Aerodynamic load characteristics evaluation and tri-axial performance testing on fiber reinforced polymer connections and metal fasteners to promote hurricane damage mitigation

Damages during extreme wind events highlight the weaknesses of mechanical fasteners at the roof-to-wall connections in residential timber frame buildings. The allowable capacity of the metal fasteners is based on results of unidirectional component testing that do not simulate realistic tri-axial aerodynamic loading effects. The first objective of this research was to simulate hurricane effects and study hurricane-structure interaction at full-scale, facilitating better understanding of the combined impacts of wind, rain, and debris on inter-component connections at spatial and temporal scales. The second objective was to evaluate the performance of a non-intrusive roof-to-wall connection system using fiber reinforced polymer (FRP) materials and compare its load capacity to the capacity of an existing metal fastener under simulated aerodynamic loads. ^ The Wall of Wind (WoW) testing performed using FRP connections on a one-story gable-roof timber structure instrumented with a variety of sensors, was used to create a database on aerodynamic and aero-hydrodynamic loading on roof-to-wall connections tested under several parameters: angles of attack, wind-turbulence content, internal pressure conditions, with and without effects of rain. Based on the aerodynamic loading results obtained from WoW tests, sets of three force components (tri-axial mean loads) were combined into a series of resultant mean forces, which were used to test the FRP and metal connections in the structures laboratory up to failure. A new component testing system and test protocol were developed for testing fasteners under simulated triaxial loading as opposed to uni-axial loading. The tri-axial and uni-axial test results were compared for hurricane clips. Also, comparison was made between tri-axial load capacity of FRP and metal connections. ^ The research findings demonstrate that the FRP connection is a viable option for use in timber roof-to-wall connection system. Findings also confirm that current testing methods of mechanical fasteners tend to overestimate the actual load capacities of a connector. Additionally, the research also contributes to the development a new testing protocol for fasteners using tri-axial simultaneous loads based on the aerodynamic database obtained from the WoW testing. ^

Aerodynamic Load Characteristics Evaluation and Tri-Axial Performance Testing on Fiber Reinforced Polymer Connections and Metal Fasteners to Promote Hurricane Damage Mitigation

Damages during extreme wind events highlight the weaknesses of mechanical fasteners at the roof-to-wall connections in residential timber frame buildings. The allowable capacity of the metal fasteners is based on results of unidirectional component testing that do not simulate realistic tri-axial aerodynamic loading effects. The first objective of this research was to simulate hurricane effects and study hurricane-structure interaction at full-scale, facilitating better understanding of the combined impacts of wind, rain, and debris on inter-component connections at spatial and temporal scales. The second objective was to evaluate the performance of a non-intrusive roof-to-wall connection system using fiber reinforced polymer (FRP) materials and compare its load capacity to the capacity of an existing metal fastener under simulated aerodynamic loads. The Wall of Wind (WoW) testing performed using FRP connections on a one-story gable-roof timber structure instrumented with a variety of sensors, was used to create a database on aerodynamic and aero-hydrodynamic loading on roof-to-wall connections tested under several parameters: angles of attack, wind-turbulence content, internal pressure conditions, with and without effects of rain. Based on the aerodynamic loading results obtained from WoW tests, sets of three force components (tri-axial mean loads) were combined into a series of resultant mean forces, which were used to test the FRP and metal connections in the structures laboratory up to failure. A new component testing system and test protocol were developed for testing fasteners under simulated tri-axial loading as opposed to uni-axial loading. The tri-axial and uni-axial test results were compared for hurricane clips. Also, comparison was made between tri-axial load capacity of FRP and metal connections. The research findings demonstrate that the FRP connection is a viable option for use in timber roof-to-wall connection system. Findings also confirm that current testing methods of mechanical fasteners tend to overestimate the actual load capacities of a connector. Additionally, the research also contributes to the development a new testing protocol for fasteners using tri-axial simultaneous loads based on the aerodynamic database obtained from the WoW testing.

La nocturnitat en la il·luminació dels clips musicals actuals

Peer-reviewed

Controle dos vasos renais usando clips vasculares e fio cirúrgico em nefrectomias vídeo-assistidas de doadores vivos

OBJETIVO: A nefrectomia laparoscópica em doadores vivos para transplante renal vem assumindo um papel importante na era das cirurgias minimamente invasivas, acarretando menor morbidade aos doadores, e resultados semelhantes à técnica aberta no que se refere ao enxerto renal. O objetivo do presente artigo é relatar a experiência do nosso serviço utilizando a técnica de controle dos vasos renais usando fio cirúrgico e clips vasculares. MÉTODO: Foram realizadas 45 nefrectomias utilizando a técnica vídeo-assistida, com ligadura dos vasos renais com clips de titânio (LT-300) e fio cirúrgico. As variáveis analisadas foram tempo cirúrgico, perda sangüínea, tempo de isquemia quente, permanência hospitalar, necessidade de conversão e complicações. RESULTADOS: O procedimento foi realizado com sucesso em todos os casos. O tempo cirúrgico médio foi de 118 minutos, com perda sangüínea estimada em 84ml e tempo de isquemia quente de 4,3 minutos. Dois casos de íleo prolongado, uma lesão de veia gonadal, um escape de artéria renal e uma necrose de ureter foram observados. A permanência hospitalar média foi de 3,7 dias. O uso de clips vasculares e fio cirúrgico reduziu a perda de tecido venoso comparado à técnica com staplers e gerou redução de custos. CONCLUSÕES: A nefrectomia vídeo-assistida com a técnica descrita é factível e mostrou ser efetiva na contenção de gastos e na redução de tecido venoso perdido.

