrahmen eingehängte Netzkäfige sind dafür erfahrungsgemäß eine einfache Lösung. Diese Hälterungseinrichtungen haben den Vorteil, daß sie bedarfsweise in ausgewählten Wasserreservoirs eingesetzt werden können. Sie sind als schwimmende Einheiten von Pegelschwankungen unabhängig und bei Aufrechterhaltung der Hälterungsfunktion flexibel im Standort. Aufgrund des häufigen Einsatzwechsels ergab sich im IOR die Notwendigkeit, eine leicht montierbare und transportable Netzkäfigeinheit zu konstruieren.

Quantitative Larvenanalyse des Rügenschen Frühjahrsherings in den Laichsaisons 1991 und 1992

Das bereits vom ehemaligen Institut für Hochseefischerei, Rostock, routinemäßig durchgeführte Heringslarvenprogramm im Greifswalder Bodden wird als Beitrag zur Bestandsschätzung des Rügenschen Frühjahrsherings (RFH) zunehmend unter ökologischen Gesichtspunkten im Institut für Ostseefischerei (IOR) in Kooperation mit der Universität Rostock (Fachbereich Biologie) weitergeführt. Die quantitative Larvenanalyse ermöglicht über den Anteil des aus dem Greifswalder Bodden stammenden Nachwuchses eine Voraussage über den Erfolg der in einem weitaus größeren Seegebiet (ICES SD 22+24) produzierten Nachwuchsjahresklassen. Vorliegende Publikation dokumentiert erste Ergebnisse hinsichtlich der Heringslarvenverteilung im Saisonverlauf 1991 und 1992.

不同能量的高电荷态Ar~(12+)离子辐照对Au纳米颗粒尺寸的影响

报道了在兰州重离子加速器国家实验室电子回旋共振离子源原子物理实验平台上,在室温(293.15K)条件下,用固定剂量(4.3×1011/cm2)的高电荷态40Ar12+离子,辐照沉积在厚度为300nm的金膜表面上、平均直径约为35.3nm的Au纳米颗粒,使其大小发生改变的实验结果.实验中,通过改变入射离子的引出电压,选择不同的能量,利用原子力显微镜(AFM)对辐照前后颗粒的形态和大小进行表征,系统地研究了辐照后Au纳米颗粒的平均直径R与入射离子能量E的变化关系.同时利用碰撞混合模型、熟化(OR)和反熟化(IOR)模型对实验结果进行了详尽地定性讨论.实验和理论均表明:存在临界能量E*,当EE*时,R随E的增大而减小.

Size modification of Au nanoparticles induced by slow highly charged ions Ar-40(q+) irradiation

Size modification of Au nanoparticles (NPs), deposited on the Au-thick film surface and irradiated by slow highly charged ions (SHCI) 40Arq+ (3 6 q 6 12) with fixed low dose of 4.3 1011 ions/cm2 and various energy ranging from 74.64 to 290.64 keV at room temperature (293.15 K), was investigated by atomic force microscopy (AFM) and transmission electron microscopy (TEM). The effect of projectile kinetic energy on the modified size of NPs was explored by an appropriate choice of the fixed process parameters such as ion flux, irradiation temperature, incident angle, irradiation time, etc. The morphological changes of NPs were interpreted by models involving collisional mixing, Ostwald ripening (OR) and inverse Ostwald ripening (IOR) of spherical NPs on a substrate. A critical kinetic energy as well as a critical potential energy of the projectile in the Au NPs size modification process were observed.

Avaliacao de genotipos de trigo em diferentes regioes triticolas do Parana, em solos sem aluminio, na safra de 1996.

