Efeitos de formulações e intervalos sem chuva na absorção, translocação e eficácia de Glyphosate e 2,4-D

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simultaneous voltammetric determination of four triazine herbicides in water samples with the aid of chemometrics

A novel differential pulse voltammetry (DPV) method was developed for the simultaneous analysis of herbicides in water. A mixture of four herbicides, atrazine, simazine, propazine and terbuthylazine was analyzed simultaneously and the complex, overlapping DPV voltammograms were resolved by several chemometrics methods such as partial least squares (PLS), principal component regression (PCR) and principal component–artificial networks (PC–ANN). The complex profiles of the voltammograms collected from a synthetic set of samples were best resolved with the use of the PC–ANN method, and the best predictions of the concentrations of the analytes were obtained with the PC-ANN model (%RPET = 6.1 and average %Recovery = 99.0). The new method was also used for analysis of real samples, and the obtained results were compared well with those from the GC-MS technique. Such conclusions suggest that the novel method is a viable alternative to the other commonly used methods such as GC, HPLC and GC-MS.

Weed control in dry direct-seeded rice using tank mixtures of herbicides in South Asia

Dry direct-seeded rice (DSR) faces with complex weed problems particularly when farmers missed pre-emergence herbicide applications. Thus, an effective and strategic weed control in DSR is often required with available options of post-emergence herbicides. In such situations, tank mixtures of herbicides may provide broad spectrum weed control in DSR. Field experiments were conducted in the wet seasons of 2013 and 2014 to study weed control in response to tank mixtures of herbicides currently applied in DSR in South Asia. Results revealed that the tank mixtures of the currently available herbicides (azimsulfuron plus bispyribac or fenoxaprop, bispyribac plus fenoxaprop, and azimsulfuron plus bispyribac plus fenoxaprop; all applied as post-emergence) rarely resulted in antagonistic effects. Highest weed control efficiency (∼98%) was recorded with the tank mixture of azimsulfuron plus bispyribac plus fenoxaprop during both the years. This treatment also produced highest grain yield (7.2 t ha−1 in 2013 and 7.9 t ha−1in 2014), which was similar to the grain yield in the plots treated with the tank mix of azimsulfuron plus fenoxaprop, pendimethalin (applied as pre-emergence) followed by (fb) bispyribac, pendimethalin fb fenoxaprop, as well as pendimethalin fb azimsulfuron. Plots treated with the post-emergence application of single herbicide (i.e., azimsulfuron, bispyribac, or fenoxaprop) had lower grain yield (3.0–5.2 t ha−1 in 2013 to 3.5–6.1 t ha−1in 2014) than all the sequential herbicide treatments and tank mixtures (azimsulfuron plus fenoxaprop and azimsulfuron plus bispyribac), owing to a broad spectrum weed control. The study suggested that if farmers missed the pre-emergence application of herbicides (e.g., pendimethalin) due to erratic rains or due to other reasons, good weed control and high yield can still be obtained with tank mix applications of azimsulfuron plus fenoxaprop or azimsulfuron plus bispyribac plus fenoxaprop in DSR.

Genotoxic risk of herbicides to Anguilla anguilla L.