Orographic Enhancement of Precipitation inside Hurricane Dean

On 17 August 2007, the center of Hurricane Dean passed within 92 km of the mountainous island of Dominica in the West Indies. Despite its distance from the island and its category 1–2 state, Dean brought significant total precipitation exceeding 500 mm and caused numerous landslides. Four rain gauges, a Moderate Resolution Imaging Spectroradiometer (MODIS) image, and 5-min radar scans from Guadeloupe and Martinique are used to determine the storm’s structure and the mountains’ effect on precipitation. The encounter is best described in three phases: (i) an east-northeast dry flow with three isolated drifting cells; (ii) a brief passage of the narrow outer rainband; and (iii) an extended period with south-southeast airflow in a nearly stationary spiral rainband. In this final phase, from 1100 to 2400 UTC, heavy rainfall from the stationary rainband was doubled by orographic enhancement. This enhancement pushed the sloping soils past the landslide threshold. The enhancement was caused by a modified seeder–feeder accretion mechanism that created a “dipole” pattern of precipitation, including a dry zone over the ocean in the lee. In contrast to normal trade-wind conditions, no terrain triggering of convection was identified in the hurricane environment.

How level and type of deafness affects user perception of multimedia video clips

Our research investigates the impact that hearing has on the perception of digital video clips, with and without captions, by discussing how hearing loss, captions and deafness type affects user QoP (Quality of Perception). QoP encompasses not only a user's satisfaction with the quality of a multimedia presentation, but also their ability to analyse, synthesise and assimilate informational content of multimedia . Results show that hearing has a significant effect on participants’ ability to assimilate information, independent of video type and use of captions. It is shown that captions do not necessarily provide deaf users with a ‘greater level of information’ from video, but cause a change in user QoP, depending on deafness type, which provides a ‘greater level of context of the video’. It is also shown that post-lingual mild and moderately deaf participants predict less accurately their level of information assimilation than post-lingual profoundly deaf participants, despite residual hearing. A positive correlation was identified between level of enjoyment (LOE) and self-predicted level of information assimilation (PIA), independent of hearing level or hearing type. When this is considered in a QoP quality framework, it puts into question how the user perceives certain factors, such as ‘informative’ and ‘quality’.

Impact of captions on deaf and hearing perception of multimedia video clips

We investigate the impact of captions on deaf and hearing perception of multimedia video clips. We measure perception using a parameter called Quality of Perception (QoP), which encompasses not only a user's satisfaction with multimedia clips, but also his/her ability to perceive, synthesise and analyse the informational content of such presentations. By studying perceptual diversity, it is our aim to identify trends that will help future implementation of adaptive multimedia technologies. Results show that although hearing level has a significant affect on information assimilation, the effect of captions is not significant on the objective level of information assimilated. Deaf participants predict that captions significantly improve their level of information assimilation, although no significant objective improvement was measured. The level of enjoyment is unaffected by a participant’s level of hearing or use of captions.

Weather: Hurricane Threats

Severe tropical cyclones (called hurricanes in the North Atlantic and northeast Pacific) can cause loss of human lives and serious economic damage. In his Perspective, Bengtsson charts the current knowledge about how hurricanes form and whether long-term trends can be discerned in the past century or predicted for a future warmer planet. He also discusses the report by Goldenberg et al., who have analyzed hurricane activity in the North Atlantic and the Caribbean over much of the past century.

Hurricane-type vortices in a general circulation model

A very high resolution atmospheric general circulation model, T106-L19, has been used for the simulation of hurricanes in a multi-year numerical experiment. Individual storms as well as their geographical and seasonal distribution agree remarkably well with observations. In spite of the fact that only the thermal and dynamical structure of the storms have been used as criteria of their identification, practically all of them occur in areas where the sea surface temperature is higher or equal to 26 °C. There are considerable variations from year to year in the number of storms in spite of the fact that there are no interannual variations in the SST pattern. It is found that the number of storms in particular areas appear to depend on the intensity of the Hadley-Walker cell. The result is clearly resolution-dependant. At lower horizonal resolution, T42, for example, the intensity of the storms is significantly reduced and their overall structure is less realistic, including their vertical form and extent.

Simulation of hurricane-type vortices in a general circulation model

A study of intense hurricane-type vortices in the ECMWF operational model is reported. These vortices develop around day 4 in the forecast and occur in the tropical belt in areas and at times where intense tropical cyclones normally occur. The frequency resembles that observed over most tropical regions with a pronounced maximum in the western North Pacific. The life time of the vortices and their 3-dimensional structure agree in some fundamental way with observations although, because of the resolution, the systems are less intense than the observed ones. The general large-scale conditions for active and inactive cyclone periods are discussed. The model cyclones are sensitive to the sea-surface temperature and do not develop with sea surface temperatures lower than 28–29°C. The dynamical conditions favouring cyclone development are characterized by intense large-scale divergence in the upper troposphere. Cyclogenesis appears to take place when these conditions are found outside the equatorial zone and over oceans where the water is sufficiently warm.