O estado do Parana apresenta uma diversidade de clima, com invernos irregulares em relacao a precipitacoes pluviometricas e ocorrencia de geadas, e tambem, com relacao aos tipos de solos, que influem na adaptacao e no desempenho dos genotipos de trigo. Em vista disto, ha necessidade de um maior numero de cultivares, com caracteristicas diferenciadas para serem utilizadas pelos produtores. O presente trabalho tem por objetivo avaliar, nas zonas A e B, em solos com ate 5% de saturacao de aluminio, os novos genotipos de trigo criados pelas diferentes instituicoes que desenvolvem trabalhos de melhoramento genetico de trigo. Esta avaliacao e realizada pelo Instituto Agronomico do Parana (IAPAR), pelo Centro Nacional de Pesquisa de Soja (Embrapa Soja) e pela Cooperativa Central de Desenvolvimento Tecnologico e Economico (COODETEC), atraves da instalacao de diferentes ensaios de competicao de genotipos. Os resultados aqui relatados sao resultantes de dez experimentos do Ensaio Intermediario Paranaense (IPS), doze experimentos do Ensaio Centro-Sul Brasileiro (CSBS) e onze experimentos do Ensaio de Cultivares em Cultivo (ECS), para solos com ate 5% de saturacao de aluminio, instalados em 1996, em diferentes epocas, nas localidade de Cambara, Londrina, Engenheiro Beltrao, Palotina e Sao Miguel do Iguacu. Devido a longa estiagem ocorrida no periodo de abril a julho, no Norte do estado (zona A1), alguns experimentos foram prejudicados e, outros perdidos. Em Londrina e Palotina, os experimentos receberam irrigacoes na fase inicial para propiciar uma boa germinacao e desenvolvimento das plantas. A incidencia de molestias foi baixa, em ambas as zonas predominando no entanto, uma razoavel infeccao de oidio, nas semeaduras mais tardias, e de ferrugem da folha. Observou-se uma variabilidade dos genotipos quanto ao grau de tolerancia e/ou suscetibilidade a estas molestias, como tambem, uma resposta no rendimento de graos ao controle destas, pelo uso de fungicidas especificos. Os rendimentos obtidos, em geral, foram muitos bons, alcancando, em alguns casos, a 6,7 t/ha. No ensaio IPS, em funcao do rendimento de graos e outras caracteristicas, foram selecionadas as linhagens IA 952, IWT 9430, LD 941, LD 946, OC 962, OC 963, OC 965, ORL 92203 e PR 961. NO CSBS, foram mantidas as linhagens IOR 90226 e PF 91450. No ECS, destacaram-se, em ambas as zonas, as cultivares IAPAR 60, IAPAR 78 e OR 1. Considerando os resultados de rendimentos de graos e outras caracteristicas agronomicas e, principalmente, a qualidade da farinha para panificacao, foram recomendadas como novas cultivares, as linhagens IDS 934-21 e OC 939, denominadas, respectivamente, de Manitoba 97 e COODETEC 101.

Cleanliness versus cow comfort – an insolvable problem?

Cubicle should provide good resting comfort as well as clean udders. Dairy cows in cubicle houses often face a restrictive environment with regard to resting behaviour, whereas cleanliness may still be impaired. This study aimed to determine reliable behavioural measures regarding resting comfort applicable in on-farm welfare assessments. Furthermore, relationships between cubicle design, cow sizes, management factors and udder cleanliness (namely teats and teat tips) were investigated. Altogether 15 resting measures were examined in terms of feasibility, inter-observer reliability (IOR) and consistency of results per farm over time. They were recorded during three farm visits on farms in Germany and Austria with cubicle, deep litter and tie stall systems. Seven measures occurred to infrequently to allow reliable recording within a limited observation time. IOR was generally acceptable to excellent except for 'collisions during lying down', which only showed good IOR after improvement of the definition. Only three measures were acceptably repeatable over time: 'duration of lying down', 'percentage of collisions during lying down' and 'percentage of cows lying partly or completely outside lying area'. These measures were evaluated as suitable animal based welfare measures regarding resting behaviour in the framework of an on-farm welfare assessment protocol. The second part of the thesis comprises a cross-sectional study on resting comfort and cow cleanliness including 23 Holstein Friesian dairy herds with very low within-farm variation in cubicle measures. Height at withers, shoulder width and diagonal body length were measured in 79-100 % of the cows (herd size 30 to115 cows). Based on the 25 % largest animals, compliance with recommendations for cubicle measures was calculated. Cleanliness of different body parts, the udder, teats and teat tips was assessed for each cow in the herd prior to morning milking. No significant correlation was found between udder soiling and teat or teat tip soiling on herd level. The final model of a stepwise regression regarding the percentage of dirty teats per farm explained 58.5 % the variance and contained four factors. Teat dipping after milking which might be associated with an overall clean and accurate management style, deep bedded cubicles, increasing cubicle maintenance times and decreasing compliance concerning total cubicle length predicted lower teat soiling. The final model concerning teat tip soiling explained 46.0 % of the variance and contained three factors. Increasing litter height in the rear part of the cubicle and increased alley soiling which is difficult to explain, predicted for less soiled teat tips, whereas increasing compliance concerning resting length was associated with higher percentages of dirty teat tips. The dependent variable ‘duration of lying down’ was analysed using again stepwise regression. The final model explained 54.8 % of the total variance. Lying down duration was significantly shorter in deep bedded cubicles. Further explanatory though not significant factors in the model were neck-rail height, deep bedding or comfort mattresses versus concrete floor or rubber mats and clearance height of side partitions. In the attempt to create a more comprehensive lying down measure, another analysis was carried out with percentage of ‘impaired lying down’ (i.e. events exceeding 6.3 seconds, with collisions or being interrupted) as dependent variable. The explanatory value of this final model was 41.3 %. An increase in partition length, in compliance concerning cubicle width and the presence of straw within bedding predicted a lower proportion of impaired lying down. The effect of partition length is difficult to interpret, but partition length and height were positively correlated on the study farms, possibly leading to a bigger zone of clear space for pelvis freedom. No associations could be found between impaired lying down and teat or teat tip soiling. Altogether, in agreement with earlier studies it was found that cubicle dimensions in practice are often inadequate with regard to the body dimensions of the cows, leading to high proportions of impaired lying down behaviour, whereas teat cleanliness is still unsatisfactory. Connections between cleanliness and cow comfort are far from simplistic. Especially the relationship between cubicle characteristics and lying down behaviour apparently is very complex, so that it is difficult to identify single influential factors that are valid for all farm situations. However, based on the results of the present study the use of deep bedded cubicles can be recommended as well as improved management with special regard to cubicle and litter maintenance in order to achieve both better resting comfort and teat cleanliness.