No contexto dos contaminantes aquáticos, os herbicidas são considerados como um dos grupos mais perigosos. Uma vez aplicados, estes são facilmente transportados para cursos de água, quer devido a uma pulverização pouco cuidada ou devido a fenómenos de escorrência superficial e/ou subterrânea. A presença destes agroquímicos no ambiente tem vindo a ser associada a efeitos nefastos em organismos não-alvo, como é o caso dos peixes. Contudo, existe ainda uma grande lacuna no que diz respeito à informação científica relacionada com o seu impacto genotóxico. Deste modo, a presente tese foi delineada com o intuito de avaliar o risco genotóxico em peixes de duas formulações de herbicidas: o Roundup®, que tem como princípio activo o glifosato, e o Garlon®, que apresenta o triclopir na base da sua constituição, produtos estes largamente utilizados na limpeza de campos agrícolas, assim como em florestas. Foi ainda planeado desenvolver uma base de conhecimento no que diz respeito aos mecanismos de dano do ADN. Como último objectivo, pretendeu-se contribuir para a mitigação dos efeitos dos agroquímicos no biota aquático, nomeadamente em peixes, fornecendo dados científicos no sentido de melhorar as práticas agrícolas e florestais. Este estudo foi realizado adoptando a enguia europeia (Anguilla anguilla L.) como organismo-teste, e submetendo-a a exposições de curta duração (1 e 3 dias) dos produtos comerciais mencionados, em concentrações consideradas ambientalmente realistas. Para a avaliação da genotoxicidade foram aplicadas duas metodologias: o ensaio do cometa e o teste das anomalias nucleares eritrocíticas (ANE). Enquanto o ensaio do cometa detecta quebras na cadeia do ADN, um dano passível de ser reparado, o aparecimento das ANE revela lesões cromossomais, sinalizando um tipo de dano de difícil reparação. O ensaio do cometa foi ainda melhorado com uma nova etapa que incluiu a incubação com enzimas de reparação (FPG e EndoIII), permitindo perceber a ocorrência de dano oxidativo no ADN. No que diz respeito ao Roundup®, o envolvimento do sistema antioxidante como indicador de um estado próoxidante foi também alvo de estudo. Uma vez que as referidas formulações se apresentam sob a forma de misturas, o potencial genotóxico dos seus princípios activos foi também avaliado individualmente. No caso particular do Roundup®, também foram estudados o seu surfactante (amina polietoxilada; POEA) e o principal metabolito ambiental (ácido aminometilfosfórico; AMPA). Os resultados obtidos mostraram a capacidade do Roundup® em induzir tanto dano no ADN (em células de sangue, guelras e fígado) como dano cromossómico (em células de sangue). A investigação sobre o possível envolvimento do stresse oxidativo demonstrou que o tipo de dano no ADN varia com as concentrações testadas e com a duração da exposição. Deste modo, com o aumento do tempo de exposição, os processos relacionados com o envolvimento de espécies reactivas de oxigénio (ERO) ganharam preponderância como mecanismo de dano no ADN, facto que é corroborado pela activação do sistema antioxidante observado nas guelras, assim como pelo aumento dos sítios sensíveis a FPG em hepatócitos. O glifosato e o POEA foram também considerados genotóxicos. O POEA mostrou induzir uma maior extensão de dano no ADN, tanto comparado com o glifosato como com a mistura comercial. Apesar de ambos os componentes contribuirem para a genotoxicidade da formulação, a soma dos seus efeitos individuais nunca foi observada, apontando para um antagonismo entre eles e indicando que o POEA não aumenta o risco associado ao princípio activo. Deste modo, realça-se a necessidade de regulamentar limiares de segurança para todos os componentes da formulação, recomendando, em particular, a revisão da classificação do risco do POEA (actualmente classificado com “inerte”). Uma vez confirmada a capacidade do principal metabolito do glifosato – AMPA – em exercer dano no ADN assim como dano cromossómico, os produtos da degradação ambiental dos princípios activos assumem-se como um problema silencioso, realçando assim a importância de incluir o AMPA na avaliação do risco relacionado com herbicidas com base no glifosato. A formulação Garlon® e o seu princípio activo triclopir mostraram um claro potencial genotóxico. Adicionalmente, o Garlon® mostrou possuir um potencial genotóxico mais elevado do que o seu princípio activo. No entanto, a capacidade de infligir dano oxidativo no ADN não foi demonstrada para nenhum dos agentes. No que concerne à avaliação da progressão do dano após a remoção da fonte de contaminação, nem os peixes expostos a Roundup® nem os expostos a Garlon® conseguiram restaurar completamente a integridade do seu ADN ao fim de 14 dias. No que concerne ao Roundup®, o uso de enzimas de reparação de lesões específicas do ADN associado ao teste do cometa permitiu detectar um aparecimento tardio de dano oxidativo, indicando deste modo um decaimento progressivo da protecção antioxidante e ainda uma incapacidade de reparar este tipo de dano. O período de pós-exposição correspondente ao Garlon® revelou uma tendência de diminuição dos níveis de dano, apesar de nunca se observar uma completa recuperação. Ainda assim, foi evidente uma intervenção eficiente das enzimas de reparação do ADN, mais concretamente as direccionadas às purinas oxidadas. A avaliação das metodologias adoptadas tornou evidente que o procedimento base do ensaio do cometa, que detecta apenas o dano nãoespecífico no ADN, possui algumas limitações quando comparado com a metodologia que incluiu a incubação com as enzimas de reparação, uma vez que a última mostrou reduzir a possibilidade de ocorrência de resultados falsos negativos. Os dois parâmetros adoptados (ensaio do cometa e teste das ANE) demonstraram possuir aptidões complementares, sendo assim recomendado a sua utilização conjunta com vista a efectuar uma avaliação mais adequada do risco genotóxico. Globalmente, os resultados obtidos forneceram indicações de grande utilidade para as entidades reguladoras, contribuindo ainda para a (re)formulação de medidas de conservação do ambiente aquático. Neste sentido, os dados obtidos apontam para a importância da avaliação de risco dos herbicidas incluir testes de genotoxicidade. A magnitude de risco detectada para ambas as formulações adverte para a necessidade de adopção de medidas restritivas em relação à sua aplicação na proximidade de cursos de água. Como medidas mitigadoras de impactos ambientais, aponta-se o desenvolvimento de formulações que incorporem adjuvantes selecionados com base na sua baixa toxicidade.

Influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures

The objective of the present study was to analyze the influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures. The experimental plots were arranged in a pasture area in the district of Porto Esperidião (Mato Grosso, Brazil). In all of the treatments, the applications contained the herbicides aminopyralid and fluroxypyr (Dominum) at the dose of 2.5 L c.p. ha-1, including the adjuvant mineral oil (Joint Oil) at the dose of 1.0 L and a tracer to determine the deposition by high-performance liquid chromatography (HPLC) (rhodamine at a concentration of 0.6%). The experiment consisted of nine treatments that comprised the combinations of three spray volumes (20, 30 and 50 L ha-1) and three flight heights (10, 30 and 40 m). The results showed that, on average, there was a tendency for larger deposits for the smallest flight heights, with a significant difference between the heights of 10 and 40 m. There was no significant difference among the deposits obtained with the different spray mixture volumes.

Surface modification of alumina nanofibres for the selective adsorption of alachlor and imazaquin herbicides

The effective removal of pollutants using a thermally and chemically stable substrate that has controllable absorption properties is a goal of water treatment. In this study, the surfaces of thin alumina (γ-Al2O3) nanofibres were modified by the grafting either of two organosilane agents, 3-chloro-propyl-triethoxysilane (CPTES) and octyl-triethoxysilane (OTES). These modified materials were then trialed as absorbents for the removal of two herbicides, alachlor and imazaquin from water. The formation of organic groups during the functionalisation process established super hydrophobic sites on the surfaces of the nanofibres. This super hydrophobic group is a kind of protruding adsorption site which facilitates the intimate contact with the pollutants. OTES grafted substrate were shown to be more selective for alachlor while imazaquin selectivity is shown by the CPTES grafted substrate. Kinetics studies revealed that imazaquin was rapidly adsorbed on CPTES-modified surfaces. However, the adsorption of alachlor by OTES grafted surface was achieved more slowly.