Estudo paramétrico da segregação gravitacional na injeção contínua de vapor

Steam injection is the most used method of additional recovery for the extraction of heavy oil. In this type procedure is common to happen gravitational segregation and this phenomenon can affect the production of oil and therefore, it shoulds be considered in the projects of continuous steam injection. For many years, the gravitational segregation was not adequately considered in the calculation procedures in Reservoir Engineering. The effect of the gravity causes the segregation of fluids inside the porous media according to their densities. The results of simulation arising from reservoirs could provide the ability to deal with the gravity, and it became apparent that the effects of the gravity could significantly affect the performance of the reservoir. It know that the gravitational segregation can happen in almost every case where there is injection of light fluid, specially the steam, and occurs with greater intensity for viscous oil reservoirs. This work discusses the influence of some parameters of the rock-reservoir in segregation as viscosity, permeability, thickness, cover gas, porosity. From a model that shows the phenomenon with greater intensity, optimized some operational parameters as the rate flow rate steam, distance between the wells injector-producer, and interval of completion which contributed to the reduction in gravity override, thus increasing the oil recovery. It was shown a greater technical-economic viability for the model of distance between the wells 100 m. The analysis was performed using the simulator of CMG (Computer Modeling Group-Stars 2007.11, in which was observed by iterating between studied variables in heavy oil reservoirs with similar characteristics to Brazilian Northeast

Estudo paramétrico da recuperação de óleo no processo de drenagem gravitacional com injeção de CO2

The gas injection has become the most important IOR process in the United States. Furthermore, the year 2006 marks the first time the gas injection IOR production has surpassed that of steam injection. In Brazil, the installation of a petrochemical complex in the Northeast of Brazil (Bahia State) offers opportunities for the injection of gases in the fields located in the Recôncavo Basin. Field-scale gas injection applications have almost always been associated with design and operational difficulties. The mobility ratio, which controls the volumetric sweep, between the injected gas and displaced oil bank in gas processes, is typically unfavorable due to the relatively low viscosity of the injected gas. Furthermore, the difference between their densities results in severe gravity segregation of fluids in the reservoirs, consequently leading to poor control in the volumetric sweep. Nowadays, from the above applications of gas injection, the WAG process is most popular. However, in attempting to solve the mobility problems, the WAG process gives rise to other problems associated with increased water saturation in the reservoir including diminished gas injectivity and increased competition to the flow of oil. The low field performance of WAG floods with oil recoveries in the range of 5-10% is a clear indication of these problems. In order to find na effective alternative to WAG, the Gas Assisted Gravity Drainage (GAGD) was developed. This process is designed to take advantage of gravity force to allow vertical segregation between the injected CO2 and reservoir crude oil due to their density difference. This process consists of placing horizontal producers near the bottom of the pay zone and injecting gás through existing vertical wells in field. Homogeneous models were used in this work which can be extrapolated to commercial application for fields located in the Northeast of Brazil. The simulations were performed in a CMG simulator, the STARS 2007.11, where some parameters and their interactions were analyzed. The results have shown that the CO2 injection in GAGD process increased significantly the rate and the final recovery of oil

Estudo paramétrico da recuperação de petróleo pesado por aquecimento eletromagnético resistivo

Electrical resistive heating (ERH) is a thermal method used to improve oil recovery. It can increase oil rate and oil recovery due to temperature increase caused by electrical current passage through oil zone. ERH has some advantage compared with well-known thermal methods such as continuous steam flood, presenting low-water production. This method can be applied to reservoirs with different characteristics and initial reservoir conditions. Commercial software was used to test several cases using a semi-synthetic homogeneous reservoir with some characteristics as found in northeast Brazilian basins. It was realized a sensitivity analysis of some reservoir parameters, such as: oil zone, aquifer presence, gas cap presence and oil saturation on oil recovery and energy consumption. Then it was tested several cases studying the electrical variables considered more important in the process, such as: voltage, electrical configurations and electrodes positions. Energy optimization by electrodes voltage levels changes and electrical settings modify the intensity and the electrical current distribution in oil zone and, consequently, their influences in reservoir temperature reached at some regions. Results show which reservoir parameters were significant in order to improve oil recovery and energy requirement in for each reservoir. Most significant parameters on oil recovery and electrical energy delivered were oil thickness, presence of aquifer, presence of gas cap, voltage, electrical configuration and electrodes positions. Factors such as: connate water, water salinity and relative permeability to water at irreducible oil saturation had low influence on oil recovery but had some influence in energy requirements. It was possible to optimize energy consumption and oil recovery by electrical variables. Energy requirements can decrease by changing electrodes voltages during the process. This application can be extended to heavy oil reservoirs of high depth, such as offshore fields, where nowadays it is not applicable any conventional thermal process such as steam flooding

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2