Probabilistic subgroup identification using Bayesian finite mixture modelling : a case study in Parkinson’s disease phenotype identification

This article explores the use of probabilistic classification, namely finite mixture modelling, for identification of complex disease phenotypes, given cross-sectional data. In particular, if focuses on posterior probabilities of subgroup membership, a standard output of finite mixture modelling, and how the quantification of uncertainty in these probabilities can lead to more detailed analyses. Using a Bayesian approach, we describe two practical uses of this uncertainty: (i) as a means of describing a person’s membership to a single or multiple latent subgroups and (ii) as a means of describing identified subgroups by patient-centred covariates not included in model estimation. These proposed uses are demonstrated on a case study in Parkinson’s disease (PD), where latent subgroups are identified using multiple symptoms from the Unified Parkinson’s Disease Rating Scale (UPDRS).

Simultaneous voltammetric determination of three herbicides in food and water samples with the aid of chemometrics

Differential pulse stripping voltammetry method(DPSV) was applied to the determination of three herbicides, ametryn, cyanatryn, and dimethametryn. It was found that their voltammograms overlapped strongly, and it is difficult to determine these compounds individually from their mixtures. With the aid of chemometrics, classical least squares(CLS), principal component regression(PCR) and partial least squares(PLS), voltammogram resolution and quantitative analysis of the synthetic mixtures of the three compounds were successfully performed. The proposed method was also applied to the analysis of some real samples with satisfactory results.

Immobilised anatase on clay mineral particles as a photocatalyst for herbicides degradation

Materials consisting of anatase linked to Laponite particles were synthesized by the reaction of TiOSO4 with Laponite, and were used for the degradation of pesticides. All these materials were characterized by XRD, FTIR, Raman, TEM, specific surface area and porosity determinations. Based on the amount of photoactive phase per unit mass of the clay mineral, not based on the total weight of the catalysts, these porous catalysts were displaying a high degradation rate than commercial P25. The TiO2 immobilized clay mineral catalysts can sediment in few minutes and could be readily separated out from a slurry system after the photocatalytic reaction. Settling properties of these catalysts are enormously high in aqueous media in contrast to P25.

Optical and microscopic study of a polymer-nanotube mixture for organic photovoltaic applications

Organic solar cells based on bulk heterojunction between a conductive polymer and a carbon nanostructure offer potential advantages compared to conventional inorganic cells. Low cost, light weight, flexibility and high peak power per unit weight are all features that can be considered a reality for organic photovoltaics. Although polymer/carbon nanotubes solar cells have been proposed, only low power conversion efficiencies have been reached without addressing the mechanisms responsible for this poor performance. The purpose of this work is therefore to investigate the basic interaction between carbon nanotubes and poly(3-hexylthiophene) in order to demonstrate how this interaction affects the performance of photovoltaic devices. The outcomes of this study are the contributions made to the knowledge of the phenomena explaining the behaviour of electronic devices based on carbon nanotubes and poly(3-hexylthiophene). In this PhD, polymer thin films with the inclusion of uniformly distributed carbon nanotubes were deposited from solution and characterised. The bulk properties of the composites were studied with microscopy and spectroscopy techniques to provide evidence of higher degrees of polymer order when interacting with carbon nanotubes. Although bulk investigation techniques provided useful information about the interaction between the polymer and the nanotubes, clear evidence of the phenomena affecting the heterojunction formed between the two species was investigated at nanoscale. Identifying chirality-driven polymer assisted assembly on the carbon nanotube surface was one of the major achievements of this study. Moreover, the analysis of the electrical behaviour of the heterojunction between the polymer and the nanotube highlighted the charge transfer responsible for the low performance of photovoltaic devices. Polymer and carbon nanotube composite-based devices were fabricated and characterised in order to study their electronic properties. The carbon nanotube introduction in the polymer matrix evidenced a strong electrical conductivity enhancement but also a lower photoconductivity response. Moreover, the extension of pristine polymer device characterisation models to composites based devices evidenced the conduction mechanisms related to nanotubes. Finally, the introduction of carbon nanotubes in the polymer matrix was demonstrated to improve the pristine polymer solar cell performance and the spectral response even though the power conversion efficiency is still too low.